I knew when I seen a cowboy 🤠 this was going to be a legit video! When he hung off the bracket, I was sold. 💯😊☝🏼 THANKS so much for making this! Toggle bolts here I come! 🙌🏼🙌🏼🙌🏼🙌🏼

@BixnoHandyLLC

4 жыл бұрын

ROYAL RED Thank you so much 🙏🏻 Good luck with your project, and have fun using the toggle bolts! 🤠 📺 💪🏻

Man, this is a good video. I've been struggling lately mounting televisions and this is pretty explanatory.

@BixnoHandyLLC

5 жыл бұрын

Master Moe Thank you sir 🤠

Nice Boards of Canada I. The background!

@BixnoHandyLLC

5 жыл бұрын

Joshua Hadden Mahalo 🙏🏻

Spooky mounting music there cowboy.

@BixnoHandyLLC

5 жыл бұрын

Rhabdo B Thanks 🤠

@hunterstone6247

5 жыл бұрын

@@BixnoHandyLLC What song is this? It's driving me crazy because I have heard it before, and I know it's not Spoon.

@BixnoHandyLLC

5 жыл бұрын

Hunter Stone “Who makes your money” by Spoon

@hunterstone6247

5 жыл бұрын

@@BixnoHandyLLC Wait, I think it's Dayvan Cowboy by The Boards of Canada. It was driving me crazy all day thinking of it! Thanks again for the great instruction video!!

@BixnoHandyLLC

5 жыл бұрын

Hunter Stone You’re welcome 😊

Thanks for the video. Would strap toggle bolts be strong enough to hold a 65” Television?

@BixnoHandyLLC

5 жыл бұрын

Nobody's Home Yes, the 1/4” Hillman Group “strap toggle bolts” should be strong enough to hold your 65” television as long as you install them correctly. I prefer using at least four toggles/bolts - one in each corner of the bracket. According to the manufacturer, each 1/4” strap toggle bolt is rated for 80 pounds in drywall/sheetrock if the bolt is installed properly. I recommend also mounting the bracket to a wood stud if you have access to one. Good luck with your project 📺 🤠 💪🏻 Regards, Nolan Bixler BixnoHandy.com

I've never heard those called Strap Toggle Bolts. I know them as Snap Toggle Bolts. Are they the same thing or different? They look exactly the same as Snap Toggle Bolts, although we didn't get a closeup view in your video.

@BixnoHandyLLC

5 жыл бұрын

runemesa I call them “Strap” toggle bolts - so does Home Depot 😉 Here’s the link brother: www.homedepot.com/p/The-Hillman-Group-1-4-in-Strap-Toggle-12-Pack-376363/203754353

Also, you know how the mount comes with specific screws you need to use, do you instead use the one you provided for us?

@BixnoHandyLLC

6 жыл бұрын

rana Mozeb If you install the strap toggle bolts correctly, mounting your television on a stud is not essential. Securing the television to a stud is usually recommended, but sometimes the wall construction, mount design, or TV placement does not allow you to use a stud. That’s where the strap toggle bolts come in 😊

@mastermoe8072

5 жыл бұрын

Amy Mury exactly 🤦‍♂️

@BixnoHandyLLC

5 жыл бұрын

Amy Mury You will need to use the machine screws that come with the mount to secure the arms to the television 🔩 In regards to securing the bracket to the wall - most mount kits include a set of lag/wood screws (stud mounting) and concrete anchors. However, the mount kits do not usually include strap toggle bolts or drywall anchors. You will need to purchase the strap toggle bolts separately 👍🏻 Strap toggle bolts can also be used in conjunction with the lag screws in order to increase the security of your mounting job 😁 Mahalo 🙏🏻

Was this on a hollow plaster

@BixnoHandy

3 жыл бұрын

According to the owner of the home, the wall in the bedroom was made of "lath and plaster" from the 1920s, which forced us to use strap toggle bolts to secure the television to the wall. There were no studs to drill into on this particular wall. Thank you for your comment. Good luck on your handyman projects!

I have a 50 inch TV that I need to hang on a plaster wall. Can I use those strap toggle bolts to hang my TV? Also, will those also work on dry wall?

@BixnoHandyLLC

6 жыл бұрын

Yes, the strap toggle bolts will work for installation on drywall (sheetrock) or plaster. Good luck mounting your 50” television Mark! 😊

@mkdsk101

6 жыл бұрын

Thank you for your answer. Would you have a link of which strap toggle bolts I would need safely hang my mount for my 50 inch tv to buy at Home Depot?

@BixnoHandyLLC

6 жыл бұрын

Mark Komar Of course! Here is the link: www.homedepot.com/p/The-Hillman-Group-1-4-in-Strap-Toggle-12-Pack-376363/203754353 Take care 😊

@mkdsk101

6 жыл бұрын

Are you sure these will hold my 50 inch TV to my plaster wall safely? They are only 1/4 inch.

@BixnoHandyLLC

6 жыл бұрын

Watch the video - you can see me hanging off the mount at 4:10 😎

Video is ok but the info provided isn't good for a heavy tv on lathe and platter as it will fail over time. The tv you have there is light weight. Snap Toggles are great in dry wall.

@BixnoHandyLLC

3 жыл бұрын

Thank you for your input! You make an excellent point about the weight of the TV! The LCD television that I install in the video is a smaller TV compared to larger LEDs that are commonly purchased in today’s market. Feel free to use different hardware and consult a different provider for hanging larger televisions in lathe and plaster. Thank you for your comments 😊

Thanks, all the info I needed, and not in some stupid 25” video. Brevity is important.

@BixnoHandyLLC

5 жыл бұрын

flynbenny You’re welcome sir 🙏🏻

what if the plaster wall is in front of a brick wall?

@BixnoHandyLLC

5 жыл бұрын

Matthew Rodriguez Then you’ll need a rotary hammer and longer bolts 😉

That's not a brass drill. It's a steel drill with a titanium nitride coating.

@BixnoHandyLLC

6 жыл бұрын

M Jones You’re right! I misspoke - it’s not a brass drill bit. Thanks for the correction 🤠

@rhabdob3895

5 жыл бұрын

Ohhohoho burn!

So if I use the 1/4 in strap toggle, I won’t need to mount the tv on a stud for plaster wall?

@BixnoHandyLLC

6 жыл бұрын

rana Mozeb If you install the strap toggle bolts correctly, mounting your television on a stud is not essential. Securing the television to a stud is usually recommended, but sometimes the wall construction, mount design, or TV placement does not allow you to use a stud. That’s where the strap toggle bolts come in 😊

@m3ccarthy

6 жыл бұрын

No, as long as you use the toggle bolts

@ElijahLynn

5 жыл бұрын

Toggle bolts are the best! I always have them in my toolbox! It allows you to mount things wherever _you_ want them, not where studs dictate. Sometimes you hit a stud and you end up with a half stud/half toggle bolt install, which is fine. Toggle bolts give you the flexibility you need to mount _anywhere_.

@BixnoHandyLLC

5 жыл бұрын

Amy Mury You will need to use the machine screws that come with the mount to secure the arms to the television 🔩 In regards to securing the bracket to the wall - most mount kits include a set of lag/wood screws (stud mounting) and concrete anchors. However, the mount kits do not usually include strap toggle bolts or drywall anchors. You will need to purchase the strap toggle bolts separately 👍🏻 Strap toggle bolts can also be used in conjunction with the lag screws in order to increase the security of your mounting job 😁 Mahalo 🙏🏻

@BixnoHandyLLC

5 жыл бұрын

Amy Mury You will need to use the machine screws that come with the mount to secure the arms to the television 🔩 In regards to securing the bracket to the wall - most mount kits include a set of lag/wood screws (stud mounting) and concrete anchors. However, the mount kits do not usually include strap toggle bolts or drywall anchors. You will need to purchase the strap toggle bolts separately 👍🏻 Strap toggle bolts can also be used in conjunction with the lag screws in order to increase the security of your mounting job 😁 Mahalo 🙏🏻

Visit BixnoHandy.com for a free quote!