There is no motor temperature sensor.

@VRMinde

4 жыл бұрын

Mārtiņš Kaktīts might be my bad, but I see two temperatures on battery and one for “scooter”. Do you know where is it located? Thanks!

@KaktitsMartins

4 жыл бұрын

@@VRMinde The "scooter body temperature" is for the ESC/ controller. More specifically for the mosfets. i.imgur.com/6cwuLiq.jpg

@VRMinde

4 жыл бұрын

Mārtiņš Kaktīts thank you, good to know!

@ezgetap677

4 жыл бұрын

@@VRMinde which applications are you using?

@VRMinde

4 жыл бұрын

EZGETAP I use the M365 Plus app on iphone mainly

Love your videos! Really nicely edited, informative. I have just been given two scooters that weren’t working, got them working perfectly, done some nice little mods and starting to enjoy getting out on them with my daughter. Thanks for your videos.

@VRMinde

2 жыл бұрын

That is very kind of you 😄 thanks mate, ride safe, enjoy the summer and have fun!

Great videos! One big fan more, greetings from germany! Keep up this outstanding work! Much love ❤️

@VRMinde

2 жыл бұрын

Cheers man :) Danke!

Very informative video, thanks! 👍

@VRMinde

4 жыл бұрын

Sarajevo hey, thanks mate!

@V_channel_

4 жыл бұрын

@@VRMinde No. Thank *you* 👍 Liked and subscribed. Even did the bell thingy 😂✌

Anyone that can hold a camera, input calculations on his phone all while riding a scooter, deserves a subscribe, lol

@VRMinde

3 жыл бұрын

Hahah thanks bro, glad you liked the video :)

@gurditsingh6628

2 жыл бұрын

0¹

great video man!

@VRMinde

4 жыл бұрын

x x thanks bro, glad you liked it :)

If you only have such roads, then you are lucky, because we have nothing to do with such a small ground clearance. Good work👍🏻👍🏻👍🏻

@VRMinde

3 жыл бұрын

That is a really good point. This summer I was in some other countries and I appreciated 10" tires much more, was also missing suspension and I would definitely not ride with this much clearance :D Anyways it was just a fun experiment. Thanks man!

@Shieldonpadla

3 жыл бұрын

Is the clearance about 2inches? Was it enough to take the risk?

@VRMinde

3 жыл бұрын

@@Shieldonpadla it was enough for any flat road and not enough for driving up/down any curb, and I mean any - even the smallest curb will catch in the middle

Very interesting video! Thank for the awesome idea! Did you connect each battery to the power cable or just one?

@VRMinde

3 жыл бұрын

For testing purpose I have only connected one, I think connecting both would make sense

Hey mate, shouldnt' you Y charger cable? So that you don't get any dangerous voltage difference between both batteries. I am looking for this exact mod as i just bought a new battery, but seems like i can fix the old one with a new BMS. Have you tested charging and balancing abilities with this setup? Thanks man, awesome video :)

@VRMinde

4 жыл бұрын

You can do the Y charger or charge them separately, or get the Rita device for around 60eur and then you don’t care about the difference in voltages (if you have seen my latest video I just got it myself, even plugging in 50.4V 12s battery). This setup I have charged the batteries separately to the same voltage so I did not check on the balancing :)

really nice video ty

@VRMinde

3 жыл бұрын

Thanks for the kind word! :)

Are you planning on making any more ebike videos in the future ? Love your channel keep up the good work 👍🏽

@VRMinde

4 жыл бұрын

Ian Taplin hi mate! I am! But I am in an interesting situation... I have ordered a new bms that did not arive, this Monday received a refund after 90days of waiting... ordered a new one. I could not find anything in Europe, so paid extra for air freight from China again... I will then be able to assemble my ebike again and make video :) I shall also recive the 48v upgrade for the m365 :) let’s see how fast can it go. I would also appreciate if you have any specific ideas what videos would you like to see? Thanks

@iantaplin903

4 жыл бұрын

VRMinde I really enjoy all of the bike related videos you’ve made , your bmx videos have even made me get back on my bmx again and I’m loving it , I think that general videos of skatepark riding sessions and ebike riding videos ( when you get your ebike fixed ) will be great , the quality of your videos and editing is amazing aswel 👍🏽

@VRMinde

4 жыл бұрын

You see I spend all of my time in the skatepark now on inline skates, so I do not take bike that often there :) But I am waiting for the new BMS... I think there is a package coming today... We will see :D BTW, youtube sent your comment to spam... for whatever is their stupid reason.

Cool mod and great video 🍀👌

@VRMinde

3 жыл бұрын

Thanks mate for taking the time to leave a comment!

you are crazy man.thanks a lot.i upgrade my xiaomi ,thanks to your video

@VRMinde

4 жыл бұрын

EZGETAP thank you mate for the kind words! Happy you find my videos helpful :)

@ezgetap677

4 жыл бұрын

@@VRMinde i have idea to cut side walls and to move them to the edge of the scooter bottom and to welld them there.it will be enough space for too 18650 side by side.so the clearance of the button will be like on original

@VRMinde

4 жыл бұрын

EZGETAP I miss my old house with a decent workshop and the welding machine :) but I have never welded alu. If you have a way of welding the frame, it could tottaly work. Can you send me some pics/video when you do it please? :)

@ezgetap677

4 жыл бұрын

@@VRMinde of course.now i testing 2 battery combo side by side on neck frame,and i will change steering wheel whit wider one

how can i extend my depth of housing i have kugoo m4 ? how do i get mold of the plastic piece ?

@VRMinde

3 жыл бұрын

Either design and 3d-print it or probably it is possible to make it with epoxy resin and fiberglass cloth. It is quite some work though :)

no helmet! OH MEIN GUTEN SCHPIELLE :O btw im just curious are you left handed, usually southpaw/goofy stance?

@VRMinde

3 жыл бұрын

I am actually not :) But I do my tricks so I land on left foot, don’t even know why :)

Nice vid I also made a second battery using spim08hp cells from battery hookup.

@VRMinde

4 жыл бұрын

Jelte Swinnen aren’t those li-po? I know nothing about the lipo batteries :)

Hi, what kind of drone are you using? Love your video by the way.

@VRMinde

4 жыл бұрын

pepsodenttube haha, thanks mate! I am using insta360 one r cam, not a drone ;)

@GrandMasterPeep

4 жыл бұрын

VRMinde okay I see how it works it’s super duper wide

@VRMinde

4 жыл бұрын

PansyAmerican it is filming 360 degrees and stitches the selfie stick out. In post production you can choose which angle do you want to show from very wide to narrow and point any direction

@VRMinde please where can i get the double battery cover?

@VRMinde

Жыл бұрын

Oh mate it is such a hassle to print and ship them, and the shipping to europe will cost at least 15 eur… and there is nothing to earn..

how did u make the clip. i mean u were filming without toucing ant camera. just like camera was flying with u... please give me an explaination.that was awesome.if possible please make a video of it....👍👍👍

@VRMinde

4 жыл бұрын

Rony Khan hi mate, just look up 360 cameras. I am using the Insta360 OneR camera. It is filming 360 degrees and automatically cuts out the selfie stick :) it has many different effects. Technology has moved forwards a lot. Gopro now has some serious competition to fight :)

Nice video! The thermocouple that checked the battery temps will only be checking the 'first' battery I assume?

@VRMinde

4 жыл бұрын

Thanks mate, there are 2 of them installed and two temperatures displayed. One is between the first and the second cell, and one somewhere in the middle of the pack.

@cmh-re

2 жыл бұрын

Yes, only the battery connected to the ESC. The other one will still be protected but won't report any data

Does anyone know how to make the RITA device? its difficult for users in Africa to get the devices off europe.

@VRMinde

3 жыл бұрын

I bet that someone deep interested in electronics could make them...

How can I get a frame and screws for mine . I'd love to upgrade my 365

@VRMinde

Жыл бұрын

I ordered screws from Amazon, frame needs 3d-printing. There are drawings on thingiverse

When you connect the second battery do you need to connect any other cable besides the one with the xt30? There are 2 more extra cable that's the battery...

@VRMinde

4 жыл бұрын

:) Someone most probably will correct me: There is one going to the main board/controller, you only need it connected from your main battery. Now the other one is the charging port. You could do another Y-joint there and just use the original charging port to charge both of your batteries at the same time. If you will not do the Y split, as far as I understand, both batteries will still charge, but the second battery will not be attempted to be "balanced" with the BMS. A good solution would be to install the second charge port and charge both batteries at the same time with 2 separate original chargers. And “good” = fast :) Oh, and there is one more cable - at the back for the light. Only connect it from one battery.

is it possible to do this with 48v models and add a 12v series battery? logically to reach 60v???

@VRMinde

Жыл бұрын

In theory it is possible to add a pack in series, but such a method has many flaws, difficulties and dangers. Will be hard to make sure they discharge at the same speed, difficult to charge, etc etc etc

you live in a amazing place ❤️

@VRMinde

3 жыл бұрын

I agree! The only problem is the rain from October till like March that is every day, together with strong wind and temperatures of 1-5C :)

@FlavioBozzoli

3 жыл бұрын

@@VRMinde I live in north Italy..it's very similar.

Hi what type of screw did you use for deck with the spessor?

@VRMinde

2 жыл бұрын

Sorry mate, I can’t remember the length now…

I like your idea very much and I wonder how did you print extra deck for other battery. Could you please send measurements (model) for 3d printing?

@aldisgarais

4 жыл бұрын

Measurements of extra cover for 3d printing

@VRMinde

4 жыл бұрын

Aldis Garais hi mate, I basically took one of the models on thingiverse and increased the Z value to 42.4mm height in cura :)

@aldisgarais

4 жыл бұрын

Ok thingiverse has many models but wich one did you choose?

@VRMinde

4 жыл бұрын

Aldis Garais yeah that is a problem. I will try and look it up when I am back at my pc mate. I am a bit traveling at the moment. I think it was uploaded by some spanish guy and there were a few spanish comments 🙄 I know it is not very accurate 😂

@aldisgarais

4 жыл бұрын

Okay, good luck in travelling 😀, Yes pls find the model if you can

Are you familiar at all with the dyu d1? Or Jetson bolt? Same scoot different bames

@VRMinde

4 жыл бұрын

PansyAmerican no, I have not looked at any m365 clones...

What about charging, can you plug in standard charger and just wait 5 hours and everything will be balanced?

@VRMinde

Жыл бұрын

Yes, just need to wait longer if you go with one

Hi, sorry for asking, but am I right that If I want to do this I just connect the xt60 connectors parallel and connect just one bms? What about charging? Do I just connect the charger like normally and they will both charge even with one bms disconnected? Thanks!

@VRMinde

10 ай бұрын

you have to have separate BMS for separate packs. BMS will watch for over/under current not only in the whole pack but also in individual cell groups. Depending what type of BMS you use your pack may or may not charge through the power output port, by the way, I think it is xt30 in xiaomi. But you can easily make a small parallel connection to a charging port and then just use one charger as always

@anythingdotstl5585

10 ай бұрын

@@VRMinde so If I was to connect two xiaomi batteries in parallel I just won't connect one bms?

@VRMinde

10 ай бұрын

yes, you just make sure they are charged to the same level before you connect :) the original bms "will not know" there is another pack connected in parallel@@anythingdotstl5585

Do you have any plans for the black M365 where you got the battery from? Maybe you could do another video where you put a custom higher capacity battery instead of the parallel method here.

@VRMinde

4 жыл бұрын

Julius Dalay I kind of now have the white one with 12s battery and the Rita device, I assume you have already seen this video kzread.info/dash/bejne/hZdl2aivaZvJebQ.html. I do not know what I will do with the black one.

@juliusdalay

4 жыл бұрын

@@VRMinde Hmm if I may suggest, maybe try buying a used/new M365 Pro battery on the black one and install Pro Dashboard and see how it stacks compared to a stock M365 Pro? :)

Geras video :D

@VRMinde

4 жыл бұрын

Aciu, stengiausi :)

I recommend hiboy s2R. You can change the battery one battery is 18miles range but buying another one you can get it up to 36miles or 40miles.

@VRMinde

3 жыл бұрын

Thanks for the rec man!

hello can someone send me a link to the compatible vices I can't find thank you very much

@VRMinde

Жыл бұрын

There was a thingiverse link in the description mate

I don’t have access to a 3D printer, do you know where you can buy the battery tub extension piece?

@VRMinde

3 жыл бұрын

Hi man, sorry but I have not seen them for sale, unfortunately. Try searching for 3d printing services around you - maybe you will get lucky...

@blakeforrest9600

3 жыл бұрын

@@VRMinde good idea! thanks mate

Nice Video!Compatible with 1s ?

@VRMinde

3 жыл бұрын

Thans man! You can connect same voltage battery in parallel on any scooter :) including the 1s

@eugenyanitskiy

3 жыл бұрын

@@VRMinde is the lid size the same?

@VRMinde

3 жыл бұрын

@@eugenyanitskiy that I do not know mate, I do not have 1s at hand to compare. It should be, I doubt xiaomi made new frames 🙄

I have to xiaomi batteries i want to use. The problem is the connector is xt30 and xt60. And the xiaoni batteries is xt30. How can i solve the problem?

@VRMinde

Жыл бұрын

re-solder connector or buy xt30->xt60 connector

I háve two baterry 36v IF put on one esc no demage ? Esc onli 250w

@VRMinde

Жыл бұрын

no problem if you connect them in parallel

Where did you connect the bms cable of the extra battery?

@VRMinde

Жыл бұрын

every battery has a separate bms, you do not need to connect it to anywhere. If you have 2 packs charged to the same level and connected in parallel - the battery "Does not know" that it's capacity has increased 2x nor does it have to :)

@camos.mufc.show.2176

Жыл бұрын

Ya don't have too once you connect batteries they both are controlling the battery packs so as long as they are both reading the exact reading of voltage then cross wires parallel and also too the same port to charge

Where did you buy a battery extender case?

@VRMinde

2 жыл бұрын

I have 3d printed it

I have 1 old Xiaomi battery and i want to use it but the old battery as no safety bms can i connect to the news batterys bms and i wont damage the bms or it will damege plus the new one as a bigger capacity

@VRMinde

Жыл бұрын

You need a separate BMS for a separate pack, you can’t use the same

@ANONYMOUS.scooter

Жыл бұрын

@@VRMinde thx

What did you change your battery to in the settings

@VRMinde

3 жыл бұрын

If you connect a battery in parallel you don’t need to change anything in the settings

So i remember getting about 12 mile range with stock tires and doing about 11-12 mph, with a double battery is it possible that is double the range? If not why not?

@VRMinde

3 жыл бұрын

You will most likely "almost" double it because of the increase in weight and air resistance when riding :)

@gigi9467

3 жыл бұрын

@@VRMinde interesting, do u sell this as a kit by any chance? I think that this combined with front and rear suspension would be pretty cool

@VRMinde

3 жыл бұрын

@@gigi9467 No I am not selling now amything :) maybe I should consider one day, but then I need to quit my full time job. With both suspensions it would be like the stock height of the m365 I think. At the same time “wildman” bag above the front foot works pretty well also. And you can fit decent size battery there. It does not take the deck space and you can still fold the scooter. The effect on the centre of gravity is negligeble 🙄

so if to charge, i charge like normal? your scooter was stock? and if its possible on mi 1s scooter?

@VRMinde

2 жыл бұрын

Yes, yes and yes :) you will need to update firmware to “remove charging mode” and also make parallel (“y”) connection on the charging port

@ruax6993

2 жыл бұрын

@@VRMinde would m365 battery work with 1s battery?

@VRMinde

2 жыл бұрын

@@ruax6993 yes and m365 battery will make your 1s go faster

@ruax6993

2 жыл бұрын

@@VRMinde thanks

hello where can i find de screws ? wat is the size please ? thank you.

@VRMinde

3 жыл бұрын

Man... The ones for closing the battery civer? I really can’t remember now 🙄 I have ordered the screws online, I think 🙄 Try and search for replacement bolts for the m365. They most likely are m2, and the lenght should be according to how tall is the printed part. If mine was 47mm. Then the bolts must have been something like 50 or 55 long 🙄

@alimcl2824

3 жыл бұрын

@@VRMinde oh thank you man 💪🏽

I dont have the 3d printer is it possible to buy the bottom exteder online or can i buy it from you?

@VRMinde

2 жыл бұрын

I am not selling them mate

@timmythetooth2587

2 жыл бұрын

Ebay sell them 49 pound

What camera are you using please?

@VRMinde

2 жыл бұрын

I use several cameras for filming mate, not even sure any more what specifically was used for this video. I use nikon d6 with different lenses, insta360 oneR, gopro hero 7 black and insta360 go 2.

Hi. What's the length of screws you used for the 42.5cm?

@VRMinde

3 жыл бұрын

I wish I would remember man 🙄 I remember I have found online the length of the original screws and added the height of the 3dprinted part. But I can’t remember the number now mate, sorry

@Shieldonpadla

3 жыл бұрын

@@VRMinde ok no worries. I just like your set up so I'll copy yours. I just need to get the length of the screws for the battery inside and screws for the battery cover

@VRMinde

3 жыл бұрын

@@Shieldonpadla i could not find the needed length/diameter bolts for the double battery. As I only used it for testing I just used the gorilla tape :D But I could find bolts for the cover.

@Shieldonpadla

3 жыл бұрын

@@VRMinde I guess that's 50mm length of the screw you use

@VRMinde

3 жыл бұрын

@@Shieldonpadla it can be mate

I wish I had somewhere like that to ride, in London we have to be on the lookout for Thieves constantly ☹️.

@VRMinde

3 жыл бұрын

Big city life.. I prefer living in a village :)

@coaldust01

3 жыл бұрын

@@VRMinde I would love that, nice and quite easy life 😁, I'm fitting a 350w AliExpress motor to my Xiaomi 1s today, Hopefully it works and I get faster top speed, I will let you know, great channel btw,👍

@VRMinde

3 жыл бұрын

@@coaldust01 Thanks mate, let me know please. I think you will get more benefit from juicier battery though, but that is why would be cool if you return with info :)

@coaldust01

3 жыл бұрын

@@VRMinde it's has less torque than 250w, but at 31 amps with quadratic throttle still has respectable acceleration, top speed has greatly improved, freewheels at 23mph on full battery, was getting 19mph at under 60% 250w would be down to 15mph by that point, way way better, I just have to wear a helmet now 😂,

@VRMinde

3 жыл бұрын

@@coaldust01 very nice, thanks for the update mate. Ride safe! :)

It's like a lowered car so its main problem is bump too?

@VRMinde

3 жыл бұрын

Haha, yeah, it is like a VW Golf with “sport shocks” 😂

Do we still need a bms for the second battery?

@VRMinde

4 жыл бұрын

Creative Stuff I would say yes, unless you are using balancing charger and are sure you won’t drain the battery too much 🙄 it just can be any bms, not necessarily m365 one

@lesstalk4556

4 жыл бұрын

@@VRMinde That's awesome. Thanks man. Truly appreciated.

Ile mm ma dystanser ?

Where i can buy these battery extender frames? i can find the blueprint for printers but one one sells these things. I dont want to buy a 400€printer for this 10€ part xD

@VRMinde

3 жыл бұрын

I have not seen them for sale. Look around for 3d printing service maybe 🙄

@Bergwacht

3 жыл бұрын

@@VRMinde I feared that^^

@viralmagicmusic4280

3 жыл бұрын

@@Bergwacht I can print it for you. I have 4x 3d printers and i was seller on Amazon and Ebay.

3D print design for the casing, where can i download

@VRMinde

4 жыл бұрын

Hi mate, I used this design www.thingiverse.com/thing:3912426 and just increased the Z height for my battery to fit. I think it was 42.5mm

@evansyomu2879

4 жыл бұрын

@@VRMinde www.aliexpress.com/item/4001117904828.html?spm=a2g0o.cart.0.0.32963c0081FRiV&mp=1 will the dimensions of the battery fit, or do i need to extend the compartment?

@VRMinde

4 жыл бұрын

@@evansyomu2879 From what I see it should fit in the place of the original battery and you should not need to extend the compartment. Unless you want to have them both.

Ile cm ma dystanser ?

Do you just connect the two batteries in parallel?

@VRMinde

2 жыл бұрын

Yes, if both are 10s packs AND CHARGED TO THE SAME VOLTAGE :)

can i drive with no bms ??? and does the after market controller have a app?

@VRMinde

2 жыл бұрын

You can, but why would you do that? There are a lot of different controllers to choce mate

@barakcobrama1703

2 жыл бұрын

@@VRMinde i have a 38-48v 600w controller but i am using standard battery from xiami m365 and the bms burnt and its expensive 49 pounds do you think its a danger ?? i also have monorim 500w motor.

@VRMinde

2 жыл бұрын

@@barakcobrama1703 well, If you are willing to monitor and controll battery charge and discharge levels manually + constantly check cells for disbalance - you can run without a BMS. I find it too risky and too big of a burden to constantly look at the voltages etc 🤷🏻‍♂️ Did not even know that prices went up so much. I would at least install some BMS, not necesserally the standard m365 one

Do you have idea why scooter m365 reduceing speed, slowing down and then accelerate again.this patern is constant when rideing full trothel.maby to change capacitor from 63v to 100v on motor controler.?.or the number of revolution is limited by software.

@VRMinde

4 жыл бұрын

EZGETAP if you run 10s batteries you should not be worried about the capacitor, I think. But I am not 100% sure. Are you on 1.38 firmware?

@ezgetap677

4 жыл бұрын

@@VRMinde yes but its not problem whit firmware.it happened before whit other on flat surface.it can be or software that limit rpm(but why it slow down) or short of busting power in capacitor.m365 pro use 100v 1000uf capacitor and here are 63v 1000uf.do you have same experience on flat surface because a put same parameters like you?

@VRMinde

4 жыл бұрын

EZGETAP no mate, I never had this issue. It is smooth all the time 🙄

@sparklauerei1

4 жыл бұрын

@@ezgetap677 i have the same problem. accelerates to 32kmg then brakes to 31 and accelerates again. over and over. under 70% this doesnt happen.

@ezgetap677

4 жыл бұрын

@@sparklauerei1 same whit me.it can be cople of things.we need answers from some tehnical or electrician

Is it dangerous if we charge the scooter through the charging port when we connect second battery in parallel? Or need to charge it separately?

@VRMinde

3 жыл бұрын

To be 100% safe I would make a Y (parallel) connection on the charging wires after the charge port as well. Then just charge both batteries at the same time through their charging wires, but with the same one charger. That would allow the separate BMSs of every battery to stop charging if the set voltage has been reached. It would also lower the charging current for every battery in half. I think that would be a safe way, but hey, do it at your own risk :)

@claudiotimotius858

3 жыл бұрын

@@VRMinde Hi thanks for the reply, appreciate it :) . anyway, i did an upgrade on my xiaomi after watching your video. test it for about 2 weeks and works perfectly fine. i'm completely happy for the range i can reach with this mod. But i didn't put the second battery on the deck. i made a custom bag for it so i can remove the battery anytime i want. And for charging, i'm always charge it separately ( disconnect and take out the second battery from the bag ). So i wonder if i can charge it directly from the scooter charging port without disconnect the second battery LOL (never try this before, so i need to ask) :D anyway, love your video so far! Keep it up man, many thanks for all your videos ^^

@VRMinde

3 жыл бұрын

@@claudiotimotius858 Thanks for the kind feedback mate. I understand what are you asking, and I assume it is "kind of safe" to do that. Your "normal battery" is charged via charging wires and through the BMS. But as its' voltage is going up - the second battery will also be charging as it is connected to the positive and negative terminals of the first one. The problem that I can see is that the BMS of the second battery cannot stop that charging if something goes wrong, because the charging is not going through it. Let's say you have a bad cell - during the normal charge BMS can stop the charging in case of overcharge, short-circuit etc. , but in this case, it won't. That is the risk. I would either continue charging them separately and checking the voltage every time before I "join" them, but to be honest soldering a simple parallel connection on the charging port wires is 9999x easier :)

@claudiotimotius858

3 жыл бұрын

@@VRMinde Noted. Will Try to make Y parallel connection for next project. For now i will keep it in traditional way. Charge it separately :D thank you so much for the feedback! ^^

Would running 2 m365 batteries in parallel cause damage to bcm or cells since they are independent?

@VRMinde

3 жыл бұрын

Dulla Han if you charge them to the same level before connecting together - it wouldn’t. You scooter’s battery already has 10s2p: 10 cells in series and 2 in parallel. I just recommend to use the second battery pack with it’s own BMS.

@dullahan590

3 жыл бұрын

@@VRMinde i tried running the m365 battery on a 36v ebike controller and bcm cuts off once at full throttle. Do you think it would cause any problem if i solder xt60 directly on the battery terminals before it enters the bcm and charge it through the regular balance port after the battery needs a charge?

@VRMinde

3 жыл бұрын

Dulla Han Are you talking about BMS (battery managenent system) or something else that you call bcm? Most probably m365’s bms is cutting off after not receiving some communication from the controller. But I am just guessing. I do not know that for sure. If you just bypass the BMS you will be able to use the pack of course. But you have to make sure you won’t over-discharge it as there is nothing stopping you to do so. And you do not want to overdischarge the li-ion cells :)

@dullahan590

3 жыл бұрын

@@VRMinde yes the bms(sorry im so used to calling it bcm), the unit that sits at the very tip of the battery. Im certain there a fail safe on the bcm that prevents over draw thats why it shuts down when at full throttle then power back up when released. Im thinking of running 2 m365 batteries in parallel but bypassing both bcm using a 500w ebike controller.

@VRMinde

3 жыл бұрын

Dulla Han ok, I never heard it called bcm - allways BMS :) but what’s important that we understand each other :D You can do that of course... but you do understand that you should not draw more from the cell than it is specified to “give away”? And that without the BMS nothing will be controlling the individual cell voltage. And if thepack goes unbalanced and a cell goes below 3.0v you might even have a short circuit in the cell? And it can burn your house/garage or something else :) If you are ok taking those risks go for it :)

You could have cut off the lower case from the other scooter and flipped it over then mounted it.above or below.im considering it.

@VRMinde

3 жыл бұрын

3d printed part was easier to get than another spare scooter :)

For 10inch wheel you have to patch to 315 to get accurate speed .

@VRMinde

3 жыл бұрын

les1669 I did it on purpose man :)

@les1669

3 жыл бұрын

@@VRMinde I have it at 7.1 was just wondering not familiar with the Settings if I have the right settings. Thanks.

@VRMinde

3 жыл бұрын

les1669 Sorry man I do not understand what is 7.1? For 8.5 wheels it should be 345, for the 10” - 315.

@les1669

3 жыл бұрын

@@VRMinde the value in the firmware for 10inch tire %.

Mano projektėlis eina į pabaigą. Susidūriau su klausimais kurių pats neišmanau. Kokį plastiką naudoti baterijos space’riui ir kokius spausdinimo parametrus rinktis (sluoksnio storis ir infill)? Būčiau dėkingas už patarimą :-)

@VRMinde

2 жыл бұрын

Naudok paprasta PLA. Koki auksti/linijos stori ir tt rinktis priklauso nuo to kokia nori galutine isvaizda/kokybe gaminio matyti ir kiek laiko spausdinti :) galima deti net koki 0.8 purkstuka ir spausdinti 0.4-0.6 sluoksnio auksti sumazinus greiti… pasibandyk koki maza gaminuka su skirtingais nustatymais ir nuspresi

@arturasr

2 жыл бұрын

@@VRMinde ačiū! :-)

hello sir can i use a 36v m365 clone battery?

@VRMinde

3 жыл бұрын

I think any 10s battery should work 🙄 hopefully it has a bms? :)

@pinoymods5406

3 жыл бұрын

@@VRMinde structure:10s3p nominal voltage 36v nominal capacity 8ah

Gerai susižiūrėjo video. Bet vistiek nuvažiuotas atstumas nuvylė. Tikėjausi daugiau.

@VRMinde

4 жыл бұрын

Darius su visom elektrinem priemonem taip :)) labai daug lemia greitis. Vaziuociau 25, jauciu ir 40km iveikciau. Bet tada geriau jau su dviraciu, atsisedus :D

Talking about the curiosity for range, I'm more curious about the tires.

@VRMinde

4 жыл бұрын

Breeze li these tires work, and they are quite cheap from the Aliexpress :) there is a vid on my channel on how did I fit them and it must have the link in the description (I hope 🙄). Thanks for the comment!

@saifulannuar5506

4 жыл бұрын

Ur battery cell unbalanced... 30k power custom firmware.. Is not for long range ride...

@VRMinde

4 жыл бұрын

saiful annuar my battery cell is perfectly balanced. Ask how I know :) I was siting with a bulb and a voltmeter for entire evening to make sure it is as balanced as it gets, just before mounting it :) And agree regarding the 30k and long range!

Hi co-scoot new friend here 🤗

@VRMinde

4 жыл бұрын

Hello and welcome! :)

On display battery is plinking red after flash is it right???

@VRMinde

5 ай бұрын

Does it work? Should not be flashing as far as I remember

@ronaldrenke3262

5 ай бұрын

@@VRMinde it rides but display dosent show speed and battery shows 1 red dot plinking. After i have done the flash.

with the hack i get 31km but not for long range maybie 17km or way less depends on hills i recken it will go faster if he changes settings a bit.

@VRMinde

2 жыл бұрын

For more speed you will need battery pack with more voltage mate :)

Link for the screws please

@VRMinde

2 жыл бұрын

No chance mate, was too long ago can’t remember where did I get them from 🤷🏻‍♂️

Is it Billund? I saw similar roads there

@dtsubera

4 жыл бұрын

I watched some more and there is a sign and legoland. Obviously

@VRMinde

4 жыл бұрын

Yes mate! You are right :) it is Billund

It will not charge to each other?

@VRMinde

Жыл бұрын

You need to connect either battery mains or charge port together and it will. The best way is to make another “y connection” on the charge port.

Nice video. this Was insightful. Oh, and Happy dare day! Xd

@VRMinde

4 жыл бұрын

Song thanks mate! Dare day? I dared many things at a skatepark this morning :)

compatible with pro 2 ?

@VRMinde

3 жыл бұрын

I think the deck size is different, would need to redraw

So with another battery u must run 29km x 2 ?

@VRMinde

3 жыл бұрын

As I replied you mate on another comment, riding 30km/h I only make 15km range on my m365 with my 90kg of weight

How much did this cost?

@VRMinde

4 жыл бұрын

It did not cost a lot for me... as I had the second battery and a 3d printer. Maybe 5 eur for the fillament and 5Eur for the connectors... I think battery would be another 110Eur or so

I would probably do a AWD with two controllers and to hubs.

@VRMinde

3 жыл бұрын

I would probably also :) If you know where to get inserts to mount the m365 wheel at the rear please let me know. I am trying to find them for 4 months now and literally everyone is out of stock...

looks dangerous to me to have plastic cover underneath. They used aluminium with certain shape for resistance. In case of accident, imagine a car driving over the scooter, it should maintain shape and protect battery, otherwise it would explode and can make the car take fire. There are safety aspects that need to be accounted for.

@VRMinde

3 жыл бұрын

We have a saying: “if you’re affraid of a wolf - do not go to the forest” :) Majority of ebike battery packs are plastic cases that would 100% not survive a car going over it 🙄 But you do have a point here, you can damage the pack even hitting a curb or a deep pothole.

Can i put m365 battery on xiaomi essential for increase range??

@VRMinde

2 жыл бұрын

Sure, direct swap, I did it already :)

@VRMinde

2 жыл бұрын

Oh, and the max speed will also go up if you use custom fw

@MahiEurope

2 жыл бұрын

@@VRMinde I'm so confused,,after install will it run without firmware??

@VRMinde

2 жыл бұрын

@@MahiEurope firmware is in your controller not in your battery pack.

@MahiEurope

2 жыл бұрын

@@VRMinde so i have to just install the battery only,,,right?? Then it will run?

Are there any companies out there producing these extra floor space for extra batteries? I prefer this idea than about a repack at the front

@VRMinde

3 жыл бұрын

I am not aware of such. However, I am planning to redesign it a bit and receiving larger print-volume printer next week. Now I amlready experimenting with tougher, more temperature resistant materials. No promises, but I might be able to put some for sale, at least in Europe

@maxoneson9616

3 жыл бұрын

@@VRMinde ok that's good keep me posted thanks

@imMotions

3 жыл бұрын

Hey have you decided to sell the base at all anywhere!?

@VRMinde

3 жыл бұрын

@@imMotions hi mate, I have not done that yet. Do you need one for m365? How tall?

@imMotions

3 жыл бұрын

@@VRMinde well my mate gave me the battery out of he's m365 as he's motor was broken so I wanted to do this to mine for more range but had a look online for the 3d printed base and can't find any like this is so was wondering if you was selling them and how much they would be

I subed for the patience and good work got my Xiaomi 365 and too bad im not capable of handwork 😔 i Wish were nieghbors

@VRMinde

4 жыл бұрын

Mitch Calangi thanks for subscribing and thus supporting my channel! At least the technology let’s us communicate despite how far in the world you are :)

@mitchcalangi5430

4 жыл бұрын

@@VRMinde youre right this kind of technology makes us unite wherever we are and It definitely binds people in the most useful way in our daily living regardless of the situation that we are facing today with this annoying pandemic somehow people remain connected sharing knowledge and bright ideas... Im from Italy though 🥰

@VRMinde

4 жыл бұрын

Mitch Calangi great country mate! We have visited Italy so many times, both summer and winter and there is still so much more to see!

@mitchcalangi5430

4 жыл бұрын

@@VRMinde im glad you like Italy in my 26 years of existence there are still enchanting places that i must put foot unto... your Place Is Amazing too DENMARK is BEAUTIFUL same as the people definitely be visiting again as soon as possibile

@gringolife9986

4 жыл бұрын

You Can find poeple on Facebook. I did liké that l instal 2 battery . One 7800 from Xiaomi m365 and second one from m365 pro 12400 With 3 battery l Can Do dépend riad 40 to 80 km range With eco mode 24 km and normal mode is up to 30 km speed

now imagine a fully charged xiomi m365 pro 2 with dual 41 volt batteries 12800mah x2

@VRMinde

3 жыл бұрын

My “simple” m365 with Rita and 12ah extra battery has more range than I ever intend to ride on an electric scooter :) For longer distances I prefer ebike over escooter ;)

How did you charge the battery? Did you do something with the battery

@VRMinde

2 жыл бұрын

Charge both up to the same voltage before connecting in parallel, that’s it

@sammyg7539

2 жыл бұрын

@@VRMinde yes i understand but did you needed to do something with the kabels

@sammyg7539

2 жыл бұрын

How did you charge them afterwards.

@VRMinde

2 жыл бұрын

@@sammyg7539 you can make “Y connection” and just plug the batteries into it so you keep the cables of batteries as they are

@VRMinde

2 жыл бұрын

@@sammyg7539 make a y connection on the charging port and just charge through the original port. Takes 2x longer like that :))

whats the scooter app called

@VRMinde

2 жыл бұрын

I can’t remember. Maybe m365 tools 🙄

@elias6156

2 жыл бұрын

@@VRMinde Dont you have the app

@VRMinde

2 жыл бұрын

@@elias6156 it is a 2 year old vid mate, I don’t have the same apps on my phone :)

@elias6156

2 жыл бұрын

@@VRMinde Oh ok

What speed in mph??

@VRMinde

3 жыл бұрын

33km/h is 20.5mph. It is faster to google it mate :)

@smoxesk

3 жыл бұрын

@@VRMinde will do and thanks

Can m365 non pro go up to 35km/h?

@VRMinde

3 жыл бұрын

In theory yes :) in practice you will need like 13s-14s battery pack for that. 12s can be enough if you weight like 50kg

@gkeks1913

3 жыл бұрын

@@VRMinde But it's only have 250watts unlike m365 pro that has 300w. Is 250w is enough to handle 35kph? Because I badly want to have 35kph for road ride lol

@VRMinde

3 жыл бұрын

@@gkeks1913 it can reach these speeds, but you would of course benefit from more powerful motor, especially if you want to maintain those speeds for longer periods of time. If I needed to go for a longer distance + speed 30km/h + I would consider ebike instead :) much safer, more comfortable, faster, easier to carry stuff etc.

that weird that you could reach only 29km with two 7Ah batteries. I reach 30/32 km with a DIY 10 cells 3Ah battery pack that i added in parallel. You'r shoulde be better than a xiaomi m365 PRO, where my friends reach easily 40km. I think a lot changes on driving conditions, firmware and cells quality. PS i city ride with a top speed of 26km/h and 8.5" tires, but almost all my friends use 10"

@VRMinde

4 жыл бұрын

I think all of these comparisons are not fair, as you say, depending on road, wind, tires, etc. I get like extra 1km/h copmpared to the stock as the battery voltage is still the same... With Rita and 50.4V external battery I get extra 4-5km/h

@gabriele476

4 жыл бұрын

​@@VRMinde i was talking about range not speed. Your has an efficiency of like 19 Wh/km where usually that number should be around 10-12 Wh/km, thats just too high for me, maybe a little tweaking with the firmware currents (using the beta version) could improve that. Rita is another story, more like an ninebot ES2 battery management system, i don't have that but seems good from your videos.

@VRMinde

4 жыл бұрын

Gabriele Russo I agree, probably I would reach more. But I was pushing the motor power limits on the max speed all the time+motor power constant pretty low... and it is (always) windy here in Denmark...

@gabriele476

4 жыл бұрын

@@VRMinde oh yeah, i was talking without wind didn't count that factor, thats a big issue on those up standing riding position scooters.

Only 30 km?? It Would be nice with 100km.distance...

@VRMinde

4 жыл бұрын

Michael BMW would you drive for 3.5h standing on the scooter though?

@getsmartereveryday2023

3 жыл бұрын

I think from 25 km with one battery its not ok 29 km with 2

@getsmartereveryday2023

3 жыл бұрын

I make 25 km with one battery and ai have anither xiaomi m 365 and i want to know if its a good deal to make in one m 365 with 2 battery

@VRMinde

3 жыл бұрын

@@getsmartereveryday2023 I make only around 15km with one battery on full speed. There is no magic here, battery is like fuel tank - double the size, double the range

@getsmartereveryday2023

3 жыл бұрын

@@VRMinde rewind ... i have 1 battery and 60 kg and range ia 25km tested ănd if i put another same battery i mean to go with 2 the same time it will be 40 maybe 50 km ?

nice but i see a big problem right off the bat my friend... u lost more then half of the clearness to the ground.. that can be a big problem on bumps or uneven road.. :/

@VRMinde

4 жыл бұрын

bill gangsta yeah mate I know, and now I am riding in a place where I would destroy the scooter with a pack like that. It was just a fun experiment :) I will soon (hopefully still this week) upload a first impressions vid of me riding with an external 10Ah 12s battery bag in my native town Klaipeda, Lithuania.

@billgangsta539

4 жыл бұрын

@@VRMinde yeah good experiment for sure. the battery bag my be a bit more practical i think.. half the fun is tinkering around lol :D i got the pro version about a week ago i like it so far :)

@VRMinde

4 жыл бұрын

bill gangsta I think they are great scooters :) and you are right about the tinkering :)

I tried using this on my xiaomi essential, when I flashed the file my scooter showed a red charging status, even tho it was at 100% and whenever I used it the speedometer stopped working, any insight on this?

@VRMinde

2 жыл бұрын

1. Are you sure you connected the batteries in parallel? 2. Are both batteries charged to the same level? 3. Did you set in the custom firmware “remove charging mode”? These should help :)

@skratz062

2 жыл бұрын

@@VRMinde Sorry forgot to add that I haven’t modded the scooter, it is completely stock. It’s very weird though and it got me nervous when the scooter started acting weird, I flashed it with another file that I’ve used before, i wanted to try something new since I could modify each setting, but I guess it isn’t compatible with the essential. Thanks for your time, means a lot.

@VRMinde

2 жыл бұрын

@@skratz062 you can use xiaoflasher app for android, paid version (1-5eur I think) will allow to flash the essential 🙄

@skratz062

2 жыл бұрын

@@VRMinde I just use down g it’s easy and free but I can’t exactly chose every option which kinda sucks and it drains my battery much quicker but what can I do

@skratz062

2 жыл бұрын

@@VRMinde I got the essential for 188€ because it was on sale in my country so I couldn’t let the offer slide it was too good

That's a way to do it but for me it doesn't look practical riding with that little ground clearance. There are some 18650 cells that offer 3500mAh of capacity which is still 35% more range over the standard 2600mAh cells without even changing the construction of the scooter. You can check out Vortecks on youtube, he has made a beast M365 with custom cells and BMS.

@VRMinde

4 жыл бұрын

Anonymous yeah, 100% agree. Larger cells would be the least appearance-changing way. But my office is like 2km away from home, so stock battery works well... For longer trips I go with ebike. But it was a fun experiment :)

@Anonymous-qx5uk

4 жыл бұрын

@@VRMinde definitely. Keep up the good work, your videos show a lot of quality and dedication.

@VRMinde

4 жыл бұрын

Anonymous thank you! I do spend some hours doing them, but I enjoy the process a lot. Thanks again!

hey man. time to switch to EUC. faster speeds and good battery capacity out of the box

@jarisipilainen3875

4 жыл бұрын

max speed limit is 25kps for these.they cant go faster. legally xD think 15yo scooter gang go 50kps

@VRMinde

4 жыл бұрын

I do not know man. It looks like something I would kill myself with :) ebike is something I go for longer distances/bigger speeds. At least I have great suspension, brakes and two grippy wheels :)

@dtsubera

4 жыл бұрын

VRMinde everyone says the same until the first try. On EUC you’ll feel a true freedom of movement. You should try it

only 29 km? I got 22km on max throttle with just a single battery.

@VRMinde

4 жыл бұрын

marmoto liferider how much do you weight? :)

@leebellion5508

4 жыл бұрын

I get 17 miles on my one battery travelling at 20 mph so this only adds a couple of miles 🤷‍♂️

@VRMinde

4 жыл бұрын

Lee Bellion well, I do not get anything close to that. How much do you weight? :)

@gringolife9986

4 жыл бұрын

That's a bullshit l only can get between 10 to 15 km when l ride lm weight 70 kg If u ride only in straight you can ride longer but when you go climb you never can get that 20 km it's a bullshit

@VRMinde

4 жыл бұрын

Gringo Life I do not think there is a need to argue a lot. I put two batteries that are the same. If I would have put one only - the range would have been halfed 🙄 Next week I should receive my 10ah 48V battery :) Let’s see if I burn my scooter and what will be the max speed + the range ;)

Sounds like splatoon music lmao

@VRMinde

Жыл бұрын

:D

wait wy so poor in range? mine is getting 28km whit the standard battery that has 6000km, 10" wheels and custom firmware (up to 35km/h). something is wrong in your scooter, I think

@VRMinde

2 жыл бұрын

How much do you weight?

@VRMinde

2 жыл бұрын

I have 15scooters with similar battery sizes and they are all wrong then as their range is very much similar 😅

@cmh-re

2 жыл бұрын

@@VRMinde 75Kg so not so light. I have to say that where I live is really flat. This is what i get whit my custom firmware. Other firmwares I tryed where awfull both in range and in responsiveness

@VRMinde

2 жыл бұрын

@@cmh-re well mate, we will have to stay with our opinions :) I am a bit heavier, about 88-90kg, but I need 48v battery to reach 35km/h on gps and as you can see double size batteries to reach your range at those speeds.

@cmh-re

2 жыл бұрын

@@VRMinde what tire pressure are you running? I'm at 2.5bar

6min 46 clash royal village ? 😂😂😂

@VRMinde

2 жыл бұрын

Yup, I live in the virtual world :)

Im the only one who sow that invisible stick on his hand??

@VRMinde

4 жыл бұрын

Lukáš Jordan you have magic powers - can see invisible things :D

Looks kinda like g30 xd

@VRMinde

Жыл бұрын

Might be the same line of though 😂

what is there about the clearance? ahahaha

@VRMinde

2 жыл бұрын

Not much 🤷🏻‍♂️

it is dangerous to hit rocks

@VRMinde

3 жыл бұрын

Taysi Kuu depends how big :)

@taysikuu1748

3 жыл бұрын

@@VRMinde my pro base hits everywhere.