Turning An Inlay Tray Or Platter - Better Yet!
Тәжірибелік нұсқаулар және стиль
www.AsWoodTurns.com
After returning from the Rocky Mountain Woodturning Symposiummm, I turned a inlaid platter or tray, using the lathe for drilling. This was a test. At the symposium, the presenter had used a vacuum chuck to hold the project while drilling on the lathe. But, at that time, I had a thought "why use the lathe - can't the drill press do as well with less hassle?". In addition, I wanted to have the inlay show as part of a curve in the profile.
This design is inspired by a compass pattern. The background is walnut. Inlay pieces are maple, bloodwood, and sycamore. The back is maple veneer and walnut. The 9" platter is finished with wipe-on poly.
A drill press was used for all drilling operations instead of the lathe.
Here's the previous video using the lathe for drilling.
Turning An Inlay Tray or Platter Without Vacuum Chuck
• Turning An Inlay Tray ...
What do you think about the differences in the process? How would you do this inlay?
Enjoy.
p.s. If you would like a more in depth demonstration than my weekly videos, please contact me for an IRD (Zoom Demo) on this or other topics.
Blog: www.AsWoodTurns.com
FB: / aswoodturns
InstaGram: www.Instgram.com/as_wood_turns
Etsy: www.etsy.com/shop/AsWoodTurns...
Pinterest / aswoodturns
#tray #platter #inlay #woodturning #woodworking #wood-turning-projects #lathe #AlanStratton #video #DIY #Utah
Пікірлер: 22
I was napping and when I woke up I saw spots before my eyes. 🤩 But they went away when you started shaping the platter. Yes, the drill press with forstner bits. Maybe hole saws for the spots. Looks good to me. Thank you for sharing Alan. Have a great day. We'll both keep ouf face shields on. Hope everyone else does too.🙂🙂
@AsWoodTurns
3 ай бұрын
More alternatives. Alan
Alan, I've been a subscriber for some time and enjoy watching your video's that demonstrate your creativity. I have turned a number of inlaid bowls with varying patterns. I use a CNC to cut pockets on the bottom of bowl and to make the inserts. The inserts fit tightly with no gaps so I use wood glue. Some of the members of my woodturning club say that is cheating, but the results are nice. After the glue dries I flatten the bottom with the CNC then using hot melt glue fasten a sacrificial block to the bottom and turn the inside of the bowl, until the inlays are exposed. The pockets and inlays are about 1/2" deep.
@AsWoodTurns
3 ай бұрын
A new frontier. Got to get mine working. Alan
Thanks, Alan!
@AsWoodTurns
3 ай бұрын
You are welcome, Lewis Alan
Nice looking project Alan, thanks for sharing. Take care my friend Cheers Harold
@AsWoodTurns
3 ай бұрын
You bet
Nice looking piece, Alan! I like that.
@AsWoodTurns
3 ай бұрын
Thank you kindly
Excellent work! The only thing I might change is to drill the center hole in the walnut inlay using the lathe. Quicker and easier than redrawing the lines.
@AsWoodTurns
3 ай бұрын
Thanks for sharing your idea Alan
Neat platter Alan.
@AsWoodTurns
3 ай бұрын
Thank you Jack Alan
Another nice video. Thanks. The OneWay Drill wizard or a similar homemade device and the lathe index feature provides endless variety of drilling options. I've used it often. Because it is easy to drill a hole at an angle other than 90 degrees to the board surface, the resulting turning is an oval, ellipse, etc. These interspersed with circles makes for an interesting appearance. And yes, I wear my face shield and respirator! Keep reminding people.
@AsWoodTurns
3 ай бұрын
Thanks for the ideas Alan
How cool is that !
@AsWoodTurns
3 ай бұрын
Thank you Alan
Nice piece, Alan. The easiest way for me is to let you do the work lol. Bill
@AsWoodTurns
3 ай бұрын
Deal!
Very nice. Face shield goes on every time the lathe is used. Safety First.
@AsWoodTurns
3 ай бұрын
Good Job! Alan