What a brilliant video. I am not thinking of converting my T6.1 but I just couldn't stop watching this. Well done guys. Now to your other vids!

Yes Leigh. Loving the amount of content you are putting out 👍🏻

Another excellent video Leigh 💯

Excellent video

A fair bit of work, I had a local garage do mine but it could be a DIY job I guess. Thanks for sharing 😎👍🏻

Thanks that what I needed to convert my T5

Excellent video you did my Kombi seat conversion a few years ago now great to see how you did it

@CombeValleyCampers

7 ай бұрын

Glad you enjoyed the video, and thank you for your custom :)

When installing that seatbelt bracket, you can first draw the shape of the bracket, then first drill the holes for rivets (can be also top right, bottom left - more like diagonal), bracket center line can be marked with some colorful pen. Then via predrilled rivet holes it is visible in what position bracket currently are, and is easy to control when rotating the bracket. You can hold it with something suitable via these rivet holes while tighten the middle bolt. Then drill these holes deeper - through the bracket, and install rivets..

Lee and gang nice video its given me answers to multiple questions i've around fitting those seats, whats the chance you do a one piece floor for a LWB

@CombeValleyCampers

7 ай бұрын

Yes, absolutely. They are listed in the description of the video :)

Do you recommend the swb over the lwb as a daily work van ?

Those seats aren’t from a Caravelle, they’re from a Shuttle. The Caravelle uses sliding rails. But still, top video man.

Hi guys, we've got twins on the way and have sourced an early T5 Kombi, which unfortunately does not have ISOFIX points in the 2+1 rear seats. Do you have any advice on where to source replacement seats with ISOFIX? Many Thanks!

Hi, what brackets would be required to just fit the double rear seat and not the single?

Can you have the seats the other way around - so the two is on passenger side?

Hi what’s the cost of what you’ve just done labour only plus the flooring. Thanks

Anyone know where I can find how to fit both top and bottom rollers on sliding door.

are you not supposed to batten the floor before the ply ?

Hallo, where can I buy this kit. Thanks a lot

brilliant that. are they now what they call crash tested ?

@Co074K4t5

7 ай бұрын

They're factory standard so I would sa that they would be TUV approved.

Great video, thanks. How long did it take you, roughly? trying to decide whether to take to a garage or do it myself. Cheers!

@CombeValleyCampers

3 ай бұрын

Took 3 hours including filming

@muff_jr5760

3 ай бұрын

@@CombeValleyCampers Good to know! Thank you

im thinking of buying a panel van and doing this as may be the cheaper option than buying a kombi. i have a 2 month old abby so need safe isofix also. also how doss this effect insurance and log book etc? ive written this before watxhing all video so may cover

@tonygould580

12 күн бұрын

I believe the newer t6 2nd row seats have isofix fittings. Make sure you're sitting down when browsing to find some though.

Is there a way to make the two passenger Seat sliding forward and backward? On the web there are sliding and swivel bases for the front double seat, but I’m not sure is suitable for the double seat shown in this video. Any suggestion?

@CombeValleyCampers

2 ай бұрын

Yes, the new Rusty Lee sliding swivel base is available from our web shop, and our installation video is coming up very soon

@bada8007

2 ай бұрын

@@CombeValleyCampers Oh Nice to know, so the fixed second row of the caravelle can be turned in to sliding seats with your piece of equipment. would you please add the link of the base you sell on your web site?

I did the exact opposite, had a brand new then, 70 reg lwb fiat Talento combi van ( Renault Traffic / pre Stallentis , Vauxhall Vivaro clone ), professionally fully converted to a campervan. Therefore i have the combi back seats, brackets, bulkhead etc all spare if somebody wants to buy them from me cheap , offers ?

Do you have to mention this as a modification to your insurer?

@ian_morg

7 ай бұрын

Yes, any modification needs to be told to your insurer, also you’re now changing the number of seats so definitely. Aplan as they were when I had my van were brilliant and it was just an email to them to add each mod on from bare panel van to full on camper.

Is it posible for headlight to be changed from round to square shape on t3

@CombeValleyCampers

7 ай бұрын

Yes, very easily. Have a look at campervanculture.com for available lights

@vagpen88

7 ай бұрын

@@CombeValleyCampers thanks for the replay 👍

thank you for this video, it helps me a lot because I didn't think that this model could be made into a camper... you are amazing and professional in mechanics as well as in video making...🙏🙏🙏👍💯💖🫡