First Method 1:10 Design 1:49 Printing Directly on EasySubli with Ecotank 4:50 Cricut cutting 5:26 Weeding 5:46 Subli Mask 6:13 Heat Press Second Method 8:02 Design Space 8:40 Printing Settings 9:40 Cricut on Sublimation 10:48 Cricut Shape on Easysubli 11:19 Sublimask 11:48 Heat Press 13:40 Comparison 13:50 Conclusion

@JustMightDIY

Жыл бұрын

Thanks for that!

@dorisstott4310

Жыл бұрын

@@JustMightDIY in the second method , how would you do letters that are cut individually, what would you put over them to be able to pull it off of the mat ? I’ve been looking on how to do this and y’all video is so easy to follow !!!

@SimplybeingR

Жыл бұрын

I would like to know this as well. I assume transfer tape is the way to do it

I have looked and looked on youtube for simple tutorials for this. My anxiety level was through the roof! Thank you both for doing a video for beginners. THANK YOU!!!!!!

@JustMightDIY

2 жыл бұрын

Yay! We’re so glad this is helpful for you. Happy sublimating!! 😁

@barbwheeler5805

Жыл бұрын

I know how you feel! I actually cried when my little shirt came out perfect!

besttt video i found after watching 40 thank youuuuu

@JustMightDIY

2 жыл бұрын

Yay! We love hearing that. Thank YOU for watching!

Great video! Loved the tip to cut a second time! Also, love that you showed both methods to use Easysubli!

@JustMightDIY

2 жыл бұрын

Thanks for leaving such a great comment and checking out our video!

I have also been searching for the right tutorial for my needs and y'all did it ! Great tutorial for a beginner like me . Thank you 😊

@JustMightDIY

Жыл бұрын

Oh yay! We love hearing that. Happy crafting!! 😄

Daaaaaamn, I just bought a cricut and I am a DIY /prepress person for 25 years. You guys pushin the limits. Understanding the opaque back to the transparent ink. 🤙

@JustMightDIY

Жыл бұрын

Thanks for watching and leaving a great comment! 🤙

Thank you! Finally a tutorial that is easy to follow! Like many of us, we have Epson printers and showing us how to use it both ways is a bonus! Thank You . . . Thank You . . . Thank You!

@JustMightDIY

2 жыл бұрын

Aw yay - we’re so glad this is helpful! Thanks YOU for watching. 😄

This was the best tutorial on easi sub that I have found plus you used cricut and epson - which I already have! As a graphic designer for a long time, I was most excited to see that you named the PSDs properly! With descriptive text and divided by dashes! no spaces! (ignored the other psds...LOL!) It is a pet peeve of mine. I really liked this method of having the whole video edited and you both just did the narration. It was a lot easier to follow and did not waste time while looking for something. Thanks so much!

@JustMightDIY

2 жыл бұрын

Oh thank you so much for the kind words!! 😄

Thank you, thank you, thank you! This was the absolute BEST video on using Easy Subli that i have found. I can't tell you how thankful i am for you and your easy to understand instructions! I have subscribed and hope do learn more from you two. God bless you!

@JustMightDIY

Жыл бұрын

Thank you! We always love to see comments like this!

For the second method I used sticker paper, more pressure and it was bomb. also my printer wouldn't feed on the easy subli. So you guys giving option 2 was a life saver thank you !!!!

@JustMightDIY

Жыл бұрын

That's fantastic, we'll have to try sticker paper. Thanks for sharing that!

I really enjoy the two of you.

@JustMightDIY

2 жыл бұрын

Thank you! That makes us so happy to hear! 😄

You guys were great! Thanks for helping us newbies out here!❤

@JustMightDIY

7 ай бұрын

You are so kind! Thanks for watching. Happy crafting! ❤️

Nice…thanks for making the tutorial so easy. Can’t wait to try this!

@JustMightDIY

2 жыл бұрын

Thank you for checking us out! Happy crafting

Thank you for this informative video. I was able to print directly on easysubli using my epson printer last night. It worked!👍😊

@JustMightDIY

2 жыл бұрын

Woo hoo! We’re glad to hear that. Happy crafting!

This is exactly what if been looking for! Thank you sooo much ❤️

@JustMightDIY

2 жыл бұрын

We're glad it came in so helpful! Thank you for checking us out

What I great video!! Thank you for showing both methods, really great info here! We did run into one issue using the EasySubli and the Epson printer. We were unable to get the sheet to feed into the printer correctly. After 7 attempts I decided to try to help the paper feed. This worked, both times I tried, but the sheet didn't feed straight and the ink streaked a bit. We ended up deciding that the EasySubli was more trouble than it was worth, but this video may change that. I really like the idea of sublimating onto the EasySubli sheet, this could minimize a number of the problems we ran into. Anyway, thanks again!!

@JustMightDIY

2 жыл бұрын

Thanks for watching! We’re so glad this video is helpful. Happy sublimating!!

Thank you for this! I bought some easy subli, but I had no clue how to use it! 😅 This definitely helps!

@JustMightDIY

2 жыл бұрын

We’re happy to hear that. Easy Subli really is easy once you get the hang of it!

You guys are AWESOME!! Thank you SO much for posting this, it's exactly what I needed!! And you're hilarious!

@JustMightDIY

Жыл бұрын

We're glad you could check us out! Thank you!

Great video! I was having problems printing with my Epson Et 2760 and EasySubli. I will definitely try both methods! Thanks

@JustMightDIY

2 жыл бұрын

We're glad you liked it! Thank you for watching!

Thanks for the easy to follow step by step video!

@JustMightDIY

Жыл бұрын

We're very glad it was so helpful! Happy crafting

I have an order for 100 polyprolene tote bags. They will not hold up under high heat. Using the first method was the only way I can accomplish this. I am so grateful to have found your tutorial. The first method worked fabulously. My eco tank 4800 printed the easy subli without pizza wheels, which was an added bonus. Thank you both.

@JustMightDIY

2 жыл бұрын

Awesome! We’re so glad to hear this worked for you! Thanks for watching and for letting us know. 😄

@lynnebizlyne436

Жыл бұрын

I have the same printer and got tons of pizza wheels. So weird.

Finally! I have watched so many and this one is so informative without making me feel dumb. Lol thank you!

@JustMightDIY

2 жыл бұрын

Thank you for checking us out. Glad we could help! Happy crafting!

@MimieRivas234

Жыл бұрын

Any suggestions when it prints grainy looking?

Thanks for this tutorial. I used the Copy Paper 120 gsm and more to match my sublimation paper, and it cut perfectly.

@JustMightDIY

2 жыл бұрын

Fantastic, we're glad we could help! Thanks for watching!

Excellent tutorial!! Thank you! 👏👌🏼👍🏼😍🤩

@JustMightDIY

2 жыл бұрын

Thank you!! We’re glad you like it!

Excellent tutorial. Thanks so much!!!

@JustMightDIY

Жыл бұрын

Glad you enjoyed, thank you for leaving nice comment and watching!

I'm new to your channel and agree with a lot of others, Thank You for this tutorial. I use Sublimation paper and have the Easy Subli but hesitant on using it until now. I will try it. I did Subscribe and will be watching your videos. Again, Thank You!

@JustMightDIY

2 жыл бұрын

Hey! Welcome to our channel - we’re so glad you’re here!! Good luck with the Easy Subli - it’s actually pretty easy once you get the hang of it! Happy sublimating. 😄

Great to the point video and excellent commentary. I was educated and entertained. Thanks!

@JustMightDIY

7 ай бұрын

Thank you! We're glad you enjoyed your experience

I use a light mat under the shirt and you can see the design on top of the easy subli perfectly and tape it down with tape.

@JustMightDIY

4 ай бұрын

That's brilliant! Thanks for sharing that tip. We'll be sure to put it to good use

Another great sublimation video! 🙂

@JustMightDIY

2 жыл бұрын

Thank you! Hope y’all are doing well!

This answered all my questions. Wish I had seen it before the other 3 videos I watched!

@JustMightDIY

2 жыл бұрын

We LOVE hearing that! Thank you so much for watching and for your comment. ❤️

I just love this video! You guy are too cute 😊 I learn even more, thank you.

@JustMightDIY

2 жыл бұрын

Thank so much for this sweet words! ❤️ We’re so glad this was helpful.

You guys are great! Thanks for the info.

@JustMightDIY

2 жыл бұрын

Thanks! We’re so glad you enjoyed it!

Love this tutorial!! ❤️

@JustMightDIY

2 жыл бұрын

Thanks so much! We appreciate the kind words. 😄

Thank you fantastic tute cant wait to sub on cotton and colors!

@JustMightDIY

Жыл бұрын

Thank you for watching! Happy crafting!

Thank God for you two humans very well explained for us begginers

@JustMightDIY

2 жыл бұрын

Thank you! We are SO glad this is helpful!! Happy sublimating. 😄

@kinkygizzychick

2 жыл бұрын

Could you please add the temperatures in the bio please

@JustMightDIY

2 жыл бұрын

Happy to - we just added them!

@RoseIse2018

2 жыл бұрын

So you don’t need to add registration marks for cut in the cricut?

@JustMightDIY

2 жыл бұрын

@@RoseIse2018 Hey! For Cricut Print then Cut, the registration box is automatically added when you get to the screen with the mats. Hope this helps!

What a great video tutorial! Funny too!

@JustMightDIY

2 жыл бұрын

Thank you! So glad you enjoyed it!! 😄

I absolutely love your tutorial. It’s helped me so much. The Easy subli mask doesn’t stick well for me. But I’m going to keep practicing. Thanks again

@JustMightDIY

10 ай бұрын

Thanks for watching! We’re glad this was helpful.

Great Video! Thanks for the help

@JustMightDIY

Жыл бұрын

Thank you for watching! We’re glad this was helpful!

Thank you I learned quite a bit 😊

@JustMightDIY

2 жыл бұрын

Yay! We love hearing that. ❤️

Great tutorial!!!!

@JustMightDIY

Жыл бұрын

Thank you!

Since the vibrancy in color did not matter and I have a sawgrass and an epson 8550...I have had so much trouble wasting with trying to line them up and cut with my cameo...I recently bought a cricut maker...will learn how to use ot tomorrow and try it so I can print it larger than my sawgrass 500 allows...I thank you for this helpful video!!

@JustMightDIY

Жыл бұрын

Hey there! We're so glad it's helpful. Happy crafting!

Great video thank you ❤

@JustMightDIY

Жыл бұрын

And thank you for watching and leaving a nice comment!

love watching yall videos, i need that press for sure, just can't find on, lol

@JustMightDIY

2 жыл бұрын

Thank you SO much! We're so glad you love watching. 😀 That heat press has been out of stock FOREVER unfortunately. Swing design has some that are pretty similar in price and function to the StarCraft heat press, and they come in fun colors like pink, coral and white. Here's a link to the pink one: shrsl.com/3kbh4

I thought I tried every print setting and settled on Premium Matte, standard res. Most of the time it was fine, but when there was lots of black in the image, it bled into other colors. Colors were vibrant though. Glossy photo/standard was ultimately the setting that solved the bleed problem, which is what you said in the vid, I think. So thank you.

@JustMightDIY

Жыл бұрын

This is why we test so much! Glad we could help make your results better. Thanks for watching

That looks great. If the white portion that you missed bothers you, you could probably use the Cricut Infusible ink markers to cover it up if you could match the color.

@JustMightDIY

2 жыл бұрын

Thanks! We do have the markers but if you re-press a sublimation, it could lift some of the original design. Thanks for watching!

@ufoquilter86

2 жыл бұрын

@@JustMightDIY oh that would be bad lol

@JustMightDIY

2 жыл бұрын

😉

@joeabell

2 жыл бұрын

@@JustMightDIY How about using the markers in the 'small area' then use a Circuit (or other) teenie tiny heat press 'iron" to that area. Less chance of lifting other original design areas. Might work. OR ... maybe PRE-adjust the print to A-Sub paper bleed to a fraction of a size larger if that impossible... to over cover the already pressed Easy Subli.

This guy sounds just like Gary Chapman, the 5 love languages man on Moody Radio. But thank you both for these helpful tips.

@JustMightDIY

2 жыл бұрын

Ha! What a coincidence. Our love language is sublimation. 😉

Great video! You guys actually do have the best step by step video explaining this process. I learned alot and now I’m ready. Thank you. Although, I just ordered my ecotank ET 15000 as well so I’m curious. Isn’t there a slow print setting to allow more time to dry while printing for the less likelihood of those pizza marks? Also anything i should know about the Ecotank 15000 before I start using it for sublimation?

@JustMightDIY

Жыл бұрын

Thank you! Doing this video we went through all of the settings we could find on both the printer side and computer to slow it down for drying before it got to the pizza wheels. We even left the lid open while printing. What we showed after dozens of tries and lots of wasted EasySubli is the best we could get. The problem is EasySubli does not absorb the ink like normal sub paper. This is why we put it under some heat after printing. As for the printer, kzread.info/dash/bejne/gZp228anYbu2kaQ.html It's been great for a year+. This was our set up of it, nothing done off camera. Make sure and have in use once a week to keep ink from congealing. Hope this answered everything and happy crafting!

*_Awesome Video Guys_* thank for sharing with us !!!!!!!!Appreciate the #freegame instantly Subbed 🗣💯🔥

@JustMightDIY

2 жыл бұрын

Thank you so much! We’re glad you like it. 😄

Thank you for the video it helped us so much. I do have a question when we went to iron it on the color faded did we do something wrong?

@JustMightDIY

Жыл бұрын

Did you use a classic iron, as per ironing shirts? If so, this don't reach the right temperatures. Would suggest purchasing a heat press kzread.info/dash/bejne/oqJ4udVrg5fLnto.html As an example

Great video, easy step by step, so thank you for this. Question how many washes will this method hold the image for? Once again thank you so much for this easy step by step tutorial.

@JustMightDIY

6 ай бұрын

Hey! Thanks for watching. How long it lasts depends on so many factors like the wash settings and such, so it’s hard to say.

Great tutorial! Quick question though, when using method #2 and cutting the EasySubli on your Cricut, should the rough side be up or down?

@JustMightDIY

2 жыл бұрын

Hey! That’s a great question. Cut it rough side up. Hope this helps!

THANK YOU!!

@JustMightDIY

2 жыл бұрын

Thank YOU!

Thank you for this tutorial. I have a ET 2720 and the easy subli won't feed through, but I see it went through your ET. Any tips for it to feed, or will I have to just do method 2?

@JustMightDIY

2 жыл бұрын

Hey! Thanks for watching. We honestly prefer method 2 - less chance of something going wrong with the print. Hope this helps!

I love your videos. You are so fun and always have great information. So helpful. Also, I love your printer cabinet- where di you buy it from?

@JustMightDIY

Жыл бұрын

Hey there! SO glad you like it!! We didn't buy the printer cabinet- we made it using a bottom cabinet from Lowes! Here’s the video that shows how we made it: How to Make a Faux Card Catalog Cabinet | Sublimation Printer Cabinet kzread.info/dash/bejne/c3x9w8OCgtHYo7A.html

@kaycedilla2072

Жыл бұрын

@@JustMightDIY Thank you so much!

I would think that to avoid border misalignment... maybe you could ofset the cut shape a tiny bit smaller. Great video!

@JustMightDIY

Жыл бұрын

Thanks for that, next we need to use this process we will try that! Thanks for watching!

@SimplybeingR

Жыл бұрын

Or possibly make an offset for the easy subli so the cut image fits into it...just thinking of ways to do this as I am in the midst of using this and having trouble...wasting time and materials

I love this video! I am having trouble with the easy subli sticking to the mask using the first method in this video. I've wasted so many sheets trying to get it to work. Any suggestions?

@JustMightDIY

2 жыл бұрын

We're trying to understand the nature of your question. If it's not sticking enough, make sure the ink is dry and burnish the masking well. If it's sticking too much then make sure you're using right time, temp and pressure. Hope this helps!

THANK YOU!!!!

@JustMightDIY

2 жыл бұрын

We’re happy it’s helpful! Thanks for watching. 😄

I noticed you pressed it for 45 sec in the first method. When I bought it from US cutter they sent instructions for you to only press it for 15 secs. Unfortunately It fell off the shirt by the time my daughter and I got to the supermarket. Thank you!

@JustMightDIY

2 жыл бұрын

Thanks for watching, hopefully the longer press will keep the design longer. We haven't had any problems with ours yet!

Thank it was fun

@JustMightDIY

8 ай бұрын

So glad you liked it!

Brilliant

@JustMightDIY

2 жыл бұрын

Thank you!

Is the Siser Easy Subli similar to vinyl? I'm looking to sublimate on darker cotton t-shirts without the feel of vinyl. Thank you for the great video!

@JustMightDIY

2 жыл бұрын

Hey! It does feel like a very thin vinyl. Hope this helps!

I truly enjoy your tutorials. I tried the easy Subli as well and went through 10 sheets testing and cleaned my printer 3 times during the process and the ‘pizza wheels’ still showed up so I’m not a fan of the easy Subli. It’s too expensive to use to have the images ‘marred’ every time. I heard if you own a Sawgrass printer it works better but that’s too expensive of a ‘fix’ for the issue as a small crafter right now. I did not try the second method you demonstrated as I ran out of the Easy Subli but I wish I had seen this first. 👍❤️

@JustMightDIY

Жыл бұрын

Hey there! Yeah A the pizza wheels are frustrating when you try to print directly. You can purchase it by the sheet if you want to try a bit more with the second method. Links on where to purchase are in the description!

hey great video just one question I may have missed it but on the direct onto the easy subli don't mirror correct only mirror the image on the second one for the print and mirror the vinyl correct

@JustMightDIY

11 ай бұрын

Yes, direct is don't mirror! Thanks for watching!

When you use the print and cut for the cricut do you have to know the exact height and width or will it scan it and cut once it's loaded

@JustMightDIY

2 жыл бұрын

Hey there! Not sure we understand your question here. First, let us know which EasySubli method we demonstrated you’re talking about and then see if you can clarify the question a bit. Hope we can help!

Do you put the rough side or shiny side of easy sub down on the cricut mat? Thank you

@JustMightDIY

Жыл бұрын

Thanks for checking us out. To us a minute to go back and find the answer. Which is rough side up. Good luck and happy crafting!

Wow thanks for uploading. Method 2 when you pressed Easysubli on fabric which side it’s face up ? Ruff or smooth side ? Thanks

@JustMightDIY

2 жыл бұрын

Hey! Thanks for your question. Rough side up! 😄

@freshMila

2 жыл бұрын

Wooo thank you for your reply… you guys the best

@JustMightDIY

2 жыл бұрын

Thank YOU for watching. We’re glad it’s helpful!

I have an Epson F170, would I just need to buy the Easy Subli Mask? Does the mask come with 2 parts? I'm a little confused on the seemingly 3 parts but only showing one box.

@JustMightDIY

2 жыл бұрын

Hey! You’d need the EasySubli to actually sublimate on. The mask is basically a transfer tape. Hope this helps!

hi, quick question. Your heat press is covered with teflon right? why do you do that and how has it affected your prints?

@JustMightDIY

Жыл бұрын

Hello! Yes - that’s Teflon. We do that to protect the press in case we forget to cover something effectively. It doesn’t affect any of our prints or presses. Hope this helps!

Im about to get the espon ecotank 8550 hope i will be able to print sublimation onto the easysubli

@JustMightDIY

Жыл бұрын

Let us know how it turns out!

On the second method the rough side of the east subli goes facing up or down when you go to cut it?

@JustMightDIY

Жыл бұрын

Hey! Rough side up. Hope this helps!

yesterday for me 23/12/23, I used my easy subli for the first time. I was told NOT to mirror the easy subli, so I print out and cut the offset, then set out to cut the sublimated image, Portrait, but when I cut the offset. it was also in portrait, BUT the sublimation image printed horizontal :( so it did not line up on the easy subli, (wasted sheet of easy subli) 🥲🥲my question is. If you do not mirror the easy subli, but mirror the sublimation image, how can this line up?? I am still a sublimation newbie here. thank you.

@JustMightDIY

7 ай бұрын

Hey! Your sublimation image will need to be placed face down on top of your easysubli in order to be transferred, so the sublimation image needs to be mirrored. Hope this helps!

ok on second step what side is up and what side is down rough up smooth down? also i did setting as stated my subli melts

@JustMightDIY

Жыл бұрын

Took a minute to find the answer, rough side up! If the subli is melting we would double check the press your using is heating up accurately. Excess heat is about the only reason for that result. Hope this helps!

Great video! Do you have to use the mask?

@JustMightDIY

2 жыл бұрын

Thanks! We’re glad you like to! We prefer to use the mask when there are small edges that can curl under. Learned from experience with that one!

@wegetthingsdone5867

2 жыл бұрын

@@JustMightDIY ahhh that makes sense! I ordered some sheets to pick up from Joann’s tomorrow. 🤓

Can you cut an image larger than what the cricut will allow? wasn't for sure if there was a work around for that. I have an Explore Air 2? Thank you

@JustMightDIY

2 жыл бұрын

Hey! Thanks for your question. If you want it to be larger than what the Cricut will allow, you will need to do method #2. For that, you will have to print from a different program and just cut the outline on the Cricut. Hope this helps.

Everything looks good, but i can't print siser sheet. My epson 2850 don't work. But the 2nd method works well ;)

@JustMightDIY

10 ай бұрын

We're glad the second method worked for you!

Honest personal opinion?! What is better EasySubly or EasyColor Siser for making T-shirts... I have both Epson sublimation printer (I have to use 2 step for it) and regular inkjet Epson printer... Because you have experience, what is better results from this two paper?

@JustMightDIY

Жыл бұрын

Hey there. Better is so subjective that it’s hard to say. EasyColor is easier to do overall, though.

How does it hold after washes? Are the colors still as vibrant?

@JustMightDIY

2 жыл бұрын

Hello! Yes - the colors still look good after a few washes!

I just started sublimation and i'm finding kids shirts colored and high poly count are hard to find. I took the sublimation plunge because I really hated weeding HTV and I was never really confident that it would stick forever. So my question is...since this is an htv....are you able to pick at the edges and see the edge ( like in his glitter htv shirt)

@JustMightDIY

Жыл бұрын

It is an extremely thin htv. There's obviously going to be an edge to pick at but it is so thin and adheres strongly. You would be super hard pressed to have it come up in the edges if it's pressed correctly. One of our future videos is DTF applied to cotton or color shirts. Other options to consider kzread.info/dash/bejne/Y6ShyqWbd6-3gag.html kzread.info/dash/bejne/ZWef2tyjnb3Wepc.html

Hi, where did you get you lovely little printer cabinet? That is so adorable.

@JustMightDIY

2 жыл бұрын

Hey there! We didn't buy the printer cabinet- we made it using a bottom cabinet from Lowes! Here’s the video that shows the build: How to Make a Faux Card Catalog Cabinet | Sublimation Printer Cabinet kzread.info/dash/bejne/c3x9w8OCgtHYo7A.html

@Bellascreations

2 жыл бұрын

@@JustMightDIY Wow! Thanks!

When using the easysubli how would yall make a larger design than what design space allows you ? Like 11” wide design or bigger

@JustMightDIY

Жыл бұрын

They make large type EasySubli. Like 20 inches by 50 yards. And have a wide format printer capable of handling it. Piecing it together would have seams and not look quality.

Hello. Would you know the settings if using a Silhoutte Cameo? Thank you

@JustMightDIY

2 жыл бұрын

Hey there! Unfortunately, we don’t have a Cameo, so we wouldn’t be able to share the correct settings. We’d recommend starting with an HTV setting if it has one, testing a small shape and adjusting from there. Happy crafting!

What setting g do you put your cricut on to cut the easisubli?

@JustMightDIY

Жыл бұрын

Hey - we show all of our settings in the video. Everyday Iron-On with More Pressure is what we used.

What setting to I print on subli with my epson if using word instead of design space? Also, can you do step two on the white shirt?

@JustMightDIY

Жыл бұрын

We haven't worked out of word. Don't know that setting but somewhere in the medium level of print quality. Either process should work on most fabrics and colors. How this helps! Thanks for watching!

@tashanet6497

Жыл бұрын

@@JustMightDIY thank you. I'll practice on some old shirts lol

Why did you use 2 layers on the blue? I made a black shirt the other day and just used the easy sub and it was fine. Just curious.

@JustMightDIY

Жыл бұрын

Hey! We’re not using two layers - it’s just a different method of using EasySubli (if printing directly onto it doesn’t work with your printer). Hope this helps!

Hello. Sublimation paper from TexPrint DT Light (XP) will work well with EasySubli? Thanks!

@JustMightDIY

Жыл бұрын

Hey! We haven’t tried that specific paper with EasySubli, but we have used it before on other projects. It should work well for this based on our other experience!

Have you tried using the ET2800 or like for printing on the Siser EasySubli? If so, do you have a KZread video?

@JustMightDIY

9 ай бұрын

Hey! We did try it in one of our smaller EcoTanks with similar results. We didn’t do a separate video on that since it was so similar.

I think the reason you are having to let it dry so long is the premium matte setting. it puts on so much ink with that setting and i haven't noticed any difference than with bright white paper setting.

@JustMightDIY

2 жыл бұрын

Hey! Thanks so much for your comment. We actually tried every print option and quality setting combination and came up with very similar results with the lack of ink drying. 😉

My logo keeps coming out fuzzy with bleeding out of my epson printer. I have cleaned it and am using sublimation ink? Any ideas

@JustMightDIY

2 ай бұрын

Hey! Not sure on the bleeding, but the fuzziness could be image quality. Are you sure that you’re working with a high-quality image?

So wait, on the second shirt, when you did easysubli with the sublimation. Did you do print then cut or just cut option with the easysubli paper, And you just put the paper on cutting mat and put it in the cricut?

@JustMightDIY

Жыл бұрын

Hey! Thanks for your question. We just cut the shape out of the EasySubli using the Cricut. It was not a Print Then Cut Hope this helps!!

@tashanet6497

Жыл бұрын

@@JustMightDIY Got it, thanks.

I have et 2720 and the easysubli won't feed in. Very frustrating because sometimes it will. Any suggestions?

@JustMightDIY

Жыл бұрын

Hey! If you’re having trouble with thr printer feeding, we’d recommend trying the second option instead. Hope this helps!

Can you use this method on 65/35 blends or does it just work on 100% cotton?

@JustMightDIY

Жыл бұрын

Hi there and thanks for your question! You can use EasySubli on that as well. 😊

Hi! Do you have the link for your specific heat transfer tape?

@JustMightDIY

2 жыл бұрын

Hey! All of the materials we used are linked in the description. 😄

Is there any product that doesn't feel like vinyl when putting on cotton or dark fabric?

@JustMightDIY

9 ай бұрын

Hey! Not that we’ve tried yet. They all sit on top of the fabric to some degree.

Can you please put all the paper names that you used to print the image and to transfer the image into transfer paper what brand did you use I’m sorry

@JustMightDIY

2 жыл бұрын

Hello! Thanks for watching. All supplies used are listed in the description, including links! Hope this helps. 😉

Hi i love your video. Does your ecotank have sublimation ink in it? Im afraid to use the easysubli to print on with my ET 2803 filled with sublimation ink... TIA

@JustMightDIY

Жыл бұрын

Hello! Yes - this EcoTank has sublimation ink it. You will need to use sublimation ink with EasySubli. 😉

@igarcia1660

Жыл бұрын

@@JustMightDIY thank you so much! Any tips on how to load into printer? Do i change paper settings?

@JustMightDIY

Жыл бұрын

Hey! We go through all of our tips and settings for both methods in detail in the video. 😉

Did you mirror the easysubli on the 2nd method?

@JustMightDIY

2 жыл бұрын

Hey! For method #2, only mirror your image printout (for the sublimation paper) - not the shape on the EasySubli.

i have individual letters , im wanting to put on a black sweat shirt , 100% polyester , what will i need to do . i printed it off on a sub paper, did i miss a step yall showed , i look at so many videos . please help !!!!!!

@JustMightDIY

Жыл бұрын

Hi! Go back and watch method 2. You need to cut the EasySubli to the right shape and adhere it to the shirt before sublimating.

How does the tshirt feel after this process? Is it soft around the design?

@JustMightDIY

2 жыл бұрын

Hey! It feels like a very thin vinyl on the shirt.

We are following the video but we have a different printer and when we try to use the easy subli it keeps saying paper jam 😩 do you know what we could be doing wrong?

@JustMightDIY

9 ай бұрын

Hey! That’s not something we can troubleshoot. However, we would recommend you try the second method instead. 😉

i have a random question i might have missed it but i was wondering how do you set the paper size in the printer ? do you set it as 8.5 x 11 or the the bigger size because i know there size is kind of odd lol thank you

@JustMightDIY

2 жыл бұрын

Hey! Thanks for watching. 😄 We just left the paper size at 8.5x11 and didn’t have any issues.

@DJV0ICE

2 жыл бұрын

@@JustMightDIY thank you , love all your videos by the way so helpful and super funny and positive keep up the great work thanks again

@JustMightDIY

2 жыл бұрын

@@DJV0ICE Thank you!