Пікірлер

• 
  @kellykuretich6366Сағат бұрын

  👍👍😎😎

• 
  @kevincasey6876Сағат бұрын

  Ali express has a variety of driveshafts . Different lengths and pinion sizes.

• 
  @kevincasey6876Сағат бұрын

  Someone here on KZread did a FMS Chevy “bulletproof”build and posted a link to them .

• 
  @EricsRC2 сағат бұрын

  Dude... the one in the CR18P Evo pro are that fricken tiny. I cut the small body clips to size. Their smaller than the pins in Scx24.

• 
  @ezboyrc553Сағат бұрын

  I'm surprised that one is that small being it's brushless.

• 
  @EricsRCСағат бұрын

  @@ezboyrc553 me too!

• 
  @apocalypsezombyRC2 сағат бұрын

  Nice little hack!!

• 
  @Dbxrc2 сағат бұрын

  I also made a few out of some finishing nails. They were just fine snip them where you want file them off to where you need.

• 
  @ryand47862 сағат бұрын

  Cool, makes me want the Toyota pick up now , I have the Jimny and love it 👍

• 
  @ezboyrc553Сағат бұрын

  Use the link in the description and right now they're almost half off.

• 
  @silverarrowgarage76152 сағат бұрын

  Take a standard paperclip and cut a section. The thickness works…and saves your Hot Wheel collection.😉

• 
  @ezboyrc553Сағат бұрын

  Good idea. I wouldn't cut up the good ones. Just the ones that are already broke.

• 
  @silverarrowgarage76154 сағат бұрын

  Good job.. Great tutorial / visuals on how to lift it. Thanks for taking the time to share. 👍

• 
  @lowercentenary9 сағат бұрын

  Already have fms blazer 24 scale...is the difference worth getting this? Any idea?

• 
  @ezboyrc5539 сағат бұрын

  Well, I actually enjoy it more than the blazer as far as bashing it, but they are the exact same vehicle. The only difference is that the shocks are a little longer and the smaller body. But you can buy this body and put it right on the blazer. Chassis, without changing anything, the clips line up perfectly. The only problem is. I believe this truck is now discontinued & unavailable from FMS, I think, unless you find it somewhere that still has them in stock. But if you like the monster truck aspect of it, they are definitely worth buying and adding that motor.

• 
  @lowercentenary10 сағат бұрын

  Is it hard to switch out the motors for a beginner? Is it straight motor swap only or a whole buncha other stuff needed done to compensate for the increased speed? (Such as gears, links to avoid stripping etc) .Great video man!

• 
  @ezboyrc5539 сағат бұрын

  It is a very simple, easy swap. Even with little experience, you can do it very quickly. And it will be fine. It just depends on how hard you are on the vehicle, whether you want to upgrade to metal. Gears, But they do have them, and they're easy to put in as well. But mine is holding up just fine stock. It's absolutely worth the little work, and I think the motors are around $16 , i'm not sure because FMS sent it to me. Thanks for watching.

• 
  @lowercentenary9 сағат бұрын

  Thanks so much for reply your awesome! Def be getting one , swap motor and keep everything else stock😊

• 
  @greggrube294810 сағат бұрын

  Great fix on the driveshaft. Awesome video brother 😎

• 
  @ezboyrc55310 сағат бұрын

  Thanks buddy

• 
  @EricsRC11 сағат бұрын

  Large coffee and tiny trucks. That's how my Saturday mornings should be!

• 
  @ezboyrc55311 сағат бұрын

  That's how mine started. Now I need to go out and cut grass.

• 
  @EricsRC10 сағат бұрын

  Yard work day here too.

• 
  @kevinbreaker268312 сағат бұрын

  I hope your fix holds out, buddy, it looks great. One eighteen size action figures will fit in the truck 1/18 Size

• 
  @kevinbreaker268312 сағат бұрын

  She's a cat she has to Bury it and make it look pretty.

• 
  @ezboyrc55310 сағат бұрын

  She won't use the bathroom in the house anymore. Lol

• 
  @kevinbreaker26839 сағат бұрын

  Anyway awesome little truck love it🛻🛻🛻👏✨️✨️

• 
  @tonymorrow-SCRedneckRC13 сағат бұрын

  CiCi inserting her dominance LOL

• 
  @apocalypsezombyRC14 сағат бұрын

  Nice little truck, I think if I had one I would modify the bed to be shorter and do a patina paint on it. Of course lift it like you did, and maybe find a decent little brushless motor to put in it. I like it though! Great video first thing this morning!!

• 
  @ezboyrc55313 сағат бұрын

  Good morning. Thanks for watching

• 
  @TheChadSmithPodcast15 сағат бұрын

  Right when I wake up the video uploads! Morning dude happy Saturday! Hope your day is starting out good

• 
  @dawit9411Күн бұрын

  Really nice course!!! What tires are those? I am really impressed with your truck. Those are the stock shocks right and what weight oil are you using for the shock?

• 
  @ezboyrc553Күн бұрын

  Stock shocks with no oil and the tires are a Amazon version of the Mickey Thompson Baja pro.X

• 
  @dawit94115 сағат бұрын

  @@ezboyrc553 That’s impressive. I have been too scared to push mine as far as you do. But watching you do it was pretty cool. Didn’t know these trucks had that much potential. Thanks for the video and the response.

• 
  @tobster_752 күн бұрын

  The mn78 jeep Cherokee driveshafts work. There long enough and have brass inserts to fit the smaller pinion. I lifted mine and they work great!

• 
  @ezboyrc5532 күн бұрын

  Who I have to try to find them.

• 
  @tobster_75Күн бұрын

  @ezboyrc553 Ali express its the upgrade metal ones

• 
  @kevincasey68762 күн бұрын

  Are the driveshafts the same length? If the rear is longer maybe the rear one could work in the front.

• 
  @ezboyrc5532 күн бұрын

  I'm going to check when I get home and if so I will order a back one.

• 
  @kevinbreaker26832 күн бұрын

  Nice little truck.I didn't know those things leaf springs🛻🛻🛻📦

• 
  @ezboyrc5532 күн бұрын

  Yes, and they actually flex pretty good for being leaf springs. For such a small truck.

• 
  @kevinbreaker26832 күн бұрын

  @@ezboyrc553 Awesome

• 
  @JamesDirtRC2 күн бұрын

  Flat bed on that would look cool.

• 
  @ezboyrc5532 күн бұрын

  Yes, it would be. A nice wood bed. Now you got me thinking. Lol

• 
  @JamesDirtRC2 күн бұрын

  @@ezboyrc553 Hahahah :)

• 
  @GuitarsNAmmo2 күн бұрын

  Flat white fenders to match the roof and bumpers

• 
  @ezboyrc5532 күн бұрын

  I agree. I thought about that afterwards. The top is too shiny. I like to make it flat as well.

• 
  @GuitarsNAmmo2 күн бұрын

  @@ezboyrc553 I'm probably going to do that to mine as well. Thinking of adding a stencil of a girl or a skull or maybe the Stark Industries logo on the doors in flat black.

• 
  @apocalypsezombyRC2 күн бұрын

  That added a ton of clearance!

• 
  @ezboyrc5532 күн бұрын

  So much better. Now, I'm going to figure out the drive shaft issue, and it would be good.

• 
  @apocalypsezombyRC2 күн бұрын

  @@ezboyrc553 what @tonymorriw said earlier might be a good solution. Truck isn't heavy so it shouldn't put to much pressure on the drive line

• 
  @kevinbreaker26832 күн бұрын

  Nice video 👍🛻🛻

• 
  @EricsRC2 күн бұрын

  It was 102 here yesterday. Rig looks really good with the lift!

• 
  @ezboyrc5532 күн бұрын

  Holy shit you can keep that. Mid 90s was bad enough. Lol

• 
  @EricsRC2 күн бұрын

  @@ezboyrc553 lol for real! I'm good till about 90. After that... shoot me 🔫

• 
  @OGRadGrow2 күн бұрын

  Awesome rig. 👍🏾🔥

• 
  @ezboyrc5532 күн бұрын

  Thanks buddy

• 
  @rcboys6192 күн бұрын

  THAT IS BAD ASS

• 
  @ezboyrc5532 күн бұрын

  Thanks, I appreciate it. Once I get the drive, shaft figured out so it doesn't pop out. She will be pretty capable.

• 
  @rcboys6192 күн бұрын

  @@ezboyrc553 I have the 1/12 Willy’s jeep I want to lift it too.

• 
  @tonymorrow-SCRedneckRC2 күн бұрын

  Maybe cut and slot ballpoint pen barrel to make the driveshaft end a little longer

• 
  @greggrube29482 күн бұрын

  Awesome video brother 😎 rig looks great with the lift. I think the fenders and the roof would look good black

• 
  @theRCcarshow2 күн бұрын

  love your garage bro. its beautiful

• 
  @ezboyrc5532 күн бұрын

  Thanks buddy

• 
  @WayToManyAssassins2 күн бұрын

  Is it still holding up? No clogged passages?

• 
  @ezboyrc5532 күн бұрын

  No issues. still going strong. It works great. It's been in quite a while now.

• 
  @RCplamodel3 күн бұрын

  Thank you for sharing a great video with a great car!!! ~~~^_^😊😊😊

• 
  @richieigl3 күн бұрын

  Thanks, got my Traxx yesterday and installed them. Today i went into the woods and two of them kept slipping. Now they are right.

• 
  @ezboyrc5533 күн бұрын

  I hope it helped, but to be honest, they will still slip most likely. I was actually thinking about putting them back on my truck again for a while. Because this has been a while but I have so much weight on my truck. I think that will cause it to slip more. Maybe the lighter the vehicle. The better for the traxx.

• 
  @rcboys6194 күн бұрын

  I MAKE THE DUCTS FOR THOSE ENGINES IN THOSE JETS

• 
  @ilnotfriendlyli88104 күн бұрын

  Where can I get the fusion and what kind of fusion

• 
  @ezboyrc5534 күн бұрын

  I get my fusions from either Amazon. Or Amain fusion SE 1200kv

• 
  @ilnotfriendlyli88104 күн бұрын

  Thanks a lot I got it I’m just starting out so I want to get sum that’s going to work for me

• 
  @ilnotfriendlyli88104 күн бұрын

  And any tips you want to let me knoe are welcome thanks in advance 👍🏽💪🏼

• 
  @petechipps97704 күн бұрын

  I bought my Mashigan used. Is it supposed to have a panhard bar?

• 
  @ezboyrc5534 күн бұрын

  I will have to check. I think they have a panhard bar and a four leak set up.

• 
  @andyrichey11925 күн бұрын

  I thought I heard somebody stepped on a frog😁😁 that was super cool specially the slow motion. Yep, I’ll catch you on the next one until then. Peace and chicken grease😁👋👋😎

• 
  @andyrichey11925 күн бұрын

  First thing I did put Bigfoot stickers on yeah, that’s awesome dude yeah, I’ll have to put the speed motor in mine👍👍😁

• 
  @ezboyrc5535 күн бұрын

  I need some bigfoot stickers. The speed motor is awesome. big difference.

• 
  @andyrichey11925 күн бұрын

  Awesome I do believe I have the speed motor. I have to look and see. Appreciate as always you sharing.👍👍

• 
  @solid_soldier855 күн бұрын

  The monster has awoken!!!! Big Foot stickers for sure!!! Thanks for another great video!!!!

• 
  @ezboyrc5535 күн бұрын

  Thank you for being there. I appreciate your support. I'm gonna try to find some bigfoot stickers. Lol

• 
  @carltruva88725 күн бұрын

  Love the farting space alien.. That fms smasher is really fast. Love the channel Ezboy thank you for sharing

• 
  @ezboyrc5535 күн бұрын

  Thanks for watching. The fart alien was a good cover-up. Lol

• 
  @tonymorrow-SCRedneckRC5 күн бұрын

  That thing rips now

• 
  @ezboyrc5535 күн бұрын

  It rips like me at the end of the video. Lol

• 
  @JamesDirtRC5 күн бұрын

  Mud Pit, that thing would throw mudd.

• 
  @JamesDirtRC5 күн бұрын

  2 fast little Monsters... Yup you need a track now, couple jumps.

• 
  @ezboyrc5535 күн бұрын

  I agree. I'm going to come up with something.

• 
  @JamesDirtRC5 күн бұрын

  OMG Crash into the desk was to Funny

• 
  @ezboyrc5535 күн бұрын

  That one caught me off guard. I think it's more than double the speed now. I totally was not expecting it.

• 
  @EricsRC5 күн бұрын

  Almost spit out my coffee on that crash lmao!!!

• 
  @JamesDirtRC5 күн бұрын

  OMG i laughed so hard my Dog barked. LOL

• 
  @ezboyrc5535 күн бұрын

  I know, right? I was not expecting that much power to come out. I can't believe my microphone picked up the fart at the end. Lol

• 
  @JamesDirtRC5 күн бұрын

  @@ezboyrc553 The Fart LOL Nice Mic LOL

• 
  @craigpimlott2045 күн бұрын

  Power to weight ratio that must be faster than a 1:1 monster truck

• 
  @ezboyrc5535 күн бұрын

  We're equaling about 3000 horsepower. Lol

• 
  @apocalypsezombyRC5 күн бұрын

  cool little truck man!!

• 
  @TrokaRC5 күн бұрын

  8:15 The cat taking a look.