1:16 Mate, scratches on aluminum parts look damn good !! It looks even more real

I took all of the inner grease seals out, from the front/rear axles, and the transmission. I added 3mm set screws for adding WD-40. So far so good. I never worry about bearing grease now days. I am also running the Hobbywing quickrun fusion 2-in-1 2300kv system geared 22-39. And this little system turns the 5.80"×4.00" Tires most impressively.

Man I’ve been eyeing those axles for a month now. I’ve never messed with the internals of the axles yet either and looks pretty involved but as long as you stay organized and know what goes where, definitely doable. Great info!!! Thank you

@ezboyrc553

Жыл бұрын

Is there actually very easy to put together. I've had no issues out of them so far.

Thx for the great vid. Love the upgrades. Can’t wait to see it run

Looks nice brother! Cant wait for the running video, I wish I could have been there!

Bro that little set up is sick!

great job thoroughly enjoyed

Great upgrades. I was first a little bot unsure about the shiny axles. But they look good on the truck, too.

Man those look so good!!

Far out!! Look at all the work and details in this diorama. Its amazing 👌👍 love your work.

@ezboyrc553

3 ай бұрын

Thank you very much!

Startin to look beastly bro! Cheers yall

Nice work, looks good!

It's a beast!! Looking good!!

Looking really good! I think, now it is time for some golden stripes or pattern on the body too.😎

AWESOMENESS with those Axles!!!

Beautiful rig. Love the upgrades.

@ezboyrc553

8 ай бұрын

Thank you.

Looks realy nice man😋👌

You should do a complete update on the high trail. Like all your updates

@ezboyrc553

Жыл бұрын

I can do that one day. I've been really sick so I haven't been able to make a few videos lately. Hopefully soon I'll be back on my feet.

@Bobby2886

Жыл бұрын

@@ezboyrc553 I hope you get feeling better. I appreciate you

That truck looks great !!!!!

Great upgrade. , Yeah how come you're using that Ford grease buddy You need some GM or some Chevrolet grease💖

Sweet axles my friend.. I am new to crawling, been in r/c on off for 20+ years. Tech and parts support is so much better now. These trx4 platforms are too much fun. Custom parts amd ideas everywhere!😅 I went with the plastic axle tubes with brass outer portal, diff covers, C-hubs, lower shock mounts, weighted Hi Clearance steering and aluminium 2.2 beadlocks w/mud slingers. Oh and full skid set.

@ezboyrc553

6 ай бұрын

Thank you I appreciate. I now have a bunch of brass on the metal axles two

Those are Purdy Axel's would almost hate to get'em dirty but should keep the High Trail planted on the Crawl ✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing 👍😎👍 AOAH =Association of Addicted Hobbiest 🙏 SSPH =Stay Safe and Play Healthy My Friend

Good video

Awesome!

I like the wheels where can I get a set?

Those look amazing brother! I plan on just getting more brass parts as i go. Treal brass hub carriers and diff covers, and some brass portal covers will be pricey but should add some serious weight. Those look awesome though! Your k10 inspired mine lol!

@ezboyrc553

Жыл бұрын

I might still add some brass wheelweights. But I'm not sure how much is too much. With these tires I weighed it today and it's almost 13 pounds. My other trucks are between 6 and 8 pounds. Lol

high trail look good 👍

@ezboyrc553

Жыл бұрын

Thanks buddy.

Hell yeah that truck is wicked cool 👍🏻 DO NOT let it be a shelf Queen, that truck is meant to be on the trail.

@ezboyrc553

Жыл бұрын

You're right. I can't park it. I run it almost every day. I just put the hobbywing fusion SE in it last night. & WOW.

I'm so jealous!

the skid guard i didnt use, i got the same guard kit,, the rest are great...hold up good but do get hung up sometimes.

@ezboyrc553

Жыл бұрын

I run it today. I'm uploading a video now. Luckily I had no issues with the skid guards rubbing anything and holding me up and they protected my new axles pretty good

i seen them on your face book MV they look nice wetal axles are more lower weight best place for it

Looks great man, but you shouldn’t have used that Ford grease, now they’ll leak! 🤣

those extenders...you can get longer stub axles to compensate for those.

I Want the running vid!😅 was debating on getting some

@ezboyrc553

Жыл бұрын

Sorry that I made you all wait on the running video. Tomorrow I'm going to an open crawl and will get some good footage on a Homemade crawler course

Love your videos Brotha! What bumper is that

@ezboyrc553

10 ай бұрын

Not sure

Nice axles! I got the copper high trail. I wonder if they have color matching axles? Like a copper color to match the body

@ezboyrc553

Жыл бұрын

I think they only have this color and black and red ones. But I have seen other companies that sell just pieces for their axles individual that are different colors. I don't know if they have every that you need to build the axles.

Hey, so its been a year now since the vid was uploaded. Just curious as to how those axles are holding up? Thanks

@ezboyrc553

6 ай бұрын

I have not had any issues they are just like news still. A couple of screws loosen up every now and again. Because I didn't lock tight them but no problems.

It took me 6 months of crawling in my rock garden of natural rocks with my TRX4 Sport to wear holes in the bottom of its axle pumpkins. That was 4 years ago. Since then I have installed skid plates on it and every other crawler I have subsequently purchased. I wondered if the available aluminum axle choices accommodate the stainless steel skids because rocks grind aluminum away nearly as quick as plastic. I have also fitted DIY chassis skid plates formed/cut from the bottoms of 1-gallon 'Arizona' Ice-tea jugs on my TRX4 Sport, High Trail, and Axial 1/10 Capra. Unless you are looking you can barely see them, but they slide easily over rocks while completely protecting the motor plate, suspension link Heim joints, and the TRX4's frame rails. FYI: Approximately 2mm of ground clearance is lost with this mod.

Isn't this grease a bit too thick? I'm about to change it in my RC axles and wondering which one I should choose.

@ezboyrc553

Жыл бұрын

I've never had any problems with it.

16:50 using grease in portal housing. would it be a good idea to use marine grease. I news thinking of jamming mine 1/3 full of it. just about to unbox 1/10 high trail

@ezboyrc553

Ай бұрын

Marine grease is fine. You really don't need much in there. Some people put too much. Just coat the gears ⚙️ a little bit, and that's all it takes.

@sheldoniusSRSlider

Ай бұрын

@@ezboyrc553 is 3s safe to run or risky in any areas in regards to durability? also doe 3s hinder crawling ability or make slow speeds finicky

@sheldoniusSRSlider

22 күн бұрын

I see you got some nuts and bolts for weight. I found some heavy diesel battery posts. They are allot smaller and probably weigh more. I glued them together and used black electric tape an mounted on front bumper mount. It’s centred weight and is much lower than the top

where did you get the jack stands? They look really cool

@ezboyrc553

Жыл бұрын

My friend at metal gear RC printed them for me.

How many millimeters are the front and rear driveshafts?

@ezboyrc553

Жыл бұрын

I'm not sure on that.

😁😁👍👍

Did you have any issues getting the shocks back on?

@ezboyrc553

Жыл бұрын

No problems with it.

Do these work with the selectable lockers?

@ezboyrc553

Жыл бұрын

Yes

What brand nd size shocks did you use?

@ezboyrc553

Жыл бұрын

I now have 120 mm desert lizard shocks.

Which skid plates are those? I need a set for my trx4 high trail.

@ezboyrc553

Жыл бұрын

I got them on Amazon. Only cost around $16

@harleyguy932

Жыл бұрын

I ordered what I thought was the correct skid plates, all fit perfect, except for the center plate. It’s too short. Guess it’s for a regular TRX4. I put it on my sons. Do you have a part number from Amazon for the kit you have?

@ezboyrc553

Жыл бұрын

@@harleyguy932 That is the same kit I have I just put the short plate on the bottom anyway.

@jonesyba420

Жыл бұрын

You just need to bend the end tab flat. The hightrail has an extended skidplate due to the longer wheelbase.

@harleyguy932

Жыл бұрын

@@jonesyba420 yes that’s what I ended up doing. And used a better quality screw. Worked great

Surprised KZread hasn't attacked you for having Good Dr on in background had a few videos taken down before can't have any sound on in the back any more might just be a UK thing maybe?

@ezboyrc553

Жыл бұрын

They would if it was music. but they don't give me no s*** over a TV program in the background luckily. It's not very noticeable I guess.

What brand is the axle? Thank you

@ezboyrc553

Жыл бұрын

I don't know. Just Amazon

What shocks are those?

@ezboyrc553

Жыл бұрын

120 mm desert lizard shocks.

These are crap the metal is softer than plastic! Vitavon axles is the way to go

@ezboyrc553

5 ай бұрын

Well, I have abused these axles for well over a year now. And not had any issues they are way better than people seem to think.

@joedipietro2559

3 ай бұрын

Man I'm with you on this topic. That jerk @hfuffvnjynijd8989 is a jerk off 🤣🤣🤣​@@ezboyrc553

Your to Damm roughy on your assemblies and dismantling. 😡😡

@ezboyrc553

Жыл бұрын

What do you mean? Lol