TurnCycle Centre Stand Disc | DEMONSTRATION

Turncycle.ca
Turncycle Centre Stand Disc | Demonstration
Make sure the area is level and free from objects that may interfere with the turning of the motorcycle on the disc.
Move your motorcycle into parking position, set the side stand. Place a leveling mat included in the kit ahead of the front and rear tires. Then place the Turncycle Centre Stand Disc ahead of the rear mat.
Roll the motorcycle onto the mats and stop before the end of the leveling mats. Lower the centre stand and place pads of the stand in the visual marking boxes on the anti-slip cover on the disc.
With a firm hold on the motorcycle lift the motorcycle onto the disc, making sure the motorcycle is centered on the disc. If not, remove the motorcycle from the disc and reposition.
Make sure the motorcycle is stable prior to rotating. To move, gently push down on the rear of the motorcycle to raise the front tire, then turn the motorcycle on the disc.
The motorcycle can be left on the Turncycle Centre Stand Disc until you're ready to ride again. However, you must remove the disc and the leveling mats after you lower the motorcycle off the stand.
Do not drive over the disc.

Пікірлер: 32

  • @robertbaetz3493
    @robertbaetz34939 жыл бұрын

    Dave, you can spin the bike around in any flat level surface, doesn't have to be in a garage. Works great on an asphalt driveway too. If you set up the rubber mats ahead of time, you can save some time setting up the disc. You only need the shortest length of the motorcycle, to spin it. You're not spinning it 360°, just 180°. This is way faster and safer than trying to do the 7 or 8 point turn to turn the motorcycle around.

  • @benparmer1612
    @benparmer16127 жыл бұрын

    What a great idea. I am looking for something like this !!

  • @RetiredAtenPilot
    @RetiredAtenPilot7 жыл бұрын

    Great choice of shoes too..... Merrells ROCK !!!

  • @micheal49

    @micheal49

    3 жыл бұрын

    Love my Merrells!

  • @almeidadave1
    @almeidadave19 жыл бұрын

    Looks cool, but think it would be alot more particle and quicker to just back up the motorcycle- plus you need a hell of alot of room just to turn it around

  • @bobgc1954

    @bobgc1954

    8 жыл бұрын

    I have a 600ilb motorcycle, 72" long, driveway to my garage is uphill. Garage width 9ft 6", I can either ride into garage then do a 4 to 5 point turn or I can use the turntable less space required to turn the motorcycle plus far less effort. Which way do I choose, I choose the turntable - others may differ.

  • @irishRocker1

    @irishRocker1

    2 жыл бұрын

    @@bobgc1954 Why cant you just reverse it out using the front brake to control the speed?

  • @steveo726

    @steveo726

    Жыл бұрын

    @@bobgc1954 same here I like your idea

  • @bobgc1954

    @bobgc1954

    Жыл бұрын

    @@irishRocker1 no reverse on fjr 1300

  • @YouMotorcycle
    @YouMotorcycle5 жыл бұрын

    why not just turn it on the sidestand?

  • @opmike343

    @opmike343

    3 жыл бұрын

    There's certain flooring surfaces that make this either really hard or will damage the floor.

  • @45eno
    @45eno2 жыл бұрын

    My NC700X on Honda center stand easily spins on the smooth cement garage floor. Nothing extra needed.

  • @robertbaetz3493

    @robertbaetz3493

    2 жыл бұрын

    That’s good if you can do that, but if you had a heavier motorcycle, you are not going to be able to do that as easily. Along with the fact of side loading your center stand.

  • @StuartGeers
    @StuartGeers9 жыл бұрын

    I was excited thinking it was a big mat the whole motorcycle turned on so backing out of garage was no longer a thing. Not just the very few models with centre stands temporarily used : (

  • @turncycletv4417

    @turncycletv4417

    9 жыл бұрын

    Stuart Geers Just wait till the fall, I will hopefully be introducing a new model that will work on all motorcycles.Go to www.turncycle.ca or on our Facebook page and like us! Stay up to date on the new model!

  • @Ladosligese
    @Ladosligese2 жыл бұрын

    so a simple lazy susan with a metal plate on it .. got it -.- ..

  • @dalemasyk1583
    @dalemasyk15834 жыл бұрын

    lolol soooo many out there ....what so speicel about yours...ohh your ads name hehehe

  • @bryanmedway3022
    @bryanmedway30223 жыл бұрын

    I allready have the disc please can you tell me where to get the mtas from please this would help me to position the disc I thank you in advance

  • @robertbaetz3493

    @robertbaetz3493

    3 жыл бұрын

    Go to www.turncycle.ca and order the mats. Depending on what size and weight of your motorcycle you can order either the standard or heavy duty mats.

  • @bryanmedway3022

    @bryanmedway3022

    3 жыл бұрын

    Thank you very much Robert@@robertbaetz3493

  • @rayfriedman6107

    @rayfriedman6107

    10 ай бұрын

    Hopefully by now you've figured out that a couple pieces of scrap lumber will do the trick.

  • @adrianzamora1426
    @adrianzamora14266 жыл бұрын

    Is this sold at Amazon?

  • @robertbaetz3493

    @robertbaetz3493

    6 жыл бұрын

    Adrian Zamora no it is not sold on Amazon at this time. However you can get one from Turncycle-US.com or Aerostich.com

  • @turncycletv4417

    @turncycletv4417

    6 жыл бұрын

    Sorry at the present time it isn't sold on Amazon, you can check out my dealer page or Aerostich.com or Turncycle-US.com to purchase.

  • @myfev3228
    @myfev32286 жыл бұрын

    I want it badly

  • @robertbaetz3493

    @robertbaetz3493

    6 жыл бұрын

    my Fev Order it through Turncycle-US.com or Turncycle.ca and we would be more than happy to get you one!

  • @myfev3228

    @myfev3228

    6 жыл бұрын

    How cen i buy this i am from india

  • @turncycletv4417

    @turncycletv4417

    6 жыл бұрын

    Go to www.turncycle.ca and order one through the website.

  • @feresearchit5473
    @feresearchit54733 жыл бұрын

    or you just turn it on the side stand......

  • @napper1496
    @napper14963 жыл бұрын

    Wonder how many poor buggers will make a mess of their bikes using this lol

  • @rayfriedman6107
    @rayfriedman610710 ай бұрын

    I alway enjoy being spoken to as though I was a 6 year old--or a moron. Likely a good product, just needs a more HUMAN presenter.