always great reviews and honest opinions! thanks for posting

I love the look and style of the truck but after watching a few videos it seems like a turd. Not really sure what it's designed for not enough suspension travel for a basher and no adjustments for a racer. Too expensive for an in the middle truck for me. Great content brother I love the channel thanks for all your hard work! Please keep it up

@coolhawk2003

Жыл бұрын

There is no racing for that size. Drives straight and turns tight . Why the need for adjustment ? Suspension no big enough? Bigger shocks then most tho. Maybe just add a heavy spring like you would with any rc to turn it more bash friendly.

@mikew2930

Жыл бұрын

@@coolhawk2003 I said not enough travel on the suspension. The videos I watch every jump you can hear it smashing on the chassis. I don't believe it's going to hold up or be a good choice for bashing. As for racing part, you want to be able to tune your set up for different scenarios. But my hole point is this truck has an identity issue what is it for? And at a G to play with one I'm out. But I love the style and look of it. If you like it get one! I hope you enjoy thats what this hobbie is about!

@coolhawk2003

Жыл бұрын

@@mikew2930 heavier springs ? What races? Anything this big is for fun. Its not a track car. Your not going to do indoor races or drifting with something this big. So why would they make it full racer? Odd there's x-Maxx if you want big shocks if not here's one with better turning, little less torque and more speed.

@mikew2930

Жыл бұрын

@@coolhawk2003 that's my point its not a race vehicle nor does it seem to be set up for bashing. What are you not understanding? It's seems to be a turd in the middle not good at anything but being expensive. And people seem to agree those are just my thoughts.

@coolhawk2003

Жыл бұрын

@@mikew2930 kk good chatting with ya.

Always a pleasure to watch an rc driven as it was intended for. I think the wing would have helped with the nose heavy end of it but otherwise, she's a beauty.

@DB-qm4jx

Жыл бұрын

I mostly agree. Though I do think it’s (probably) fun for some bmx and flat land jumps like razor is doing. It seems like it needs quite a bit more power but …. Still seems fun to rip, maybe not $1000 worth though. I may may not get one. I’m still undecided

Just the video I was waiting for! The XRT looked right at home👍

@RazorRC

Жыл бұрын

glad you liked it, I was expecting half the comments to be like "that's not a race truck, stop driving it on a track!"

@DB-qm4jx

Жыл бұрын

@@RazorRC that’s not a race truck! You should have stopped driving it on the track. Well Razor. Thanks for all the great content! 😅

Great rip Razor! That is exactly the type of terrain I would think the XRT were designed for. It did well overall, think it needs more power to be able to make air corrections though. Love to see a head to head with a K8s on that track!! I didn't know the chassis protruded in the center like that, weird design indeed. Imagine a dozen of those things out there tearing it up!! Keep up the great work!!👍🍻

Awesome vid man. Appreciate you. Wing mount solution is in the mail for ya

Dude you have some great places to run. Nice run.

@RazorRC

Жыл бұрын

Thanks 👍 Yeah, lucky with where I can drive this thing, got a couple more places I want to try the truck.

That was a pretty awesome video. I am building a on my property for large scale trucks.👍🏽👍🏽

This thing is a race truck - FLOW! It's a capable basher but meant for the person who puts the emphasis on performance and handling! Great run! 👍

@RazorRC

Жыл бұрын

thanks, it works pretty well at a track with jumps

Nice run on a perfect track. Do the hard case batteries fit easily into the compartment or does it get tight when closing?

@RazorRC

Жыл бұрын

standard hardcase 4S race packs fit fine, with about 5mm of extra gap

Bit of an aside question, but any estimates on how high the ramps are at the parks you run at? Especially the main BMX track you record at. On the east coast we are severely limited in available tracks so we have to build our own ramps. Just curious on dimensions of a good ramp. Thanks!

Great track Awseome 🎉

Heya, if you had to choose, would you got for the Traxxas XRT or the Arrma Kraton 1/5 EXB?

Love ur videos man ! Do u like it better than driving the xmaxx? How different is it?

@RazorRC

Жыл бұрын

it drives different, at the end of the day the XMaxx is a super tough basher, and the XRT is a race truck version of it. seems obvious, but nobody seems to be able to realize that.

Should try to put thicker oil in shocks and tighten the springs

Hi, nice video! is it possible to share where the track is? Thanks!

Sounded like you were lettin off the throttle just before the top of the jumps when you went nose down.. mine tends to jump nose up

Hi razor rc would you like to make a comparison of 1/5 scale trucks as well as you have done it before on 1/8 scale? Maybe the air controll could be improved with the 1/5 Outcast wheels? Thanks for showing us all sides of the XRT... . Whats the weight compared to the Kraton 1/5 scale? Cheers Benni

That's A nice spot

That looks like fun my buddy just bought one of them RC's. That truck seems to have a lot of kick up from the rear end over jumps how would I stop that from happening

@RazorRC

Жыл бұрын

it's actually too soft in the rear

Decrease tension in the rear springs might help with the nose dive. Looks like to me the rear tires are pushing the rear end up.

@radiovlogi

Жыл бұрын

Looks a bit bouncy in the rear to me too. Nothing you can't tune with some shock oil or tension trickery I suppose. This looks so good. Never wanted an X-maxx, but this one makes me feel the wants.

Looks like it needs taller gear to be able to pull that front up when in the air.

This is the first running video I've seen of this truck that isn't paid for by Traxxas. To be honest, speed seems to be decent, but more is always better. Haha. Missing wing is standard for most RCs with a wing... I've seen so many people break off the wings in cars, it seems very few companies make a decent wing mount that can take a few hits. Traction looked ok, especially on a damp track, so that's a positive for the tyres. Suspension however; "Houston, we have a problem". Massive kick up off the jumps and a crazy amount of rebound when you land. Did Traxxas even test this thing? 🤦🏼‍♂️ Unless you've been messing around with the suspension, this truck needs a complete suspension tune. And did I see that right, the chassis is lower than the rear diff? 😳 I need to go look at some pics of this thing... I have one on order and I'm already starting to have second thoughts. 🤦🏼‍♂️😟

@bryan17838

Жыл бұрын

The wing adds Stability in the air. mine jumps sweet. not nose heavy at all ... tires are a factory as well in gearing / tuning the way you drive ✌

Are rear springs more powerful than front? If so I wonder if rear suspension kick the tail up and sends truck nose diving on jumps. Something to experiment with I guess.

@RazorRC

Жыл бұрын

needs stiffer rear springs actually

Hey man I went to calb my esc when I first got it and it blinks red then green and yellow color and it goes in limp mode I have to unplug battery and then it will go fine

X-spec races 😱💪💪⚠️

@RazorRC

Жыл бұрын

would be cool!

were you in Livermore?

It didn't seem too happy jumping without the wing. It could use a do-over at that location when that gets fixed.

@RazorRC

Жыл бұрын

yeah, it would be better with the wing

Despite the crack, I really like how that center skid is designed. I figure it won't be long before someone makes an aluminum replacement - it will dramatically increase the strength and durability of the chassis (good for bashing) but it will keep the weight low for even better handling!

@RazorRC

Жыл бұрын

aluminum skid plate would be nice

@valuerc2664

Жыл бұрын

What I like about plastic skid plate is that when it's scratched I'd doesn't look terrible like scratched aluminum chassis, and if the scratched look bothers you you can replace it for much cheaper than buying new aluminum chassis

@jerryvolpini7987

Жыл бұрын

@@valuerc2664 Natural or clear aluminum, no worse than the stock plastic, at least in my mind, but I get your point.

@valuerc2664

Жыл бұрын

@@jerryvolpini7987 yes you are right, but I don't remember that I have seen too many cars with non anodized chassis. The only what comes to my mind is optional 7075 chassis for Traxxas jato, and Traxxas nitro models that were made before 1998

@jerryvolpini7987

Жыл бұрын

@@valuerc2664 Plenty of non ano'd chassis', M2C being a prominent one.

If you can tune that suspension to work well it'll be impressive. You've got your work cut out for you though

Super sledge.....ehhh, drop price to Abt $599 then it'll be something to have...but $999?

No it’s not a race truck. Just a basher that handles and jumps well.

I heard this thing pushes like crazy. No rear wing is the way to go with his truck if you want it to turn in near stock form.

@ragsixracing

Жыл бұрын

My new xmaxx pushed out of the box. With a little research, I found that trx put heavier diff oil in the rear diff from the factory. This went against my setup for every 4wd buggy and truggy I've ever raced or bashed. I just swapped the front and rear diffs, the problem was fixed, and then I could throttle steer leaving turns instead of babying it out of the turns. If they tuned the xrt diffs the same way they did the xmaxx diffs, swapping the f and r diffs will take away push, and give more on power steering👍

@RazorRC

Жыл бұрын

I noticed the rear diff feels more stiff than the front. Good tip! It definitely is missing on-power steering.

They should have made this a 1/8 scale instead of the sledge . Ijs

I feel as tho Traxxas should have made a 5th scale erevo

@RazorRC

Жыл бұрын

now THAT would've been something!

think the wing might have helped with the diving?

@RazorRC

Жыл бұрын

yeah it would have

no wing is no jumping :)

Kind of a race basher truggy but not as a pure breed racer like those ET Tekno, TLR eight-T etc etc

here in the UK they are selling the Traxxas XRT for well over £1000 for a brittle plastic everything oversized tamiya, thats £300 more expensive than Arrma that comes with aluminum chassis and alu/carbon parts and the countless armma carbon/alu upgrades already easily available, sorry but, at least here in the UK, traxxas is a very expensive mistake.

@RazorRC

Жыл бұрын

I can't believe how much they charge outside the U.S. It's already overpriced in the U.S. compared to the other brands.

It's cool ~~ It's a car that doesn't exist in Korea yet

where is that

Wonder if it would jump flatter if it had the wing?

@RazorRC

Жыл бұрын

I think so

This is cool amd all but there will never be a class for it or a track built big enough. With that said it would be cool if there was. Definitely need to drop the 1k price tag downe especially when you can get a kraton for 699 and add actual good electronics like castle or tekin and git rid of the shitty vxl/tq rtr electronics

@RazorRC

Жыл бұрын

yeah 1/5 or 1/6 scale racing is pretty impractical so not likely to catch on

@jeffbryner5355

Жыл бұрын

@@RazorRC sure would be awesome though huh. Huge cars all flying through the air haha

i remember when the emaxx and tmaxx opened up new 'monster truck" race class, then the slash made short course class pop up as well...

@RazorRC

Жыл бұрын

totally agree, people don't understand that about Traxxas -- they try hard at inventing new categories of RC

@valuerc2664

Жыл бұрын

One reason why I don't think xrt race class will become very popular is price, and place to run. It's also interesting how funny car was never super popular but after some time nprc become super popular

It’s a heavy truck, so you gotta stay on the throttle or nose dip.

It is a lovely car we did great parts put together and yet it’s reminds me why I hate Arrma 🚗🚗 Xbox design way better way higher in design for rough terrain it is just a middle truck with a lot of power not good for me I’ll stick to Xmax until they can come out with something better😉

seems like a rustler the size of a xmaxx

@RazorRC

Жыл бұрын

it really is

Traxxis calls it the self righting system.

just an over priced big rustler…. traxxas will suck in many people to buy this.

I think your video is the third or fourth I’ve seen where the center of the chassis broke. It’s a heavy, low profile truck that has a lot of chassis slap. Loos like Traxxas needs to upgrade that center chassis support. Looks good though. To big for my taste. 6S is the highest I go.

@RazorRC

Жыл бұрын

hopefully RPM or M2C or somebody makes a more durable center skidplate, the stock one is kinda weak IMO.

The few main players of a 5th truggy is this and arrma. But one thing the xrt is not is a race truggy. Race cars must be able to be tuned well, for a variety of tracks with super low cg. The xrt, like other Traxxas 4x4s puts the driveshaft under the motor with lots of plastic. Good for bashing, not for racers. Still the flat 3 diff setup with tons of suspension adjustment reigns supreme on tracks. Traxxas just does other things better than track car companies. E.g. Marketing!, Huge distribution network for parts, great Rc cars that open the hobby to the masses for a fair price, repairs have gotten far easier, hop ups and upgrades, and Traxxas cars (except for the revo) tend to be very durable. If the xrt allows for a 1/5 truggy race class then great! If it takes off, even better for Rc. If that happens it’ll be like other times Traxxas helped blossom a new race class. Everyone will drive traxxas until losi, associated, Tekno, mugen, etc comes along and builds a better TRACK car. With that said I think the xrt is awesome! It’s a low cg xmaxx. If one likes a low slung, nimble bashers then get it and have fun. If you like monster trucks, rock crawlers, it’s all good, there’s room for everyone. Btw, nothing says you can’t race a Traxxas. Traxxas has done a lot for the Rc hobby, I’ve seen countless people really get into track racing simply bc one day they decided to show up at a local track with a slash. I like traxxas cars quite alot, you just won’t see me have one at a track unless it’s in the parking lot screwing around. For the record I currently have an xmaxx with a hobby wing max 5 combo, kraton 6s exb with a castle system, tekno eb48, eb410, et410, sct410, mt410, associated b6, sc6, mugen mbx8 worlds nitro buggy, losi scte, losi 5ive T. I’ve had many many more rc’s both of bashers and track cars over the last 30 years from HPI, habao, Tamiya and everything in between. I’m not a fanboi of any brand, except maybe tekno, awesome electric cars. The xrt might have its track day glories and victories and that’ll last until a real race car company builds a better one.

Look like xmax slow, and not that durable i watched both videos and broken both times with very light jumping???

Yep not really a heavy basher or stunt truck

hmm. That car frontdives to much

Not at all.

No! Race vehicles are designed to be tuned for different race conditions. Speaking bluntly, the whole purpose of this RC is to take away sales from Arrma. That's it. Traxxas is a basher company. The only time you ever competitively race a Traxxas is in a "spec" series where all other cars are outlawed.

@retroaura5581

Жыл бұрын

Arrma fanboy?

@kelleycook4753

Жыл бұрын

you're wrong it's a 1/5 scale race truck, arrma is a basher company as well and no such thing as 1/5 scale race truggy except with the two brands... so you have no point here that was made.

@ragsixracing

Жыл бұрын

I think it's pretty clear that Traxxas has always sought out new customers AND started entirely new categories in rc to draw new hobbyists into rc. What you posted is exactly opposite of Traxxas's entire business model. Stop being so jealous and go fix your bent truck...

@RazorRC

Жыл бұрын

you nailed it -- traxxas is big on inventing new types of RC, which is a good thing.

@SengLeeKoh

Жыл бұрын

i would agree with you DaVile, perhaps except on that part to take sales away from arrma; that role belonged to the Sledge.