thank you for this video, I'm about to do a cam chain tensioner shoe replacement and i hated the idea of clipping my pushrods - I'm not very experienced with motorcycle work, so these videos really help supplementing my service manual.

7:07 I think he meant to say, "Too Much Oil in my Air Filter", not "Too Much Air in my Oil Filter".

Thank you SOOO much for posting these videos. You're a huge help to the community.

@How2Wrench

8 жыл бұрын

+FattyMcJason Thank you and please share!

Shane's video's are the VERY BEST on youtube. I can watch them for hours.

@How2Wrench

6 жыл бұрын

Thank you 7316bobe! Share as you wish. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench

Thanks for very useful guidance and instruction. I have a 2010 fat bob and want to change the rocker boxes - the alu is giving me a hard time every winter shop to keep it lookin' good. Now I decided to change to chromed HardDrive boxes - your video was just what I need to make sure I can do the change correctly. Thanks again,.

Just came across your videos. Fantastic information. Clear, simple, informative and concise. Great job. Time to binge watch.

@How2Wrench

4 жыл бұрын

Thank you for taking the time to comment! Hit that subscribe button please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Great video I have to do a top end gasket kit and was kinda nervous but after watching your videos I know I will be able to get it done! Thanks for sharing your knowledge!!!!!

Shane, your videos are fantastic! I have a 2005 Heritage Softail and discovered it had developed a leak somewhere in the front cylinder. Your videos were a huge help to me as I tore into the motor, replaced the faulty gasket, and got everything back together. Bike seems to run great. Thanks again for these great videos!

@How2Wrench

7 жыл бұрын

Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! www.how2wrench.com/contact/ Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW

@How2Wrench

7 жыл бұрын

Thank you! Stay tuned!

thank you for all your series your teaching guys like me who ride there bike hard and stunt how to fix my bike the right way and shareing your knowlege to the next generation thank you

@How2Wrench

Жыл бұрын

Thanks Jay! Do you have a favorite video or lesson? Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Shane thanks for the missing piece in my puzzle. I am new to HD but just bought a 2000 FLHRCI. Tensioner time. Im going to replace OEM and am NOT cutting the pushrods. You just showed me how the top end works Im now confident I can do the job. Will watch your series very informative.

@How2Wrench

3 жыл бұрын

Thanks for subbing! High 5 us with a donation: www.paypal.me/how2wrench Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin

Thanks for the videos Shane. I have a lot of automotive experience but just starting into Harleys, so this is great. Little correction for this vid, if a customer is, complaining of a lot of OIL in their Air filter, then there maybe a problem with the flapper assembly.

You are the man Shane, thank you so much for sharing your knowledge and experience, great videos

@wessonshepherd9525

2 жыл бұрын

instaBlaster

Class dismissed! What a great resource! Thank you for taking the time to make this video.

@How2Wrench

3 жыл бұрын

Glad it was helpful! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Excellent stuff ! This will be my go-to , along with my FSM to replace my rocker box covers & lower housings ( I'm swapping them out to black) 2017 FXSB Softail Breakout 👍

@How2Wrench

5 жыл бұрын

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzread.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

Thanks Shane, very inspiring. Got a 2002 Road King I’m converting to carb among other things, these vids really help.

@How2Wrench

3 жыл бұрын

Glad to hear how you couldn’t do it without the videos. Here are the links to support us for this information and our work saving you money. Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Give us a high 5 here: www.paypal.me/how2wrench

Hate it when the customer complains there's a lot of air in the oil filter. LOL 7:02 Sorry, just thought it was funny. Knew what you meant. Guilty of the same, happens all the time. Great video!

@How2Wrench

7 жыл бұрын

:)

Can someone explain why the pushrods have to come out when doing a cam upgrade. Is just to remove the pressure of the lifter from the cam base circle?

@Knightrider1506

Жыл бұрын

That's it. That way, the cam isn't pushed down as you remove the cover and damage the cam bearing surface or damage the case..

@515moto

Жыл бұрын

I've actually done a number of them since I posted this. One with adjustable quickie push rods. The rest I reuse the OEM's. At this point I'll never use adjustables again.

Youre good at your work brother. I now have no fear of ever removing my rockers on my 02 CVO

@How2Wrench

7 жыл бұрын

Please use the contact form link below. You're in luck. I do offer personal service to back up what's missing from a video to fix your specific problem. Live Chat is great for you to actually show your specific issue! Become a member of my website. It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline! Sign up now to have my personal cell phone number on speed dial! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of our learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? Contact form: how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Donation link: www.paypal.me/how2wrench

Great video! I appreciate the level of detail!👍🏽

@How2Wrench

6 жыл бұрын

Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

Very informative videos. Thanks.

Great video!

Excellent video! Everything is explained real clear.

@How2Wrench

3 жыл бұрын

Glad to hear how you liked the videos. Here are the links to support us for this information and our work saving you money. Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Give us a high 5 here: www.paypal.me/how2wrench

i have a 2013 harley road king with 15000 miles i resently discovered an oil leak on the lower rear rocker cover what can you suggest is it common to have this happen with this low miles do i have to replace the lower rocker cover gasket or can i re torke the lower rocker cover

Nice vid thanks. Getting ready to powder coat, and found this very helpful!

I'm trying to do more of the fast forwarding of the non-essential material so you fans don't have to!

@ericp377

7 жыл бұрын

Shane Conley thanks for the videos they really helped me with an old Softail I had

@jaysmith722

6 жыл бұрын

Shane Conley hey man you videos are life savers haha, was wondering if I could email a video of my 2000 fxdx running at idle makeing a Loud tick, while coughing white smoke any ideas off the top of your head? I was figureing piston rings or value seals cause of the smoke. As far at the tick/clink something broken in the pushrod/ lifter area? Thanks for the help

Awesome video! Really appreciate the level of details you explain!

@How2Wrench

Ай бұрын

We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

If I was just changing cams, would I still have to remove the bottom rocker box? Looks like the push rods can be removed after the rocker arm assembley is removed.

Awesome dude thanks for the video I can go finish putting my bike back together now. You Da Best

@How2Wrench

8 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Damn good edumication here! Thank you, Sir!

@How2Wrench

5 жыл бұрын

Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! kzread.info/dash/bejne/oXWZutxqnseTlbQ.html (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzread.infoplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!

good stuff man. you know your craft.

@How2Wrench

Жыл бұрын

Thanks Kevin. You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Is this for a 2001 softail too?. I need to do top end removal to replace head gasket. Im new to this. Your videos are great! Thank u.

excellent instruction,thank you

@How2Wrench

2 жыл бұрын

Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

how would you know if you had air in your oil filter? oil in your air filter I can see but the other way around.

Great information thank you guys

@How2Wrench

2 ай бұрын

We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

you guys are amazing

@How2Wrench

7 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

thank you much

Great video. Thank you.

@How2Wrench

2 жыл бұрын

You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Shane,, since I just got my 1st HD (2001 Dyna Low Rider TC88 with CV carb) this is a great channel thanks. I need to replace rocker cover, rocker lower box and both tappet covers. How hurt or different will that be with engine on the bike? What to look for?

@How2Wrench

6 жыл бұрын

Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

@7:07...you said "air in the oil filter".......is that correct> or did you mean to say oil in the air filter? I am getting quite a lot of oil coming out of the rocker gasket..and I am thinking this air/oil valve might me something I should check.

@Roddzilla71

6 жыл бұрын

He definitely meant oil in air filter,,,said it backwards.

Thank you. This is a life time an a life earnings worth of info. This engine is super simple but at the same time lots of very cool design features and awesome engineering. I can't wait to start my top end tear down this week. Your videos make the world a better place brother.

@How2Wrench

2 жыл бұрын

Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Hi Shane, I just changed my Tensioners on my 03 twin cam 88. I used a new tool to change the secondary tensioner without removing the cams from the plate. When I try to put the rockers back on the pushrods alway seem to get tension on them as I begin to tighten them. I am at TDC but I don't get the relaxed rockers and pushrods as I begin to tighten down the assembly. I lined up the two timing dots on the sprockets and never took the inside cam chain off. Any thoughts on what I'm doing wrong?

@How2Wrench

6 жыл бұрын

I emailed you back. Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

Shane, are the pushrod lengths different for the 103 engines? (2015 Road Glide Special). Great videos sir, thanks very much!

Thank you

@How2Wrench

Жыл бұрын

You're welcome.

Great video! Thank you

@How2Wrench

6 жыл бұрын

Thank you! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My KZread has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com

@shaverlocal

6 жыл бұрын

subbed yesterday. Have you done one on twin-cam chain tensioners? I like the way you break them down so even a novice mechanic like me gets it.

@How2Wrench

6 жыл бұрын

Great. Taking a break for a bit and then going to hit it hard again.

Thanks

@How2Wrench

4 жыл бұрын

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Great video Would be interesting to point out where common noise comes from in there?

May want to make a note to blow the holes for excess oil so when you install the bolts it doesn’t break the bottom of the jugs.

@How2Wrench

4 жыл бұрын

Great tip.This is a series and thread cleaning and prep (both bolt and hole) are in the earlier videos. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Does this basic method apply to all the vtwin engines for this series your doing of the engine tear down and rebuild?

@How2Wrench

4 жыл бұрын

Yo! Want us to drop our wrenches and help you? We love helping subscribers…even on old videos! Help us grow friend! Here’s how: 1. Subscribe 2. Let us know and we will circle back 3. We answer your questions EVERY DAY 4. Feel free to call us too! 602-345-0432 Sound like a deal? You can always give us a high 5 here: www.paypal.me/how2wrench

Perfect lesson as I get ready to change top and bottom Rockers and new breathers, Do you have a re-assemble to go with this one? Thanks again for sharing.

@How2Wrench

Жыл бұрын

Glad it helped! We sure do, if you can spare $1.99 you get access to the entire series as a member (and 700 other videos!) Link below, join and we will send you the direct links to exactly what you want. You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend... Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Cool

outstanding attention to detail.. disassembly order reassembly order...differences between Evo and twin cam !

@How2Wrench

4 жыл бұрын

👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Just subscribed. Followed how to changed intake on 07 twin cam..3 times still leaking. New flanges and 2 different type of seals? Not sure what is the problem?

@How2Wrench

2 жыл бұрын

Hi Chris. Let me try and see I can catch Shane to answer quick. He just returned from Africa training students this summer. His member inbox and one on ones get first response and he does try to get back to others. We are just the social media team. Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-service-60-minutes-one-on-one Note: If you are a new channel member please reply back and we will see your KZread Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!

At 7.07 he meant to say oil in the air filter if the umbrella valves are worn ! I have the same problem oil coming out air filter

@How2Wrench

7 жыл бұрын

Thanks Mr. You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research. Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community. Link to membership: how2wrench.com/product/membershipmembers-onlymembers? If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Direct link to services: how2wrench.com/product-category/tech-lineservice-callminutes/ Live Chat is great for you to actually show your specific issue! Donation link: www.paypal.me/how2wrench

Yup!

@How2Wrench

7 жыл бұрын

Thank you for the note and kind words. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html

Why is adding an external breather catch can modification so popular if there is a filter that prevents oil from going back into the air intake under a umbrella valve in the rocker box? Does the filter and umbrella valve not work well?

@How2Wrench

Жыл бұрын

Hi Nick, Hope this message makes sense to you as a decent human being that also works for a living and gets it. I’m the intern studying under Shane and on the social media team.. He's in the shop working or training a class. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! He does an AM and PM check in to answer all member questions. Consider joining...best $1.99 you'll spend this month 😁 Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Shane does try answer some non members questions when he get's some time so hang tight if joining is not an option for you. One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough... If you need help sooner choose or more personal his 1:1 option is below! Here’s the copy text: He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! A deep dive one-on-one with him is an option. Use video, email and phone support. Through the one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench

I'm currently rebuilding my engine that won't rotate, it's hung up on something, how can I remove the rockers with out being able to get top dead center

@How2Wrench

6 жыл бұрын

I'd be typing all day my friend. Reach out to me! Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: kzread.info/dash/bejne/qJ6qz6RpYcjIk9Y.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZread: kzread.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

Is it necessary to take the lower rocker box cover off every time you pull the pushrods?

@How2Wrench

4 жыл бұрын

I want to say no as long as there is room to remove the pushrod up and out. For example, some models may need that extra little side clearance a removed lower rocker gives. I would say if they come out then no for sure but keep in mind that it only a few bolts and you can get a new lower gasket in place and start its bday over. 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

great vids, the 90 degree socket tool you use with blue handle, would like to get one, who make them, thank

@gilbertquick2412

4 жыл бұрын

Can a missions be eliminated

@gilbertquick2412

4 жыл бұрын

Emissions

Not replacing that o-ring under the breather could it cause a P0108 code to come up? Map sensor? Replaced map sensor on my 04 flstci still getting code and intermittent hesitation. Driving me freaking nuts. Did a voltage test and I'm getting the correct voltage. I was thinking that the o-ring might have something to do with it? It however started to have that issue before I ever took the bike apart. Anyone have any thoughts on this?

@How2Wrench

4 жыл бұрын

If replacing the part related to the code doesn't solve something, think about downstream parts related to its fuction. Any ALWAYS replace orings, vacuum lines etc while making every connection correct. I'm sorry I can't be of more help. Anyone on here got a direction to point them you in? Please hit that subscribe button for us! 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/

Hi, I would like to know how it is that oil travels up to the valve side of the rocker box ? It's a 91 1200xlh engine

@How2Wrench

2 ай бұрын

Wish I knew but we just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your KZread handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!

I changed camplate, cams 525 fueling and used stock pushrods and lifters. I'm getting no oil pressure when started and high rev idle and a slight tapping I shut it down quickly. Its a 2006 flhxi 88ci. 26000 miles

@mountainman3rm

3 жыл бұрын

And fueling oil pump also

@How2Wrench

3 жыл бұрын

Hi friend. I try to answer when I've seen it before, but I don't recognize this one. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work. Want faster response times? Join link below. Thank you for commenting. Want more benefits? -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@How2Wrench

3 жыл бұрын

.

Is this applicable for a 2014 Twin Cam? I want to swap out my rocker boxes and rocker box covers.

@How2Wrench

Жыл бұрын

Hope this message makes sense to you as a decent human being that also works for a living and gets it. I’m the intern studying under Shane and on the social media team.. He's in the shop working or training a class. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! He does an AM and PM check in to answer all member questions. Consider joining...best $1.99 you'll spend this month 😁 Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Shane does try answer some non members questions when he get's some time so hang tight if joining is not an option for you. One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough... If you need help sooner choose or more personal his 1:1 option is below! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! A deep dive one-on-one with him is an option. Use video, email and phone support. Through the one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench

Can you reuse the stock pushrods if you are replacing the cams?

@How2Wrench

4 жыл бұрын

If stock cams yes for sure. I've always replaced because of habit, or ease (a must to leave the rocker boxes in place) or the sales "hype" of stronger. It has always seemed to me, the best pushrod would be non-adjustable and a set length. Wish I had a better answer for you. 🙌 🏁 First off, thank you for SUBSCRIBING! Love seeing our subscribers comment on how the video helped! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Nice video, question.... should the 1999- 2001 twin cam engine have lifter, push rod, rocker arm slight tapping noise? In a car NO but I have been told yes in twin cam engine.,To me no! What do you say?

Shane, just became a member after years of watching your content and I wanna say thanks for posting these how-to vids. They truly help the DIYer or entry level mechanics like myself! I noticed you used the heim joints to split the cases on a twin cam B, will this method work on the early A models? 01 engine case with the good pinion bearings, so I really don’t want to disturb the crank too much unless absolutely necessary. I have to split the cases to clean some metal particles from a botched inner cam bearing installation, so I’m doing a 95 big bore kit and new cams/oil pump/cam plate (hyd tensioner upgrade) while she’s tore down. If I do in fact have to press the crank out, do you recommend replacing the pinion bearings with new, (The bike ran great, no flywheel issues to my knowledge.) Or just compare the run out before and after reassembly?Any help is appreciated, thanks again!

@How2Wrench

3 жыл бұрын

Thanks for the support Dylan. You should have full access to all the videos ever made now (over 700!)

Probably a dumb question to you all but im freaking out! Do the pushrod tubes have exhaust pressure? I either blew my motor or need new pushrod tube gaskets! Please respond.

@fnelectric1

2 жыл бұрын

I'm looking to buy the scissor type tool u used In the video, could I get the info in order to purchase it. Thanks appreciate

Can a guy replace the umbrella valves and foam filters while the engine is in the frame?

@How2Wrench

4 жыл бұрын

I'm careful to say yes....I beleive so as all models I have in mind can. But I'm cautious enough to know there are exceptions. If you would like me to work directly with your model and give more detail, the links are below...👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Do you have a link to the first pushrod removal tool you used? I don't see it in your Tool Links section.

@How2Wrench

2 жыл бұрын

Looks like they don't make that model anymore. The new one is slick though. amzn.to/2ZaoOy7 Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZread Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@cmenzes

2 жыл бұрын

@@How2Wrench thanks for the reply.. That's what I was worried about. The pliers style looks nice. Sorry they don't make it anymore.

is this MMI material? what school and location is this? My papermill might be shutting down, might have to retrain. Thanks for the videos, these are a huge help

@How2Wrench

8 жыл бұрын

+Burrese Family This is not MMI and I would like to say I'm quite a different outside of the box training center in Sioux City Iowa. Limit of 24 students EVER. EXTREMELY affordable (aprrox...$6000) at community college prices with REAL world training. No fluff here. 712-274-6400 ext 1204 Shane Conley

@UndeadBan291

8 жыл бұрын

Thank you for the reply. These videos have really shown me alot. Do you have a harley fork assembly video?

the old style push rod clip remover/installer looks less awkward

@How2Wrench

4 жыл бұрын

Pretty hard to beat simple and effective right? 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

Intake pushrods are always shorter are they not?

@How2Wrench

3 жыл бұрын

Hi friend. I try to answer when I've seen it before, but I don't recognize this one. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work. Want faster response times? Join link below. Thank you for commenting. Want more benefits? -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

the new tool for push rod covers looked way to aggressive, wont be using one. great vid very profesional, it would of messed up the look of the vid if you had shown the oily wood clothes pins attached to that shiny twin cam, understand why it wasnt shown but the little things can make people relax and smile. thanx for posting

That first tool was better for the push rod covers

can I use 103 heads on my 88ci

@How2Wrench

7 жыл бұрын

I believe they will physically bolt on, but have no idea on if there would be a power gain or loss. Many factors come into account. One could assume the 103 has bigger valves. If a stock 88 cams are used then if may actually be worse. You would want to match the cams, valves size to desired performance. Also, you could possible loss performance by the heads having a larger cc capacity which would lower engine compression ratio.

@trentsellers7448

5 жыл бұрын

From the research I have done the SE 103 ci heads are the same as the SE 95 ci heads and the cylinders have the same size bore what makes it a 103 is a stroker flywheel assembly. My bike is a 01 springer and has the SE big bore cylinders and SE heads and 99% sure it has the stroker flywheel assembly. A HD tech was the original owner he knew what he was doing it is very impressive to ride definitely in the 100+ club it’s a ripper!

You mentioned a hypothetical customer complaining about air in their oil filter, perhaps you meant oil in their air filter?

Of coarse if you doing this IN THE BIKE forget about power tools Buy a 1/4 drive 7/16th socket to grind down & be prepared to undo & remove the front motor mount fuel tank coil assembly . Putt the spark plugs out Jack it up put it in 6th gear to rotate engine & put back in so you dont drop anything down the open spark plug hole Front one is easy back one is tougher but not too bad if on a street glide or bagger. Definitely have to jack up & down the engine

@How2Wrench

8 ай бұрын

I've seen Shane share these links before. Some models can get away with the low clearance tools like these: amzn.to/3Rm4Vw9 or this one amzn.to/3Rn1mEX We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZread Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

Where is you school at ?

@How2Wrench

4 жыл бұрын

That school was in Iowa...It closed..😔I do offer one on one or group training now...reach out to me 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com

@isaacdelgado38

4 жыл бұрын

Shane Conley So you still in Iowa ? And how is that one on one works? Is that o. The weekends? Please I’m interesting let me know thanks

@How2Wrench

4 жыл бұрын

@@isaacdelgado38 Hi Isaac. Check out the about tab here on KZread and then just give me a call to discuss your wants and needs. 602-345-0432

مفيش تغير فى تصمبم المحرك ابدا

Came here because I’d like to have my chrome pushrods and rocker box covers plated in brass but boy oh boy... I don’t think I got the nerve to break all this down myself.

@How2Wrench

3 жыл бұрын

😬 Thanks for subbing! High 5 us with a donation: www.paypal.me/how2wrench Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin

why don't you just go ahead and go ahead....?

@How2Wrench

4 жыл бұрын

?

@duggydugg3937

4 жыл бұрын

Shane Conley just wondering why so many you tubers seem to need a crutch phrase such as ' i'm going to go ahead and...' before they say why they are going to do....🤔

no technology at all 😟

@How2Wrench

6 жыл бұрын

But people still love them and someone has to fix them! :) Have you Subscribed yet to never miss a video? Have you seen the video playlists kzread.infoplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

Excellent video!

@How2Wrench

3 жыл бұрын

Glad you liked it! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

Do you have a reinstallment of stock pushrods after upgrading cams and cam chest...?

@How2Wrench

3 жыл бұрын

We sure do bud...two ways to access the entire playlist and over 700 videos. Donate a supporting high five or simply join the channel! Links below and thank you in advance. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzread.info/dron/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench