Vince does a REAL refurbish job on things he fixes; unlike Game Stop and other places.

@oliverer3

4 жыл бұрын

I got to replace the battery in a friend's phone yesterday and it had previously had the screen replaced at a professional repair place, I found 6 screws loose in the phone, a ribbon cable routed on the wrong side of the EMI shield and multiple screws in the wrong holes. I was astonished. Point is don't expect someone to do a better job because you pay them to repair something professionally it just means they're under more time pressure.

@codykarstedt2695

3 жыл бұрын

Its so calming to watch him clean the ps4

Nice work Vince! Great video.

@Mymatevince

3 жыл бұрын

Much appreciated Steve :-)

If you ever needed a reason to NOT smoke, then the state of this console should be it...... Good job Vince!

@sheppardpat47

4 жыл бұрын

This console is mint compared to mine holy shit Bought a PS4 from a guy that smokes and it was nasty, the fan had fur on it!

@mrcyborg9216

4 жыл бұрын

sheppardpat47 lol

@bulwinkle

4 жыл бұрын

@@sheppardpat47 you smoke menthol ones then?

@sheppardpat47

4 жыл бұрын

@@bulwinkle I don't smoke

@bulwinkle

4 жыл бұрын

@@sheppardpat47 it was the mention of mint, I was joking.

After I've unplugged the mains, I always power on any electrical devices to drain the caps before opening. It's a good rule of thumb.

Finally a new PS4 fix 😁 I am looking forward to read " trying to fix Ps5 not booting up" 😂

@therealtrip9723

4 жыл бұрын

Same

@djkaylar454

3 жыл бұрын

Same

@RanaRandom

3 жыл бұрын

Planing ahead 😂

@TabishJamalV

3 жыл бұрын

Sony Corp disliked your video

I personally prefer watching your longer videos. i like to see exactly how you solve it I just like you like striping things down trying to fix it not always successful and also a beginner to these things but your videos have given me confidants to have a go thanks for that and can't wait to see what you fix next

My brothers PS4 which was a launch model held so much power it would actually start to turn on with the light and everything for about 2 - 5 seconds and then shut off. Crazy how much power them caps can hold.

Great job =D You may get that laser working by soaking the laser assembly in IPA (for like 2 hours) ! Sometimes smoke or dust does get inside the optical path!

@marcianzero_yt

4 жыл бұрын

Really? I frequently have white residue when cleaning stuff with too much IPA. (99.9%) I do have a laser from a smoker´s PS4 still in my basement. It works intermittently. Will try to do the IPA bathing and see what’s coming out of this.

@GadgetUK164

4 жыл бұрын

@@marcianzero_yt The white residue shows there's either some contamination on the thing you are cleaning, or the IPA is not as pure as its made out to be! IPA should just evaporate leaving no residue at all. The other possibility is its reacting with what you are cleaning.

@Mymatevince

4 жыл бұрын

Very good idea Chris. The replacement laser has arrived so I might do a revisit vid on this faulty one and see if it can be resurrected. If not I will fit the new one. Cheers mate :-)

@averagegamer9975

3 жыл бұрын

@@Mymatevince I repair consoles for a job and I've found that if a laser is exposed to smoke and nicotine then cleaning it won't help, the laser will of been damaged already so just Install new one and save time

@CreepyVibesCentral

3 жыл бұрын

@@averagegamer9975 i have a few xbox ones that wont read discs, should i swap the daughter board to a new drive, or just replace the laser :)

Hi Vince, great video. I have a tip for removing light scratches on plastic. I use brasso, the tin with the wadding, and I lightly polish the area with the wadding and it really works. If you do it on painted surfaces you have to be extra careful that you don't go through the painted surface. I've used it for the many boomboxes and tape decks I repair and they look great. Keep up the great work my friend. Kind regards. Paul.

Thank you Vince. I always love watching your trying to fix console videos and all the trying to fix videos. Way to improve my weekend with one of your videos. Again thank you.

hey, your getting better at the music. Even though I like the classical music this is a nice refresher to your vids. Looking forward to the next 1hr long trying to fix videos.

im actually thankful my launch model ps4 has never had any issues. nothing replaced etc. only thing ive had to really do is change the paste and clean the heatsink. i lubricate the fan everytime i open mine. sounds super quiet today (edit: its also used on a daily from watching tv, youtube or netflix to playing call of duty or gta)

Big props for going the extra mile in cleaning out that fan, I know how much of a pain that can be.

Hi, I just wanted to say that you are doing an amazing job of fixing electronics. Good job! You are also keeping faulty electronics from landfill. Thank you.

Sweet video again Vince! I just replaced the digitizer on my dads iPad Air 1 not sure if you have done one I’ll have a look! Took me a couple of hours but all works thanks for the inspiration! All the best!

I totally love watching your Videos 😁 Hello from Germany 😆✌

Nice fix :) Great example of the method, that even if something initially looks unfixable, it's always worth checking, if it's just a simple problem anyway.

Just thought I'd say a great repair as always Vince. People love the PS4 videos, you should definitely do more. You'll find as you go on you'll start finding some pretty nifty tricks to repair them. Keep up the good work bud 😏

Awesome as usual. I like the Switch and PS4 vids, but others have been for the most part interesting as well :)

so pleased i gave up smoking 8 years ago. I cleaned 2 ps4 lately and it was just dust not that horrible tar crap. I feel for you Vince.

Aww man it gave me the noti a day late.well the first vid of the day starting off great. Gotta give my eyes and technology filled brain breakfast.

Hi Vince .When i clean my computers and game consoles I take them over my garage where I have a small compressor. It's much better and removing all the dust especially from hard to reach places .It's easier and quicker to use a brush everything down and blow the dust out. Its brilliant for the fans where the brush just loosens the dust and the air blows it off.I always hold or secure the fan blade to stop it spinning when blowing them out as you can break the blades if the fan changes direction suddenly when you blow it out. The dust that comes out of fan cooled power supplies is unbelievable. I find the minute you use something damp ,like a wet wipe on the fans, you have to go over every part of it multiple times to remove the sticking dust. If everything is dry and you just use a brush the air takes it straight off.A wipe down with some ipa after dust is removed and looks as good as new. I know there are warnings about static electricity caused by moving air etc but I have been doing this for thirty years and have yet to have a problem. The only times I had a problem with static is when I forgot to ground myself by touching the case etc before working on a pc. Must have built up static from walking on carpet, buggered a graphic card up, happened twenty years ago, lesson learned and have never happened again.Thanks for the video mate.

Nice can't wait to watch this. I've got a BLOD coming out soon that you might find pretty useful

Nice Video Vince. Well diagnosed. Mixture of skill and luck. I like it.

Wow, very thorough job cleaning it, well done.

When Vince at the start was taking off the power supply and was unable to I was just screaming THE WIRE MATE 🤣

Great video and content Vince.

awsome ! :) dont shorten your vids vince !we all love it when they are 1hr plus ! lol

It’s very warm evening for a fix

@kajuss5122

4 жыл бұрын

its definitely warm

Cool video man keep up the good work!!

Idk how you have so much patience with that power supply if it was me I’d put a screw driver and pull up as hard as i could after trying for 2 minutes😂

Hi Mate, Quick Question My amazon echo 1st gen I got yesterday off a family member. I couldn’t set it up with my iPhone. So I did it on my laptop. Once set up I used gave it some questions. No answer. The ring light lights up when I talk. I think it is a speaker fault. I am going to try open it today to see if anything is damaged or unplugged. Thanks Jack

Hi Vince hope you're having a good day! :D

@aaaaea9268

4 жыл бұрын

What a wholesome comment

Vince, don't let it update. I guess it's on a low firmware. At the moment you will get more for it as is 😉. Thanks for another awesome video . Take care 😀

Good stuff. You have to lever the LSH of the PSU up first. If you lift the opposite side first it is actually quicker reseat the whole thing and start again. PS 'temporary' washer fix still working 2 years later...

Quick question which is better to use on a ps4 a shop vac or can of air to clean the dust out of it.

An ultrasonic bath would be handy for all the cleaning that you do. Most parts including PCBs can safely be cleaned in one, you just need to be careful about nylon and rubber parts which are best cleaned by hand and you need to be sure parts are fully dried before reassembly. It would save you a lot of work.

I'm quite thankful that my PS4 still works

Blimey! Are all our Ps4 fans so dirty?! Great video Vince! 😊

nice video as always

Nice video. Maybe you can try and build a pc on your own I would love that video. You are a great yotuber

@MyMateVINCE Hi there! i have this ps4 controller and it's got like damaged spike parts near r3 button, so basically it looks like my controller has been chewed on, i was wondering can i use sandpaper to make it smooth? thanks

Thank you for the help :)

Loved the video but would love to see a few 1hour plus videos the longer the best I love em :)

Great Work Man! Keep Connected!

Unfortunately the beauty of fast forward x20 means less Vince time. Maybe it's just me, but I prefer more Vince over less Vince.

@TabishJamalV

3 жыл бұрын

yeah. it felt like we missed details

Hate ebay never can trust any seller really. Well done vince and well cleaned

Thank you for the video. Very entertaining as usual. But I hope you don't start to fastfarward throw al your videos! Even if you don't come to a conclusion or a fix. it is fun to se you disassemble a laser just because that's what you and me do. Fix what you have some time you are successful some times not. Journey is the goal. A quick version is like a good adult film but some times it is good with a full romantic comedy. Thank you once again!

I miss the break out board days of testing and diagnosing faults.

Nice work Greetings to you from Egypt

You can remove the top plastic of the laser. Try cleaning the lenses from there. It's hard and requires a bit of careful prying with the cotton swab. I fixed one with similar issue just like that.

Military: Our nuke isnt registering to our computer Vince: *hold my beer*

@rays7437

4 жыл бұрын

LOL

@AlexStroiescu

4 жыл бұрын

Hello everyone and welcome back to another trying to fix video. Today, we're going to try to fix a Military Nuke. .................. Allright, let's test i..... boom!

@hair4022

4 жыл бұрын

@Hair No I'm hair

@hair4022

4 жыл бұрын

@Hair I feel like your tried to type in "Hair" when making your account

Metal spudger into PSU. You are one brave man.

EPIC fix! Cleaning fix that is..

I have come across a couple of PS3's that don't read discs. It's usually the older models but even the revised one. The cheap top loading ones seem to be ok. I even have a 360 that freezes when playing through a disc after a few minutes of playing.

Thank you Vince

I legit thought for a minute you were going to fix it by cleaning the mirrors. I still feel like if it wasn’t so hard to test your fixes at that level you could find the fault.

i gotta ps4 yesterday but its a blod will a new board fix it

Hi Vince, nice video.😊 I have a broken ps4, that i think would make for a good fix it video for you. What's the best way to contact you? Love your content.

Too funny you posted this I just finished diagnosing and partially repairing a PS4 Pro. Had a faulty hard disk which I replaced then got an error when installing the firmware that pointed to fuse F6202. Removed the fuse and bridged the connection temporarily with an extremely tiny jumper wire (~2mm) and the firmware could be reinstalled on the new hard drive. The disc drive had a bend in the top plate so I bent that back into shape and it will take discs in but can’t read them. I’m wondering if I can get that fuse and replace it if the disc drive will be able to read the discs. It loads and ejects just fine. A new fuse here in the US is about $14 after tax and I don’t have a reflow station so I’ll have to pay a local shop about $10-15 to do it for me but I think that would be worth it to get the disc drive fully functional again. What do you think?

@MyRegardsToTheDodo

4 жыл бұрын

It should still work, even with the bricked fuses, I did that too on two PS4 Pro (I just used some solder after I clipped off the fuses), both work fine. If it doesn't recognize disks it could either be a faulty laser or a bad ribbon cable/connector, I had both on separate PS4s.

would you consider doing a faulty original xbox, gamecube or ps2?

Where the metal springy bit go from underneath the APU clamp?

Hi Vince, I have the exact same issue(first time light for 1 sec 2nd time nothing then repeat) minus the disk problem I tried fiddling with the sockets that receive the prongs for good 20 minutes inserting and removing power several times. I thought I was doing it wrong so I temporarily soldered wires on each prong and inserted in the sockets(continuity checked ok) still no luck. Inserted multimeter probes alongside wires in socket and I saw it supplying 12 volts for a sec and then off. Fan moves a little than stops(just like ur APU blod ps4 video). Any tips? I really love ur videos by the way they are very informative really appreciate your honesty and your step by step approach.

To clean the inside grooves of fans, you should get those thin interdental brushes or a floss brush.

The two prongs that connect to the power supply are known to be really very stiff and hard to separate. One just has to wiggle and pull on the PSU on the side of the prongs for a while. No way around it.

Lasers in optical devices are *extremely* sensitive to static and are often unknowingly damaged by simply being disconected. In order to protect laser diodes during handling, there should be provision for 'shorting' the laser, more often than not this can be found on the ribbon cable itself as a couple of exposed copper 'pads' which can be 'bridged' by a blob of solder. This should be done BEFORE removing / unplugging any cables. Hopefully this precaution has been done with your replacement and if so remember to remove any 'short' AFTER plugging the ribbon cables back in. It goes without say to be extra carefull regardless not to touch the ends of any ribbon cables. Hopefully your replacement won't have already been damaged this way before you get it.

Thank you...thank you..you save my life..my ps4 have same problem..and fix now

great fix

I have an original Xbox that has a problem with the CD drive The previous one I had had a mechanical issue with the disk drive and when I remove the disk drive it started blinking red and A warning on the screen appeared And when I connected it back the warning disappeared and the Xbox worked normally except for reading discs The other Xbox when connected To each disk drive thinks that there is no disk Drive connected and the fan doesn’t spin i’ve swapped the fan with a working fan and it still doesn’t work I swapped the hard drives I swore I swapped the disk drive to another Xbox and just it’s still doesn’t work And when I Open the disk drive and plugged it in the Xbox It didn’t stop spinning and when I insert a disk it didn’t read it 90% sure that the lasers burns but the disk drives for the original Xbox are pretty rare and buying another Xbox is like a buying a heavy paperweight so can you tell us how to swap the laser

Hi Vince my Nintendo Switch joy-con has a drift want do I have to do to fix it

@rays7437

4 жыл бұрын

He has a couple of videos about joycons. Just go through his video list. If I recall correctly, it's a fairly easy fix.

@Charlie0106

4 жыл бұрын

You can use canned air under the flap ok the analog sticks or use contact cleaner. If that doesn't work then you can replace them with a stick bought off eBay but you'd need to replace it. But you should send them to Nintendo first instead of trying to fix it yourself unless you're out of warranty.

Can someone please tell me what the artist/track is that is playing at 26:00 ??

Good evening everyone from wellington Somerset in the UK

@michaelpatton4593

4 жыл бұрын

G'day from Spokane Washington in the US

@mefflecakes

4 жыл бұрын

Hey now from Needham market, Suffolk in the UK 😄

@decm8

4 жыл бұрын

Good morning from Somerset, Highbridge burnham on sea hahaha

@Furious-gk2cz

4 жыл бұрын

Good morning from Bangladesh Dhaka

@CasSpell

4 жыл бұрын

Good afternoon from Norway

I kind of jumped when the beeps happened as it was unplugged.. I was checking my computer and phone. wtf! LOL

By the way I had the Samsung just drive in the first Xbox and in the second one I had the Phillips disk Drive I need your help please tell me what to do

when i turn my fatty ps4 on it beep once then turn of is it blue light of death?plzz tell me

Hi Vince.. Do u sell all the consoles u fix? I'm all the way out in South Africa...but it would be epic to own something that u personally worked on.

The two prongs under the power supply was bent by the perso who take it apart before, i had a ps3 slim with the same problem, bent connector and stuck power supply.

When you flipped the laser assembly over there was a silver cover. I need to take off that silvercover there's a mirror underneath that that's probably just dirty

I have a similar issue with blood on a ps4 1001. The light turns on for 2 seconds and turns off. There is no fan spin. I found roaches in the system (got it off ebay). They were mostly in the psu, so that leads me to believe that the system needs a new psu since the fan does not spin within the 2 seconds. I ordered an new psu so hopefully that fixes it. If not the HDMI port is damaged so im going to remove that and check again just incase an HDMI pin is bridged.

As lasers get older they use more power which causes more heat. The focus is done by a "voice coil" that gets hot and looses its ability to hold the laser up. The result is sometimes you can adjust the focus to get it working but will not last. Sorry this is a bit poor explanation but its the jist of it.

Vince, you have a video that you fixed the laser chanced the ohms from some resistor... in this ps4 you could not do the same?!? the ps4 dont have this 'option'?!?!

@MyRegardsToTheDodo

4 жыл бұрын

If you do that it won't be a permantent fix, the laser will burn out eventually (if it even works again), so a propper fix is to replace the laser.

I’d like to be convinced there was an issue with the laser by seeing the “good” PS4 running OK with the new replacement. You never know😱😱😱

Looks good

This is what i'm talking about. Thanks.

Hope you steying safe

Finally you fix a console

Could you try fixing a ps3 slim with faulty Bluetooth?

this is good

STEVE FROM TRONICS FIX YOOOOO IM A BIGGGG FAN OF YOU!!!

normally for a disk problem (This only occurs with my copy of Far Cry New Dawn), is that it makes a few noises, refuses to read, and stops, I have to hit the top for it to work

Good vid

by using a USB-C extension cable, could you play a nintendo switch lite on the tv by plugging one end of the cable into the dock and the other into the bottom of the switch lite?

@matteo1764

3 жыл бұрын

He did a video about that. It's impossible to play the switch lite on the tv, even if you use the original dock

@billygray6776

3 жыл бұрын

@@matteo1764 but with a usb c extension cable?

@matteo1764

3 жыл бұрын

@@billygray6776 yep

Oi mate, that’s all well and good. Brilliant repair. But bloody hell, take the old laser to bits! Lets see the mirrors! Destroy the old sled bruv!

Hay can you show us how to link a nintenfo account with the qr code

if there is a potentiometer (1 or 2) near the laser try and adjust it. It may take some trial and error. Sometimes it works 😜

Anyone know how to fix flashing red light please i clean my ps4 regularly as that is one cause for red light and I've done the heat sink paste I tried everything I can

@itzzjok3rzz208

4 жыл бұрын

what paste have u used?

There is three for the blue color amd white only has 1 and orange has 1 ive got a 5.05 same model actually that has a fault in board and it has infinite blod either there is a fault in the hdmi or the chip that renders the image because when it gets powered on it pops. This is the first PS4 ill be trying to fix normally I fix xboxs because I've never had good luck with Playstation

I wanna send you something to fix how can i do it?

26:28 this is why I think USB ports need dust caps, they can be left unused for a long time and fill with dust and then something plugged in and the dust gets jammed further inside

@slimsketchy1489

4 жыл бұрын

Yeah.... I removed a lot of gunk from my used ps4.. Cat hairs dust etc etc

how d you clean that crap without gloves, id be feeling dirty for weeks touching that