Wow, what an ordeal to remove plastic… Those trim triangles were the most difficult to remove. I used trim tools and was gentle, but I also tweaked a couple of those plastic thingies, one broke off in the console clip.😩 (Thankfully I bought a plastic welder before embarking on my Jetta improvements knowing I’d break off or split at least one plastic part. Next stop: 3D printer…👍🏼) Thank you for this video. It’s very thorough. You’re in my Jetta, on my iPad, with me while I do this project. 😄

Thank you this helped. I wasn’t pulling the parking break up enough and it was blocking the consoles exit!

@Servicetutorials

2 жыл бұрын

Thank you for your feedback!

Super detailed video thank you!

@Servicetutorials

3 жыл бұрын

Thank you too for watching our video! 👍

Thanks! Very helpful

@Servicetutorials

5 жыл бұрын

Thank you for watching!

Thanks so much, mate!

Hello, you have made an excellent tutorial video, thank you very much

@Servicetutorials

3 жыл бұрын

Thank you for watching!

Thanks A lot for this video....❤️❤️❤️

@Servicetutorials

3 жыл бұрын

Thank you for watching!

Fantastic 😊

Thanks So Much!! I would have broken some parts for sure without this one. 🙌

@Servicetutorials

4 жыл бұрын

Toriano Evans Thank you for watching!

If you are here because you only want to replace the slider of the cup holder, you dont need to remove everything. Just push aside the top part of the slider and slowly insert your new cover slider thing until its all in ( you have to remove the old one first if it was broken like mine, i just used something to push it out via the holes beneath the rubber mats/padding. hope this helps someone

@amirc20

4 жыл бұрын

Hello Ar T, I have the same problem with my car but I need more details on how you put back the new slider(the old one I remove it as you described here)

@xxjunkemodzxx1305

Жыл бұрын

did you get it?

@xxjunkemodzxx1305

Жыл бұрын

​@@amirc20.

@zahimiibrahim3602

8 ай бұрын

Thanks for the tip, I don't look forward to removing the whole console for this one small thing. I'll try your method first.

Excelente video 👌 tal cual...

@Servicetutorials

Жыл бұрын

Thank you for the feedback!

Did you think about removing the nob and the boot before removing the console? Would've been easier than that struggle at the end of the video

@Skoalcwby77

3 жыл бұрын

would of been 200x easier.

I have a mk6 golf right side panel is a bit loose and it vibrates when i press gas pedal. How do i fix it?

Can you do this without removing the arm rest?

Need to run a wire from head unit to hand brake switch - is this the best way - thx

very performance , by from Germany :-))

Did the armrest have to come out first to do this ? Thanks

@Servicetutorials

5 жыл бұрын

Nick Fadis Yes, Nick! You have to remove the armrest first.

@nicky1271

4 жыл бұрын

@@Servicetutorials how you managed to pull up the handbrake high enough to take out the console?

@lachlanmccutcheon527

2 жыл бұрын

@@nicky1271 did you ever work this out?

You have to remove the rear part of the central console right? The console won't move with the rear part installed

@Servicetutorials

4 жыл бұрын

Hellomoneyful Yup! You have to do exactly like I showed in the video tutorial.

@ASSOpid

3 жыл бұрын

@@Servicetutorials You never showed how to remove the armrest/rear section of the console. It just wasn't there after step 10.

@Servicetutorials

3 жыл бұрын

@@ASSOpid We have another video tutorial for armrest: kzread.info/dash/bejne/iKBkvK6Rj6vOqNY.html

Haida he 1

That handbrake has got cancer. Lol

@Servicetutorials

3 жыл бұрын

:))

Invest in some power! And I don't need to see you unscrew every freaking screw!

@stringsnare

5 жыл бұрын

Shut up dont complain free advice u knob

@uMadness

4 жыл бұрын

huh??

what a load of crock