I made these pieces last night just for fun , and I have recorded the process so you may see how these are made , and you may do much better than me 😍💜 #resinart #resinpyramid #resinepoxy
Жүктеу.....
Пікірлер: 47
@ameliarodrigues91245 күн бұрын
Wow they are all amazing
@vivilee705
5 күн бұрын
Thank you very much ❤😍
@iwonascreations6144 Жыл бұрын
All your pyramids are unique and very beautiful 😍💜
@lorrainebateman8799 Жыл бұрын
Stunning! ❤️👍
@sherron448 ай бұрын
Where did you get your small pyramid molds? I ordered small ones and they are not straight sided.
@EmberDione3 ай бұрын
Hi! I just wanted to say - thank you so much for posting your videos! I kept having this issue with Alcohol Inks in my resin projects and NO ONE ELSE seemed to have the same problem (my inks were sinking to the bottom and not curing properly despite not using sinker ink!). Then you EXPLAINED IT!!! Thanks! (I need to mix them with a little bit of resin before pouring them in for the smokey effect!)
@vivilee705
3 ай бұрын
Thank you for your comments herewith❤ 😃, however , I use regular resin dye in this video and I didn’t use alcohol ink here 🥹, so I am not sure whether it would lead to the same result or not , let me know after your new try ~ 🩷👍
@EmberDione
3 ай бұрын
IT TOTALLY WORKED. XD I am using alcohol inks that are marketed AS a dye for Resin, but they sink too fast for the resin so I end up with wet pools of uncured mess at the bottom of the mold. BUT in your video you mix the dye you want to "swirl" with resin first, just a tiny bit - which is the step I was missing. I went back to other videos and MOST people do the same thing they just don't mention it! XD@@vivilee705
@Aangel452 Жыл бұрын
Very pretty😀
@nereidahenriquez24 күн бұрын
Hermoso tu trabajo, gracias por compartirlo y darnos ideas para hacer las pirámides en resina. Cuanto tiempo dejar secar entre capas?
@vivilee705
24 күн бұрын
Thank you for your appreciation ❤ the timing between the 2 layers depends on your resin and your temperature, sometimes the depth of the pour would matter too. In my video I waited about 2 -3 hours between ;)
@mywifetheartist2 ай бұрын
So pretty. ❤❤❤
@vivilee705
2 ай бұрын
Thank you 😍🩷🙏
@deborahnoble7361 Жыл бұрын
these are lovely beautiful job
@carljohnson52539 ай бұрын
Hello, I love your work, I only hope to be able to create such beautiful pieces. Would you mind sharing the brand of resin you use? Mine is curing way too fast. Thanks
@vivilee705
8 ай бұрын
The resin I used to use is just ok , I think every brands are mostly the same , but we just need to be careful of the portion .
@noreasonjustresin Жыл бұрын
Wow!! So amazing and fun. Great tutorial. I might have to try this now!
@IYAOYAS69697 ай бұрын
9:40, 10:11, 11:04 are my favorited WOW
@soulelee Жыл бұрын
The video moved a bit too fast to see what products you were actually using. What are glass bubbles? Thanks for sharing.
@vivilee705
Жыл бұрын
Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1
@annadziewanna9250
Жыл бұрын
Thanx for your answer Vivi. I also found mini glass bubbles named as decoupage snów effect bubbles
@fairyspunfibers9098
Жыл бұрын
@missy soule Just slow down the video. I used ½ speed. 😊
@soulelee
Жыл бұрын
@@fairyspunfibers9098 Thanks for your reply. I didn't even know I could do that!
@judeediehl
Жыл бұрын
@@annadziewanna9250 did you find on USA Amazon? Still looking for them
@Meagain9215 ай бұрын
Thank you……some good tips. Lovely effects. Subscribed.
@vivilee705
5 ай бұрын
Thank you for your encouragement 🥹❤️💕
@fairyspunfibers9098 Жыл бұрын
Really pretty! You have good color sense. 😊 I also like the Petri effect on the ones where you used the sinker white. Not too much, not too little...just right! I often use too much. 😊😁 I noticed you waited about 2 hours before dropping in the alcohol inks and sinker white. Is that because your resin is a thinner, long-cure resin? New sub, here. 😊👍
@vivilee705
Жыл бұрын
Thanks for your kind message ❤ in this video I didn’t use any alcohol ink, so there is no sinker either , everything is with regular resin pigments🥹. My resin is not a deep pour resin , I waited 2 hours is to avoid the colors drop down too much to the bottom end 🥹 hope this info helps❤️
@fairyspunfibers9098
Жыл бұрын
Ah, my mistake, Vivi! I thought you used sinker white. I need to rewatch this! Thanks for replying! 😊👍
@elchuppacabra23713 ай бұрын
Bonjour , travail et rendu magnifique !!👌 cependant comment faites-vous pour que toutes les couleurs et les formes structurées ne se délitent pas dans les mélanges ??! 🤔
@vivilee705
3 ай бұрын
Bonjour, c’est pour cette raison que j’ai mis une phrase dans ma vidéo « 2 hours later » ce qui veut dire qu’il faut attendre que le résine soit un peu épaissis , et on ajoute la couleur et on fait le technique « swirl » à ce moment là . Merci pour votre commentaire 🩷🫶🍀
@elchuppacabra2371
3 ай бұрын
D’accord , merci beaucoup d’avoir pris le temps de me répondre 👍 cependant je pense qu’il y a une information très importante à prendre en compte et souvent omise…, la température du mélange ! A ce sujet , à quelle température de résine précisément, faut il faire les mélanges de couleurs ? ( car chez moi même plusieurs heures après , malgré toutes les recommandations d’usage, mes couleurs se mélangent complètement et mes créations sont ruinées…. ) donc je pense qu’il y a d’autres aspects à prendre en compte et qui ne sont pas forcément énoncés …. Je vous serais très reconnaissant de bien vouloir me donner les meilleures conseils et astuces techniques le plus détaillés à ce niveau là car , étant très passionné par la résine , je désespère littéralement d’arriver un jour à obtenir un degré de perfection similaire à vos créations qui sont absolument magnifiques !!! Merci par avance !! 👌
@MyleneBreem4 ай бұрын
What kind of resin do you use 5cm and more or less than 2cm please? It's beautifull
@vivilee705
4 ай бұрын
I use this brand « Resin Pro » an italien brand , it’s said to pour not more than 2.5cm but I often pour more than that 😅
@eddievalenzuela3009
2 ай бұрын
Is it a slow cure? If I pour that much after 2 hours it's way too cured to do that...by slow I mean like72hours or more
@vivilee705
Ай бұрын
@@eddievalenzuela3009 it’s a regular classic epoxy resin which cures in 24 hours.
@Trina75942 ай бұрын
Amazing!!!
@vivilee705
2 ай бұрын
Thank you dear 🩷🫶😘
@sindymccormick3045 Жыл бұрын
What did you mix the alcohol ink and mica powder with, was it resin the clear liquid?
@vivilee705
Жыл бұрын
It’s clear resin …😄 after mixing the resin you take small amount ( like 2-3 drops ) for each color you want to add to your projet .
@annadziewanna9250 Жыл бұрын
I am also interested in the glass bubbles. Could you say the name please
@vivilee705
Жыл бұрын
Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1
@mothersofmurderedsonsandda3886Ай бұрын
Hey I a new sub...
@katielybАй бұрын
I would stray away from mixing shades of green with shades of orange, red, purple, and pink because it turns muddy, or brownish. That's my personal opinion really but, i thought i should mention it.
@vivilee705
Ай бұрын
You are absolutely right 😄 I didn’t have enough experience to choose the right colors mixing , and I will keep on trying from mistakes 😄
@LaurenceLegrand-tz9jqАй бұрын
Dommage pour un tutoriel que la vidéo soit en accélére impossible de comprendre et voir correctement ce que vous faite il aurait mieux valeur faire une seule pyramide et bien expliquer les étapes
@vivilee705
Ай бұрын
Bonjour, vous pouvez très bien ralentir la vidéo en cliquant le bouton sur le haut a droit de votre écran . Je vous souhaite très bon après midi ❤
Пікірлер: 47
Wow they are all amazing
@vivilee705
5 күн бұрын
Thank you very much ❤😍
All your pyramids are unique and very beautiful 😍💜
Stunning! ❤️👍
Where did you get your small pyramid molds? I ordered small ones and they are not straight sided.
Hi! I just wanted to say - thank you so much for posting your videos! I kept having this issue with Alcohol Inks in my resin projects and NO ONE ELSE seemed to have the same problem (my inks were sinking to the bottom and not curing properly despite not using sinker ink!). Then you EXPLAINED IT!!! Thanks! (I need to mix them with a little bit of resin before pouring them in for the smokey effect!)
@vivilee705
3 ай бұрын
Thank you for your comments herewith❤ 😃, however , I use regular resin dye in this video and I didn’t use alcohol ink here 🥹, so I am not sure whether it would lead to the same result or not , let me know after your new try ~ 🩷👍
@EmberDione
3 ай бұрын
IT TOTALLY WORKED. XD I am using alcohol inks that are marketed AS a dye for Resin, but they sink too fast for the resin so I end up with wet pools of uncured mess at the bottom of the mold. BUT in your video you mix the dye you want to "swirl" with resin first, just a tiny bit - which is the step I was missing. I went back to other videos and MOST people do the same thing they just don't mention it! XD@@vivilee705
Very pretty😀
Hermoso tu trabajo, gracias por compartirlo y darnos ideas para hacer las pirámides en resina. Cuanto tiempo dejar secar entre capas?
@vivilee705
24 күн бұрын
Thank you for your appreciation ❤ the timing between the 2 layers depends on your resin and your temperature, sometimes the depth of the pour would matter too. In my video I waited about 2 -3 hours between ;)
So pretty. ❤❤❤
@vivilee705
2 ай бұрын
Thank you 😍🩷🙏
these are lovely beautiful job
Hello, I love your work, I only hope to be able to create such beautiful pieces. Would you mind sharing the brand of resin you use? Mine is curing way too fast. Thanks
@vivilee705
8 ай бұрын
The resin I used to use is just ok , I think every brands are mostly the same , but we just need to be careful of the portion .
Wow!! So amazing and fun. Great tutorial. I might have to try this now!
9:40, 10:11, 11:04 are my favorited WOW
The video moved a bit too fast to see what products you were actually using. What are glass bubbles? Thanks for sharing.
@vivilee705
Жыл бұрын
Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1
@annadziewanna9250
Жыл бұрын
Thanx for your answer Vivi. I also found mini glass bubbles named as decoupage snów effect bubbles
@fairyspunfibers9098
Жыл бұрын
@missy soule Just slow down the video. I used ½ speed. 😊
@soulelee
Жыл бұрын
@@fairyspunfibers9098 Thanks for your reply. I didn't even know I could do that!
@judeediehl
Жыл бұрын
@@annadziewanna9250 did you find on USA Amazon? Still looking for them
Thank you……some good tips. Lovely effects. Subscribed.
@vivilee705
5 ай бұрын
Thank you for your encouragement 🥹❤️💕
Really pretty! You have good color sense. 😊 I also like the Petri effect on the ones where you used the sinker white. Not too much, not too little...just right! I often use too much. 😊😁 I noticed you waited about 2 hours before dropping in the alcohol inks and sinker white. Is that because your resin is a thinner, long-cure resin? New sub, here. 😊👍
@vivilee705
Жыл бұрын
Thanks for your kind message ❤ in this video I didn’t use any alcohol ink, so there is no sinker either , everything is with regular resin pigments🥹. My resin is not a deep pour resin , I waited 2 hours is to avoid the colors drop down too much to the bottom end 🥹 hope this info helps❤️
@fairyspunfibers9098
Жыл бұрын
Ah, my mistake, Vivi! I thought you used sinker white. I need to rewatch this! Thanks for replying! 😊👍
Bonjour , travail et rendu magnifique !!👌 cependant comment faites-vous pour que toutes les couleurs et les formes structurées ne se délitent pas dans les mélanges ??! 🤔
@vivilee705
3 ай бұрын
Bonjour, c’est pour cette raison que j’ai mis une phrase dans ma vidéo « 2 hours later » ce qui veut dire qu’il faut attendre que le résine soit un peu épaissis , et on ajoute la couleur et on fait le technique « swirl » à ce moment là . Merci pour votre commentaire 🩷🫶🍀
@elchuppacabra2371
3 ай бұрын
D’accord , merci beaucoup d’avoir pris le temps de me répondre 👍 cependant je pense qu’il y a une information très importante à prendre en compte et souvent omise…, la température du mélange ! A ce sujet , à quelle température de résine précisément, faut il faire les mélanges de couleurs ? ( car chez moi même plusieurs heures après , malgré toutes les recommandations d’usage, mes couleurs se mélangent complètement et mes créations sont ruinées…. ) donc je pense qu’il y a d’autres aspects à prendre en compte et qui ne sont pas forcément énoncés …. Je vous serais très reconnaissant de bien vouloir me donner les meilleures conseils et astuces techniques le plus détaillés à ce niveau là car , étant très passionné par la résine , je désespère littéralement d’arriver un jour à obtenir un degré de perfection similaire à vos créations qui sont absolument magnifiques !!! Merci par avance !! 👌
What kind of resin do you use 5cm and more or less than 2cm please? It's beautifull
@vivilee705
4 ай бұрын
I use this brand « Resin Pro » an italien brand , it’s said to pour not more than 2.5cm but I often pour more than that 😅
@eddievalenzuela3009
2 ай бұрын
Is it a slow cure? If I pour that much after 2 hours it's way too cured to do that...by slow I mean like72hours or more
@vivilee705
Ай бұрын
@@eddievalenzuela3009 it’s a regular classic epoxy resin which cures in 24 hours.
Amazing!!!
@vivilee705
2 ай бұрын
Thank you dear 🩷🫶😘
What did you mix the alcohol ink and mica powder with, was it resin the clear liquid?
@vivilee705
Жыл бұрын
It’s clear resin …😄 after mixing the resin you take small amount ( like 2-3 drops ) for each color you want to add to your projet .
I am also interested in the glass bubbles. Could you say the name please
@vivilee705
Жыл бұрын
Perles à Bulles de Verre Mini Perles à Bulles Petites Perles Rondes Non Poreuses Perles à Bulles de Gouttelettes D'eau pour la Fabrication de Résine et les Arts des Ongles amzn.eu/d/ff0q6w1
Hey I a new sub...
I would stray away from mixing shades of green with shades of orange, red, purple, and pink because it turns muddy, or brownish. That's my personal opinion really but, i thought i should mention it.
@vivilee705
Ай бұрын
You are absolutely right 😄 I didn’t have enough experience to choose the right colors mixing , and I will keep on trying from mistakes 😄
Dommage pour un tutoriel que la vidéo soit en accélére impossible de comprendre et voir correctement ce que vous faite il aurait mieux valeur faire une seule pyramide et bien expliquer les étapes
@vivilee705
Ай бұрын
Bonjour, vous pouvez très bien ralentir la vidéo en cliquant le bouton sur le haut a droit de votre écran . Je vous souhaite très bon après midi ❤