How Much Power will a Coyote Swapped New Edge Mustang Make? ML Tune
Автокөліктер мен көлік құралдары
ML Tuning: mustanglifestyle.net/collecti...
ML Key Tags: mustanglifestyle.net/collecti...
Discount Codes:
MUSTANGLIFESTYLE 10% Off at freedompartsoutlet.com
MUSTANGLIFESTYLE 5% Off at steeda.com
ML7: 7% Off at bmrsuspension.com
MLSLTH: 10% Off at longtubeheaders.com
MustangLifestyle 6% Off at lethalperformance.com
Mustanglife11: 10% Off at boostane.com
MustangLife: 6% Off at www.jlttruecoldair.com
MUSTANGLIFESTYLE: 10% Off at sctflash.com
Equipment Used:
Canon 80D Video Creator Kit: amzn.to/34QsRNI
Canon G7X Mark II: amzn.to/2O56L4r
GoPro Hero 7: amzn.to/2O3TI39
Macbook Pro 15" Retina 1TB SSD 16GB Ram 4GB GPU: amzn.to/2O5Do1C
Mustang Lifestyle Decals Now Available! mustanglifestyle.net
Like us on Facebook: / mustanglifestyle
Follow us on Instagram: / mustang_lifestyle
Follow us on Twitter: / mustanglifetv
Follow the Team:
Andrew: @MrAjsTech / mrajstech
Ash: @Ash_Carlton / ash_carlton
Пікірлер: 77
Glad you were able to get his car dialed in. Now me and him gotta line it up and see if this old 2V can keep hang with the Coyote
@stephenthurmond3574
10 ай бұрын
My buddy sold this car to the guy that ownes it now. I ran it with my boosted/ cammed 2v and it was a damn good race side by side.
@904Saleen
10 ай бұрын
@@stephenthurmond3574 well that’s good to know I have a shot. The cars being well taken care of. I know he’s planning to get the exhaust redone on it next along with 3.73 gears
Love these tuning vids
These motors sound wicked on those super high pulls. Love it
Really like the tuning videos 👍
Awsome stuff!!
Dope! I need to go ahead and coyote swap my 03 GT!
Them 8k rpm runs tho 👌🏼 😮💨
ayo those badges on the trunk gotta go lmao
@jordancourse5102
10 ай бұрын
Yea he should get it shaved off.
@3shitmike367
10 ай бұрын
How much would y’all charge for a coyote swap
That GT500 is crazy
God damn it now I have to swap my new edge...
Really cool car, sweet setup, plus she is a screamer. Great numbers for Gen1 Coyote NA, really love the setup in this car, love these New Edges that have some kick in the butt power!
@midnight347
10 ай бұрын
It has boss cams so it's not really like a gen 1 per se that's prob why the numbers are little better
@killa_k2
4 ай бұрын
im about to build one
Beautiful car
Hey Andrew . I'm doing a crown vic swap in my wife's 04 gt , but we love the videos .keep them coming. How is the baby,an Ashley? Thanks brother...👊🏽
It's amazing how automatic the numbers are for these motors with a given combo. Zero guess work.
Greate man! how they made the cluster connection to the coyote swap?
Wow, I bet that car will go 11.5 the way it sits..cool video
Yeah ive shifted my Mach1 from 4th to 5th at 150 at redline (in Mexico 👀)
New I really want to get a Coyote in my 04 Sonic Blue New Edge XD, I use mine for Auto X
What’s the best way to tell if your Gen 1 is a truck or mustang motor?
What’s your transmission set up? Sounds good, awesome swap.
Do you know where car originally came from after the swap? Just curious. Awesome video.
More fuel more power. That is not a surprise LOL
What kinda wheels are those?
421, man that's not bad for the first pull. I'd like to have Andrew tune my 2019 procharged Mustang but I'd like to take it to him, only thing is I live so far, I'm in West Virginia 😢😢
@MustangLifestyleTV
10 ай бұрын
I can tune it remote too
@cobra-svt2004
10 ай бұрын
@@MustangLifestyleTVyou could tunnel a mustang cobra 03 it only has a whipple 2.9 second generation and a level 1 cam and return system
If you weren’t so far away I’d have you work on my 14 5.0 Gt manual car I inherited from my Father recently. I’m in Pa 😢.
Spicy....
Is it real loud
Do you plan on getting into tuning some of the older stuff in the future? I have a 03 Cobra that I'd like to Whipple soon and I'll be looking for someone to remote tune it.
@MustangLifestyleTV
10 ай бұрын
I have tuned a ton of EEC V cars already. The problem with remote is most people don't want to spend the time to get me proper wideband data. So in the future when I have a dyno I'm sure I'll tune a lot of 99-04 GT Cobra in person.
Is that a Massachusetts car?
What kind of wheels are those? They look sick on the new edge !
@2slow2v
7 ай бұрын
aodhan ds08
Where is your shop located?
Are you remote tuning boosted 4.6 2 valves?
@MustangLifestyleTV
29 күн бұрын
Yes
Need to change gear ratio to see an improvement on horsepower .
Would gen 3 heads work on gen 1 block?
@midnight347
5 ай бұрын
No just get gen 2 heads they're just about as good
What kind of dyno are you looking at getting into?
@MustangLifestyleTV
10 ай бұрын
Dyno jet
Hey Andrew quick question what mods do you recommend for a stock 99 mustang gt
@MustangLifestyleTV
10 ай бұрын
Wheels, lowering, and exhaust is a good place to start
@josesaldana703
10 ай бұрын
@@MustangLifestyleTV i have borla s type catbaack on stock cats and h pipe. do you recommend x pipe over h? Is an open element air intake better(like jlt or k&n) or stock air box good enough? Thank you so much for replying as any advice I’d appreciated
@904Saleen
10 ай бұрын
@@josesaldana703X pipe will make more peak power but H pipe will make more torque. Sound is also different X is more raspy and aggressive and H is more smooth. Really comes down to preference of sound because performance is negligible. A good quality open air intake like a JLT or similar style would be just fine as well
@josesaldana703
10 ай бұрын
@@904Saleen thank you so much for helping me out as well, im currently looking at a jlt gen fender air intake? Or is the one in the engine bay better? would you recommend shorty headers at all? Since I’m in cali? Thank you much once again, Btw love your saleen how much psi is that bad boy pushing if you still have it? Haven’t seen a video upland in 1 month hope as is well
@904Saleen
10 ай бұрын
@@josesaldana703 fender well will take in cooler air, but at the risk of waster getting in. If you don’t have fender liners that are in good shape, there’s a change it could get soaked. I have mine for my car just in the bay and it seems to do ok. And I have a hEaton blower that’s just making that air even hotter. Really the more straight your air can be fed in, the better. Shorty headers are kind of a waste. No real power gains from that. A lot of headache for not much gain if any. For a bolt on 2v I wouldn’t. I run stock manifolds on my car still. Also thanks! It runs about 11psi at peak which is 6k rpm. It makes about 380whp on 93 octane. It’s about to go on E85 which will be a future video. Actually will be doing it at Andrew’s shop. He’s the one who helped me piece the return system together. Just been a lot going on and nothing really worth filming and uploading, and I don’t really like making filler content. I did in the off time get some quality of life things working like the AC which was a whole deal with the MS3 guys to get working right. Luckily was just tune issue. I should have more coming on it soon, and you’ll probably see it pop up here on this channel too here soon!
How much power does the Lambo make?
A coyote with cams, headers, cold air, and intake only does 425 ? I thought they were doing 500 with jus e85, cold air, and headers ?
@MustangLifestyleTV
10 ай бұрын
You’re thinking of Gen 3. This is a Gen 1 truck engine
@midnight347
5 ай бұрын
Like he said it's a gen 1 truck motor so 10.5:1 compression vs 12:1 like the gen 3 you're talking about. Also it has boss cams which is like gen 2 coyote cams they're better than truck cams but the same as a gen 2 coyote cam stock. Also most intake header e85 gen 3 don't make 500 wheel alot of them are under 500 they do 480-490 and people call it 500. Not all the time I'm just saying it's not super common to be above 500 wheel even with a gen 3 with the mods you're talking about.
Is the 3650 built and will it handle 7000RPM shifts?
@MustangLifestyleTV
10 ай бұрын
It is stock. They don’t typically explode north of 7000rpm in a single gear. It’s aggressive shifting at high rpm that might have lock out or damage gears/synchros
@TheJMan1K
10 ай бұрын
@@MustangLifestyleTV built 3650 or Magnum swap? Looking to perform a similar swap?
@MustangLifestyleTV
10 ай бұрын
@@TheJMan1K magnum no question
What’s the exhaust set up?
@MustangLifestyleTV
10 ай бұрын
loud
@MustangLifestyleTV
10 ай бұрын
Pretty sure its BBK headers to X to no mufflers
Frankenstein
That thing needs some 456 gears. 180 in 4th is ridiculous and uneeded. I bet it could pull 150 in 4th with 456 gear with a 28 inch tire.
Replace the COBRA letters in the bumper, put COYOTE there n i bet you ppl will respect it more..
A coyote will bolt right up to a new edge motor mounts and trans right
@midnight347
5 ай бұрын
Yea it is a super easy swap in any mod motor equipped vehicle...you can use stock brake booster etc.
Cobra rear bumper and a Cobra grill emblem on a GT? 🤣😂 Just be happy with your Coyote swapped GT, that's a terrible Fobra.
@midnight347
10 ай бұрын
Agreed. Some people have the logic of "since my car is now faster than a stock cobra I have the right to run cobra badging" but I don't agree with that if it ain't a cobra it ain't a cobra. Even if you had a cobra driveline it still not a cobra lol
When we gone see turdzilla again OG and predator blower 👀 da og street cars👀 whatever happened to whipple s550
@MustangLifestyleTV
10 ай бұрын
Turdzilla in OH, OG waiting for paint, cobra is just about ready to make a comeback with the new engine and ported blower. White whipple car was a giveaway car which we miss a lot
@jeremymoore1805
10 ай бұрын
@@MustangLifestyleTV I was wonder had you talk to the winner of the s550 and how he and the car was doing and would you consider doing a another raffle giveaway
The cobra on the bumper and cobra grill badge gotta go it might have a coyote but its still not a cobra. Rear bumper smoothed would be better imo and tri bar pony in the grill which is a similar look. Fake snakes arent cool lol