I’m a simple guy. I see title with “muffler delete”, I click

@ivanrochagonzalez626

3 жыл бұрын

this comment couldn't be any truer

Sixteen year olds watching this :👁👄👁

@tylergares8794

3 жыл бұрын

Aye I actually the like the sound of my flowmasters on my 86 c10

@noahbaker4152

3 жыл бұрын

15 year olds watching this😁

@skateboardingprogression6008

3 жыл бұрын

Hey man its not a faze its a lifestyle

@alfonsoornelas7085

3 жыл бұрын

@@noahbaker4152 yes 🏃🏾‍♂️😂

@tylerfeatherston7401

3 жыл бұрын

Shit I’m 27 and I still will cut one off of any V8😂

Muffler Deletes are perfect. Not too loud, but loud enough for you to enjoy. It is a sweet spot into making your car louder. I deleted a muffler on my 1992 4runner V6 and it has a unique sound now even for a V6. It has a deep idle, and at around 1500 approaching 2500 RPM's it sounds like a roaring V8, but once you hit the 3500 to 4000 RPM range then you can slightly hear the V6 note that every 6cyl engines make, but it just sounds unique like a bass Amplified Nissan 350z mixed with that 1st gen cummins that passed by at 9:43 . Mainly because every catalytic converter has their own special design, and every header and engine crank has its own special design too, so all that can make your car sound a little different than expected. I love my unique sounding V6 4runner, but really I can't wait to try this on my Tundra 4.6L V8 🙂

Sounds descent for a do it at home mod. I love these old chevys.

@gunnarmoore9982

3 жыл бұрын

Glass pack it

@peter2213

3 жыл бұрын

Yeah when chevys were actually good But then again every truck was pretty much good from the big 3

@josephbragg1162

Жыл бұрын

@@gunnarmoore9982 I have duel glass packs on mine and it sounds amazing. Turning heads for sure. 😆

Big fan of the more frequent uploads bro! No cap you could do a fuckin radio talk show, voice is soothing/not annoying unlike a lot of KZreadrs

Dude this is legit the best sounding truck I’ve heard in my whole life

I love that sound. Makes me miss my 97. Give me nostalgia feel

Got a Chevy 98 z71 5.7 cats cut true duels straight piped no muffler or anything backpressure love it

O my god the sound is sooooooooooooo smooth and deep like a low hum or a growl. I love it! Chevy 4 life❤️🥰😍

Sounds great. Not as loud as your other trucks. Just perfect 👌

Nice! I did something similar with my 2000 C3500HD (7.4 Vortec). I deleted the two cats, and replaced the factory muffler with a Flowmonster straight-through muffler with two 3'' inlets and two 3'' outlets and then turn-downs right behind the muffler. The muffler has two individual perforated pipes that are surrounded by packing material in a stainless steel case. Holley owns them, along with many other brands including Flowmaster, Flowtech, and Hooker.

@TrippyWoodStock

Жыл бұрын

Dude just stole the idea I had 😂 straight through mufflers 4 life! 🤘🏻

Those factory exhaust on the older Chevy's are made of quality steel they last a long time I still have the original on my 98 1500 its showing its age but for being a Canadian truck that's darn good

I have a 88 Chevy 1/2 ton 5.7 350 V8. Deleted cat 3" pipe into a single inlet 3" dual outlet flowmeter and it sounds pretty good. Love the k1500 series. Best trucks ever built.

I've got a 97 4x4 Sierra like this with a 350. I have 2 1/2" true duals, no converters with mac Flowpath mufflers, 2 1/2" tailpipes exiting out the sides and it sounds absolutely Amazing..

My buddy has a 95 with the 5.7, he's running 2 and 1/4 pipe all the way back no cats and cherry bomb extremes. Its got a really deep tone and its loud when you want it to be. And it claps

Earl gone sound really good when you get them tru duals .

I’m totally about to do this in my 97 GMCZ 71. I got a leak on the driver side inlet to the muffler and just sounds horrific and my son‘s got a 98 Silverado, his first vehicle. And his came with a custom true duels set up that came out just before the rear drinker side tire and it’s what I wanted to do with mine all along. he bought his that way so I’ll have two very loud OBS trucks in my driveway soon. Thanks for the video as I didn’t need much of a push in this direction in the first place lol. Your video solidified it in my mind

Great vid! Love your channel. Honest, real truck page that is the best of its kind on KZread.

@lmfscrew

3 жыл бұрын

Thanks!

Have an obs. Cut mine in the same place then made a y pipe and dumped it out in front of the wheel on the passenger side. Love it

I have a 1994 for my first car and I’ve never known what the exhaust setup was on it and I think this is it because it sounds exactly the same!!! Thx for the help lol

Just something about those GM motors. I just had a y pipe dual set up done on my 14 Sierra 5.3. It’s got that damn 3rd cat and I didn’t want to mess with them and have check engine lights and problems. Y pipe after the 3rd cat then straight pipes out the back. It sounds fantastic. Not crazy loud but if I let it rip a little you can definitely hear it. Thanks for sharing the vid.

Glad to see someone who appreciates the chrome fender trim. It makes the obs if you ask me

@amishadowbanned6264

Жыл бұрын

Exactly!

@MartinGonzalez-sl2kj

Жыл бұрын

💯%

Took o2 sensor out and messed up threads, Waitin on fix, and it sound just like that with out cutting the muffler off. Good ol exhaust leaks 👍🏽

I did this to my Chevy vortec 350. Honestly for a at home job it’s the best exhaust sound u can make for simple cut your muffler off. Why mainly cause the thing I loved about these trucks is u cut the muffler off and u instantly had true duals. I have a tbi truck too and when it was stock only place it’s true dual is before the one single cat where it y pipe from the manifolds. and u would have to cut it way up there and than get unsafe fumes in the truck it wasn’t worth it. This still at least gets the fumes out behind the cab Everybody different only thing is the pipes are 2 inch up front on the vortec. All depends on what u like if u fill the rest of the exhaust in with 2 inch it will be loud as hell assuming U delete the cats too. Smaller exhaust is louder! But u dot have to have all the same size you can actually make it bigger in the back to soften the sound it will still be loud as hell with bigger pipe without the cats too but jsut not as bad as the small pipe. or just redo the whole system with bigger pipe if u want more mellow sound yet specially if u still have cats

Damn impressive. Not surprised. It’s a CHEVY!!!! Like a Rock!

Made me smile the entire time!! Did this exact diy to my buddies 96 and it sounded the exact same. Too bad the new owner put a factory exhaust back on.

Throwing the reps on the obs would look clean as hell, if you could make that happen in the future that’d be fire🔥

Love the truck bud. I have a 99 k1500 with the 5.7 as well. I'm running no cats and a muffler (dont remember the brand) but it's still pretty loud yet, but not insane loud lol. It's got a little rust here and there, I'm also gonna do a whole frame restoration on it after college.

I got a 94 yukon with the 350 tbi not vortec like yours but I love the magnaflow sound on mine I have hooker longtubes and no cats and I love it

Get true dual straights and out in highflow cats, those things are huge.

@julianscott6932

3 жыл бұрын

Or run no cats and glasspacks

@NathanKirby2001

3 жыл бұрын

@@julianscott6932 i would run no cats and magnapacks

@julianscott6932

3 жыл бұрын

@@NathanKirby2001 same thing basically

@AyyItsJk

3 жыл бұрын

Who needs cats?

@NathanKirby2001

3 жыл бұрын

@@AyyItsJk pussies

Done it to my old 89 obs and loved it, then I done it to my 05 GMC 6.0 because the exhaust is set up the same way and it was obnoxiously to loud lol.

I chopped my muffler off and just connected like 3 pipes from auto zone too replace it and it sound nice

I have the same truck in Colorado. truck came from Montana with NO RUST. 1999 Chevy k1500 3dr LS all options 243,000 miles 5.7 liter and rebuilding it inFort Collins at Chevy dealership. Was made in dec. of 98 and is a 99 model.

I gotta 99 Silverado 1500 I had the cats cut off and put flowmaster super 10s on it sounds good IMO. That obs sounds decent with the pipes cut off!!

now just have exhaust shop finsh running the duals back with some tips!

Just got a 99 Yukon. Definitely doing that, may have some drone since the whole thing is the cab but ima start there

Sounds nice for a homemade quickie

dude Neosporin is magic it works so good and fast

I did that to my gmc Sonoma 4.3 and it sound pretty good

It's sounds awesome. Like it means business

Sounds good. If you remove the smog pump it will stop the popping or backfiring. Its caused by the oxygen being pumped in the exhaust from the smog pump.

That opening shot!!! ❤️❤️❤️ 😂

I had mine cut off like that with turn downs. When it’s cold the first major take off it will clap a little bit I would recommend putting straights turned down to the corner of the bed kinda how newer trucks are done has clap but not Excessive with cats

Damn all that pressure cutting boy.. put a fresh blade on and let the tool do the cutting..work smarter not harder..less injuries..enjoy the vids keep it coming

I have the same truck but mine is white with burgundy interior. My exhaust is the same but I have no catalytic converters and my pipe comes out the back duel style with 2 glass packs and it turns heads for sure.

Personally I don’t like the cut muffler sound. It sounds wet and it’s not my thing. I do however, like the 5.7 when they’ve got a good exhaust job. I love the sound catless straight pipes give off and even catless glass packs. I think the Ford you have has a great sound right now as it is.

Larry got some stance now !

Channel locks work great for disconnecting those exhaust hangers

It sounds good cause you were smart enough to leave that cats on. Cut the cats get the claps 😂😂. Dope truck

Glass packs always sound good on the 5.7.

Can you please do a driving video of this truck? It reminds me of my grandpa's old OBS he used to have! I miss that truck.

Good job . I love it

Omg that thing is mint 2yr old vehicles are ruster where I live

Did anyone see the two people fighting with swords at 9:16 ? Because I almost died when I saw them 😂

@Vr6.christos

3 жыл бұрын

😂 yeah it was hilarious

@dillonhutchinson5678

3 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣

@cadebennett4697

3 жыл бұрын

You have a good eye!

your trucks clean af compared alot of 90s Silverado in minnesota lol

I have a 94 c1500 and this is all i needed to see to do this😂

rip sawblade. thess GM exhaust are great. super durabale. VS what they used on TBI model. up here in Canada the truck can be split in half by rust and these exhaust when stock are always looking brand new. 😂

I have a 95 k1500 with the 350tbi and it has a y pipe with no cat and I just cut the muffler off last night it’s running from where the muffler was like how yours is and it doesn’t sound bad, it’s definitely a lot louder then yours because there’s no cats but it honestly sounds good and it’s not too bad for drone on the highway I’m eventually gonna put a flowmaster super 10 on but I’m gonna wait for a bit cuz I’m having fun😂

My 1995 5.7 v8 Straight pipes all the way with Y-pipe two straight out the back

I feel the pain lol did that same mod to my old Tahoe and nearly cut my finger off with the sawzall

Used the old pipes from the old exhaust system and used em" to delete the resonator and used to make 2 dump exhaust pipes...

Sounds good 👍

That’s a clean OBS. Better hold on to that one! hard to come by that nice 👍🏻👍🏻

@richodd2292

Жыл бұрын

mine is way cleaner

That old Cummins stole the show

I think what you should do is cut off the cats and do a dual in and dual out Flowmaster Super 10, you would absolutely love it!

I want to buy it when ever your ready to sell it. I’ll definitely buy it

My truck came with a previous owner installed heartthrob cat back exhaust system glasspack kit with chrome or stainless 3 1/2 outlet slant cut 18 inch long exhaust tips except for the cat delete because the wrong cat back kit was ordered so it was straight welded on..sounds great.. my exhaust tips are straight out the back of the truck,I've thought about redoing it by heating up the exhaust tailpipes and bending them into 90's out behind each rear time but it sounds great so I left it alone..

It is already daul exhaust to the muffler so it be easy to run pipes all the way back and have true duals.

Sounds good 👌🏽

5:28 YOO, where those jackstands at?? Come on man.

I have same year truck same engine an my dump n the middle with flow master muffler at the end

She ain't got a name also that truck is beautiful

Delete the cats and put flow master 40 series two in two out with a 90degree dump it sounds great it did on my 98 anyway

Cats who needs cats.frist thing I did when I bought my truck good bye cats lol

At 9:50 u said that u don’t see them that much I have a first gen 2 door regular gas long bed Dodge Ram w150 with dual straight pipes angled out the back I love it me and my grandpa built it together

I had a 96k1500 for my first truck and It had short glass packs on it but I cut them off intending to eventually put different mufflers on it but never got around to it so for the longest time it was just like this and for what it was it wasn't actually that bad 💀

I would say put some kinda streight through muffler on there. I used to do this on a lot of my trucks/cars back in the day. Either no money or just wanted it to sound loud now! Lol. All the shitty crackling, raspy noise got pretty annoying. But once you buy a quality muffler or system, you never go back. Thats when you realize how bad it really sounded lol. Don't get me wrong, I still like a loud exhaust, just like a refined tone. I'm ordering a Carven R series for my 19 z71. Then make a y pipe to split into the duel existing MBRP system I have now. They sound great. Deep, crisp and loud!. Oh also, get a diablosport i3 with a (diablew) custom tune. Its mint. I do have short video of it if you like see it. I do a 0-100km/h one up on the torque converter 0.- 100km/h and a 60 to 100. If you check it out, don't mind the poor camera and talking skills lol.👍🇨🇦🍺

@campbell0162

3 жыл бұрын

Beautiful truck and nice sounding exhaust setup you got on your rig. I checked out your videos on your truck and I subbed. How many L/100km do you get while running that tune? Is there any difference from the stock tune?

@02mp9696

3 жыл бұрын

@@campbell0162 thank you. From stock, to where it is now with tires level, tune, etc. It is not to far off from where it was factory. I also keept a bit of rake for aero like factory. I was around 16L per 100km, if i remember, and now its maybe 1km a L more? I drive with a heavy foot most the time. I plan to weld in a Carven R series muffler soon with y pipe. And gut the 3rd cat. My tuner will revise the tune if needed, and will see how it does. Going to be pretty loud. Ill be installing some diff drop spacers in a few days. Maybe ill make a video. 👍🇨🇦🍺

If you want to make baby squat have faster throttle response look into getting a pedal commander

Sounds great

Level, wheels/tires, roll pan (due to dent in bumper) 👌🏻

@Hoffmanpro55

3 жыл бұрын

Running board delete also

Are you planning on lifting Earl? And or putting wheels and tires?

You should put a leveling kit on it

Sounds good man , but would you still passed inspection ? Like no codes ?

To clean it up you should put some turn downs on it

Can you do a current review on your AFM disabler??

Dayuum bruh! nice truck…

Can you please also do a video where Lauren drives it for the first time?

Turndowns help reduce the little drone there is

Ur truck soooo clean

I will say buddy that is going to sound better after you put straight pipes on it 😉

I like your trucks bro

Wrap “earl” in 5%

Instead of tucking them you could do this setup out the back

What was going on at 9:12 in the background lmao 😂

@AaronCates

3 жыл бұрын

Glad someone else saw it. Looks like they were sword fighting 😂

@JJ.Angelo

3 жыл бұрын

fencing 🤺

Truck sounds good now

Mine sounds exactly the same but I have true duals with no cats with glass packs and 4 inch tips

Clean truck

FINALLY U MAKE A NEW VID WITH THE TRUCK... HOW MUCH DID U PAY FOR THAT TRUCK? I GOT A 94 CHEVY S10 V6 VORTEC 4.3 WITH 240 K REBUILT TRANNI FOR $500

If you downshift manually it will pop and crackle. I have the same kinda truck with the exact same thing done

I'm gonna be doing a muffler delete on my 97 c1500 if it has 2 true dual exhaust gonna run ether 2 glass packs or magaflow exaust with 4 inch tips going in front of my back passenger side tire loud and proud