Those are the ones im running! They're awesome!

Adam when your 2jz is done and Nicole's 240 is not running as good as its potential why don't you swap out ur sr20 put your 2jz in your 240 (duh) then put your sr20 in Nicole's car and Nicole's sr20 rebuild it and in case your 2jz blows up or something or Nicole's sr20 blows up or something just put the extra sr20 in and there

@huntercorle317

7 жыл бұрын

Luis Angel Banuelos or. he rebulds Nicole's and put his sr in the miata shell

@gelitokomander03

7 жыл бұрын

Hunter Corle yeah that's what he has been wanting to do

@aperson4933

7 жыл бұрын

They are going to sell the Miata, though. But putting the good SR20 in Nicole's 240sx is a great idea.

@maurdr

7 жыл бұрын

isnt the sr in nicoles 240 aready fully built thought, the engine seemed fine even with it hydrolocking.

@DrumUp

7 жыл бұрын

they said in the video where Nicole takes the miata to a meet that she falls back in love with it and decides not to sell it

Nice. I appreciated the concise explanations of how radiators work, and the issues one may face when drifting.

I have an aftermarket Fenix Alloy Radiator in my MX5 and definitely learnt something today about getting the air pockets out of the cooling system! thanks Adam! keep it sideways

Mishimoto is one of my teams sponsors, absolutely love them. Highly recommended to everybody/anybody looking for a new radiator,intercooler, oil cooler, fans etc

is a old isis radiator !

@moonshine8250

7 жыл бұрын

Tassoss13 yeah ino 😂😂😂😂

@haigy9193

7 жыл бұрын

Tassoss13 😂

@LapLandSystem

7 жыл бұрын

why ish it so funny? ISR was ISIS before The Clown Show ISIS started their bullshit.

@moonshine8250

7 жыл бұрын

Evelyn Quinn Isis is a terrorist group not a race wtf 😂

@Dujiko

7 жыл бұрын

ISIS parts changed their name to ISR for obvious reasons.

Never get bored watching your channel Adam keep up the good work'

I have no joke been looking forward to you uploading all day xD

Adam can you do a really good car check on the 240 .. really detailed .. like where you got the parts how much you have invested what steps you have taken ? please

"Dont make fun of my funnel." I use cutted piece of bottle

Can't wait for the new kit.

love you adam your videos make me so happy and they helped me through some though times ❤

hey Adam, what ramps were those in the beginning of the video? would like to know thanks!

@AdamLZ

7 жыл бұрын

Race Ramps (got them from enjuku).

@hfc_zenth7385

7 жыл бұрын

Hi Adam LZ you are awesome and Nicole too have a nice day

@tthegamer8293

7 жыл бұрын

My friend has them they work perfectly

Adam whats happening with the Gtr in Connecticut please reply

@tqmixing1168

7 жыл бұрын

ya what's going on with the Gtr

@vancesmith62

7 жыл бұрын

tthegamer82 he said it's sold and being shipped out

@DVSkater0991

7 жыл бұрын

What GTR?

@hfc_zenth7385

7 жыл бұрын

Ben Richardson yay what gtr your right

@tthegamer8293

7 жыл бұрын

the Gtr that he wanted to get to use when he is in Connecticut

friggin love the 240 videos

I love watching Adam's install videos. He's not a fully qualified mechanic so anyone can copy his installs. Awesome video dude, keep it up.

Why not throw in the sr into Nicole's car when you swap your 2j in the 240🤔

Should have gotten a koyorad radiator

@Connor-bq2xo

7 жыл бұрын

Crisp Films Probably got the Mishimoto for free

@Connor-bq2xo

7 жыл бұрын

Or at least super cheap

@undercoverwookiee6686

7 жыл бұрын

Connor yeah there's been a few youtubers lately who have gotten sponsorships from Mishi

@mannyramirez6002

7 жыл бұрын

Evelyn Quinn bitch you everywhere in th comments

keen for the 240 updates man. I've owned 3x Onevias over the years and i really miss them now. getting keen to buy another silvia.. 😎 loving the videos man. 👌

Nice work Adam.

You should get someone like Nicole or Single Tip to film while you're installing the new stuff and make it into a cinematic video!

You should mod the 335i more. Like LSD, upgraded turbos, etc.

@AdamLZ

7 жыл бұрын

It's my daily so I'm trying to keep it reliable :p

@aidenhenderson3648

7 жыл бұрын

Have you ecu flashed ur car?

@Hanzthelord

7 жыл бұрын

He has custom tune and all the bolt ons

@aidenhenderson3648

7 жыл бұрын

Oh okay. Whats the and tourque

@Hanzthelord

7 жыл бұрын

~400whp 430wtq

I really like this style of video

This morning in advisory my teacher was talking about his truck and boat having problems running, after he was done talking I raised my hand and super calm and confidently said "why, racecar." And then one of my friends who watches u said how he hates all the car stuff but I love it all cause I bmx and my dad drifts and I wanna drift so, um, like, ya, RACECAR!!😂😂😂😂😂

i love when youtubers talk to us like its a tutorial on how to do something when 99% of us dont have whatever hes doing. Hes talking to 1.5 million subs like we all are about switch our radiators on our 240.

@undercoverwookiee6686

7 жыл бұрын

Why, are you jealous or something? There's probably multiple people that aren't neccesarily fans of adam that need to know how to change their rad.

@rattlecanrx7594

7 жыл бұрын

Kyle Legault He isn't being jealous lol just saying he likes this style of video smh

@badabing2302

7 жыл бұрын

Kyle Legault u don't need to have a 240 to change a radiator lol

@isaacfarmer7138

7 жыл бұрын

He's making good content. If he just changed the rad and didn't say anything, it would be boring and nobody would watch

@Jo_Galezo

7 жыл бұрын

Kyle Legault there are a large large ammount of his subscribers that do have 240's or race cars or anycar for that in general where they probably are curious to change their radiator

How come you don't use the lift?

@Juicymiketj

7 жыл бұрын

NastE39 that's what i've been thinking lol

@alecparkes5036

7 жыл бұрын

probably because you dont need to lift the car to change the rad. more effort then its worth

@Jaffroman87

7 жыл бұрын

if you look it appears that the plates he got for spreading the load due the concrete in the floor not being thick enough are leaning on the wall behind him and the post nearest the window has no arms installed. I don't know why the ramp company didn't install the ramp for him rather then let john boy Walton install it so he could get some youtube promo.

@naste3950

7 жыл бұрын

It would make it easier because you could put the car a bit higher at your own level so you dont have to be bending over, plus it would make flushing the system faster.

@xaviersequeira4831

7 жыл бұрын

Miguel Roa He still has to install the plate for the arm by the window. He doesn't have a grinder to cut down the old bolts.

Love the new outro keep up with the best content on youtube and inspiering

Your SR20DET is now as cool as ice!

your intercooler isn't level with the body kit and it annoys the absolute fuck out of me

@ttguitarnoob

7 жыл бұрын

did you even listen to the dialogue lol

Wait are u putting a 1jz in or 2jz

@Steve_Sorel

7 жыл бұрын

2jz

@Juhkwez

7 жыл бұрын

SlyGamingHD 2jz

@garren3498

7 жыл бұрын

2jz

@jaycee2689

7 жыл бұрын

SlyGamingHD gallo 24

@Steve_Sorel

7 жыл бұрын

I didn't know pizza places made motors

Live, love, keeping the SR alive

can't wait for your next drift event !

why not just get another chassis to put the JZ in? save the SR's!

@KasamS

7 жыл бұрын

tronbomb3232 if he gets a new car he'll need to do suspension angle ebrake etc and he's already bought the driveshat for it so there's no point in gettin a new car

@Jake-kj6zr

7 жыл бұрын

Kasam "driveshat" DEAD

@KasamS

7 жыл бұрын

Jake Lee u wot ? you get what i mean

@NitroNuggetTV

7 жыл бұрын

don't forget this car "accidentally" became an all out drift car, and now the purple 240 is being made into what this car was originally meant to be... if that makes sense

@ItsDefuPvP

7 жыл бұрын

NitroNuggetTV cream s13 was supposed to be drift car since adam got it, he talked about learning to drift with the 240sx,he talked about it in 240sx video, what he made (i dont remember the name)

why doesn't adam turn on his underglow anymore?

@oldblood_eyes

7 жыл бұрын

Nightshade Gaming too ricey

@darksondap94

7 жыл бұрын

Wiring got burned in the engine fire, maybe he didn't bother fixing them

Your videos are awesome mate keep doing what your doing

After filming install videos, props. Nice watch.

I love you Adam I'm coming from Roman Atwood's video..

y don't u take your car to the dragon strip and race it. like so Adam can see

@cotton3588

7 жыл бұрын

Jayson Garibaldi it's a drift car not a race car

@driftspecs13

7 жыл бұрын

lol, dragon strip

@driftspecs13

7 жыл бұрын

Evelyn Quinn lol, 350+ hp in a 2400lb car is not slow. You're out of your fucking mind. Go back to watching makeup tutorials.

@masonsmith9222

7 жыл бұрын

that car would get out ran by halfton Chevy trucks

@RogueCowTurd

7 жыл бұрын

it doesnt matter how much power it has. if its designed to drift i wont go very well at the drags

love your channel man

Those ramps are awesome

Adam i love the extended outro

finally, waited the whole day for this. :D

love your videos keep up the good work

This was so satisfying

Wow that new radiator sure is pretty hope it works

love your vids and stay positive

Good video. Nice explanation. Loved it.

hey man i met you at the event last night it was cool to finally meet you man. hope to see you at fd

would really love to see you work with mishimoto on a front mount intercooler that has the LZ logo on the front. i personally think that would look pretty sweet. Nice touch to go along with the grip royal steering wheel.

Loved that outro video!!!

nice to see the lift doing it job.

Vented hood and oil cooler helps heat problems a lot!

love garage work vids! more!!

Adam..Very good video been following your overheating props for awhile now...finally you showed a video with your water pump pulley and i thought your running a standard 1.The other problem you are facing is called water pump cavitation.What that is the water pump is spinning that fast a high RPM the pump CANNOT get the water though the engine block to the radiator to cool your coolant.Your going to have to install a smaller diameter water pump pulley to slow your water pump down at high rpm.The other thing i would suggest is take your radiator to a radiator shop that knows water there doing and get them to baffel it.What this does is makes the coolant go thought the radiator more times before it goes back to the engine.I have built many race car engines and have seen your problem many times....HOPE IT SOME HELP TO YOU and keep the vids coming i enjoy them much

Props to you man getting top of the line shit.

have a great day Adam!!!

This should be num one on the list for all engines being pushed. Least u got round to it eventually. 👊🏻

cant wait for the new bodykit :D

love the vids man keep it up

Nice demo.

Mean vid Adam! 👍👍

Big fan love the 240 vids

love your videos Adam ! :D

Damn Adam you went all out

Love the videos don't change a thing👍

just as im about to get started on homework, adam uploads another video. ughhhh

Tip for future installs: i would personally love to see some time laps and different angles, and just filming everything you do, and explaining what you are doing :)

Get yourself a spill-free funnel that attaches to your radiator. Makes filling and bleeding the cooling system a lot easier and cleaner.

Adams youtube channel is better than any show or series. its real world and how I'd live my life. He needs a reality TV show.

I had so much time today, and I ended up watching a lot of your older videos. I saw the one with Ethan's 350z and I think it would be amazing if you did a car and BMX video together!

can't wait for bash bar and body kit

love the videos bro

So sick. loved your 240 since stock

@wardgentjens2338

7 жыл бұрын

Owen Dugan it never was stock he bought it with Some mods already on it

@bmxicler6106

7 жыл бұрын

Ward Gentjens It was stock before he bought it. Look it up on KZread pal!

@bmxicler6106

7 жыл бұрын

Ward Gentjens I meant body but okay

I love this car so much

You only need to bleed systems where the engine sits higher than the radiator. Ive spaced the radiator to sit above the engine to fill the system then bolted it on place. It works better than the breeders which love to break off.

Adam, just wanted to let you know about a coolant funnel that I use when I work on the cooling system. Google "coolant funnel" and you will see a funnel with adapters to install on the radiator cap. Much less of a mess and helps burp the system.

Sick logo on radiator equals plus 420 coldness

I fraking love the outro song

Awesome Video.

doing good man keep it up

I saw your crew today driving back from an event. Alan white car on a trailer with Excursion I think pulling. The three 240's had tires running shotgun. It was 3ish in Palm Bay.

after watching this video, i have been inspired about cars. and btw awesome car

time lapses of u working on shit is always cool

Awesome video adam and you are so right about this being a great starter job on a car. This got me into working on cars a little over 4 years ago and I just completed my first engine swap! Im also doing a Bash Bar Build and Fabricaition Basics videos on my channel coming up, so give it a look if your interested everybody.

I wanna see more installation videos and stuff like that. I live in Japan and im tired of not knowing what was does what under the hood 😂

My fav youtuber

Awesome Video keep doing it !

I don't know if you have ever used water-less coolant but its super. I currently use EVANS and im very happy, especially if you consider that the average temperature here during the summer is 39 degrees Celsius (!). You just have to make sure you follow the installation steps PROPERLY.

great vid,keep it simple Nice work!

The outtro 👌🏼

you are also teasing us for that build comp you are doing in August

Really want to see the 240 drifting again!

Great vlog broo

@Adam LZ a quick easy fix to overheating is to have the plastic undertray under the car. you have a gaping hole under the car in front of the radiator. any air that goes through your bumper will take the path of least resistance and go back under the car where there tends to be a negative pressure that will suck the air away. you can build something out of corrugated plastic or something and zip tie it to your bumper and rad supports

can't wait for the new body kit video @adamlz

llove your videos

love the car vid

love the vids

please stay with the BN kit it fits the style really well and it shows you had some use of it

Intro song is called Hammock from davidcuttermusic