Saw these on your site and ordered from Triumph. Followed your instructions step by step. Went perfectly. This was my second mod to my ST. Look awesome. Thanks for the video.

@mancavemoto

6 жыл бұрын

Nice one Damon, there’re a great bit of kit aren’t they

I love that you try out all these diffrent accessories for the Street Twin. That makes my desission for my ST so much easier when you give reviews. Thumbs up.

@bill_4359

7 жыл бұрын

You have part numbers listed. Did not see them at first look. Thanks again.

@mancavemoto

7 жыл бұрын

Thanks trond

I just purchased these yesterday at the dealership. They look great and feel good in my hands!

@ashwinoashwin

4 жыл бұрын

Hi. I am planning to buy these. How would you rate them as against stock?

Just used your video as a guide to switch my levers out, super simple to do. Thank you!

@mancavemoto

4 жыл бұрын

no problem, glad it helped

Holy Cow! Finally a KZreadr that knows how to edit a video. Brilliant video! Thank You

@mancavemoto

5 жыл бұрын

Why thank you sir

Hi Tony. Once again I find myself in one of your high quality videos in order to complete the next mod on my 2016 street twin. Bar end mirrors, headlight grill, gear peg, tank pads, Pirelli Scorpions - all done. Now it’s time for the break levers. Next on the list is the speedo black out. Although I’m always watching the recent uploads, your old street twin’s videos still feels very pleasant to watch. Ride safe.

@mancavemoto

3 жыл бұрын

Thanks Augusto, its good to hear that the videos are still being useful

Another excellent walkthrough from the Man Cave! Thank you for this helpful content

@mancavemoto

3 жыл бұрын

Cheers

Having just dropped my new Street Twin at 0.3mph on it's first ride and snapping the clutch lever, this is super helpful thanks Tony! Don't ride whilst recovering from COVID is the lesson!

@mancavemoto

2 жыл бұрын

Glad to be of help, hope the bikes not too bad

My man, thanks for all the street twin content

@mancavemoto

10 ай бұрын

No problem

Used this to fit levers to my 2022 Speedmaster. All good. Thanks!

@mancavemoto

2 жыл бұрын

No problem, glad it helped

Just fitted my levers with your help man! Thanks so much for the awesome video once again.

@mancavemoto

6 жыл бұрын

No probs Aaron, glad it helped

@ashwinoashwin

4 жыл бұрын

Hi Aaron? How do you like these levers? I am planning to buy them and can't seem to find reliable reviews for the same

Good video as per usual from Tony. I have just done an install of the equivalent Triumph machined lever kit on a Thruxton R and I offer this word of warning to anyone using Tony’s install on his bike as a guide to how easy it might be on the Thruxton R . I naively figured it would pretty much the same. It’s very different. The clutch lever is fitted very much as per Tony’s install and is a piece of cake. The brake lever is a real bugger to fit. The kit doesn’t include all the parts needed. You have to salvage several of them from the original lever which I can only presume this is to keep the cost of the kit down. That’s not so bad, but you then have a devil of a job getting the pivot bolt relocated because you’re working against the reloaded spring tension. Might be easier if you had the special factory tool referred to in the instructions but I didn’t have it. Almost needs another pair of hands.

@mancavemoto

Жыл бұрын

Cheers Paul, its a shame its more of a pig of a job on the thruxton!

Nice, just bought the short version for my 675. Happy days.

@mancavemoto

7 жыл бұрын

Ryan Harkin Yep, they are lovely things

Very handsome addition there, classy

@mancavemoto

3 жыл бұрын

They look great don’t they?

Good review/tutorial. Thanks for sharing.

@mancavemoto

5 жыл бұрын

no worries

Excellent instructional video, well done.

@mancavemoto

Жыл бұрын

Thanks

Great job as always!

@mancavemoto

7 жыл бұрын

+Detroit Dizzle Thanks Dude

Thanks! I'm with you on using OEM accessories because of fit and compatibility. Guys are fitting aftermarket TEC levers and are having problems with breaking the brake and clutch lever micro switches. No such problems with the OEM "long" levers for my T120.

@mancavemoto

6 жыл бұрын

Exactly! tsmgguy

Thank you so much. Great vid, really helpful. You star.

@mancavemoto

3 жыл бұрын

No problem, glad it helped

I'm extremely happy with the same levers on my Street Cup. Are you happy with them now that they've been on a bit?

Nice, where can i buy those for my ST 675R 2016, i saw a short version, but someone told me that the short version doesn´t fix in my street triple, is that true?, i´m form Perú.

Hi Tony : I think it is 2 to 3 mm of free play for the clutch - p 88 of owner's hand book. Fine job as always.

@mancavemoto

7 жыл бұрын

Thanks Peter, I'll have a look, I took the freeplay from the fitting instructions for the levers.

Nice one Tony. Triumph want £185 for a pair of these now. I’ll go with Tecs £50 efforts. I bought them before. Perfectly adequate if not quite the quality finish.

@mancavemoto

10 ай бұрын

Ouch!

Awesome Vid. How about a video on how to change the grips. Thanks!!

@mancavemoto

6 жыл бұрын

Thanks, maybe if I need to change the grips sometime

You saved me! Thanks!!

@mancavemoto

5 жыл бұрын

no problem

Nice video. Does the new set solve the up and down clutch lever waggle?? I hate that! I’ve had it on all of my bikes. Speed triple S. considering these as a more fine fitted option. Thanks.

@mancavemoto

3 жыл бұрын

Yes it does!

Levers look nice. Why did they not include a new bushing for the clutch. Or better yet already have a new one installed on the new lever? Looks about the same as the Strada brand which i sent back due to lousy fit. A.S.V. ordered. Rocket X

@mancavemoto

6 жыл бұрын

Good question james, but one for Triumph. These fit perfectly and have worked faultlessly since being installed.

Changed mine yesterday (t120) but had some real trouble to find the exact spot to get the bolt back into the break lever. First I thought the new lever was not ok, but I could not put the old lever back in, either. After lots of trying it worked with the new one. Is there any „trick“ I missed? Clutch was no prob, went in easily.

@mancavemoto

5 жыл бұрын

No trick, mine just went straight in. Strange

Sweet looking; better by a country mile! 👍

@mancavemoto

2 жыл бұрын

It sure is!

Please help!! I was able to change the brake easily. But I can’t get the clutch screw to rotate and line up with groove. Do you have any advice? Thank you!

@mancavemoto

5 жыл бұрын

Which screw are you referring too?

How did you get that pivot sleeve out at 4:26? Did yours just slide out easily? Mine seems welded onto the lever itself... might need to buy one it seems.

@mancavemoto

3 жыл бұрын

Yep, it just pushed out easily. But my levers were still relatively new.

Hey Tony, I’m a few years late to the party.. but I just installed these levers onto my 2022 street twin. Everything went perfectly thanks to you. Only thing is the brake lever feels to far. I have relatively large hands XL glove size. And I’ve played with the dial adjustments. Even the lowest setting feels far compared to my stock levers. Any advice?

@stevenelliott5403

2 ай бұрын

Bit late in the day but I'm with you on this, if you have smaller hands I don't think these would be suitable which is crazy, that's the whole idea of these levers

Will these fit the trident 660?

Nice video

@mancavemoto

7 жыл бұрын

Cheers

Awesome, sadly i can't use them legaly in germany since they are not TÜV approved from what i could find.

Would these fit on the air cooled efi scramblers? I have a 2014.

@mancavemoto

4 жыл бұрын

I'm not sure they would, I'd need to check.

Fit on Bonneville Bobber?

Look pretty trick! 👍🏻

@mancavemoto

7 жыл бұрын

Cotti 🤘

On my speed triple, the stock levers have a master cylinder plunger that has to be removed and added to the new lever before fitting. If anyone knows how to get the damn thing out of the lever please tell me. I have 2016 model with Brembos.

@gabelazar6376

Жыл бұрын

Hey! Did you ever find the Abeer to this question as I just realized I have the same issue? Any advice or possibly links to videos or guides would be greatly appreciated! Thank you!

@Knightlore10

Жыл бұрын

@@gabelazar6376 I forgot I sent this question. Check out my video on this subject if it’s the same issue I had. You have to push the bearing out to release the plunger….

Hey. Great video! The little pinion sleve wont come out of the old clutch lever. I have tried to spray som oil on it, and even tried to knock it out but it's stuck. Any ideas?

@mancavemoto

2 жыл бұрын

Have you tried some heat on it?

@jonasvaccaro7606

2 жыл бұрын

@@mancavemoto No, but wouldn't that only expand the metal further? I can certainly try.

@mancavemoto

2 жыл бұрын

They are two different metals so will expand at different rates. It might be enough just to free it?

Sunday, June 11th I stupidly dropped my 2017 Triumph Street Cup! I bent the clutch lever. Now I know how to replace. Thanks . Never dropped any bike for 30 years. Getting old! Could you add the part numbers, Thanks for the how to video. Keep them coming. From California, USA.

@bill_4359

7 жыл бұрын

I see that you listed the part numbers. Thanks

@mancavemoto

7 жыл бұрын

Bill Barnes Cheers Bill

May i ask, does this fit all the models? I have a Street Triple R (2010)

@mancavemoto

4 жыл бұрын

This part is listed for Street Twin, Street Cup, street scrambler, T100, T120 and thruxton 1200. The street triple version you’d need depends on your Vin number, there are various part numbers

@LordAnestis

4 жыл бұрын

@@mancavemoto Ok thanks for the fast reply!

I got the levers as well, but I'm having issues with putting in the pivot sleeve into the new clutch. It doesn't fit. Did you have any issues with that?

@mancavemoto

7 жыл бұрын

Hi Classic Dice, no I didn't have any issues with that, it was a slightly tighter fit, but not much.

@classicdice21

6 жыл бұрын

I must have a defective one then, the hole is definitely too small for the sleeve to fit in.

@mancavemoto

6 жыл бұрын

Thanks really strange, worth popping into a triumph dealer to let them take a look. I can't imagine they would differ from bike to bike, so its not that they are the wrong levers (im thinking maybe packed in the wrong box?)

Do these work on Bonneville T100 AC models?

@mancavemoto

8 ай бұрын

I don't think they do, from what i understand its a different lever

just did mine while watchn! thank you:D

@mancavemoto

4 жыл бұрын

Glad it helped!

Tony, thank you for another great video. I am new to KZread and was wondering if there is a way to send an e-mail to you or is it best to communicate here. Would like your advice on a couple of items I am looking at (center stand or scissor jack, shocks upgrade, etc). Mahalo!

@mancavemoto

6 жыл бұрын

Hi Jim, you can send messages via KZread. Click on my channel name, then select the About tab and there should be an option to send a message. Alternatively you can message me via the Facebook page, Instagram account, Twitter feed or Website.

Hi. I am planning to buy these for my t100. How are they after 3 years of usage? Are they more comfortable and ergonomic than stock.

@mancavemoto

4 жыл бұрын

They offered more adjustment which is what I wanted and are nice to use

@ashwinoashwin

4 жыл бұрын

@@mancavemoto are they ergonomically more comfortable to use than stock levers?

@ashwinoashwin

4 жыл бұрын

@@mancavemoto and yes, thanks for the response

@mancavemoto

4 жыл бұрын

They feel smoother and I think the grip is better

Can 2021 street twin use it? :)

@mancavemoto

3 жыл бұрын

I don’t know if they changed the levers when they went to Brembo brakes? If not then yes they will

I have these fitted to my T120 and even on the lowest setting they're only just about where I want them to be and I have big hands, I don't know how anyone would get on with shorter fingers, just seems a bit odd, but they're most definitly better than what comes on the bike, at £195 I guess they should be 🤪

@mancavemoto

2 ай бұрын

Strange, I have relatively short fingers, but i found them to be OK

I personally prefer chrome. I hope Triumph will offer a chrome oem replacement.

No man should never say that have small hands...

@mancavemoto

7 жыл бұрын

Mark Masztal haha, I should have said short fingers, but they are thick ;)

😳😨 £155 a pair?

@mancavemoto

7 жыл бұрын

Yep afraid so

The Triumph levers look great and Im sure are high quality but good gried $200 fkn dollars? Nah.

I got these brand new for £40 from Triumph.Bargain.

@mancavemoto

Жыл бұрын

Nice!

Not worth it

@mancavemoto

2 жыл бұрын

Thats subjective obviously, but thanks for watching

@c.g.c2067

2 жыл бұрын

@@mancavemoto Just replaced both of my levers with original stock ones payed a silly amount of money... I have the feeling Triumph is pulling the rope too much with parts