Finally Got the Coyote swap mostly finished up. Also show you guys a startup. Stay tuned there will be more content to come.
Жүктеу.....
Пікірлер: 34
@boostjunkieMike9 ай бұрын
Nice build, car looks great. Fords to the front
@BoostAuthority11 ай бұрын
You're not a certified garage mechanic without the Daytona harbor freight Jack LOL
@robertprowell7933 Жыл бұрын
It’s crazy how ppl put their cars away in the winter and take them out in the summer… here in Az we do the opposite…. Winter they come out, summer 110+ degrees we put them away. Beautiful car man. Gonna order my kit this week, hope you can help me with some questions I may run into
@Blue-fg2gg Жыл бұрын
Keep them vids coming !!!! Super cool to see your build !!
@calebneff118 Жыл бұрын
LETS GO! It's about time we got an update. I'll be watching this tomorrow at work
@TheToo87 Жыл бұрын
Been waiting for this vid !!! man such a great build this guy is a huge help too!!! 👍🏻👍🏻👍🏻
@brian03cobra Жыл бұрын
Very clean and well done on the swap and install. Looks and sounds great!
@tsbperformance1531
Жыл бұрын
Appreciate it!
@CALISPEC1 Жыл бұрын
Clean build 👍
@BoostAuthority11 ай бұрын
That's what just looks like a headache especially when you have to change any of the the belt system
@justbecauseracing6723 Жыл бұрын
Ready for the collab this summer little gm vs ford action!
@glenndiorio8967 Жыл бұрын
Bummer on the fuel line, that's why I ran steel tubing on my swap and followed the feed. Nice and tidy! You still confuse me with your reversed background. 🥴
@elijahmuchwano950 Жыл бұрын
YES YES YES
@killer86coupe8 ай бұрын
Bro I’m gonna be installing the same kit. Just curious on where you put the oil drain. Driver front or rear of the pan? Thanks
@qbandaddy96 Жыл бұрын
Have to take it out on at least a nice boost friendly winter day
@tsbperformance1531
Жыл бұрын
Plenty of that weather going around right now!
@1jzae86 Жыл бұрын
What wheel size offset backspacing.
@kavonroberts47242 күн бұрын
How you liking the tranny ? You running stock ac /heat/starter parts or coyote ac/heat /starter parts and what k-mwmber did you go with
@midnight347 Жыл бұрын
Is this a gen 1 or 2 coyote or is it built? It's bad as hell man the coyote is a solid option for a mod motor car it's alot easier swap because the coyote and mod motor are basically the same thing fitment wise. There are multiple things that don't need to be changed that does need to be changed on a fox for example. Badass! *edit* I just saw in the video it's a gen 1 coyote. Badass bro. Prob need to ditch those 410 gears tho go with like a 3.55 the t56 is geared fairly long so don't wanna go too long but turbos like longer gearing for sure.
@MillennialDad922 ай бұрын
The on3 website says you have to put the alt back in stock location and use electric power steering. Looks like you didn’t. I wonder if they changed the kit?
@tsbperformance1531
3 күн бұрын
That is the way they designed the kit but if you're creative enough you can make anything work.
@XngHtwX Жыл бұрын
What did you use for your hot water tubing? It looks very clean
@tsbperformance1531
Жыл бұрын
GM Heater hose brackets part number 3825416.
@turbocoyote138720 күн бұрын
Question.. one video you said 2011 motor this video 2013??
@tsbperformance1531
3 күн бұрын
When I originally got the engine I was told it was out of a 2011 but after I ordered the Holley terminator for the 2011-12 I found some of the connectors didn't match and the Holley rep informed me I had the 2013 up style connectors I believe it was on the cam phaser connectors. Didn't do any further digging just know it was a gen 1 and at least a 2013.
@BradDeverall2 ай бұрын
Nice build, what size tires are you running front and rear? They look good, trying to do something similar with my 02 gt. Thanks.
@tsbperformance1531
3 күн бұрын
28x10.5 r15
@Jsta2v_racing Жыл бұрын
Clean. What’s the power goals? Planning on taking it to the drag strip?
@midnight347
Жыл бұрын
He said in the video it was basically a race car so I would assume so.
@Jsta2v_racing
Жыл бұрын
@@midnight347 well yes he might have slicks but maybe he decides something else. Or roll racing. Or on the streets 🤷🏻
@tsbperformance1531
Жыл бұрын
I'm shooting for 700 whp for now maybe in a year I'll pull the motor and put forged rods and pistons in and turn it up. I plan on eventually taking it to the track just to see what it would run, but it's mainly a street car. ;)
@woodyw8376 Жыл бұрын
How do you feel about the terminator X ecu? Im doing a similar swap and wanna know how the TIVCT preset from Holley acts under boost
@tsbperformance1531
Жыл бұрын
Factory tune of the ecu doesn't feel the best, but once I had a tuner remote log in and get it where it needs to be it's been great so far. Will report once I get it Dyno tuned on how I feel about the drive ability and such of it.
Пікірлер: 34
Nice build, car looks great. Fords to the front
You're not a certified garage mechanic without the Daytona harbor freight Jack LOL
It’s crazy how ppl put their cars away in the winter and take them out in the summer… here in Az we do the opposite…. Winter they come out, summer 110+ degrees we put them away. Beautiful car man. Gonna order my kit this week, hope you can help me with some questions I may run into
Keep them vids coming !!!! Super cool to see your build !!
LETS GO! It's about time we got an update. I'll be watching this tomorrow at work
Been waiting for this vid !!! man such a great build this guy is a huge help too!!! 👍🏻👍🏻👍🏻
Very clean and well done on the swap and install. Looks and sounds great!
@tsbperformance1531
Жыл бұрын
Appreciate it!
Clean build 👍
That's what just looks like a headache especially when you have to change any of the the belt system
Ready for the collab this summer little gm vs ford action!
Bummer on the fuel line, that's why I ran steel tubing on my swap and followed the feed. Nice and tidy! You still confuse me with your reversed background. 🥴
YES YES YES
Bro I’m gonna be installing the same kit. Just curious on where you put the oil drain. Driver front or rear of the pan? Thanks
Have to take it out on at least a nice boost friendly winter day
@tsbperformance1531
Жыл бұрын
Plenty of that weather going around right now!
What wheel size offset backspacing.
How you liking the tranny ? You running stock ac /heat/starter parts or coyote ac/heat /starter parts and what k-mwmber did you go with
Is this a gen 1 or 2 coyote or is it built? It's bad as hell man the coyote is a solid option for a mod motor car it's alot easier swap because the coyote and mod motor are basically the same thing fitment wise. There are multiple things that don't need to be changed that does need to be changed on a fox for example. Badass! *edit* I just saw in the video it's a gen 1 coyote. Badass bro. Prob need to ditch those 410 gears tho go with like a 3.55 the t56 is geared fairly long so don't wanna go too long but turbos like longer gearing for sure.
The on3 website says you have to put the alt back in stock location and use electric power steering. Looks like you didn’t. I wonder if they changed the kit?
@tsbperformance1531
3 күн бұрын
That is the way they designed the kit but if you're creative enough you can make anything work.
What did you use for your hot water tubing? It looks very clean
@tsbperformance1531
Жыл бұрын
GM Heater hose brackets part number 3825416.
Question.. one video you said 2011 motor this video 2013??
@tsbperformance1531
3 күн бұрын
When I originally got the engine I was told it was out of a 2011 but after I ordered the Holley terminator for the 2011-12 I found some of the connectors didn't match and the Holley rep informed me I had the 2013 up style connectors I believe it was on the cam phaser connectors. Didn't do any further digging just know it was a gen 1 and at least a 2013.
Nice build, what size tires are you running front and rear? They look good, trying to do something similar with my 02 gt. Thanks.
@tsbperformance1531
3 күн бұрын
28x10.5 r15
Clean. What’s the power goals? Planning on taking it to the drag strip?
@midnight347
Жыл бұрын
He said in the video it was basically a race car so I would assume so.
@Jsta2v_racing
Жыл бұрын
@@midnight347 well yes he might have slicks but maybe he decides something else. Or roll racing. Or on the streets 🤷🏻
@tsbperformance1531
Жыл бұрын
I'm shooting for 700 whp for now maybe in a year I'll pull the motor and put forged rods and pistons in and turn it up. I plan on eventually taking it to the track just to see what it would run, but it's mainly a street car. ;)
How do you feel about the terminator X ecu? Im doing a similar swap and wanna know how the TIVCT preset from Holley acts under boost
@tsbperformance1531
Жыл бұрын
Factory tune of the ecu doesn't feel the best, but once I had a tuner remote log in and get it where it needs to be it's been great so far. Will report once I get it Dyno tuned on how I feel about the drive ability and such of it.
@johnparrotte9352
4 ай бұрын
Update on this?