Nice rip bro that was some crazy air the sledge is definitely turning into a little beast sorry about your damages I'm sure you'll get her up and running in no time 🚀🔥👊

It's great how much they have changed the MX track around. You have some great new jumps!! Your Sledge was getting some hang time!! Great video!! 💯💯😉

@BarstoneRC

2 жыл бұрын

Yeah the track is a ton of fun now it’s nice to have some new stuff to run

Wow man, this thing is flying well!! Fun to watch Dave.

@BarstoneRC

2 жыл бұрын

Thanks buddy I appreciate it and thanks for watching man

Dude Bars&Tone! I’m very impressed! Good job!!! I had to take the kraton down to the chassis, mud got in everything! I’m feeling a little better. Hope you are too! That is insane driving Brother!! 👊🚀🚀🚀🏆

@BarstoneRC

2 жыл бұрын

I’m starting to feel a little better. I’m terrible with cleaning the cars like that I can honestly say I’ve never torn one apart to clean it LOL I’ll just spray it harder with the water LOL.

What a Great vid. Thank's for Sharing David 👍👊✌💯

@BarstoneRC

2 жыл бұрын

Thanks for watching buddy I really appreciate it

Awesome Beat Down Brotha! That Sledge is a tank now!🔥🔥🔥🔥🔥🔥⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️⚡️🙌

@BarstoneRC

2 жыл бұрын

Yeah this car just keeps getting better and better and having a lot of fun with it thanks so much for watching brother I appreciate it.

I was waiting for this video. It took a lot and was flying high. Love it.

@BarstoneRC

2 жыл бұрын

I’m really impressed with the car it’s been a lot of fun

awesome bash! lots of fun. thanks for punishing the parts!

👊👊👍💪

David you gotta stop those last jumps, they get you every time it seems. LOLOL.

@BarstoneRC

2 жыл бұрын

Yeah they always do seem to be the demise of the car lol

I can feel it hit ..... then it drives away . Wish it left a smoke trail like a stunt plane .

@BarstoneRC

2 жыл бұрын

I’m gonna have to try that attach some sort of Smoke bought the back of it

That sledge is starting to look like a winner now it’s m2c boosted 👍👌👍

@BarstoneRC

2 жыл бұрын

Yeah this car is getting better and better and more and more capable. It always handled nicely and had great control just needed a little bit of fine-tuning

Cool RC and setup, awesome bashing

@BarstoneRC

2 жыл бұрын

Thank you buddy I appreciate it and I hope you have a great day man

@islandrc-duke1972

2 жыл бұрын

@@BarstoneRC thanks and same to you brother

Those Rocket/Hobbstar motors are killer. They do get very hot but the torque is crazy

@BarstoneRC

2 жыл бұрын

Yeah I was surprised with this gearing it ran great and it did get a little bit warm but not too crazy

Nice triple at the end lol sucks wen it breaks but great bash bro 🤙👊💪

@BarstoneRC

2 жыл бұрын

Yeah break it just happened but I had fun doing

@bigaltough

2 жыл бұрын

@@BarstoneRC u look like u have a blast ever time u go to that track no matter which car u have, I need to find some big jumps like urs but I need to get my 6s exb bk up and running again I still have no esc for it 😥😭

awesome jumps mate ... need to find me a mountain like you got there LOL

@BarstoneRC

2 жыл бұрын

Lol it’s sweet!!

I can’t wait to get my hands on the m2c stuff. My chassis is wavy and I don’t want to buy a new one until m2c

@BarstoneRC

2 жыл бұрын

Yeah I got my chassis yesterday I’m gonna get it put it up here over the next day or two. Looking forward to testing it out

Eh, nothing the Sledge can't come back from. Nice rip man!

@BarstoneRC

2 жыл бұрын

Thanks buddy

Ahhh not m2c chassis sledge I got excited to see it get tested there

@BarstoneRC

2 жыл бұрын

No I just got the chassis yesterday I have been gone for a week for work

Great video! How’s the motor holding up? Can it takes 8S power?

@BarstoneRC

Жыл бұрын

I decided to go with the stock motor with the max six and I like this set up the best so far

Hi I wanted advice with 46/17 crown / pinion coupling with hobbiwing max6 you say better 1700kv 4074 rocket engine or stock engine to get the most, with less heating. I will be grateful for your concrete answer. greetings friend

@BarstoneRC

Жыл бұрын

I’m running the max six ESC with the stock motor and love it. It’s a perfect combination.

how do you secure the pinion....even the D-bored ones AAAALWAYS get loose on it, no matter how long the loctite cures.

@BarstoneRC

2 жыл бұрын

I never have mine come loose, I clean everything really well with brake cleaner first let that dry for a few minutes and then apply the Loctite to the gear and the screw and then let it dry for at least 24 hours

Soaring brother huge sends! I need that motor I’ve been running the 2050 in my tekno truggy on 6s usually run it in 4s. 2050kv is to much. That motor sounds perfect? What one is it length wise. Thanks man

@GuyonaMoose

2 жыл бұрын

Oh man that’s some carnage!! Huge! M2c hinge pin kit coming soon? Know they are ultra beef. Gottem in both my Arrma and tekno

@BarstoneRC

2 жыл бұрын

Yeah the hinges pins are a good and bad thing when they break a hinge pin is easier and cheaper than a arm but I’m not sure where a good line is or what the best would be to upgrade

Hello from southeast alaska how's it going today bro

@BarstoneRC

2 жыл бұрын

Well to be honest I’ve been better buddy, I wasn’t feeling good and find out I got Covid today

@hellofromsoutheastalaskarc7517

2 жыл бұрын

Aww man not good. Prayers for strength bro. I hope you heal well. You will be in my thoughts today

What gearing are you using? I will go up from 13 to 15 with Stock Electronic and am look7ng for Max 6 and 49xx, for going on 8s

@BarstoneRC

4 ай бұрын

20 tooth

@marc1981er

4 ай бұрын

But, could you tell me, when using the 4990 engine, you have to turn the motor to the other side and switch it with the Esc right? And then it is needed to cut a Part out of the chassis so that the Main gear can move. Option chassis are havin it from the beginning. Aint So?

@marc1981er

4 ай бұрын

​@@BarstoneRCi heard about that spezial mount for put it to the other side for Motors like 4985 or 4990...u using it like that, when you have the 4990 using?

When can I buy the Motor Mount? IT isn Not online AT m2c

@BarstoneRC

2 жыл бұрын

I don’t have any information really on that I only test the stuff

Pignone/ corona? Intanto complimenti vero 🚀

@BarstoneRC

Жыл бұрын

19 tooth

@nicolomasto7628

Жыл бұрын

@@BarstoneRC Crown?

@BarstoneRC

Жыл бұрын

Stock size

@BarstoneRC

Жыл бұрын

I don’t remember what size stock is off the top of my head

Another EPIC Bash test on the prototype M2C goodies Bro David. You caught some massive airs Bro! Sledge is agile and had some groove with the new system in her. I love Avery's hexes with extended wheel nuts. I might have to try that motor. How are those wing mount and bumper compared to 3DRC in terms of quality? Another awesome upload my friend!

@BarstoneRC

2 жыл бұрын

This wing mount and bumper are working really nicely on this car and yeah really enjoying this car and it just keeps getting better and better

Hello, did you used a Mount for the max 6 in the sledge, what you took??

@BarstoneRC

4 ай бұрын

Stock motor mount with M2C racing esc mount

@marc1981er

4 ай бұрын

Thats Not Stock Motor mount

@marc1981er

4 ай бұрын

Motormount m2c too?

@BarstoneRC

4 ай бұрын

Oh yeah I did change it out but it’s not necessary

@marc1981er

4 ай бұрын

@@BarstoneRC hey, i look for a mount for max 6 esc in my sledge, cant find...i also look for a 49xx motor, do you know, if the 4990 engine will fit? Then i need to turn the engine around and switch it with the Esc and dont know if the 4990 engine fits...there is the gpm mount for that Kind of motor and i also have to cut a piece out of the Stock chassis, i think...for the turning of the Main gear...the Option chassis have already that space for the Main gear but that is too much work. Best wishes from germany m8

Why no fan on motor?

@BarstoneRC

2 жыл бұрын

I don’t really believe in fans to be honest with you if you gear it properly you can run them and let them cool down between bashes

@kaiarneberg9203

2 жыл бұрын

@@BarstoneRC hmm ok that's a new one for me. 😊 i love fans. It kinda would be the same as if your real car came without radiator. It needs cooling. And you can drive harder, go faster, and your equipment lasts longer. Esc have fans. Motors need them too 😊