Damn. I wanna scan those fenders.

Dry Ice Blasting!!!

@edochoa3452

Жыл бұрын

Bong rips!!!

@tinosenf6937

Жыл бұрын

@@edochoa3452 What should tear?

I've done body work on two of these styles of truck 1970 fleet side and a 1972 suburban. You did an awesome job on customising your truck and body work it looks like it's going to be a street race truck.

@ag_trucks

Жыл бұрын

Thank you very much! It's a lot of work but it sure is shaping up to be a mean street/track truck👍

@snoopu2601

Жыл бұрын

@@ag_trucks not a panel on that truck you haven't changed and some👍🏽🇺🇸🏁

So fun to watch the truck coming back to life! Such a fantastic job Alec with the body work and the video! 🤩❤

@ag_trucks

Жыл бұрын

Thank you very much😎 Having lots of fun in the process!

i love that you started with a base truck that most people would have scrapped. you saved it from the grave!

@ag_trucks

Жыл бұрын

Thank you! Yes, I knew I was going to go wild with this build so I didn't Want to cut up a nice truck👍

This is the kind of work I like to see experimental, trial and error, just trying to find a result that YOU love, everyone else's opinion be damned! I'm using a similar approach on my 1970 c10 build. Just having fun with it I don't care to adhere to conventional guide lines. Because I'm not doing a restoration. I'm just building a monster of a truck that pleases me! Keep it up! Live the fenders BTW! Those are bad to the bone!

Keep going brother your doing awsome. We all cheering for you here! ❤

@ag_trucks

Жыл бұрын

Thank you! Definitely much more to come👍👍

Thanks for making these they’ve been awesome so far. I’m usually not a stickler for safety but even I would have worn a mask sanding the primer😂

@ag_trucks

9 ай бұрын

Thank you man! Haha, I do wear my mask more often now. Should have been wearing it in the video for sure!

That’s what I Suggest to some of the You tubers that does bodywork Chalk line, Powder like spray way

Protect your lungs dawg

Keep up the good work. I always enjoy seeing your videos and the progress. I like that you’re 100 percent real about what you are doing

@ag_trucks

Жыл бұрын

Thank you very much! I'm just recording the process, as real as it gets👍 more to come😎

Looking better and better. Really enjoying your build man. 👌

@ag_trucks

Жыл бұрын

Thank you! One step at a time! 👍 I'm enjoying the process!

Awesome to see this build progressing from a dilapidated hulk to an awesome looking one of a kind build. A job well done

@ag_trucks

Жыл бұрын

Thank you! It's come a very long way that's for sure! 👍👍

SICK build.

@ag_trucks

Жыл бұрын

Thank you very much!!🤙

I found you channel on Instagram then watched every old video last week. Great build, can't wait to follow along

@ag_trucks

Жыл бұрын

That's awesome, thanks for watching! I'll be sure to upload some more content and updates along the way! Glad you're enjoying 👍

So great to see you doing alot of the work yourself. And doing it right. Keep up the great work man. 👍 👌👌

@ag_trucks

Жыл бұрын

Try to do as much as possible! Thank you very much😎👍

Great build

@ag_trucks

Жыл бұрын

Thank you! Appreciate it👍

Super nice dimensions on the cab.

@ag_trucks

Жыл бұрын

Thank you very much!

Keep up the great work! Your build has giving me a lot of motivation and confidence to continue to pursue my truck build!

@ag_trucks

Жыл бұрын

Love to hear it! That's why I make these videos! Thank you man👍 more on the way very soon

Beautiful Car! Its low suspension wheels fit perfectly! ❤❤❤

@ag_trucks

Жыл бұрын

Thank you!

Etching primer is what you need for bare metal

You're an amazing craftsman

@ag_trucks

Жыл бұрын

Thank you very much roger👍

Love this build man.

@ag_trucks

Жыл бұрын

Thank you very much!👍

insane work man

@ag_trucks

Жыл бұрын

Thank you!!🤙

Awesome work! 👍👌💪

@ag_trucks

Жыл бұрын

Thank you man👍👍

Nice work 👍😜

@ag_trucks

Жыл бұрын

Thank you!!👍👍

Give that beast a 2’’ chop it’d look mean!

Nice one🔥💯💪

@ag_trucks

Жыл бұрын

Thank you man!

Keep it up kid, loving the progress!!

@ag_trucks

Жыл бұрын

Thank you very much! More videos to come!👍

Art ❤ salute 🤚

@ag_trucks

Жыл бұрын

Thank you👍👍

keep pushing on bro, well done

@ag_trucks

Жыл бұрын

Will keep going for sure! 👍 thank you very much!

No slowing you down....looking great!!

@ag_trucks

Жыл бұрын

Thank you!!🤙

You are definitely making a mink stole out of a sow’s ear!

@ag_trucks

Жыл бұрын

Haha exactly😂👍 thanks!

Awesome build man! i love c10's

@ag_trucks

Жыл бұрын

Thank you very much!🤙

Awesome video as always, Alec

@ag_trucks

Жыл бұрын

Thank you very much Cody🤙👍

The stance on that is beautiful. NAS car style

@ag_trucks

Жыл бұрын

Thank you! That's what I was going for🤙

Looks awesome bud

@ag_trucks

Жыл бұрын

Thank you very much👍

Nice video.

@ag_trucks

Жыл бұрын

Thanks Chris! Appreciate it👍

Always excited to see a new video from you. Progress is looking fantastic.

@ag_trucks

Жыл бұрын

Thank you! More to come👍👍

I am enjoying and inspired by every video.

@ag_trucks

Жыл бұрын

Glad to hear it! More to come👍

First time watching and I’m subscribing

@ag_trucks

Жыл бұрын

Glad you found the channel! Thank you very much!👍

Nice progress, body work can be quite a slog to get through but you are making it look easy!!

@ag_trucks

Жыл бұрын

Thank you! It is very tedious but I enjoy it! 👍

Lookin good !!! Little bit at a time it’s coming together. I’m doing some body work today as well ( inspection due this month lol) not quite as fancy as your work haha just patching holes. I did get a little inspiration from your work though 👍👍

@ag_trucks

Жыл бұрын

Thank you Russell! It's tedious work for sure. Glad to hear I could give you a little inspiration to do some bodywork👍👍

Yesssir bro!!! Those panels are turning out great!!! Fender flares looking great and so does that high rise intake!!!! Love it bro!!!

@ag_trucks

Жыл бұрын

Thank you bro!! It's all shaping up! Can't wait to see what you come up with for flares🤙

@DustyMacsGarage

Жыл бұрын

@@ag_trucks yesssss bro!!##

Needs a 3inch choped top

Yeah congrats

@ag_trucks

Жыл бұрын

Thank you!!

Top of Galaxy

So dope 🎉

@ag_trucks

Жыл бұрын

Thank you man!!!🤙

this truck needs the wagon back 😩

@ag_trucks

Жыл бұрын

It would look good but too far in to change it now

Love the content

@ag_trucks

Жыл бұрын

Glad you're enjoying it! More to come🤙

America 🇺🇸 💪🏼

@faustovallejos2916

Жыл бұрын

Bro, America is from Tierra del Fuego Argentina to Alaska United State.

Not sure how you still only have 8k subscribers! Keep it up!

@ag_trucks

Жыл бұрын

Thank you very much man! 👍👍

Looking good I want a truck that year put tape over your letters to keep body filler out of them .I used duct tape

@ag_trucks

Жыл бұрын

Thank you! Good tip👍👍

Way to roll with the punches kid. Tough setback but you overcame it

@ag_trucks

9 ай бұрын

Thank you! A few set backs make for more satisfying achievements👍

Flat spray paint works just as good and less mess

@ag_trucks

Жыл бұрын

Good to knowl! Thanks for watching👍

New subscriber here! Awesome work man, turning out amazing. You deserve a hundredfold increase of subscribers.

@ag_trucks

Жыл бұрын

Thank you very much man 👍 more and more people are finding the channel every day! Love being able to show the progress with all of you🤙

First things first! I was so mad when I found your build. Not at you but at myself I have had my 69 c10 torn apart for over a year and have not made any progress. I love the flares I want to do some on mine. Can I get mor information on the crown vic swap I would like to go that route over a janky mustang 2 kit. Keep up the great work.

@ag_trucks

Жыл бұрын

Thank you very much! The crown vic front crossmember was quite easy to mount since my chassis was made to fit it exactly. If you have an original c10 chassis, you would have to highly customize it and make the frame wider to adapt the crown vic front end.

@skeens85

Жыл бұрын

@@ag_trucks thank you for taking the time. I saw the flared fenders and was instantly sold on the idea.keep up the great work.

crazy :0

How much tire clearance? Pretty sharp for your age! They will vat the block most likely to get the sand & duct tape off

@ag_trucks

Жыл бұрын

The tire clearance is around 1.5 inches to the bottom of the fenders, in the video it isn't perfectly set so that's why it seems very close. Thank-you! They most likely will👍

I’m just realizing I missed this video upload by three days. Seeing the Hi-Ram intake is exciting as fuck! Keep up with the badass updates! Looking forward to the engine assembling ! Hearing that first start with the turbos. Sheesh, I’m bout to be wet as fuck . XD You ever just sit back and look at the truck and all of its beauty? Just watching these videos makes me think about the good Ol days of owning a C10 .

@ag_trucks

Жыл бұрын

Hey man! Thank you🤙 I can't wait to assemble the engine and hear it roar for the first time😎 it's going to be epic! I always love stepping back and admiring what the truck is becoming👍 I appreciate the support and there's lots more videos to come!

@TaylorJhz

Жыл бұрын

@@ag_truckswhat color were you thinking of makin the truck when you come to that point? Bare metal with a clear coat? Olive Green? An original C10 color? I know you’ve talked about this in previous videos, I just can’t find the video.

Niiiice! 👍💯

@ag_trucks

Жыл бұрын

Thank you👍

Just found your channel. Great work man, excited to follow the build. What size tires and wheels are you running? Looks fantastic.

@ag_trucks

Жыл бұрын

Thank you very much! Welcome to the build! 🤙 Wheels are 15x10 aero in the rear with 325/50r15 nitto nt555r2 tires and up front it's vision D window 16x8 rims with 265/50r16 toyo proxes r888r

Looking great.

@ag_trucks

Жыл бұрын

Thank you 🤙 I love how it's turning out!

👍😊

I have a 1970 Chevy custom, got to use for 3 weeks it was a gift from my uncle sadly I had fallen asleep behind the wheel and crashed messed up the whole front grilled and both front side panel are bent but this and many other videos have inspired me to get back up on my feet and fix it back up love the work your doing bro

@ag_trucks

Жыл бұрын

Glad to inspire you to fix it up! Definitely worth it👍

Wicked job, just subbed. Im looking to do something similar. Love those flairs on the fenders, Did you fab them? Ill be watching your build from the start tonight.

@ag_trucks

Жыл бұрын

Thank you very much! I did fab them up myself, I have a video showing how I did it. You'll see it once you go through the videos👍

Do it👉 😎🇮🇩

God bleaa

Bitchin aggressive profile!

@ag_trucks

Жыл бұрын

Thank you very much man🤙👍

you putting suspension on or are you leaving it solid

@ag_trucks

Жыл бұрын

I'm putting qa1 pro coilovers

U need to go with the comp turbo that is air cooled

@ag_trucks

Жыл бұрын

I'll check it out!

How did you unbend the tailgate?

@ag_trucks

Жыл бұрын

The inner skin of my tailgate has been cut out to shave some weight so it's basically just the outer skin now. It was easy to unbend by tapping with a hammer in certain spots and applying force but it gets trickier with a factory tailgate.

Why did you use fiberglass instead of sealer on the bare metal before you primed ?

@ag_trucks

Жыл бұрын

I've always had good luck with fiberglass. Wherever I weld I put some just in case so that water can't reach the bodyfill

WHT color are you going with?

@ag_trucks

Жыл бұрын

I'm painting it white

What ecu you going to use

@ag_trucks

Жыл бұрын

Holley terminator

Tires and wheels size please😅😅😅😅😅😅😅😅😅😅😅😅

@ag_trucks

Жыл бұрын

Wheels are 15x10 aero in the rear with 325/50r15 nitto nt555r2 tires and up front it's vision D window 16x8 rims with 265/50r16 toyo proxes r888r

@gaijin9917

Жыл бұрын

Tanks bro👍🇺🇸

Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting company for nearly 20 year and we're looking for sponsorship!

Advice joke off of you if you sell it to me you can fix it up

Beautiful truck brother… I bought delete plates from LS fab, I also ordered fender flares, going a pro street style truck, what flare did you go with this? I think I have a 3.5” flare which was moderate for the front end

@ag_trucks

8 ай бұрын

I'm not sure exactly how much flare it is, it's custom made to my tires so I don't have precise measurements compared to stock. Thank you!