Turbo WS6 Trans Am FULL Setup Reveal!
Автокөліктер мен көлік құралдары
On this turbo WS6 episode, Vasko Speed and Autofaze reveal the current setup on the Trans Am WS6!! A small overview of the cars complete current setup! Holding nothing back and showing all the custom Vasko work that was done. I forgot to talk about the cam swap in the vid, we switched to a turbo cam. Ill do a idle chop video comparison of before and after for the next Ws6 vid! After the setup reveal we take the turbo Trans Am WS6 over for a street tune at Kc Maxx Performance! Time to get some road miles and start enjoying it! At the end our friend Kent from Wilson Garage helps us out! Check out his channel here: / @wilsongarage9888
Maven mount: amzn.to/3oujC1R
Intake kit: amzn.to/3EHMuJm
Fans: amzn.to/3GibxTU
Radiator: amzn.to/3dxha45
Fan relay kit: www.racetronix.biz/p/dual-ser...
Fuel Pump: amzn.to/3xYV6J8
An line: amzn.to/31BBsH4
The start up vid and tune is filmed with my phone but the rest is with our trusty Sony a7III.
Become friends with us on Instagram: / autofaze
/ vaskospeed
www.instgram.com/kcmaxxperfor...
GEAR USED IN MOST OF THIS VIDEO:
Camera: amzn.to/3qFM3aJ
Favorite lens: amzn.to/3ezA7VA
Gimbal: amzn.to/3cqFUKF
Help support the channel by using the links above! As an Amazon Associate we earn from qualifying purchases , this helps us with expenses to make rad videos
Пікірлер: 103
Such an awesome clean build man. Love the wheels on it and everything about the car. Great vid keep up the good content
@Autofaze
2 жыл бұрын
Thanks for watching! We got a few things still in store for it 😉
the amount of work put into the build is amazing everything is perfect awesome hope my 1998 trans am ws6 white also is this clean one day.
@Autofaze
2 жыл бұрын
Appreciate the love Austin, thank you so much for watching! Comments like this make all those late nights worth it man.
Congrats man Great setup and looking forward for more.
@Autofaze
2 жыл бұрын
Thanks for watching! Hoping to get a few more good weekends before the weather turns on us in the Midwest.
Gorgeous Trans Am
@Autofaze
2 жыл бұрын
Aye! Appreciate that, thank you for checking out the video!
Very Clean Trans Am !!
@Autofaze
2 жыл бұрын
Appreciate the compliment! Thank you for watching
We need to see some track videos!! Awesome built man keep the videos coming!!💪
@Autofaze
2 жыл бұрын
Next year for sure! Thanks for watching ♥️
I love this build
@Autofaze
2 жыл бұрын
Appreciate that more than you realize! Thanks for watching ♥️
Awesome build man Love it, perfect set-up
@Autofaze
Ай бұрын
Thank you so much! Appreciate you watching, I haven't made much videos recently about it. Should I keep making more?
@CB80681
Ай бұрын
@@Autofaze for sure man. I have a 2013 ZL1. Still all stock, but got her paid off now so hopefully I can start doing something to it. I also have a 1982 Indianapolis 500 Camaro that I tried to give as a down payment for a black 1998 WS-6 with polished wheels. Unfortunately someone beat me to the punch. I still have it, but engine is locked up. 😅 🤭 But definitely keep the videos up. Love the ride, and the energy. 👍🏾
@Autofaze
Ай бұрын
@CB80681 very cool! Time for some mods 😎. I'd advise staying away from the 98s. They use a different ecu than the 99+ and tuning them can be tricky. Last year or the metal fuel tanks too fyi
Beautiful build
@Autofaze
Жыл бұрын
Appreciate the love! Thanka for watching
Beautiful ride!! I've got the car and wheels so far. Now I gotta get tires and turbo then I'll have a sweet ride like yours. Love that you kept it super clean. Kudos
@Autofaze
Жыл бұрын
Appreciate you watching Kevin! What color is yours?
@kevincrawford6936
Жыл бұрын
Black. Front wheels are 18x9.5 +50 and rear are 18x10. +30. I'm putting 285/35/18 front and 315/3518 rear. Crossing my fingers hoping it'll all fit
@Autofaze
Жыл бұрын
@@kevincrawford6936 I always forget what tires we run. We made a wheel spec and tire video! That rear tire should fit no problem!!
@Autofaze
Жыл бұрын
@@kevincrawford6936 black and white 4th gens are my favorite! We have had 5 black 4th gens and 2 white ones lol
Car is a beauty. Big fan of the WS6
@Autofaze
2 жыл бұрын
Appreciate the love! Been a big ws6 fan since they came out 20+ years ago
Cool dude👌 nice ride💯🏁
@Autofaze
Жыл бұрын
Appreciate the love, thanks for watching!!
Good stuff
@Autofaze
2 жыл бұрын
Aye! Thanks for watching!
Wilson garage in the house 🏠. Love the ws6 build!!! Super clean car. Always happy to help fellow car enthusiasts. (What is wrong with my arms) 🤦♂️🤦♂️
@Autofaze
2 жыл бұрын
Aye! Thanks man. I never even paid attention to your arms 🤣🤣! When are we seeing some turbo mustang updates??
@wilsongarage9888
2 жыл бұрын
@@Autofaze soon very soon. Winter mods are in the works.
@Autofaze
2 жыл бұрын
@@wilsongarage9888 oh snaps!!
WOOOOOOOOO!!!!!!
@Autofaze
2 жыл бұрын
Ayeeeeee!! Thanks for watching man!
Super clean car...I love the wheel setup...I originally wanted those for my '99 2 valve GT,but everywhere i looked said they wouldnt fit....🤷♂️...Hopefully we can see some dyno pulls next....
@Autofaze
2 жыл бұрын
They dont makes these for a 99 Mustang? That's shocking. Thanks for watching!
This is my dream build
@Autofaze
Жыл бұрын
Appreciate the kind words Juan! thanks for watching!
Damn, VERY nice clean build! SOOOOO... when can I drop my WS6 off so you guys can build mine? I wanna keep my A/C, though. 😄
@Autofaze
2 жыл бұрын
Keeping a/c can be arranged 😉! Thanks for the love and for watching Carlos! Always dug your ride too
ooo dang weld rts....sheeedawg
@Autofaze
Жыл бұрын
ohhhhh yeeeaaa really sets the car off. Thanks for watching!!
Man this was worth watching! How long do you figure the engine bay wire tuck took you?
@Autofaze
2 жыл бұрын
Hey Derek! Hard to say as we did other things in between. A fella could definitely knock it out in a few hours without rushing.
Siiiiicccccckkkkkkk!!!!!👍
@Autofaze
2 жыл бұрын
Ayeeeeee!!! Thanks for checking it out
Nice built very clean , When you installed the fans did you leave as push or pull ?
@Autofaze
Жыл бұрын
They push since they are in front of the fans! Thanks gor watching!
wow!!!!! it's been a while since I've seen your channel! you car is awesome!!!!: what is you hp now?? awesome job!!!!!!
@Autofaze
11 ай бұрын
Thanks for checking is back out! Low boost safe tune low 500s. Going back to turn it up soon! Tha ks for watching
We're y'all able to keep front sway bar and AC? Very nice build
@Autofaze
2 жыл бұрын
Hey Sableweld! Thanks for watching. We do a lot of drag racing so the front sway bar isnt on the car. We removed the ac to clean up the bay, we never really used it anyway. Vasko Speed can build custom turbo kits keeping the ac if needed.
Torque arm noise ? What was the fix for that ? Bad ass build ! Vasko for the win !
@Autofaze
2 жыл бұрын
Not sure. Everything looked fine when we got back home and everything is tight. In 500 miles it hasnt happened again. Chalking it up to typical fbody groans 🤣
What blow off valve did you use? Sounds nice and looks even better!
@Autofaze
2 жыл бұрын
Jgs! Appreciate that, thanks for watching!
Did you stay with the ls1 motor, what upgraded internals did you go with if anything, what cam and also what size wheel and tires? Nice car btw
@Autofaze
2 жыл бұрын
Stock ls1. Different cam, springs and trunnion kit. 18 wheels. Thanks for watching!
Must have been a fortune!
@Autofaze
2 жыл бұрын
Can't take it with you!
Where does your exhaust run out? My pipe is under the front bumper, and hangs low. Any help would be great. Thought about going out the front bumper, but that means it'd go through the side marker light. Thanks for any help.
@Autofaze
Ай бұрын
Video shows it :) it is full 4inch exhaust out the back!
i had a 99 and a 2001, fun cars but rear ends were junk amongst other minor things but fun cars
@genericallyaccepted
2 жыл бұрын
How can you tell the rear ends were junk? Can you upgrade it? Probably from a Corvette?
@Autofaze
2 жыл бұрын
The factory 10 bolts are garbage. Ive blown a few up in the day 🤣 thanks for watching Joe!!
@Autofaze
2 жыл бұрын
Hey Tommy, thanks for watching! The factory 10 bolt doesn't take any abuse in the t56 cars. The autos will last a decent amount but your rolling the dice when you start abusing/racing it. There is tons of options out there. Good thing is they are easy to change. 12 bolt, 9in, s60 or 8.8 conversion would be your options for getting rid of the 10 bolt.
Looks like you used flipped manifolds what are they out of?
@Autofaze
Жыл бұрын
In one of the earlier build videos we say. I honestly do not remember off the top of my head.
what did all of this cost for the turbo build, interested in getting it done to my T/A
@Autofaze
2 жыл бұрын
Please don't make me look at that excel spreadsheet again lol. Best advice I can give, take your budget and triple it.
I have a 2000 Firehawk 6 manual. How much did everything cost on that setup including motor, rear end, custom exhaust, suspension and everything else I didn't mention. Please I really would like to know because my Firehawk needs all that since I just hit 140000 miles and it needs all that... By the I can't stop saying what a car... Wow just nasty. Enjoy.
@Autofaze
2 жыл бұрын
Appreciate you watching Joe! Man, that would be a long list to come up with 🤣
@armandsmith1027
2 жыл бұрын
You know damn well he was not going to tell you how much the total cost was because it was probably astronomical
@armandsmith1027
2 жыл бұрын
I have a 2000 WS6 convertible six-speed with 135000 miles... and believe me I was thinking the same thing.
@Autofaze
2 жыл бұрын
We appreciate you guys watching!!! This might be the 14th 4th gen we have owned. Definitely very fond of these cars. Googling the parts can you get you round about idea but it is the little things that nickel and dime a build. Custom fabrication isnt cheap, saving up for it is worth it! Vasko Speed was worth every penny, the custom touches aren't like the pre-made kits on the market. Imo, starting with suspension would be your best bet. If you dont need adjustability or want to do drag racing then Sam Strano spring/strut package would be the direction to go. Otherwise, viking coilovers provide a ton of bang for the buck. Adjustable panhard, lower control arms and subframe connectors are always the first things we do to 4th gens. Decide on handling or racing then start part shopping!
You should add another turbo bi-turbo is better than just 1 big turbo.
@Autofaze
2 жыл бұрын
A single will meet our goals! Lots of fast small tire guys running single setups. Duals are rad though. Thanks for watching Tony!
And I thought my on3 build turned out decent 😂
what size are the wheels those are wicked
@Autofaze
Ай бұрын
They are 18s! We have a video on here breaking the wheel specs down if you are interested!
So glad I ditched the auto and put a tranzilla t56 in mine
@Autofaze
Ай бұрын
I have owned a few t56 4th gens, way more fun to drive!
@jeffyeager1997
Ай бұрын
@@Autofaze Yes sir married to some 4.10 or 4.56 gears and perfection is born
@Autofaze
Ай бұрын
@jeffyeager1997 t56 and 4.10s is peas and carrots! Mac & cheese and hot dogs 🤣
The wheels 18+11 rear?
@Autofaze
Жыл бұрын
Yes! Peep the wheel spec video! Thanks for watching
Dyno pulls coming soon ??? Please 🙏
@Autofaze
2 жыл бұрын
This spring for sure! We got our first snow in the midwest so ice treatment is everywhere bleh 😢
@mikeypooh1
2 жыл бұрын
@@Autofaze Is it spring yet? 😬
@Autofaze
2 жыл бұрын
@@mikeypooh1 soon! Having a odd alignment issue on the passenger front. Still need to put in the boostleash 😉
Hey are you on pump gas?
@Autofaze
2 жыл бұрын
E85
Is it just me or are there a disproportionate amount of white turbo trans ams? It wasn’t the most popular color
@Autofaze
Жыл бұрын
We have had this car for a long time. We searched 8 months for a white one. White is our favorite vehicle color. I see black and red the most!
Beautiful car. Not a fan of the exhaust note. Turbo cars always sound like a old dump truck with a junk exhaust.
@Autofaze
2 жыл бұрын
It will get full 4 inch exhaust out the back this winter, street car things. Just wanted to drive it before under freezing temps come 🥶
Nice neckbeard
@Autofaze
2 жыл бұрын
Thanks! I grew it myself.
Please sell me this car??!!
@Autofaze
2 жыл бұрын
Oof 😢