I recently re-watched this video after having a frustrating Sunday trying to get back to newbie airbrushing after a long hiatus. The 80/20 mix put into the cup first (among all the other tips) is like a magic elixir. But its not magic, it's Vince's common sense and teaching that makes it work! So far I have sprayed and cleaned two colors back to back, and no jams. Thank you, Vince!

I rewatch these videos as Vince's teaching style is the same as my favourite Jr. High/ High school teachers. A respite from the insanity of the modern world.

@Mikey__R

Ай бұрын

Same!

I've consumed ALL of the airbrush tutorials today. I absolutely adored this one. It's not just informative but confidence-building. I don't know if it's the aggregate of all the videos I've seen or this one in particular but I actually feel prepared to bust out the airbrush I got as a birthday present that's been sitting under my desk for 8 months. Hell, I'm eager to do so after watching this breakdown and actually think I'm capable of really utilizing it. Thanks, Vince. You're a true patrician.

@VinceVenturella

2 жыл бұрын

Always happy to help brother. :)

@PerfectionHunter

Жыл бұрын

Agreed. I've watched most airbrush miniature-painting-tutorials and this is one of the most helpful out there. However, calling it "Ultimate guide" is stretching it way too far. I know he made more videos but he should have numbered them like: "Ultimate guide to the Airbrush 1, 2, 3, 4" etc. - Like what other equipment should i get? - And what about: "Before first use, do this". If you buy a new airbrush Always pick it apart as much as possible. Clean it. Everywhere. Use mini pipe cleaners. Then lubricate the surfaces where the o-rings sit with Glycerin and then "massage" the o-rings between your fingers and lubricate them with Glycerin. Put them back and shoot some paint thinner through with full air throttle to clear out any excess lube. Most paints have Glycerin added as a thinner so while Glycerin is pretty much less harmless to most paints, Never Ever use silicone oil on the o-rings in an airbrush, which is otherwise the standard lube for o-rings. Silicone oil/grease creeps and spreads like a plague over every surface and if micro-traces of it passes through the nozzle it will kill your paint cause it usually dissolve acrylic paint, among other things.

I've been really enjoying the new format with more direct-to-camera shots. Great stuff as always, Vince!

@der_mind_blender313

2 жыл бұрын

Same

@_lewtz

2 жыл бұрын

Agreed, I'm glad to see people doing tutorials and such again. A lot of people are "mini=tainment" now, and not so much learning anymore.

@VinceVenturella

2 жыл бұрын

Awesome, thank you! I will always focus on the teaching, but this is a nice format to also share some of my thoughts. :)

I got back into warhammer for the first time since I was a kid at the begeinning of Covid and can’t believe I’m just now finding your videos. Lots of other great KZreadrs but you are hands down the most informative, thanks for all the tips and info!

@VinceVenturella

2 жыл бұрын

Thank you, always happy to help. :)

Currently setting up a booth and my aircompressor to prime the first time ever this way. Thank you Vince

So glad you made this video! I'm getting super inspired by Marco's lighting effects but his videos expect a better mastery of the airbrush than I currently have

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

As always your videos are amazing and informative. Especially love your use of “extreme deltas”.

@VinceVenturella

2 жыл бұрын

Thank you very much!

Thanks Vince! Ive been using my airbrushes for about 2 years now so this was a nice refresher on all the basics. Stuff like this really helps out when you're just starting out! Love the paint job too, as per usual. Your stuff always is on point!!

@VinceVenturella

2 жыл бұрын

Thank you, always happy to help.

Having finally got a cheap airbrush, I can finally view these videos with more than mere curiosity. Makes them even better :)

@VinceVenturella

2 жыл бұрын

Awesome.

Thanks Vince - liking the back to basics.

@VinceVenturella

2 жыл бұрын

Happy to help :)

A timely video for me, as I've got several large dragons in my queue for this winter and was planning on really grinding my airbrush skills as I work them through. Thanks Vince! And those lightning wings are fricking cool....

@Karina-Loves-Andreas

2 жыл бұрын

Me too! Have two dragons "in queue" and 3 coming Tuesday!🤣. I am POSITIVE Vince won't mind me sharing this Squidmar video, but if you're doing Dragons, I GUARANTEE you'll appreciate the link I'm sharing. The title is something about "free hand", but it's actually about AMAZING dragon wings in an easy way (comes out like "Richard Grey" style, I had no idea how HIGH level painters got that until I ran across this!😁🐲💜). PS: Squidmar's "guest artist" starts the wings with airbrush!! kzread.info/dash/bejne/e6N_psOKoKbNl7A.html

@VinceVenturella

2 жыл бұрын

Thank you and always happy to help. :)

Really informative amazing stuff. Vince thank you a lot for all your vids. First dragon I'll make with my new airbrush will be made to your honor. You are the boss. Thank you again. Now i feel prepared to start with my airbrush.

It is not often I finish a video and felt it was absolutely useful with no time wasted. Thank you Sir for this high quality material. It will make a difference.

@VinceVenturella

2 жыл бұрын

Always happy to help :)

Was so exited when from all the beautiful dragon paintings on Warhammer Community site I liked Vince's one the most :D Great job!

@VinceVenturella

2 жыл бұрын

Thank you so much 😀

Another fantastic video guide. Thanks a lot, Vince!

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

Thank you for another high quality video Vince, please continue on your "Ultimate Guides" of instructional content- practical, to the point, and very timely.

@VinceVenturella

2 жыл бұрын

100% :)

Excellent tutorial, Vince! Thanks so much.

@VinceVenturella

2 жыл бұрын

Thank you!

Thanks again Vince. As always, a great new resource.

@VinceVenturella

2 жыл бұрын

My pleasure! :)

Hi Vince, I really appreciate everything you do - no-nonsense perfect advice I know I can alwats trust. You are one of the few people who also suggest beginners using airbrush which I think is a good idea - especially for priming! So much healthier to stay away from those solvent spray cans too

Outstanding breakdown of airbrush basics. Me and my team took a shot Everytime u said tool and we are all tipsy. Cheers brother.

@VinceVenturella

2 жыл бұрын

Always happy to help, and drinking games with my videos are all very dangerous. ;)

As somebody who's been airbrushing miniatures for several years now this is still great to go back over some of the basics that you forget and even just to see some really nice high end technique as well. Really enjoying the new video quality, really bringing it up another level!

@VinceVenturella

2 жыл бұрын

Glad it was helpful!

Been airbrushing for a few years now, but this was a nice refresher course and I even learned a couple things. I never thought to combine the Vallejo thinner and flow improver into a custom mix like that, so I'm definitely going to try it.

@VinceVenturella

2 жыл бұрын

Glad it was helpful!

Beautiful, I appreciate you explained that the airbrush is a tool and not an ends mean to all painting tricks. I had no idea you could glazing with the airbrush too!

@VinceVenturella

2 жыл бұрын

Thank you, always happy to help. :)

Vince you are so much an inspiration for me. Best teacher ever!

@VinceVenturella

2 жыл бұрын

Thank you. :)

Absolutely loving the improved video quality Vince.

@VinceVenturella

2 жыл бұрын

Thank you. :)

This helped me a lot. Thank you so much for the video!

@VinceVenturella

11 ай бұрын

Glad it helped!

Vince is my favorite artist for miniature painting. Articulate explanations of various techniques

@VinceVenturella

Жыл бұрын

Thank you! Always happy to help. :)

This video is the best, most helpful video about airbrushing. I went from only priming and hating it and clogging constantly to actually enjoying using the airbrush and getting all of my base tones down on things. Thank you so much Vince!

@VinceVenturella

2 жыл бұрын

Glad it helped!

@Humatra

2 жыл бұрын

@@VinceVenturella well it was this paired with HC213 how to clean your airbrush fast!

Man whenever I wonder about something, you sure as hell have the answer! Thanks man!

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

@RandomDude-jq9mu

2 жыл бұрын

@@VinceVenturella if you could also shed some light on varnishing with an Airbrush, it would be most appreciated! Does thinning down the varnish make it less effective? Do I have to do multiple coats? Many thanks in advance!

Another great informative video, thanks

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

Thank you. Super useful in my preparation for painting a Griffin.

@VinceVenturella

2 жыл бұрын

Happy to help. :)

@adamjackson260

2 жыл бұрын

@@VinceVenturella all your painting tips and insights help. You are a community hero. I was so pleased to see your dragon on WarCom and had a feeling that was one of your secret projects you were working on.

Brand new to airbrushing. Thanks a lot for making these videos Vince.

@VinceVenturella

8 ай бұрын

My pleasure! Always happy to help.

Vince, you are the maestro! Thanks a lot

@VinceVenturella

2 жыл бұрын

My pleasure!

Thanks mate! As allways the Best content possible

@VinceVenturella

2 жыл бұрын

Thank you, always happy to help. :)

Bloody amazing.

@VinceVenturella

2 жыл бұрын

Thank you. :)

You’re the best, Vince! I really only paint 28mm dark age historical models with not much detail, so I haven’t incorporated the airbrush much past priming. The models just seem too small to get much benefit. I wish there were more videos about doing these types of figures; I know they’re not as popular, but it would help to see how pros approach smaller, more “boring” figures and how to make them look great in an efficient way. Thanks again for all you do!

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

Thanks as always Vincey V!!! Tabletop wargamer for 35 years and I use your content like my library for my hobby. Can't believe you don't have 100k subs yet, so deserve it.

@VinceVenturella

Жыл бұрын

Thank you!

Awesome video Mr. Vince, very informative and i liked it a lot.

@VinceVenturella

2 жыл бұрын

Awesome, thank you!

I just got my first airbrush delivered today. Great timing as I am nervous to use it haha. Insightful as always, thanks.

@VinceVenturella

2 жыл бұрын

Awesome, happy to help. :)

Amazing as always!

@VinceVenturella

2 жыл бұрын

Thank you. :)

Such a great video. Your a legend Vince. Thanks!

@VinceVenturella

2 жыл бұрын

Happy to help!

Vince, great video; however, I think this video in particular is one of your best. As somebody who is about to start using airbrush for the first time, I think this is the best video I've come across for a beginner. It approaches airbrush in a practical way, and covers all of the most effective ways to start using this new tool without going too deep into specific techniques. Bravo, sir! And thanks as always.

@VinceVenturella

2 жыл бұрын

Glad it was helpful!

Have never even thought about not going full blow before letting the paint flow in the airbrush. Eye opener 🙂

@VinceVenturella

2 жыл бұрын

Happy to help. :)

Even though i`m not a total noob in airbrushing anymore, the thing I struggled the most with was the correct thinning of my paints. I can`t thank you enough Mr. V. for the 80/20 Vallejo thinner/flow improver ratio suggestion. I mixed myself a small bottle and tested through this weekend - it`s been a game-changer for me! Even some of the chalkier and clunky colors I struggled with before (like palid wych flesh) now turned into smth workable. Thank you for the HC series, good sir! :)

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

amazing vid dude, thank you. I reckon I will get into airbrushing now

@VinceVenturella

2 жыл бұрын

Awesome, happy to help. :)

Great video Vince! some really good points for all levels. Personally from experience now I think more importantly than a good airbrush first is a good compressor. 3L tank, water trap, and many of these come with a basic airbrush. the initial compressor I had didn't have a tank, causing the air to start to become hot after a period of use, which lead to the air cooling in the hose, forming water droplets, and then spluttering with the paint. I had no idea what the problem was for a long time as it would start to happen about 40mins in. Drove me nuts. Ended up finding out the issue and got a new compressor, followed by a new Iwata.

@VinceVenturella

2 жыл бұрын

Yes, a compressor with a tank can be a god-send for sure.

thanx as i just airbrushed for the first time lastnight with a cheap airbrush i had major clogging issues till my trigger went down the drain ugh , good thing i got one more grav fed to use , thanks for this vid it helps alot

@VinceVenturella

2 жыл бұрын

Happy to help

This video was excellent - very thorough, clear, and matter-of-fact. I've been using an airbrush for well over 10 years, but I consider myself only... 'All Right™' with it. I definitely got a few answers to things that frustrate me - this was worth not only a like, but also a subscribe. :)

@VinceVenturella

Жыл бұрын

Glad it was helpful! Glad to have you along on the hobby journey and always happy to help. :)

Pretty awesome work, well done. I am already well versed in using the Airbrush, since I am doing scifi scale models, but am soon starting to paint some 3D printed figures, which is a totally different thing. Good to see that I can use the air brush and to what extend.

@VinceVenturella

2 жыл бұрын

Absolutely!

Great stuff friend 👏 👍

@VinceVenturella

2 жыл бұрын

Thank you. :)

Excellent video. One addition: bubbles in the cap can also occur with airbrushes with removable cups, if the cup is not screwed in airtight. It drove me nuts with my H&S.

@VinceVenturella

2 жыл бұрын

Good call!

Vince your content is great. It’s under served by your sound setup. Might be worth looking into or reaching out to fellow KZreadrs who have crispy perfect sound. Keep up the great work

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

big changes, the CAMERA!

@VinceVenturella

2 жыл бұрын

Just finally figuring it out. :)

I was given my first airbrush by a buddy who never did air brushing 3 years ago. I still have that brush and it’s my base coat and priming brush. It’s a $25 Now I have a badger renegade and it’s great for everything. I’m still learning how to get moving with it since I’ve mostly only airbrushed for covering a larger area, and priming inside when it’s cold out. Thanks for this video!! This will help a lot and keep me up and up

@VinceVenturella

2 жыл бұрын

Always happy to help.

Great video, thank you!

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

You know everytime I watch one of your videos it reminds me how crappy I am and how I really need to improve on my game your stuff is always amazing!

@VinceVenturella

2 жыл бұрын

We are all on our own journey. :)

Just want to Comment and say thank you. Took my first big jump into using my airbrush today And primed 10 models with. i Know it seems small but i've been Freighted to use ever since i got n September but thanks to this video and other you have on channel, i final took that step used it, so big thank you again with out video likes these i do not think i would of ever worked courage to try it

@VinceVenturella

2 жыл бұрын

Great to hear! No reason to be afraid and the only way to learn is to start. :)

Love the new camera! A new era for Vincey V content is upon us.

@VinceVenturella

2 жыл бұрын

Same camera, just better usage of it. :)

thanks for the info dude!!!

@VinceVenturella

Жыл бұрын

You bet!

The eclipse is great and my go to workhorse brush. It will get you 90% there with most models and has served me well for many years. I recently upgraded to the Iwata Micron but will continue to keep my eclipse on standby for priming, varnishing and all that good stuff. Invest in a well made airbrush and you will always find uses for it. Even if you eventually upgrade.

@VinceVenturella

2 жыл бұрын

Totally agree.

Well... damn. This was a nice rundown of how, what, why. Glad you made that Ninjon challenge video 😀

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

Can also recommend Harder and Steenbeck's Ultra 2 in 1 as a great starter airbrush if you live in Europe. It's very good for the price and interchangable with more expensive parts so you can upgrade it. I still use it even though I upgraded to an Evolution. Another little tip is that once you inevitably have to get a new needle, keep the old one (provided it's not bent or broken completely). You can use it to easily clear the nozzle.

@B4MBI72

2 жыл бұрын

I love my Silverline.

@VinceVenturella

2 жыл бұрын

Good tips. :)

@Elfhelm

2 жыл бұрын

Ultra is not bad (especially cleaning it, it's like 5 mins of work tops), but I didn't really like the trigger after using it for half a year, mainly regarding vertical, airflow control. You can try adjusting it, but I could never get it just right. Infinity, for over 3x the price, resolves that issue, but well, that's not exactly the solution.

@naphaneal

2 жыл бұрын

@@Elfhelm Silverline, Evolution, and Infinity share the same main body. So, if the Infinity is too expensive for one's taste, either Silverline or Evolution is a choice.

I picked up an Iwata NEO about a year ago. And while I have used it, I haven't used it as much as I'd like to... This has been largely because of me not having the experience and knowledge about thinning paints for the airbrush, what PSI to use and how to quickly clean the airbrush and change colors. You have helped me Immensly with all of the above Vince, so I would like to thank you for that

@VinceVenturella

2 жыл бұрын

Always happy to help.

Thanks Vince it was a great video, one way that I know cleans the airbrush like nobodies business and I think is well worth investing in is a ultra sonic cleaner. That and some simply green has fixed most of my problems.

@VinceVenturella

2 жыл бұрын

I have an ultra-sonic cleaner and it can certainly do the work, but honestly, since I started using my cleaning method in the linked video along with 99% isopropyl alcohol, I've never had the need to use the cleaner. :)

Thank you for the guide. I didn't know the alcohol could be used to clean an airbrush.

Two additional ways of altering the cone is by how close/far you are from you model and also how high your pressure is. The cone is much more narrow at 35 PSI compared to 25. EDIT: apologies for the spam, but love our interactions and feeding the algorithm ain't bad either ;)

@VinceVenturella

2 жыл бұрын

I don't mind at all. :)

You rule, Vince!

@VinceVenturella

2 жыл бұрын

Thank you. :)

Thank you for mentioning the ratio of paint to thinner, i had some abysmal results with my new airbrush and i could pinpoint it to overthinning my paint. Thanks!

@VinceVenturella

5 ай бұрын

Glad I could help!

When I started getting to using an Airbrush, I instantly scooped up a Iwata HP-CS but I had studied intensively before using it 1. I should state, people need to study on cleaning and keeping to the rule of working in 1-2 minutes before doing a quick clean, just like you would with a brush. I think that's a very big thing people aren't naturally used to when starting out unless if you're extremely paranoid and constantly on it, a good pre-cursor is to put an alarm so you get the muscle memory over time 2. Always remember, put in the airflow improver and thinner into the cup first, it helps to give a small coat of protection inside the airbrush before painting. It's also good to mix your paints in a separate cup first before pouring it into the airbrush so you can check consistency. Yes, you can mix it straight into your airbrush cup but you're at risk of paint drying inside the cup especially if you're not used to point no.1 as I've stated 3. Always test your paints on a surface or water color paper, this also means testing your PSI and seeing what works for your mix or specific paints. It will help prevent spider-webbing and allow you to troubleshoot and learn how your airbrush works 4. It can be a pain when it comes to practice, but it is necessary. It is always the same case with even brush work. It is understandable that you may not have a test model to work with but that's why having water color paper on hand 5. I kept to these rules personally and I've kept my airbrush's longevity really well due to following these rules. I've had the needle stuck and spider webbing before but they're easy to troubleshoot when you know why your airbrush is doing that. Remember, treat your airbrush really well and it will give you results the better upkeep you do with it

Great video. I still only use mine for priming

@VinceVenturella

2 жыл бұрын

Always time to take the next step brother. ;)

Keep up the great videos! I'll do my best to help feed the algorithm and to press buttons

@VinceVenturella

2 жыл бұрын

and I apprecaite that. :)

Ooo good tip at the end there with the isopropyl alcohol to deep clean. Why didn't I think of that.

@VinceVenturella

2 жыл бұрын

It works wonders.

I got an amazing deal on an eclipse bottle feed from hobby lobby I use for priming. Damaged box or something 20 dollars. Then I picked up a neo gravity fed for 30 bucks at Michaels. Keep an eye out deals and airbrushes can be pretty affordable.

@VinceVenturella

2 жыл бұрын

Awesome

Lol good timing Vince, my wife just got me an airbrush for my bday and I’m looking forward to using it on the drakes

@VinceVenturella

2 жыл бұрын

Awesome.

That is a nice looking Verminlord

@VinceVenturella

2 жыл бұрын

I think so. ;)

thanks for the video, and the explanation. could you by any chance make a step by step tutorial how to make those lightnings on the wings. they are awesome and I could apply them on more then wings. thanks keep up the good work.

@VinceVenturella

2 жыл бұрын

I'll see what I can do. :)

The lightening effect in the wings is incredible. I know you’ve done a lightening video or something like it before but would you maybe do something on how you achieved that effect in the wings?

@VinceVenturella

2 жыл бұрын

It's not too complicated, but effectively, paint the bolt a bright white, glaze a white around it witht he airbrush, glaze up against it with a blue tone, run a little white down the bolt, then use the airbrush and white to make some focus spots. I'll add it to the list for a future video.

@emilydowd-arrow3751

2 жыл бұрын

@@VinceVenturella your clear description sounds way simpler than it looks! I don’t own an airbrush, but I imagine the effect is still achievable…with more futzing 🤪-thank you for considering!

Between this and Squidmar's last 2 videos I get the feeling that is airbrush week! ^_^

@VinceVenturella

2 жыл бұрын

Secret: it's always airbrush week. ;)

Keep up the great work, Vince. You are a machine with the quality content.

@VinceVenturella

2 жыл бұрын

I appreciate that! :)

I ran out of airbrush thinner the other day and instead used Jo Sonja’s “medium magic mix” to thin down the paints. It seemed to work fantastically and not once did the nozzle clog, which I attribute to the retarder medium in the mix. I would recommend trying it out.

@VinceVenturella

2 жыл бұрын

Cool, I'll try it.

Came here straight from PMP cheers for the upload 👍

@VinceVenturella

2 жыл бұрын

Awesome. :)

To all soon to be Airbrushusers. As a learned carpainter and Wargamer I use Airguns-/-brushes daily. The amount of necessary cleaning is a fact to consider, if you u want enjoyable hobby-/-worktime and results. Great guide from VV ...

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

Damn that oil wash on the dragon, I bet it was a lot of fun to do :D It sure does look like it is :D Happy New Year Vince :)

@VinceVenturella

2 жыл бұрын

Absolutely, it's always a scary moment, but it was great for the final effect.

Much needed

@VinceVenturella

2 жыл бұрын

Happy to help.

I picked up the $80 cheapo set that Jon showed off recently. Used that for a few weeks and just picked up the Master compressor/airbrush set and the HP CS. The $80 cheapo one was enough to let me know I wanted to invest, but oh my goodness the HP CS and real compressor is so much better. Still getting the hang of pressure/thinning/distance/trigger control, but it's so good. I should have done this years ago....

@VinceVenturella

2 жыл бұрын

It's really a wonderful tool for sure. :)

So about 9 months ago I bought myself an Airbrush and Compressor. I may have not followed your advice an bought a top of the H&S Infinity CR plus 2 in 1 Airbrush kit and the Sparmax duel outlets Compressor. However being as I've done construction for decades and understand how to be very careful with fine tools, I'm not that overly worried about using them and breaking them. So far I've only done priming with them and found them to be such a helpful tool. But then again I been so busy as of late I've not done any brush painting since I got them. Maybe my work load will taper off some in the near future and I'll be to try out many of things that you covered in this video with my 'new' toy. As always thank you for all of your wonderful and helpful information.

@naphaneal

2 жыл бұрын

I have same model. If you're up to it, catch yourself a commission or buy a large miniature (e.g. car, airplane, etc.) This way you're getting your moneys value in comparable short time

@Winterydee

2 жыл бұрын

@@naphaneal - It's not like I don't have a backlog of models to build, base, prime and paint. I have over 2,000 points of Death Guard plus Mortarion in my pile of shame along with at least 1,500 points of Necrons plus The Silent King and Void Dragon. I've simply not had the time to paint due to work being so busy. The few times I've had a small window of time it has been stupidly hot where I live in Southern California. But with winter soon to be here... the good painting weather and temperatures hopefully come with it!

@VinceVenturella

2 жыл бұрын

Always happy to help and I say it's time to push yourself with that airbrush. :)

I just ordered my first Airbrush, compressor and well everything else as well :-) well worth it used my Christmas bonus to get it and still have some left so woop woop.

@VinceVenturella

2 жыл бұрын

Enjoy! You're going to have a great time.

@yagsipcc287

2 жыл бұрын

@@VinceVenturella Thanks bud :-) got a good quality but inexpensive airbrush and a really nice compressor that should do for good :-) as always thanks again and hope you had a nice Christmas.

Vince, Great video, your content has always been amazing and I'm glad to see your video quality catching up to that. Once suggestion is that I think the music was perhaps about 10-20% too loud. Thanks for the video!

@VinceVenturella

2 жыл бұрын

Always happy to help. :)

video quality is skyrocketing recently!! when vince conquers the audio quality too it's GAME OVER!!!!

@VinceVenturella

2 жыл бұрын

The last mountain. :)

This was a great introduction video. Love the way the dragon turned out. How often do you break out the airbrush on smaller miniatures?

@VinceVenturella

2 жыл бұрын

A fair amount still, sometimes just for priming and undercoating, or applying colors, or sometimes to smooth out blends. :)

15:20 That is why I only use Thinner for inks (while sometimes using some Flow Improver for regular acrylics). They won't cause glogs, so might as well have the benefit of drying faster with only Thinner as a.... thinner ;)

@VinceVenturella

2 жыл бұрын

Fair enough.

Excellent vid as always now I know why there is bubbles in my airbrush cup🥴👍👍

@VinceVenturella

2 жыл бұрын

There you go. :)

Woah camera upgrade? Looking much better!

@VinceVenturella

2 жыл бұрын

Same camera, just figuring out how to actually use it.

Hey Vince, This is awesome! Thank you so much for sharing your knowledge. Do you provide online classes?

@VinceVenturella

2 жыл бұрын

I do not, though who knows what the future holds. :)

Is much better audio quality this time thank you

@VinceVenturella

2 жыл бұрын

Working on it. :)

Vince, your airbrush material is some of your most valuable content. I watched many tutorial videos on airbrushes, none of them recommended filling the cup with thinner before paint despite who obvious it is. With your videos I was able to prime 10 minis with no clogs in half the time. It was enjoyable instead of frustrating. One question; I have the same Iwata Eclipse CS5 airbrush , I bought it before I discovered your channel. I noticed since I’ve practiced my trigger control is that I really have to push down on the trigger to get it to spray when mildly pulling it back. If I pull the trigger back a millimeter but don’t press down aggressively, nothing comes out. Is there something I should be looking out for to resolve this, or is this normal for this airbrush? Edit: Solved. I fully disassembled and cleaned it, and used beeswax to seal the threads. I think I had a small leak which was causing the small amount of air to not come out the nozzle. Thanks again, the airbrush is now exciting and inspiring me!

Merry Christmas! Great work as always super helpful. I just got my first airbrush so I'm excited to get to work on the skills. Quick question....where did you get the other extend wing on the dragon? Thanks

@VinceVenturella

2 жыл бұрын

It's an old set of wings, then customized, cut, bits added and green stuffed, not really replicable sadly.

19:25 I agree. I use 99% IPA for cleaning my airbrush all the time. It's like literary 10 times cheaper than Airbrush Cleaner. Word of warning. Don't let it soak too long, because it will effect the alloy down in the cup. Not sure if that will cause any issues long term, but definitely something I have noticed and others have experienced as well.

@parodycalfilms

2 жыл бұрын

I've heard a number of people suggest diluted ammonia-free windshield washer fluid and a little bit of IPA

@VinceVenturella

2 жыл бұрын

It's my go to and really does wonders.

Great video as always! Hearing the paint to thinner ratios that you use is helpful. I keep getting a speckled spray pattern out of my brush, and, after hearing what ratios you use, I think it might be because I don't think my paints enough. I usually go 2:1 paint to thinner instead of 1:1 like you suggest. I use Badger airbrushes, specifically the Patriot 105 and the SOTAR 2020.

@VinceVenturella

2 жыл бұрын

COuld be thinner (likely), could also be PSI too low.

@Izzyspaintingworkshop

2 жыл бұрын

@@VinceVenturella what's a good, average working PSI?

@VinceVenturella

2 жыл бұрын

@@Izzyspaintingworkshop I work at 18-20 PSI.

@naphaneal

2 жыл бұрын

@@Izzyspaintingworkshop It's also a factor of experience, as PSI depends on viscosity of the paint in usage. The thicker the paint, the higher the pressure needs to be.