It's about time!
Автокөліктер мен көлік құралдары
Kinda crazy to think I've been without one of these for literally the whole time I've owned the car. Alberto stopped by and helped mock up and fab some brackets to get it all set up and ready to rip! LZMFG.com
www.mishimoto.com
Alberto Big Boost - / @albertobigboost
David Cutter - / dcuttermusic
Пікірлер: 805
Hey Dale
@milesvernon6295
6 жыл бұрын
Cleetus McFarland do it for dale
@themagicillusions
6 жыл бұрын
Cleetus McFarland Have you been sniffing the nitrous again?
@luisdanielmendozaaguilar8455
6 жыл бұрын
Cleetus McFarland Do ir for Dale! My two best yotubers.
@cod4madass
6 жыл бұрын
DO IT FOR DALE!
@badaclash
6 жыл бұрын
Hey dale
That trip clip tho
@xavier4519
6 жыл бұрын
JLA Garage he took us a little bit too seriously lol
@fransvanzelst1398
6 жыл бұрын
Tought my phone glitched
@leongibbons8463
6 жыл бұрын
JLA Garage ikr
@leongibbons8463
6 жыл бұрын
Frans Van Zelst same
@davidkoslowski8304
6 жыл бұрын
Frans Van Zelst same😂😂
Vlogs are always better when Alberto shows up.
@oliversantos3161
6 жыл бұрын
jay west facts.
@jakethesnake972
6 жыл бұрын
I have really been enjoying Big Boost content, even more than LZ
@jimrogers8105
6 жыл бұрын
i like him
@callum345
6 жыл бұрын
Alberto puts in work with his video's! Meanwhile Adam, the lazy soppy bollocks, films nothing and gets the benefits.
@VileNights
6 жыл бұрын
jay west literally I thought it was just me
Adam had it set on M for mishimoto and Alberto turned it to W for Wumbo
@vanderslammerful
6 жыл бұрын
braxton irvinn wumbology. It's elementary
At first I thought Adam was coming out with his first mixtape 😂😂
@HumpingBunny
6 жыл бұрын
biviano toledo he already has.. 👀
Dude, love these videos. Shows how much you can learn on cars when you just drop in and do it.
Intro 😂😂😂
@Jeremy_Hill_2020
6 жыл бұрын
Timmi.DhTrip xD
@deanohasajob
6 жыл бұрын
Timmi.DhTrip he did that on purpose cuz sometimes he does something wrong while editing and then the same part plays twice
@Jeremy_Hill_2020
6 жыл бұрын
Timmi.DhTrip I wonder how you got more likes than me...
LOL I like it when your just working on your cars. I love seeing peoples set ups and what theyre making improvements on.
Alberto such a G for bringing that! Big Booooost
Sweet work on the Z. I'm always going to suggest you boost it. I saw a Turbo kit for them. Especially, since you have Big Boost with you!
@charliesmith874
6 жыл бұрын
He wants to keep it simple. I know turbo kits are relatively simple and maybe he will turbo it but he doesn't wan't it to have power gains on other stock(ish) cars as when your friend has 250bhp and yoou have 350 its kinda awkward
I was watching this video and my 19 month old niece walked in and was mesmerized by you and when the montage music started playing she started dancing 😂 looks like you got a new little fan
I just realized it all makes sense, LZ, 350Z. Adam needs cars with Z's in their model name
@justinzhng
6 жыл бұрын
FredWasHere what about the bmw and the s13
@AwesomeCanadian212
6 жыл бұрын
justin zheng it was actually a comment on how he was making the joke of just getting all 350Zs
@kittscuinix6785
6 жыл бұрын
FredWasHere ...all he's missing now is a JZ 😂😂😂😂
@tamastenhaaff2291
6 жыл бұрын
Now just hope that he wont build an ls z240/350
@theproxymoxie5140
6 жыл бұрын
FredWasHere LZ is his last name. I may have it off a bit but it's something like (Lizotte-Zeisler) I probably have spelling wrong but either way LZ is initials
Both these cars are great looking wish I had one keep up with the good work
Got a piece of your merch and some stickers! Love ur content and the team and cars of course! Awesome stuff!
Can’t get over how nice the Z looks 😍
Man o man the videos keep on coming with same awesome quality 👌👍😎🚗💨
Love how the vq35 has the exact same 30 year old intake manifold and fuel rails as the vg30
I honestly had no idea you loved drifting😂😂😂 love the vids man
Once you do those sensors don't be surprised if it throws off the throttle body. I had to take mine to the dealership for a re learn.
I really like these types of videos keep it up
Thats dope shout out from nyc keep up the good job.
Glad they are both getting fixed for more drift videos mate👌🏻👌🏻
Heat up the door panel with a heat gun and slam it closed. Always done this for my cages and if you need extra clearence slide something with a low profile over the cage beforr slamming it closed!
Keep up the awesome vlogs!
Every night i wait till 2 30 am to watch his vids. Love from Pakistan
I want Alberto as a buddy he seems like a great friend and genuinely nice :D
@tunanocrust5670
6 жыл бұрын
scottyL842 listening to Avril Lavigne radio 😂🤣😂
I love the intro
I had a random missfire in my truck. It was caused by a hole in my intake manifold gasket. Usually a random missfire is caused by a vacuum leak like I had or a bad coil pack/wire. Most of those sensors will throw a code if they are failing or starting to fail. Also if its not throwing a code for the random missfire it probably isn't happening too often (I haven't driven your car so I don't fully know). The code for a random missfire will show up when 2% of all the fires are misses which isn't a lot. When your check engine light if flashing it usually means more that 10% of all the fires are misses. Hope this helps
You are the best! ✌
What up Adam !! You’ve attracted me towards 350’a but I live in San Diego and there aren’t any tracks really close to me so drifting would be a meh for me. I still want a 240 to make into a show car because honestly, showing up to a meet in a 350 isn’t as fun as showing up in a 240. I still hope to win the cream z though!! Keep it up Adam!
Love your videos
You may be able to carefully heat the door panel in the area of contact then close the door to let it form to the shape of your roll cage
Starting off having a bit of a fit mate might wanna go see the doc
@thamerendyck1795
6 жыл бұрын
Clutch Kick Junkies adobe premiere Tourettes?
@baconbacon332
6 жыл бұрын
Yea
@azenxr6556
6 жыл бұрын
Clutch Kick Junkies I watch u m8 that’s sick Nice r33 btw fuck yeh australia
@seanunwin9805
6 жыл бұрын
Lol
*Rip Nicole’s head gasket :(*
@kylec5755
6 жыл бұрын
Fck up
i loved when adam was looking at the radiator braket and he said it was rad
Love the channel
I hope the Nicole’s car is OK my fingers are crossed and praying for you guys🤞🙏🏽😊
You ever think about doing an MR2 pump for your power steering? If you're having so many issues with the seals blowing out, might be due to prolonged high pressure while drifting. Between the higher side load of mad skids, and the sustained high volume from the pump spinning so quick, I can see that wearing the seals quickly. Electronic pump would maintain a stable pressure, and possibly longer rack life. I'm no engineer, but I do break things often. Food for thought, love the content, keep it up.
Alberto is such a good guy!
"Dont Let us Down JZ" I felt Like I should give you energy like the spirit bomb
SO CLOSE TO 2 MILLION SUBSCRIBERS
Love ur vids man
Just FYI, the Z’s are known for killing non OEM sensors, the cam sensors especially. They typically only last a few months or so. I’ve had the same problems on mine.
Get a soft bristle brush and clean that radiator up a bit befor things get caked up in between the fins and. It doesn't work as well. Make sure to go with the grain of the fins
Great video today! (As always)
Knock sensors have a tendency of going out a lot on those cars. I would recommend relocating the sensor to avoid pulling everything off every time
Loved the video
Love the new intro
Alberto had my dying 😂 we’re gonna start by setting the lz car on fire 😂
Street faction makes door panels for the s13 and s14. Also A different company makes carbon fiber door cards for the s13 and s14 and which you could cut to fit a roll cage and just add a piece of carbon fiber again inside the cut door :)
Fingers crossed
That filter location is convenient till a tire or cone is ran over.
Love the sr20... But if/when it blows up before 1 or 2jz look inti the qr25de they make reliable hp and are 4cyl. Love the channel bro
Also, Hit me up if you want me to repair the gaskets for the valve covers. If they are still squishy they can be resealed to continue to work.
U made my dream car come to life
I work at Oreilly’s and I love always seeing how you always have the commercial receipts. Makes me wonder if you have your own account!?
Alberto’s just a good guy!
Chris Forsbergs original 350z comp car was sr20 powered
Heard before to mount that knock sensor in an easier spot to change out.
Adam reminds me of this girl I used to talk to in highschool when she was in her emo phase. The constant "grrrrr"s when he's frustrated just triggers that memory in my head lol
I made the mistake of not replacing my intake gasket when I did my knock sensors. Had to break it down all over again lol
Thanks so much for all your videos, always looking forward to watch them. What camera and what editing program do you use? Thanks
ITS LIT!
You should pick up the OBX Individual Throttle Body for your Z would be a cool mod!
the cr kais would look dope on the cream 240
It’s not an Adam LZ vlog without the editing fails
@Shadow0fd3ath24
6 жыл бұрын
JT Suarez this time it was on purpose at the beginning. It was a reference to a top comment on an old video saying he needs a "triple clip" so he said he would
if its a random mutltiple cylinder missfire, most of the time its either the knock sensor or coil packs, so if you get this issue again i would go straight to replacing all 6 coil packs, happened to me with my z and ive seen it on multiple vq35de equiped vehicles as i am a certified Infiniti mechanic
Work work work work work !!!
love your vid
You should get an intercooler since you have a turbo setup and you beat the crap out of it.
KZread drifters graduated from miatas to 350z's lol we got Taylor Ray, Adam LZ, Mattheginge, Damian, Cam's pro chassis haha hell yeah
@albertohecher4954
6 жыл бұрын
eel1331 Yeah, Cam...
Try heating up the plastic and when warm enough to bend slam your door against the frame it will shape the door panel.
Cool video Adam
Nice beginning😂😂👍🏻👍🏻
That up with the beginning
it's usually the knock sensor wire that is the issue the sensor itself is usually fine but better to replace the sensor while changing the wire...
Short or long videos I enjoy them regardless
Hey Adam on the give away 350z you should really consider installing a catch can on it. The engine tends to suck in oil through the pvc systems and from how gummed up the intake looks in the video the car needs one.
Aye love the videos keep up the good work
Hey adam! Almost 2mil!
awesome video
Love it
we out here
*Nice. Nice int-. Nice intro!*
3 times what's up🙌
Yesss finally
You should do something different and put ITB's on the Z. It sounds amazing!
That intro tho! 👌
Hopefully you replaced the wiring harness to the sensor. a good 90% of the time its the wiring and not the sensor that fails. The wires get brittle over time from all the heat cycles and degrade. Just did the same on my 4runner.
The starting tho 😂😂
So I've heard some things regarding oil filter spacers/sandwich. Some people say that they can lower your oil pressure. Other people say that there is no harm with running them I would like to see what other people have to say before I order one for my SR. Thanks guys!
i find it funny that adam is barely scratching the surface of rc drifting lol he already owns a rwd d4 but prefers the awd traxxis. really all he needs is someone with a good tune for the d4 and just follow that exactly and it will run really good. My d4 is getting close to that good handleing stage just a few more changes like a prosquat rear and a hybrid stpring mono and should handle better.
i think street faction makes so decent looking door cards
The intro 😂😂
@andibregu3659
6 жыл бұрын
Wwww wwwwww What's up guys 😂😂😂
@Jeremy_Hill_2020
6 жыл бұрын
andi bregu xD 😂😂
that knock sensor for the 350Z looks to be the same exact one as the LS2 knock sensor for my motor lol
@DubstepEnjoy
6 жыл бұрын
It reads different values, most likely
Oh so that's where the legend is.... I thought you sold it😫
Finally!
double clip squaddddd
That intro😂💯🤙
@Adam LZ, are you going to the OSW drift event on the 25th this month? it would be really cool to meet you and the whole crew. I'm traveling in all the way from Colorado Springs, Colorado and i was really bummed that i couldn't make the car meet in Denver. Just wanted to know if i would get to see you and the crew, it would really make my trip. Thanks XD