Always such a humble guy with stacks of info always making an effort to help others. Besides your great content Shawn, your persona is a great example to many, Thank you

@UnknownCoatings

Жыл бұрын

Hey thank you so much for this! I truly appreciate your kind words, and love to hear im making an impact!

for your question 6:40 , 70% cure means to get the maximum gloss appearance as well as to bind the 2nd coat together.

@johannbornman4000

Жыл бұрын

Thank you for that

Ya, you're my pic for sure, ninja flow time lapse works for sure while downloading your tech tips

The best powder coat finish i have ever seen. Wish you were here in India. Keep up the good work my friend ❤

Once again, love the video.

@UnknownCoatings

Жыл бұрын

always appreciate your support good sir!

Had me at slo mo and synth!

@UnknownCoatings

Жыл бұрын

man of the people they say!

That is a killer finish mate. Awesome work 👍

@UnknownCoatings

Жыл бұрын

than you so much!

Always learning from you! great video

@UnknownCoatings

Жыл бұрын

I love to hear it! THank you!

Always look forward to your videos, keep m coming.

@reedsmetalworks6664

Жыл бұрын

Agreed 👍

@UnknownCoatings

Жыл бұрын

thank you so much! Im trying to put out more and more content!

WAW. SUPER. AWESOME. TNKS

@UnknownCoatings

Жыл бұрын

thank you!

Nice job again Shaun. Like to see a new hypershift with crazy colors.

@UnknownCoatings

Жыл бұрын

Ive been working on a colorshift video actually!

Lovely job

@UnknownCoatings

Жыл бұрын

Thank you so much!

I was like 100 wohoo! Great video, thanks for passin along the info

@UnknownCoatings

Жыл бұрын

thank you so much!

Great Work!

@UnknownCoatings

Жыл бұрын

THank you so much!

Great work

@UnknownCoatings

Жыл бұрын

THank you!

Those look great

@UnknownCoatings

Жыл бұрын

Thank you so much!

Video suggestion. KV settings for hypersmooth or kool koat systems for 1 and 2 coats. Thanks!

@UnknownCoatings

Жыл бұрын

Ill see what I can do, I dont have either of those units so its tough

Look sweet !

@UnknownCoatings

Жыл бұрын

Thank you!!

Hey brother! This is looking minttttt. Love your work and would get all my stuff to you is I were anywhere close to your shop. I’ve got a question for ya. Building a Harley with gold theme this winter. Gonna get a bunch of stuff coated and am looking for that gold plated, super smooth and glossy finish for a bunch of the parts combined with the body panels being gunship gray and also some black into the color scheme. What would be your recommendation when it comes to certain powders to achieve this and is there any key questions to ask a powder coating shop in order to get the right results. Some of the parts are Gonna be in the engine bay for instance, but I do believe that I’ll have to get those parts hard anodized instead to handle the heat. Keep going man!🔥🏆

Not sure about the corona ring either lol I’ve shot with gema as well and never felt the need for it with everything having a really good finish anyway 🤷‍♂️ everything comes out way better with a doable coat in my opinion keep up the good work 👍👍👍

@UnknownCoatings

Жыл бұрын

yeah its a mixed bag! and thank you!

I love the look of black chrome. I have a 2016 Ford Escape titanium with boring silver wheels. I think the black chrome would look good with the Ruby Red Metallic exterior paint color. I just need to find a good powder coat company where i live in Canada.

@thehawk05

Жыл бұрын

They’ll look great on that colour. Whereabouts in Canada are you? Depending on where you are I might be able to suggest some places that I know do good work

@NewsThatMatterUsa

Жыл бұрын

I live just across the boarder in New York . Not sure where you are in Canada lol but if your any where near Cornwall I am only a few minutes across the river .

@MarkK01

Жыл бұрын

@@NewsThatMatterUsa I live no where near Ontario. I live in the Prairie Provence's.

@thehawk05

Жыл бұрын

@@MarkK01 Only shop I know of personally in the Prairies is Powder Works Inc. in Calgary, Alberta.

🔥🔥🔥🔥🔥🔥

@UnknownCoatings

Жыл бұрын

I appreciate it!

I’m in sammamish where in Seattle I have a few vintage flat track racing bike Bultaco Astros

@UnknownCoatings

Жыл бұрын

technically south of Seattle, Olympia lol

Man this looks great, just did my own set of wheels in this colour unfortunately I can’t say it came out as good. The colour is significantly darker and I got those little black dots on 3 of my 4 wheels and a bit of orange pealing after the clear. (After 2 coats the chrome and 1 of the clear) perhaps I went a little heavy on the coats. Any recommendations you might have to help I’d really appreciate to hear. As of now back to sending them out to be chemically stripped……

Great video! Do you think the clear coat is mandatory over the powder coat? If it's the case I'll ask the shop add a clear coat on top of powder coating!

Hi, what setting are you when applying clear vision?tia♥️

This kinda close to Enkeis SBC paint?

Is this supposed to be an actual black chrome? I got this powder to try for a project. Mine came out to look more like a charcoal, i didnt do the clear at that point. Is charcoal the color or did i mess up?

Nice Job! What settings are you using for these tied corners?

@UnknownCoatings

Жыл бұрын

I have a few videos about settings, check my youtube shorts! and thank you!

I would like to see Forged Charcoal | from Prismatic refinishing 3pcs wheels

@UnknownCoatings

Жыл бұрын

I think I have that in a video already!

👍🏾👍🏾👍🏾👍🏾

Always a great job. I did have a question that seems to have a split answer. Question: I bought a metallic powder and I love the color. It's just not metalic enough for me. I want to see more shimmer. More bling in the color. Can I mix more metal flakes in the powder? What would you suggest. What would give a base metalic color more vibrant sparkle?

@UnknownCoatings

3 ай бұрын

yes as long as the flake is safe at temperature. Some flake the color burns out at like 300 degrees F

@larryb4122

3 ай бұрын

@@UnknownCoatings Sweet.. All I needed to know.. Thank you!

Nice they look sick. Do you know where I could get this powder in Australia ??

@UnknownCoatings

Жыл бұрын

You can order from prismaticpowders they ship internationally

Hi, do you have a favorite translucent black color by Prismatic? I'm also interested in learning more about your gold plating services.

@UnknownCoatings

Жыл бұрын

hmm I dont have any I love. Black Chrome II probably.

Curious as to what settings you use for powder flow. I’ve got a 2B and my flow isn’t as consistent as yours

@UnknownCoatings

Жыл бұрын

check my youtube shorts, I ahve a video about settings, and it will fix your problem for sure!

Any thoughts on the Big Mouth nozzle Columbia Coatings sells? I have it and it seems to help but man does it use A LOT of powder.

@davidhaas2528

Жыл бұрын

Yeah I found the same, it takes a lot more powder to get it to stick right. Though it does seem to reduce back ionization issues. I'm fine with the extra powder waste personally, my biggest complaint is powder likes to stick on the inside of the nozzle. I find I have to shake it out often to avoid blobs of powder shooting onto the part.

@a802jz

Жыл бұрын

That nozzle does use more powder but it allows you to get close to the part to get into tight faraday areas, without getting back ionization. I use it all the time with my KK 2.0 DPW.

@UnknownCoatings

Жыл бұрын

as stated above, there are some issues but once you get used to using it, it does work well !

Hi, can you tell me the clear coat that you like? I couldn't understand something about Tigers bun...?

@UnknownCoatings

Жыл бұрын

Tiger Drylac has a product called Bengal CLear and its my favorite

If I was to two tone motorcycle wheels half purple and half green would I just spray half and then partially cure it and then spray the other half and wipe off the partially cured area then go back in oven and fully cure it?

@UnknownCoatings

Жыл бұрын

yes but you will want to make sure your colors can overlap without issue, I would suggest shooting a sample panel. I would also spray the "top" half first, that way you can let gravity help you get powder to just the other half when hanging

👋 When you say 70% cure, is it the dame temp just a shorter period of time in the oven?

@UnknownCoatings

Жыл бұрын

yes same temp but shorter time!

What is the best clear coat that I can buy just a few pounds of ? I know tyger I think I have to buy a minimum of 10 pounds which I am not at that level tho I know in the long run I would save money it’s about upfront cost right now and also storage . So what do you recommend for clear from any wheres I can buy just a few pounds ?

@UnknownCoatings

Жыл бұрын

you can get 5lbs from Tiger.

Do u sandblast every wheel even brand new and polished aluminum

@UnknownCoatings

Жыл бұрын

yes, powder requires a mechanical bond

Awesome video!!! Where are you located??

@UnknownCoatings

Жыл бұрын

Seattle area

Damn that looks good bro.im about to pull the trigger and buy a hot coat pcs1000.I've heard good reviews that it's a quality unit and you can run dual coats and metallic powders through it well.any info on this gun.have you ever used it before and would it be good for every day use like it claims.

@UnknownCoatings

Жыл бұрын

It's literally the worst gun you can get. It's casually referred to as the POS1000. Anyone who says it's a good unit has never used an even decent quality gun

@scooterboy304

Жыл бұрын

@@UnknownCoatings is there a quality gun for around a grand.

@UnknownCoatings

Жыл бұрын

@@scooterboy304 SOmething like an HS02

Can do a 24k gold look or a chrome gold

@UnknownCoatings

Жыл бұрын

yeah I posted a video of that recently!

Id like to see Merlin’s Potions

@UnknownCoatings

Жыл бұрын

This is a great color, let me see what I can come up with

First

How much powder is used when doing motorcycles 17 rims

@UnknownCoatings

Жыл бұрын

around a pound

What about black chrome 2 ? Can we see that

@UnknownCoatings

Жыл бұрын

absolutely!

How much does it cost to powder coat 2 Sportster wheels and how long does it take? Colors I would want is a high gloss black, with the most Holographic multicolor powder and clear?

@UnknownCoatings

Жыл бұрын

For me, im 3 weeks out. Cost will vary, ukcarmy @ gmail is the best way to get pricing

I assume the little black dots are like fisheyes?

@UnknownCoatings

Жыл бұрын

kind of but not in the traditional sense

We are looking to start a new powder coating company in Wylie, TX. Any marketing tips?

@UnknownCoatings

Жыл бұрын

Hit lots of car events, or events for whatever avenue you want to powder coat within. Find the popular cars or whatever and offer them free work to get your name out

That looks like a gunmetal finish to me. Looks nice though.

@UnknownCoatings

4 ай бұрын

Gunmetal is metallic in regards to powder coating

is it a gema gun or what?

@UnknownCoatings

Жыл бұрын

Yeah both a gema optiflex pro and optiflex 2b are in this video

Looks good. My only recommendation is to not coat the rotor hub surfaces.

@UnknownCoatings

Жыл бұрын

I ask each client (in this case a large motorcycle shop) and let them pick. But thanks.

@J.3.T.Z.

11 ай бұрын

No problem. I am only mentioning it because I powder coat as well and build motorcycles. That surface and the rotor is a critical fastener and you can't get a proper torque spec with powder and it will eventually loosen and cause the hole to wallow out. @@UnknownCoatings

Can you do Illusion blueberry , orange and red

@UnknownCoatings

Жыл бұрын

I have a video of illusions coming up!

@BlackIcee808

Жыл бұрын

@@UnknownCoatings word bet 💪🏾