New parts ordered… 600 hp or engine explosion coming soon! Check out the street test drive here kzread.info/dash/bejne/m3eEzJuahq-6idI.htmlsi=UoIrY_b2ezKjxCL0

@StuntinStar.1

4 ай бұрын

Could you guys make an ep85 awd 5efte that would be sick!!!

@Lorden350

4 ай бұрын

Is the dog makes 600 hp no way you guys are celebrating without me.

@bustjanzupan1074

3 ай бұрын

Thanks . What's the engine ? Pwy from Eu.

@operator8014

3 ай бұрын

Hope new motor mounts are in that parts list.

@MattBerrymotorsport

3 ай бұрын

@@operator8014no way 😂

I was waiting for the motor to do a backflip over the roof of the Starlet lol

Those Factory Engine Mounts Holding on For Dear Life 😂😂

@SpaceMissile

3 ай бұрын

not sure which rubber piece is getting more abuse - the mounts or the tires lmao

@Mystical_Zeus

3 ай бұрын

@@SpaceMissile Tires -_ -

@SpaceMissile

3 ай бұрын

@@Mystical_Zeus tIrEs 😒 🤡

Nothing better than changing main bearings with the engine still assembled 😂

dont even say "probably shouldnt do this in the car" this is camp dogs

9:15 The charge piping holding on for dear life lmao

@HowToTurbo

4 ай бұрын

5mm away from the 500hp goal 😂

I just randomly got recommended this channel and I figured you guys were a huge channel. Seems like youre criminally underrated. Cheers from America

@MattBerrymotorsport

4 ай бұрын

We thought we were huge at 500 subs.

From a lil 1.3! Impressive!!!

@str11pes

4 ай бұрын

IT's a 1.3L and Auto?!?! wow

@garageamsterdam

4 ай бұрын

It might be 1.5l pretty much the same engine only more displacement

@campdog2023

4 ай бұрын

@@garageamsterdam1.3

@justins21482

3 ай бұрын

you gotta be shitting me, and here I thought my 1.4 fiat 500 wouldnt be up to the challenge lol

All the faded signs on the front bumper is so cute

6:39 that pure joy when you feel the Nitrous is awesome. good work boys!

Guys over here in the UK blowing up forged 4EFTEs @300hp crank . You guys making 500whp is just bonkers. Favourite channel on YT currently! Keen to see 600!

@xinx-fn8973

4 ай бұрын

It’s probably the torque that’s killing them lol

@campdog2023

4 ай бұрын

@@xinx-fn8973it’s the small rear housings

@davidgriggs3967

4 ай бұрын

That big turbo is keeping it out of boost until the maximum torque starts to drop off, then it kicks in and pulls like a train . Boost and hp do not bend rods torque does . You can control torque in the midrange with a small turbo by retarding ignition timing where it makes it's most torque and readvancing it as the torque drops off up towards redline.

@campdog2023

3 ай бұрын

@@davidgriggs3967nah the problem is using small turbos. Retarding timing in the mid range is just trying to cope with the underlying issue…adding timing back in the top end is not a good idea either…it’s the main reason why so many of these engines are blowing head gaskets and damaging bearings

@davidgriggs3967

3 ай бұрын

@campdog2023 Arp head studs are a must on those builds , boost and detonation lifts heads . If you keep driving your car with a lifted head and low oil pressure, then of course you're going to toast bearings.

The dog has more bark in her! Let he eat!!! Wicked stuff lads keep it coming!!!

@MattBerrymotorsport

4 ай бұрын

Thanks! Will do!

Absolutely interstellar stuff boys. You're doing the Lord's work

I never knew that those engines can hold that kinda of power

@drkfaith1884

3 ай бұрын

What engine is it

@xd_dirkjan

3 ай бұрын

@@drkfaith1884 I think it the 1.3 but completely build I think

@Sr82.

3 ай бұрын

They can't that's a time bomb

just came across this and so glad I did.

giddy up blokes, got 500, 4efte is life

You R the "Horsepower Whisperers"... (I love the way everybody 'stands back' when the fun-pedal is pushed into the down position:) Thanks for the ride along. Cheers from So.Ca.USA 3rd House On the Left.

that smile at 11:50 as he "reckens its got 600hp" was priceless. i can tell you guys are having alot of fun with this project. You aussies sure do like homeland haltech. these dudes (all australian car guys really) are fiercely loyal to their own. im partial to the japanese stuff but if I had a car that could run a haltech...they are as good as any of the best in my opinion.

I love the chaos that is the camp dog.

i love how you guys have a 20 minute conversation with in a few facial expressions and nods

damn that motor move a lot

diagnosed by head nods and or shakes. love it

Nice work lads. Absolutely mental, 4E4EVA

I remember seeing this build a while ago but its defiantly come a long way, love the plates 😉

Sick little car.

Awesome result from the Starjet and you guys. Crazy good!

Holy hell mate that thing is ferocious!!!!!

As soon as I heard the first chord, I knew what was coming. I get premium,and can listen to evry track u played, on tube music.😅

I've said it before and i'll say it again - Ya better weld that motor to the chassis cause it's already about to fly out the bay with 500hp 🤣 600hp probably gonna take the car with it to the moon hahaha

The dogs are back in town 🫡

Incredible stuff boys, smashing it! Camp dog keeps on giving!

Impressive power in that heat

Love it🎉... I doubt the engineers at Toyota ever thought the body would be getting pushed so hard😂

First video that i ever saw from u guys, love it. The way the video is put together and the edit is on point. Keep it up. New sub😎. Hi from Brasil.

doooods, changing rod bearings while the engine is still in the car, now THAT gives me confidence lolol. if an engine can handle that kind of lack of precision then I can stop stressing about the microscopic details.

That Nos bottle makes me happy 😃

So much work. Great 👍👍👌👌

Looks like a little play in that ol turbo there mate!!!! Lol!!! Awesome content bro!!! #GarrettTurbos #FTW

Gonna need lead bars in the front bumper to get 200 of those horses on the road.

My first car was a Starlet. It had a 1 litre engine with 45hp and 4-speed transmission. It was a beast 🙈 Still had a laugh driving it though because you just can't take cars like that seriously 😂

Greetings from the states. 🌊

Love your work boys, keep it coming.

lmao at the bearing replacement. we've all done it!!🤣

@MattBerrymotorsport

4 ай бұрын

You sound like a good bloke

Haha. What a mad sleeper. Love it!

brooooo pocket rocket on the build!!!! nice done Camp Dogs! 🔥🔥🔥🔥

THE DOSE!!! THEEE DOOOOOOOOOOSSSSSE!!!! 🤣🤣🤣🤣🤣🤣🤣

Huge effort blokes !! Massive journey it’s been from the very start to current date 🙌🏻 she’s an absolute weapon for the humble little 4e .. Loved the shoutout to the sponsors makes a huge difference to the content that comes out🤘🏻 Imagine if anyone could donate /sponsor along with merchandise and parts from the store .. be mind blowing to see starjet and evil twin not just at the local events.. Still potential in both Behind the videos you boys put in some solid effort with events and full time work . Absolute massive achievement 💪

@HowToTurbo

4 ай бұрын

Probably be doing some runs of shirts in the near future, more so just because people are asking for them 🙏

Damn lads, that dog gave me goosebumps!

@MattBerrymotorsport

4 ай бұрын

Us too!

Thats gotta be a record eh!

This is insane, you absolute f**king mad lads 😎 I love this build haha! cannot wait to see what you 2 got planned for this thing next lol.

@MattBerrymotorsport

4 ай бұрын

Cheers kapil haha

I lost the lower plastic on my grand am's bumper to a raccoon a few months back and I was worried the radiator/condenser was damaged or something because the 3.4 kept getting randomly hot. Like fine at cruising 60, or 90mph, but would hate city driving or 70-80mph. Got some corrugated plastic sheet from home depot, slapped it on, and my temps are back to normal. proper air flow matters, especially with cars that tend to run hot.

Good work poochies.

Original edit was absolute class, loved the blend of music !! KZread needs to sort out its shitty rules. Thanks for re-posting lads 👍🏽

@MattBerrymotorsport

4 ай бұрын

I know man such a let down!! We will have to be more careful from now on

engine mounts cant contain that bad boy any longer

"what do you do now"?.... Puerto Rico style ... mount it north south.. well done.

How do you make another 18hp? Pgup til it gets there or goes splat 😂😂

🔥🔥🔥🔥🔥 Grandes números marcando campdog, felicidades vayan por más 💪💪💪

Big Ups from down in Melbourne boys! Mental build, so satisfying HAHAHA

Nice job ❤

Nice work lads 🎉! ❤

Play with a more aggressive timing curve and run cooler plugs. That will give gobs of power. Also, route the air intake outside the engine bay, for a bit denser air. Cheers mates, good show on 500+hp.

All you need now is a 2 speed powerglide and a sidchrome spanner as tail shaft ... laughing

F*ckin insane! Great job!

That is awesome 👌

This thing still a 1.3L? Insane!

@MattBerrymotorsport

4 ай бұрын

Sure is !

Go the Doggies 🤣

that thing is _bonkers!_

Love it!!

Made me subscribe 😂well done boys looks minty asf ❤😮

98 C oil temp is barely operating temps. Mine sit around 110 C highway and it doesnt worry me a bit.

I'm waiting for that epic moment to watch it run 🙏 I'm sure it will be epic too mates 🙏❤️

What a weapon 😎😎

So proud of my kin, we’re always pushing the envelope and gifting the human race new technology! Imagine what the planet Earth would look like without us?

Sick!

Be careful that your motor doesn't twist out of bay and take off to nxt state on its own...

That engine is about to fly out LMAO

Nice lads!! 🔥

6:50 Nice big end rattle already....

See about using a planetary gearset as a cvt. If you have the motor powering the ring gear, and the center gear going to the tires, you just have to restrict the orbital gears to transfer power to the wheels. And end gear can be 6 to 1 or more, though you may never hit that ratio.

You can tell that the engine wants to leave the engine bay

same sound made my turbo at 7:04 while pulling and now turbo must be f2cked up cause now sounds like whispering and doesnt holds psi

Add some water/meth injection get your timming back and cool your Donka m8

Didnt i fucking give you a turbo big enough to make 900psi FFS?!

Where did you guys get the clear timing cover from ? Awesome vid !

@MattBerrymotorsport

4 ай бұрын

found it on Fb a few years ago

Fantastic.

That was fucking awesome. you guys rock

Lil hand grenade lol

That's epic

Sick video! What auto box are you running?

Fuckin epic boys!

man I would love to do this to my beat up 2012 fiat 500 NON abarth lolol. that little 1.4l would melt away into sadness. the transmission certainly would as its only rated for like 20 hp over stock (101hp)

Which belt does the 5E-FE use for the water pump and alternator? Is it 99364-20890 or 99364-20920 (890mm and 920mm respectively)?

AWESOME!

Hello matt i got a 97 tercel 2dr 3spd AT ugh i wanna go turbo with somethings like td04L but i can't find anythings online to correctly mod this things how did u do ur 5e-fte conversion????

Honda Logo same design

That is wicked

What's going on with the 31 in the background? 😅

Hell yeah 😎

I would have so much fun with that thing.

Why not bolt on 3 oil coolers, increase the oil capacity to 15L and increase the pressure and volume by 80% ? It will only add 40kg to the car demand a fee HP for drive the custom pump 😂