Turn a Turntable or Lazy Susan
Тәжірибелік нұсқаулар және стиль
I make some turntables for my kitchen on the lathe using some easily found lazy susan hardware. Keep watching as I have a few tricks that might be useful even if you do not turn one of these!
As an Amazon Associate I earn from qualifying purchases from my Amazon shop www.amazon.com/shop/mikepeace...
Lazy Susan hardware I used amzn.to/2Z2svCy
HSS bar to make a scraper amzn.to/3gRhcDb
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacewoodturning.com/
Пікірлер: 36
If you find my videos helpful, you can buy me a virtual cup of coffee with this link. www.buymeacoffee.com/mikepeace3Y
Good tip on drawing 2 pencil lines to cut between when using the bandsaw. 👍
@MikePeaceWoodturning
3 жыл бұрын
Glad it was helpful!
Great video Mike bet you wife will appreciate them .. Stay safe 😀
@MikePeaceWoodturning
3 жыл бұрын
Thank you, I will
Amazing work, Mike!!! 😃 Thanks for sharing all the knowledge! Stay safe there with your family! 🖖😊
@MikePeaceWoodturning
3 жыл бұрын
Thank you! You too.
Nice little project Mike!👍👍👍👍👍👍👍👍👍
@MikePeaceWoodturning
3 жыл бұрын
Probably not the most exciting but definitely functional. My wife loves the 3 I made her and is asking for more.
@alanmullock381
3 жыл бұрын
@@MikePeaceWoodturning You do something nice for "'er indoors😁" and your suddenly on a production run!😂😂😂😂👍👍👍👍
@MikePeaceWoodturning
3 жыл бұрын
@Alan Mullock No good deed goes unpunished
Nice project👍. So many spinoffs (no puns intended😬) come to mind💡 so thank for the vid Mike🙏 Stay safe. -Mike😷
@MikePeaceWoodturning
3 жыл бұрын
Yes, lots of options.
Nice job. Does my heart good to see you folks with channels and thousands of dollars of equipment screw up once in a while!
@MikePeaceWoodturning
3 жыл бұрын
You only see it once in a while because I do edit my videos, LOL!
I liked the vacuum chuck. Good idea. Thanks
@MikePeaceWoodturning
3 жыл бұрын
I have an unpublished article on it on my website that might be helpful.
Good idea. Thanks
Nice job, Mike.
@MikePeaceWoodturning
3 жыл бұрын
I appreciate it, George.
Good idea. My wife was wanting one for an outdoor table where we grill. I think my only change in this project is to glue cork or rubber on the bottom swivel plate so it doesn't scratch the table.
@MikePeaceWoodturning
3 жыл бұрын
I agree if you use on a table it definitely needs a base or paddnig. Cork sounds good.
Good job 👏🏻👏🏻👏🏻👏🏻
@MikePeaceWoodturning
3 жыл бұрын
Thanks!
Great idea, Mike! I hope my wife doesn’t see this. She already has a huge honey-do list. Let’s not add to it, okay! 😃😃😃😃
@MikePeaceWoodturning
3 жыл бұрын
I hear ya, Gord.
@GordonRock1
3 жыл бұрын
10 Dr Ken Harper - Oh oh! You’re not going to tell on me, are you, Ken?? 😳😳😳 😁😁😁
"Artillery round off." Years since I heard that expression. (13-E AIT, 1977)
@MikePeaceWoodturning
3 жыл бұрын
Commanchee County College for Confused Canon Cockers OBC 1969
Hi Mike, would you please explain how your vacuum chuck works? Thanks.
@MikePeaceWoodturning
3 жыл бұрын
Let me know if this does not do it. kzread.info/dash/bejne/dHmes6maps-2gbg.html I do not mean to sound snarky but do you think it would be helpful to explain how to do a keyword search on my channel to see if I have a video covering a topic? You are not the first person to suggest a video topic on something I have done a video on in the past. It is not clear to me how much of the issue is "can't do versus won't do".
looks great mike . you know i dont have a solution to a project but i do have a question maybe you could answer or do a video to explain or maybe you already have one . i turn alot of boxes well i say alot but really i turn one every few weeks or so . and i have a issue keeping the lid true . like when i chuck it up and turn it its fine and true when its done and i turn the lid it does not stay true . only one side of it is like i turned it off center . one way its true turn the lid 180 degrees and its all out of line . can ya help me mike it drives me crazy .
@MikePeaceWoodturning
3 жыл бұрын
Sounds like your work is getting out of round during your process. Wood not dry or a chucking issue, sounds like.
@diydarkmatter
3 жыл бұрын
@@MikePeaceWoodturning ok thank you mike .
Mike, How did you screw it to the cabinet?
@MikePeaceWoodturning
3 жыл бұрын
It just sits on some shelf liner. Seems pretty stable.