You are the best. Been loving this!

é possivel configurar o lightburn para se conectar via wi-fi? Se sim, como?

just recently purchased the TTS-55 Pro 5.5 engraver and this is an old version of Lightburn and a 12 months tutorial will the settings you showed apply to the new machine purchased 02/2024? I don't want to change anything if it will mess up my printing please advise thank you

My Two trees laser has been disconnecting in the middle of work. This has made me throw away various valuable art pieces. I have adjusted the usb power settings to never sleep,reflashed the firmware and cross checked on everything else including if the frame is well fixed. What could be the problem ? Its pure frustration here.

How do I add limit switches to TTS-55 Pro? I bougth air assist, honeycomb, roller and riser and also want to know on laser head upgrades to use with this frame and board? Thank you

@Twotrees3Dofficial

4 ай бұрын

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 17722826689 or emailing, service@twotrees3d.com to get a faster reply.

Good video but way to fast. I wish you create another that did not move so quick

lightburn no está encontras o lasers o que pode ser feito?

@Twotrees3Dofficial

Жыл бұрын

Olá! Pelo que entendi, você está tendo problemas para que o LightBurn encontre o seu laser. Isso pode ser causado por várias razões, como problemas de conexão, configurações incorretas ou até mesmo um problema com o próprio laser. Aqui estão algumas coisas que você pode tentar para resolver o problema: Certifique-se de que o seu laser esteja conectado corretamente ao computador. Verifique se o cabo USB está conectado corretamente e se o laser está ligado. Verifique se as configurações do LightBurn estão corretas. Vá para "Dispositivos" na barra de menu e certifique-se de que as configurações do seu laser estejam corretas. Certifique-se de que o tipo de porta e as configurações de velocidade estejam corretas. Tente reiniciar o LightBurn e o seu computador. Às vezes, um simples reinício pode resolver o problema. Se nada funcionar, verifique se há atualizações disponíveis para o LightBurn ou para o driver do seu laser. Às vezes, atualizar o software pode resolver o problema.

Comprei esta máquina recentemente e não consigo conectar ao lightburn de maneira nenhuma. Aparece sempre o erro 5. Tem alguma solução? Obrigado

@Twotrees3Dofficial

9 ай бұрын

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.

When I start lightburn it appears this : error:5 El ciclo de autoguiado no está habilitado en la configuración de Grbl. -Auto-Guidance Cycle Is Not Enabled in Grbl Settings How do I correct it?

@Twotrees3Dofficial

4 ай бұрын

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 17722826689 or emailing, service@twotrees3d.com to get a faster reply.

Please do an English version of this.

@Twotrees3Dofficial

Жыл бұрын

There are English sentences in the video

@tvengineer

Жыл бұрын

@@Twotrees3Dofficial And they go way to fast.

@Twotrees3Dofficial

Жыл бұрын

@@tvengineer Hello, we have received your suggestion, and we will pay attention to this problem when we make it in the future. At the same time, we will inform to the staff to make some adjustments to the existing videos. Thank you very much for your suggestions and hope all our videos are helpful to you.

@SOKHager

Жыл бұрын

​@@Twotrees3Dofficial What was even done at 3:20-3:40?

@Twotrees3Dofficial

Жыл бұрын

​@@SOKHager There are English subtitles at the bottom of our video, you can refer to it🙂

Não tem português BR linguagem?

@Twotrees3Dofficial

Жыл бұрын

Hi, Jose. Please set the language settings within the software.

wifi tts-55 for macos?

@Twotrees3Dofficial

10 ай бұрын

Hello! Friends, how can I help you?

@michalhorsky3393

10 ай бұрын

@@Twotrees3Dofficial Hi yes I find original sw, download software for mac

LightBurn is not even able to connect a simple TTYUSB connexion. It make several threads, that block the port, saying it is in used afterwards. How to they dare to ask money for such a bullshit?

@jeanyves5380

Жыл бұрын

And i have a continuous G0 sent on the console but no response. What's the hell? I'm really sure my port is OK it works with candle.

@Twotrees3Dofficial

Жыл бұрын

@@jeanyves5380 Hi! if you want tech support we suggest you contact the after-sales engineer department Whatsapp: +86 177 2282 6689 or send email to service@twotrees3d.com to receive a faster reply. Thank you for your understanding and support!

@Twotrees3Dofficial

Жыл бұрын

For all your technical questions about the machine, our after-sales department can serve you

DO not use this settings, it may damge your machine!!!

@Twotrees3Dofficial

22 сағат бұрын

What do you mean by potentially damaging the machine, dear?

Not usefully. Try again

@Twotrees3Dofficial

Жыл бұрын

Hi! Do you need help installing and using Lightburn?🙂

What means X homing direction invert, and Y direction pin invert? does it have to be done? I dont know what hapenned but machine went wrong because I click up arrow and move down, click left arrow and move right, whya happens that? And please anwer me here, whatsapp number does not work and email did not anwer yet- Thank you

@pumm3l46

Ай бұрын

did you figure this out because this is happening to me as well