I just bought a core gen 2 coyote from a 2015 GT from my work. It has rod knock but that doesn’t matter cause I was gonna build it up anyways haha. Next, just need to find a SN95 to drop it into. Tons of clapped out SN95’s where I live. Will be a budget build for sure. But, im looking forward to it.

Props to a guy that keeps SN95s separate from New Edges. Aside that, very clean set up for road AND race.

@collintansey9508

Жыл бұрын

New edges are SN95s lol

@stephenrogers5593

Жыл бұрын

@@collintansey9508 I think he just meant with the rear axle. I had an 03 cobra a few years back and went to solid axle out of a 98 mustang cobra and the it was shorter than the 99-04 rear end.

@demetriuspalmer2992

Жыл бұрын

​@@stephenrogers5593Yeah you're right about that, the way this guy in the video was saying it though was making it seem like the Sn95 and the New Edge were 2 different generations even though it's still an SN95 lmfao. I get some people don't like the styling of the 94-98 Gt but quit making it seem like the New Edge isn't still the same Sn95 platform

I bought a 99 gt and I went with a vertech supercharger with long tube headers ,h-pipe,373 gears,I changed the pulley on the supercharger so I had to get bigger fuel pump and injectors,I added some gauges like boost gauge,air fuel ratio gauge,a little suspension work I had subframe connectors,upper and lower control arms,strut tower brace,center force duel friction clutch,short throw shifter became I power shift when racing and they have the stops so you can't bend the shift forks no matter how hard you pull on the shifter and I never missed a gear when you learn,trick flow heads,ford intake. I'm sure I'm forgetting shit but it was a beast. I had 295 nitro drag radials and would still spin like it was in rain

Great video Ford power forever baby Chevy killer

Very nice!

That thing looks like my mustang new edge in the #nolimitdragracing game Sick 🐎🇺🇸💪👊🙌

The New Edge Mustang is technically an Sn95 they just called it "New Edge" due to the body lines and sharp edges and other body style things.

What does it weigh? Any idea of the first gear ratio?

Great video man! Wish you and your dad were doing spring sterner n Yeet. Keep up the good content

@HotRodHeavenUSA

Жыл бұрын

Thank you! We wish we could have been there too. I'll be leaving on tour for 3 months so had to film some more videos ahead of time so I could keep posting on the channel!

@yfzjim

Жыл бұрын

That car looks perfect! Did I hear that right? 10” wheels with 6.5 backspace and stock-width SN95 rear axle? I need my street car to look like that. Thanks!

That thing gots a 30 horse power fuel pump lol nice ride

Could you please try to do a video on a factory five daytona coup not many good bud and would love to see it

@HotRodHeavenUSA

Жыл бұрын

Would love to do one! Just gotta find someone that has it somewhat close to me and who doesn’t mind being on camera haha

Very cool!!!! 👍👍

clean simple just how like em .

Looks like Black Sunshine

I need it

I need a coyote in my s197. So completely stock truck motor running low 8's? That's just nuts.

@koolaide2110

Жыл бұрын

bone stock. even the truck cams. 8.11@170 is the best so far

@Alex-pl1ye

Жыл бұрын

Gen 2+ is the key here

@demetriuspalmer2992

Жыл бұрын

​@koolaide2110 Love the car man I've got plans to get me a New Edge Gt and Coyote swap it and wanna go with Powerglide tranny as well, if you got any preferences for a brand to go with hmu

I wonder why he doesn't put the Mustang GT cams in it instead of the truck cams

@koolaide2110

Жыл бұрын

I'm poor 🤣

@demetriuspalmer2992

Жыл бұрын

​@@koolaide2110Yeah ikr us other Mustang guys know how ya feel 88 Gt Notch here though old school 302

@briankinzer4175

4 ай бұрын

Ford parts are a scam and overpriced and that’s x4 on the cams about 2k lol

Muh ride. It does the job. What job is that, delivering pizzas?

If that rad ever starts to struggle just switch to methanol! lol. Sick new edge

When people refer to the New Edge they say it like it is a whole different generation of Mustang lol. Don't get me wrong but I'm a Mustang Gt guy too and prefer the New Edge but the 94-04 Mustangs are all the same Sn95 Platform

What is the difference between a truck engine and a mustang?

@koolaide2110

Жыл бұрын

On a gen 2 the heads and cams are smaller on the truck engine. The gt engine makes even more power.

@jmendozas197

Жыл бұрын

The 3 main differences are cams, intake manifold, and the compression ratio.

That don’t look like a coyote. Looks like a 32v with a gt350 manifold

@kckemp03

Жыл бұрын

Valve covers definitely look different than a 4v cobra motor. Color might be the same but valve cover design is not

@kckemp03

Жыл бұрын

Also I believe the coyote motor is a 32v as well .

@Sick_ridz

Жыл бұрын

@@kckemp03 32 valve 4.6L is what I meant

@Sick_ridz

Жыл бұрын

@@kckemp03 the valve covers are different from a coyote too. The valve covers are black on the coyote but the plug location looks right

Real power none that puny 5.3 cheap junk.

@petrolhead8851

Жыл бұрын

Fuck ls swapped mustangs! That shit is for people with low I.Q’s

@KobaBlack113

Жыл бұрын

Show me on a doll where the 5.3 hurt you.

@petrolhead8851

Жыл бұрын

@@KobaBlack113 you mad bruh?

@B49nope

Жыл бұрын

​@@KobaBlack113 5.3 are JUNK.

@jerraleproctor

Жыл бұрын

Lol why spend double to make the same power let’s tallllkkkkk about it

Just spill the HP, why keep it a secret if you got a good setup.

@koolaide2110

Жыл бұрын

just never used a dyno. I tune all our stuff on the street and track. never needed a dyno. i'd guess around 1000hp or so

Stopped watching talking about 2vs … 650+ 2v over here

@koolaide2110

Жыл бұрын

We still love the 2valve guys. had one in these car for years.

@petrolhead8851

11 ай бұрын

I love the old 4.6 sohc and dohc engines! Very capable engines but the coyote will always be the better engine if you want good n/a power or boost, the 4.6 dohc and sohc engines can also make big n/a power but you really have to know what you’re doing! It’s not just a let’s slap every bolt on and add high compression with big cams type of shit and make the power you expect! The old 4.6 dohc and sohc engines need a big bore kit, higher compression, bigger cams, and most importantly a real good head porting and a stand a lone ecu to allow you to rev your engine past 7200rpm because these engines rely on high rpm to make big power and stock pcm’s can’t keep up with high rpm’s, I would also highly recommend balancing the rotating assembly because of the high rpm’s, im sure you might have known all of that already but some people don’t know what’s up with the 4.6 when trying to make big n/a power

so got to give it to ya bro, not a big fan of the sn95 platform..... but but but.... lol, this is a clean AF example of the sn95 platform. 👍👍👍 ok I admit this car is badass!!!!

@kendallcollins3179

Жыл бұрын

It’s actually a New Edge. Not a SN95.

@floydmanning136

Жыл бұрын

@@kendallcollins3179 your wrong! Sn95 are from 94-2004. Please do your research before commenting!

@kendallcollins3179

Жыл бұрын

Look up what years are called New Edge and you will see that it’s from 1999-2004. New Edge and SN95 are different body styles.

@badassbrian11

Жыл бұрын

LOL I actually don't know. i thought sn95 platforms were from like 93-04 or something like that. it's funny cuz all my years of going to car shows and all my friends that have foxbodys, sn95 stangs and on, no one has ever said that term or said body style 🤔🤔🤔.

@badassbrian11

Жыл бұрын

@@floydmanning136 thank you for clarifying 👍👍👍

Too much damn talking