Tuning the Valmet 505 tractor for more power

Автокөліктер мен көлік құралдары

I'm adjusting the fuelpump on my Valmet 505 tractor to gain more horsepower and testing it out before and after.

Пікірлер: 44

  • @erichubert8428
    @erichubert84284 жыл бұрын

    Awesome, you did a great job!!! Thank you for your videos, we are lucky to have you to entertain us during this crisis.

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Glad you enjoy it!

  • @dallasbaiton3234
    @dallasbaiton32344 жыл бұрын

    Awesome but will Greta approve of you using more fuel 😂😂😂😂😎 good to see the internet working for you on how to maximize your tractor power .

  • @danielshelg297

    @danielshelg297

    4 жыл бұрын

    he will use less diesel when he is working with it. can do same job with less rpm. he gains NM.

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    He he let's hope she doesn't notice😅 Yes internet is awesome :)

  • @donc81
    @donc814 жыл бұрын

    Be careful when turning the fuel up. It may increase exhaust temperatures. Great video. Love the drone footage at the end

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Yes with about 2 turns on the screw the middle cylinder gets to hot, so max recommended is 1,5 turs. So it seems like its well proved on this engine according to internet. The drone video is from the island I did the excavation for an extension on a building and took down a stone wall.

  • @dennisocallaghan1380
    @dennisocallaghan13804 жыл бұрын

    Like your vidios no more snow

  • @andreasrang5031
    @andreasrang50314 жыл бұрын

    Bra video👍🏻😎

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Takk

  • @MrJokkoma
    @MrJokkoma2 жыл бұрын

    Nice video man, interesting to see before and after prestandas. If you're gonna push the engine a lot during longer interwalls one way to help it hold would be to install a intercooler. It also would gain some hp and help you hold down the temperature on your engine, a win win situation so to speak. Since you got that pressure pipe between the turbo and the intakemanifold the operation shouldn't be way to expensive, the piping back and forth to the front of the watercooler will be worst part of course. I had plans doing it on a Valmet 405 I had but failed in motivation and time. I wish you better luck and strength.

  • @MiniMachines1

    @MiniMachines1

    2 жыл бұрын

    Thanks, glad you liked it. I sold the valmet before I got a chance to do something more, but the difference was amazing, like a new tractor after tuning. The only problem with it was no clutch less changing between forward reverse...

  • @wtfbuddy1
    @wtfbuddy14 жыл бұрын

    Nice drone shots

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Thanks 👍

  • @libertyauto
    @libertyauto4 жыл бұрын

    Interesting results. I am glad you did a before and after. With gasoline engines, leaning the mixture will provide more power. (with risk of run hotter and pre-ignition). I do not know with diesel, if that is the same. Did your adjustment lean the air/fuel mixture, or make it richer? Thanks for your videos.

  • @MrVinter123

    @MrVinter123

    4 жыл бұрын

    More fuel = more power on a diesel, and a diesel without wastgate it also means higher boost pressure

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Yes I knew the hill was an challenge before so was nice to see the change 😀

  • @eddiemortontapman7252
    @eddiemortontapman72524 жыл бұрын

    Great to see you this week , will your piles of snow melt and be gone by June ?

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Me and the kids was out yesterday measuring them, the highest is 4,3 meters high so I'm starting to wonder if I will see the lawn this year 😂

  • @merrymanrc
    @merrymanrc4 жыл бұрын

    I like your hat it look good on you I bet it keep your ears warm. Do you have headlights because I don't see any lights on the road when you you driving

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Thanks, yes it's nice when it's cold out ❄️ Yes I do, I but they are behind the bucket, so I installed an small ledbar on top of the hood, but it's probably hard to see the light from it on the screen. It's most for other traffic to see me

  • @kimandreskaugerud7353
    @kimandreskaugerud73534 жыл бұрын

    Suksess. :-) Kan sikkert skru en halv runde til. Som du sier så pass på varmen. Min 1056XL har etter montert turbo og justert opp fra 105 Hk originalt til 136 Hk på tappen, noe som tilsvarer ca 145 i motor. Jeg har montert en ekstra kjølevifte til de virkelig tunge dagene. med en enkel av på bryter. Fint å se litt dagslys hos deg også.

  • @siimsaare1638
    @siimsaare16384 жыл бұрын

    What drone are you using?

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    I'm using an dji phantom 4adv here, and I also got an small spark that is better on auto follow, except in this video where it crashed in a pole 🤣 kzread.info/dash/bejne/hZyTtdObktuWn6w.html

  • @lucasbergfors9446
    @lucasbergfors9446 Жыл бұрын

    Jag hade gasen lös på pumpen i min Case 1294 efter att jag spänt fast gasen varvar den bättre och gick hårdare jag har tre kompisar som har en Valmet 605, Valmet 705 och em Valmet 805 hälsningar från Svensk Finland 😁🇫🇮

  • @odin-eliottodinson7330
    @odin-eliottodinson73304 жыл бұрын

    Message in English will follow E d i Akkarfjorn du har vært m drona å flydd? Har ikke vært oppe på fjellet der på vinteren, men d va jo nydeli utsikt. Godt å få skrudd opp pumpa litt ja. Mye mer effektiv gange når du får mer diesel. ---- The dronefootage is from Sørøya? I haven't been up in those mountains during the wintertime, but an astounding view. Adjusting the pump for more diesel is good for power. More diesel = more power.

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Yes it's Akkarfjord same place I did the excavation out on a island. It's really nice out there driving snowmobiles in the winter. Drone video is from last year.

  • @dennishayes65
    @dennishayes654 жыл бұрын

    Would have been nice video with a light !

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Yes to much faith in our little daylight 😔 sorry

  • @KEEPERBJr
    @KEEPERBJr4 жыл бұрын

    TRY bending the end of the wrench ???

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    If I was suppose to do this often I would bend it but not worth bending it for one time 😊

  • @aripuisto
    @aripuisto4 жыл бұрын

    You need to add intercooler.

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Yes and some nos for when the snowblower get really full 😁 but an intercooler would probably give me a few extra hp 👍

  • @johnnybuss5637
    @johnnybuss56374 жыл бұрын

    Too dark, we see nothing!

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    Sorry I checked with my phone now and it was much darker then in editing, I had to much faith in the little daylight I had 😔

  • @hanzon
    @hanzon4 жыл бұрын

    Make movies in daytime if you can

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    There will be more daylight now, but the problem is I'm at my day job when it's daylight 😔 but now it's not dark before around 6 in the evening so it will be better

  • @hanzon

    @hanzon

    4 жыл бұрын

    @@MiniMachines1 I see, looking forward to see more

  • @seansysig
    @seansysig3 жыл бұрын

    Check your camera lighting before doing the actual work

  • @MiniMachines1

    @MiniMachines1

    3 жыл бұрын

    Yes sadly I didn't have enough lights for this video, but was hard to do over with all the snow we had last year.

  • @andreasrang5031
    @andreasrang50314 жыл бұрын

    Bra video👍🏻😎

  • @andreasrang5031

    @andreasrang5031

    4 жыл бұрын

    Forresten hvor mange timer har den gått?

  • @MiniMachines1

    @MiniMachines1

    4 жыл бұрын

    @@andreasrang5031 8-9000😁 knapt nok innkjørt 😀

  • @andreasrang5031

    @andreasrang5031

    4 жыл бұрын

    Mini Machines sant det! 😄 disse holder jo over 20 000 timer med bra service!😎 gått 86xx min👍🏻

Келесі