How does the existing wiring work with the new projector?

Been trying to buy the stuff off your website to do this but i cant find any of the stuff needed 😞

is it possible to convert the main beam into HID/projector lights aswell?? if so what size projector lens would be needed? 2.5" all round or would it require 3.0" lens

Do you have to install auto leveling or you can just position them manually and leave them like that?

i wish there was a person in my country who would understand and do what you did

@RetrofitSource

Жыл бұрын

What country are you located in?

@murithimorris91

Жыл бұрын

kenya..mechanics and generally everyone touching your car doesn't mean well..they may actually make it worse to earn more from you

@brianblasius

Ай бұрын

@@murithimorris91 wacha hizo. Tafuta mtu wa E46 ambaye anajua DIY. Nimeinstall hizi vitu vyote on my own, huhitaji mechanic. Oh, you wish there was someone with those skill? Go learn how to do it.

man this looked sooo fuckin easy. i dunno why it was a lot harder for me to do an FX-R retrofit into my ZKW OEM HID housing.

@jonzxcv

7 жыл бұрын

Those projectors are huge...I have them and my biggest problem is getting the beam pattern to be perfectly horizontal. I had to cut away half of the low beam reflector bowl and epoxy the projector in

excellent video. Friend an appointment. How can I clean the reflector? And not damage it? regards! Thank You

Great video! The angel lights is held on with 2 clips on each side. Does that come off easily or when you're on a bumpy road for example?

@RetrofitSource

2 жыл бұрын

Absolutely not!

Omg it just pops off???? Why the hell don't all manufacturers do that??? Would make life much easier and make them more money for new seals and new lenses

Does this kit work for e90/e92 conversion as well? Where can I find the projectors?

@Ty-nb5mi

7 жыл бұрын

Keniel Martinez look up the e90

Do you need a specific dermel or does it matter as long as you can trim the plastic down.

@RetrofitSource

4 жыл бұрын

Any Dremel tool will work well.

May I ask where did you get that yellow high beam reflector piece? Did you paint or wrap it or something?

@RetrofitSource

2 жыл бұрын

Paint!

Where can I get those new lenses? The front transparent cover of headlight housing?

@RetrofitSource

Жыл бұрын

The best option is to buy a new OEM unit and use those lenses. There are not a lot of companies that make full-headlight lens replacements.

Please, do a video like this on a bmw e60 with halogen headlight

@RetrofitSource

4 жыл бұрын

We might be able to make that happen!

@leofofodk

4 жыл бұрын

@@RetrofitSource Would greatly appreciate

Where the bi xenon solenoid wires connects to ?

@RetrofitSource

5 жыл бұрын

They will connect to your high beam

@Peralta1224

4 жыл бұрын

If my car has DRL option on the bulb of the highbeam with a 5v signal, where should I wire this solenoide signal? Still in the highbeam signal?

Is there ANY way to fit projectors and keep the oem bulbs?!?! Seems like no one can pull it off on KZread

@RetrofitSource

3 ай бұрын

Yes and no. In theory, you can find another projector that uses an H11 bulb type and use that... but performance is going to be lackluster. Performance projectors are made for D1S/D2S/D3S/D4S and H1 primarily.

I was going to buy another set of headlight and try and run a dual xenon headlight with halos would that work??

@RetrofitSource

2 жыл бұрын

Absolutely! This would require some custom wiring but it can be done!

What exactly am I supposed to grind down on my bosch headlights?

@RetrofitSource

3 жыл бұрын

Shoot us an email at support@theretrofitsource.com if you still need help

What if I am able to find Led bulbs that fit in the hole, would they work?

@RetrofitSource

Жыл бұрын

No. The beam pattern would still be terrible and not bright.

Does this come with bulbs? And how does it wire to the car?

@RetrofitSource

2 жыл бұрын

Our projector kits do not come with bulbs, they use a relay harness with an HID kit to power the bulbs!

When I click on your link it sends me to a page that says "Sorry, we could not load the content you requested." Please help i really what exactly what you did here.....thank you

@RetrofitSource

2 жыл бұрын

Reach out to our CS team, they can help you piece this together! www.theretrofitsource.com/morimoto-xb-led-dodge-ram-1500-2019

Bulbs, electronics etc. used in any U.S. vehicle need be DOT approved. Case in point: BMW electrical fire in a garage; ( I believe these were LED tail light mods)... upstairs house burned too... Auto Insurance found the Non-DOT approved mod and disallowed claimant recovery.

@Ty-nb5mi

7 жыл бұрын

Tatter Salad these are dangerous?

@SomeNormalRomanian

6 жыл бұрын

they are not dangerous if wired by someone who knows what he's doing :)

is the size on these projectors 2.5 ?

@RetrofitSource

Жыл бұрын

Yes, the Mini H1 is a 2.5" projector.

Brother do you need any coding? For it not to trow a code?

@RetrofitSource

11 ай бұрын

You will not need any additional coding for these lights to work.

is it possible to connect two projectors to each side?

@RetrofitSource

4 жыл бұрын

Definitely, you will just have to run 2 low beam harnesses. www.theretrofitsource.com/hd-relay-9006.html To connect them to your vehicle just run this splitter on the inputs to the harnesses. www.theretrofitsource.com/high-beam-splitters.html

For the price of this kit, i rather buy factory projectors

@RetrofitSource

6 ай бұрын

If you're looking for a budget build, it's not uncommon to go to the junkyard, pull some high-quality OEM HID projectors, and retrofit those!

@playuhhaytuh5633

6 ай бұрын

@@RetrofitSource​​⁠ it just doesn’t make sense to have an overpriced kit do the same thing as a $100 kit, but hey! some people also like to buy $500 cheeseburgers that taste the same as a $10 one 🤷🏽‍♂️

illegal

@RetrofitSource

3 жыл бұрын

That all depends on the location you live in. What might be illegal in your area docent always apply to others.