It's crazy how much better your audio sounds in newer videos than some of the older ones. As a new fan that didn't realize how good I had it, thank you for getting better audio equipment.

I bought your plans and am using them (modified small for my space) and am buying the same saw. I think you are one of the most fun woodworkers to watch. Your enthusiasm and humor help motivate me. Be well and stay safe.

@John_Malecki

4 жыл бұрын

Adam. Thank you. That made my day and I’m glad you enjoy what I do! 💪🏻💪🏻

@jonathanliberati9363

4 жыл бұрын

Can't get enough of these videos. I need to stop out to see the shop. Only in beaver county!

@rsutton2929

2 жыл бұрын

John I’m trying to find your plans for this miter station. Can you please point me in the right direction of this awesome build? Thank you

John; I love your "home improvement videos" before your wedding; my house was also built in 1905

I absolutely love the overall setup, super simple and effective. Those trim guards in maple came out awesome!!!

That's a mighty fine chop station ya got there. I like that stop block track system, clean and simple. I think a nice addition would be to inlay a ruler on each side, one that reads left to right and one that reads right to left. Because even with all that storage, you know damn well you're gonna find yourself searching for that tape measure that likes to always disappear.

Love watching your videos. I used to do woodworking for 4-H with my grandpa when I was in high school. Watchkng your videos has got me back into doing it again. Thank you for that and all the great ideas and advice you have shared as well!

Love this build!! All the little antics and commentary are what makes your videos great! Can’t wait to see what else you have coming out!

I love the grain and edge detail you paid attention to for your cabinets. I'm always blown away by woodworkers on KZread ignoring details like that. For your dust collection though I can't help but feel like you would have way more success in terms of overall dust capture if you brought the dust collection in from the top since your current design is fighting the natural upward flow of the miter saw's dust port.

A lot of people on KZread that have carpentry channels don’t really sound like they know what their doing. But you sound like you know a lot, when I build stuff I watch your videos for some inspiration for joints, braces etc. Keep up the amazing work your super funny and entertaining

Love the Nathaniel Rateliff reference! Nice job as always!!

The festool miter saw has excellent dust collection.

Damn you, Malecki! Now I have another shop project to do...

i love this so much! This dude is the perfect mixture of Patriot, Craftsman, Idiot, Genius and lovable person. I can tell the dude knows what he´s doing, but things like building doors too big and then sanding them down until they fit seems like implementing extra steps to use more tools, because it´s more fun. I always just used to buid them to size.

Shop is really coming together nicely! Cool build with well thought out features. 👍🏼

I giddyed like a kid in a candy shop when I saw a 26 minute John Malecki video on my feed 😍

@John_Malecki

4 жыл бұрын

This may be the best comment of all time hahaha

@BigSauceOfficial

4 жыл бұрын

@@John_Malecki 😄 thanks for the best content of all time!

Even without the extraction, this is amazing seemingly quick work mate, fantastic!

I've never been so jealous of a shop until I saw this one.

To make the 1/4" plywood dust deflector easy, use some 3/4 plywood cut to the curve, screw the 1/4" plywood to the curve and set it in place

Buying the plan. I'll be building it next week. John that station is awesome. Love your videos .

Great set up ,Thanks for posting .

Dobra robota, Panie Malecki !! Pozdrawiam

I have the same saw and built a similar box around mine, ended up building doors that attach with magnets to focus the dust collection behind the blade. Dan Pattison also had a video improving the DC on the same saw.

@pgfollett

4 жыл бұрын

Dan's mod includes altering the dust port and the boot behind the blade. Very effective mods! I have both on my Bosch Glide; big improvement. Go to a 90 - 100 tooth blade as well to cut down the scatter-- huge difference.

"If at first you don't Succeed, keep on Sucking until you do." -Curly

WOW ... what a wonderful project!

I like the downdraft Idea. The wings it looks like youre trying at the end will likely help.

Great video content as usual! Love the humor. And great project! Would love to eventually have a setup like that, but for now with a small shop I'll hafta wait lol

Beautiful job man! Looks great, functional and it looks like you have enough storage for a few bodies

I got a hold of some of the clear plastic/rubber strips they use on walk in freezers and use that to frame around my miter saw. It keeps the dust in but easily moves out of the way when swinging or tilting the saw.

Nice build, hot mike. Have the same problem dust maker saw. Thanks you!

Turned out great John, awesome work! 😃👍🏻👊🏻

Epic Build John! Awesome station and video as always!

great video and a really cool setup. I actually think the curved piece might be hurting your dust collection, I know its to keep the airflow close to the saw, but i think its also acting as a deflector guiding the chips up and away from the vacuum ports before the suction can slow them down. if you just had the square box with the downdraft the chips wouldn't have such an easy path out and many would hit the back top, slowing them down and letting the suction grab hold

Just finding your channel John. Fantastic work and the humor is a huge plus. Keep up the good work👍

Love the Nathaniel Rateliff reference there

Amazing video! Wish we had the space for it 🤣

Nice build. Really dig the edge moulding and cabinets. I'm curious about the use for all those upright dividers.

Totally entertaining and goofy...Loved it!

"You don't need some crazy tools" cuts to a Festool montage. 🤣

@dt2419

3 жыл бұрын

I know this is a joke but for the three people in the world who don't actually get it, you don't need festool tools to do this stuff, they are just awesome.

Always enjoy watching your videos.

OTTIMO VIDEO ED AUDIO. DIVERTENTISSIMA PRESENTAZIONE DI UN BUON PROGETTO . OTTIMA LA REALIZZAZIONE. COMPLIMENTI. SALUTI SALVIO

I title this video, "To hell with dust collection!" Awesome video! 😂🤘🏽💯👍🏾

I was waiting for a fence/stop block system, I like the simplicity of the channel. Wish I had the room or really a reason to make one of these.

@John_Malecki

4 жыл бұрын

Fenceless ... Spagnoulo style ! 💪🏻

Adding subtitles could help some people (I saw the comments). That said, hot damn! Anyone can build boxes with doors, but you sir, solved the miter annoyance with that downdraft add-on. Well done. It works out nicely that I have the same miter saw. Subscribed.

Looks amazing! Nice work man.

Love the concept, was thinking about something similar and wanted to see if anyone had already done it. You win. One thought, throw an elbow and maybe a short length of hose onto the out port to encourage the dust toward the table. It may already be there, hard to tell in the final shots

Seems like your mic has been a little "off" the last few videos

@John_Malecki

4 жыл бұрын

we think it got wet. we replaced it and its better after the first minute

@JarrodBush-Creator

4 жыл бұрын

That and the white balance seems off. Kinda blown out. Cool project though 👍

@droy333

4 жыл бұрын

@@JarrodBush-Creator Blown out? White balance changes the colour/tone of an image no the brightness.

@chiebert290

4 жыл бұрын

@@John_Malecki I could make out that first sentence when you screamed at your saw.

@zafarsyed6437

4 жыл бұрын

@@John_Malecki Bud- I'm sorry to say you're gonna have to re-dub the 1st minute or so. There's several half sentences here and there, where the audio is muffled and hard to follow what you're saying (yeah, I'm probably half deaf) but still... might want to check it before uploading or re-record the audio separately. Besides that- great video!

Just stumbled on your channel, love it so far. I would recommend a face plate for the dust box, cut out just enough that your saw comes through it freely (use cardboard for an easy template). The better enclosed that box is, the more suction you will have for the dust to be pulled in.

I just started following you over here in Ireland, I love your stuff, great knowledge, I wish we could get lumber/slabs like whats available in the US. I'm hoping to get my first river table made before christmas, I may even post a pic if it goes well.

Glad to see you made another video keep them coming

Good stuff John!!

Looks good John!

Caught that Nathaniel Rateliff reference there at 13.55👍

Awesome video, like always!

My normal routine: "I cut this board 3 times and it is still too short!" That is why I need lots of Kreb and Bora things, aside from being a man and that is what we do, the right tool makes things easier. That includes setting up a shop so it is awesome.

Bad ass build as usual! I appreciate that you don't take yourself too serious but brother you have mad skill! Thank you for sharing another segment of your life and talent. I am in need of a miter saw station, this looks perfect. Have a great week!!

Thanks. Great ideas.

I love the build. I Love the long video. And I love the fact that I spent 20 minutes observing what a grown man with ADD looks like. Now I know what my friends mean when the speak about me... 🤪🤪

Good job love the whole video

@John Malecki Just a suggestion on the saw...I have the same one and removed the dust port completely. For me anyway this keeps the dust down lower and not up and out the dust chute. Still isn't perfect but might help you a little.

Semper Fi. Enjoyed the video.

Great content my man!!!!

that turned out really nice and I've got a few new ideas so thanks for the video! this is the first I've seen of you and I'm a subscriber now

I haven't found a single build it / DIY channel where I have loved and watched every video until I found yours. Thank you for the great content! Makes me more motivated to build and fixing up my place! #jill

Love the longer vids man!!! And i need the "Punch today in the face" shirt in my life.

@John_Malecki

4 жыл бұрын

Snag one up ! Linked in the description

Dig your channel John. My Bother in Law and his son are huge Steeler fans. I also wanted to say that I got your reference to Nathaniel Rateliff’s song😆🥃 Keep building!!!!

I have the same saw and have used a hose to collect the dust. Seemed to do ok to me. Your down draft would work better if the saw wasn’t sitting 4” above it- impossible I get it. I’m in the process of building a miter station. I may modify your down draft idea. Love the videos!!

I had a New Yankee flashback 🙌 for a few seconds there... “But before we do, remember this, there’s no more important safety rule than to wear these... safety glasses”. Liked and subscribed bro. 👍

You are brilliant, and so talented. And maybe a little hammy. ;). Love the drawer face cutouts and the sliding doors here…I always walk away from your videos with some kind of inspiration and ideas…thanks for sharing. Just building my first shop… ;)

Well done 👍👍👍👍

Has anyone tried a vacuum table type dust collector, for those saws. Just slant the bottom of the box down towards the back. Just an idea from a friend in the Steeler Nation. 😉

Very cool video. I am in the market for a new Compound Miter Saw. I have never owned one. A Dewalt is in the running, but I also like that Bosch that you use. Not only does it appear to be a space saver, but it also looks like it was designed by Cyberdyne. The people who in the future bring us the Terminator. Thanks again for the cool video.

Great project, Semper Fi !

muito bom!

Awesome shop, you must have a really good job those tools are $$$$$$$$$$$$$

FYI. Audio was not so great guys. But great project overall.

I follow you on Instagram bud, from the UK. Been waiting for this video to drop!

@John_Malecki

4 жыл бұрын

Here you go bud!

"You don't need some crazy tools" 5:04 .... proceeds to use a festool track saw in the next shot

@multidinero

4 жыл бұрын

I own a DeWalt Track saw, and I love it! One of my best purchases ever. Need to buy the cordless one next.

@sharpskull2476

4 жыл бұрын

@@multidinero yeah, but if you have the money, Festool is literally the best thing you can buy on the market for power tools, they will last you for a lifetime

@multidinero

4 жыл бұрын

@@sharpskull2476 I’ve owned most of my DeWalt tools for years without incident. I’m not saying that Festool is not great, as it’s expensive enough that it should be, but I can buy two of nearly anything else for the same price. I’m interested in a Domino, yet otherwise the other stuff they sell are similar to what I can buy from other sellers. Skill outpaces tools. My DeWalt is great.

Dude sounds like an athlete..

Don’t hold back the comedy, keep it comin

HEY JOHN !!! Chris Ramsey fellow KZreadr !! is looking for a Magical Tensegrity Table I’d love to see how resin would lay with his custom deck of cards !! Could be a cool gig

Had to laugh about the "gimmie a drink" Now I have that song stuck in my head.

Semper Fi.

Notice the “LITTLE GUY” is on the ground! That’s life boys!

Very cool vid and love the cabinets , can you give a hint in small shop with full slide mitre saw ? How can i make thats station?

In the Corp ? Semper Fi on the wall ? And Black Riffle Coffee Co....a Renaissance Man 😊

@John_Malecki

3 жыл бұрын

Nah we’re just patriots ! Support our troops and those who give ya opportunity to do what we do

Hey John, p/u my material this morning! Let the sawdust fly!

Insert audio comment here like everyone else. Badass miter station, will be building mine in the upcoming weeks. Keep up the good stuff!

@chuckkindstrand

4 жыл бұрын

Audio didn’t seem like a big deal to me, that was my point with the insert audio comment.

@John_Malecki

4 жыл бұрын

The beginning was bad . My mic got run thru the wash and we thought it wasnok

Makes my miter station look like garbage. Love it!

One thing I personally found cool is your bandsaw is covered in stickers. It's the one tool in my own shop on which I slap any sticker I receive. And the BRCC flag... yezz.

I have the same saw and I have been wondering if a zero clearance throat plate will help with directing the dust of just make it worse. Other than the terrible dusk collection it is a great saw.

Unexpected Fix This Build That cameo

Молодец,веселый парень!👍.

love your videos guys

Videos looking good so far. Anyone else have audio issues in the first minute and a half?

@aRndBelgianGuy

4 жыл бұрын

Yep I do

@AdamsLab

4 жыл бұрын

Mic is too hot.

@John_Malecki

4 жыл бұрын

The mic was dropped in some water , it was replaced and fixed. Couldnt pick those shots back up unfortunately. Audio is my nemesis right now haha

@aRndBelgianGuy

4 жыл бұрын

@@John_Malecki It does not affect the quality of the content ;-)

@AdamsLab

4 жыл бұрын

@@John_Malecki - It is everyone's.

I like how you just knocked this up. My sister trained as a furniture maker, she would never be able to do this! And the attention to detail shows how passionate you are, few people would build something like this for their workshop!

Great video. What was the sliding set up off the side of your table saw ??

@John_Malecki

4 жыл бұрын

That’s the sliding crosscut sled for my saw

I like you man! Hilarious!

You look into the Makita sliding miter saws? They’ve got small profiles for a sliding saw.

Finally someone who recognizes the value of a sliding miter saw. I swear the amount of people on here with million dollar workshops and a basic bitch miter saw.

@John_Malecki

4 жыл бұрын

I do like a good sliding miter saw

Great project. Did you use the sanded pine plywood from Home Depot? Alot of You Tubers use PureBond but I can't get that where I live.