Why not add a tutorial scenario about these systems in the game? That would really help!

@ace-paidinfull5240

3 жыл бұрын

Exactly

@george8343

3 жыл бұрын

Yeah. That would be really helpful. Without the signal thing on its bit of a gamble if the signal is for you or not

@TheNoGamer44

3 жыл бұрын

Because it's too complicated and would take a long time to learn these things.

@alexb24099

3 жыл бұрын

Yes

@Robin-vl2pr

3 жыл бұрын

So long like we are waiting for steam engines and multiplayer? 🤔🤣

Thanks Matt, great tutorial. Timestamps: (structured as Matt presented it, but where he later gave tips during the driving, I've added references to those in the theory part as well, I hope its not too confusing) 06:40 - Introduction 09:04 - Theory - what is covered, 09:40 - Theory - Signals (HP and KS systems 11:35 - Theory - KS Signals 12:43 - Theory - HP Signals 15:16 - Theory - Speed Limits (shown on German signalling) 1:15:24 - Theory - Signal showing speed limit of 120 now and 100 km/h at the next signal 58:05 - Theory - Distant signal sign, and countdown boards 16:16 - Theory - How to practice reading signals in preparation for using PZB 17:45 - Theory - SIFA 21:06 - Theory - PZB 24:42 - Theory - PZB - Magnets 26:02 - Theory - PZB - Start Programme, Restricted Monitoring and When to Acknowledge 27:00 - Theory - PZB - Rules for releasing from Start Programme (and Restricted Monitoring) 1:02:45 - Theory - PZB - Recovering after an Emergency Brake Application 1:24:52 - Theory - Talent 2 - Starting Programme displayed on the display panel 58:40 - Theory - PZB - Acknowledging - tips on the timing for pressing acknowledge 1:12:05 - Theory - PZB - When speed warning signs need acknowledging 1:15:48 - Theory - PZB - Flashing green and notice of a reduction to 40 km/h. Needs acknowledging and reduction to 85 km/h within 23 seconds. 1:16:47 - Theory - PZB - 40 km/h at this signal, 40 km/h at the next. Needs acknowledging. 1:17:25 - Theory - PZB - Yellow signal needing acknowledging 1:18:30 - Theory - PZB - Approaching a red light, 500 hz magnet light comes on 59:50 - Theory - PZB - 2 theories of either holding down acknowledge as you go through the signal, or acknowledging when you have gone past it (both will work) 33:58 - Theory - PZB - Approaching a Red Signal 56:56 - Theory - PZB - How can you tell if you need PZB mode U or M? 36:00 - Theory - LZB 37:22 - Theory - LZB Activation 38:02 - Theory - LZB Operation 40:14 - Theory - LZB Ending 43:05 - Theory - AFB Cruise Control 1:16:05 - Theory - R & F keyboard controls for changing AFB speed 1:27:25 - Theory - Talent 2 - Tempomat (like a simplified AFB) 1:33:36 - Theory - Talent 2 - Tempomat increase/decrease speed using R+F 1:37:05 - Theory - Talent 2 - Tempomat Enable (Ctrl+R) 45:00 - Driving 46:52 - Driving - ICE 3M - Turning on the safety systems 47:16 - Driving - HUD - LZB B indicator and PZB 85 indicator 48:24 - Driving - ICE 3M - Enabling AFB on the MFD 49:30 - Driving - ICE 3M - Starting using AFB and PZB Start Programme 50:48 - Driving - Acknowledging SIFA 51:47 - Driving - Speed Restriction warning sign 52:18 - Driving - ICE3M - LZB enables itself due to the location on the route 1:00:35 - Driving - ICE3M - LZB upcoming speed reduction 1:03:30 - Driving - ICE3M - LZB is ending, resetting AFB 1:08:55 - Driving - ICE3M - Upcoming speed restriction to 120 (AFB, no LZB) 1:13:40 - Driving - Slowing down for Aachen (the destination) 1:13:50 - Driving - ICE3M - Changing the Destination Sign 1:14:48 - Driving - Flashing green with speed reduction to 120, doesn't need acknowledging or dropping to 85 1:15:30 - Driving - ICE3M - Throttle lockout if you apply the train brake and throttle at the same time (not a good thing) 1:15:48 - Driving - PZB - Flashing green and notice of a reduction to 40 km/h. Needs acknowledging and reduction to 85 km/h within 23 seconds and then 40 km/h by the next signal. 1:16:47 - Driving - PZB - 40 km/h at this signal, 40 km/h at the next. Needs acknowledging. 1:17:25 - Driving - PZB - Yellow signal needing acknowledging 1:18:30 - Driving - PZB - Approaching a red light, 500 hz magnet light comes on 1:22:20 - Driving - Talent 2 1:22:40 - Driving - Talent 2 - Turning on the safety systems 1:22:40 - Driving - Talent 2 - PZB display showing that is is enabled and the PZB mode 1:22:20 - Driving - Differences between the PZB display on ICE 3M and Talent 2 1:24:52 - Driving - Talent 2 - Starting Programme displayed on the display panel 1:25:40 - Driving - Matt ends the PZB Start Programme with PZB Frei (END key) 1:27:55 - Driving - Talent 2 - Display dark mode 1:27:25 - Driving - Talent 2 - Tempomat (like a simplified AFB) 1:33:36 - Driving - Talent 2 - Tempomat increase/decrease speed using R+F 1:37:05 - Driving - Talent 2 - Tempomat Enable (Ctrl+R)

@31erHaschkeks

3 жыл бұрын

Thx for your effort. :)

@Flightsimmovies

3 жыл бұрын

This should be pin for sure!

@FDNY101202

3 жыл бұрын

You da real MVP

@dominiktuchowicz7680

3 жыл бұрын

Thank you, appreciated!

@andrewhoffmann2077

11 ай бұрын

MVP

I've watched this 4 times now, and managed to do a route error free. Thanks so much Matt. I've gone from knowing nothing about PZB/LZB/AFB. You've done a grand job.

The game becomes so much more fun with these systems.

Lovely to have a good refresher on PZB/LZB signaling. I have always enjoyed Matt's tutorials; I think he does a great job explaining things. I was wondering if we could also see a similar kind of tutorial for North American and United Kingdom signaling systems. Even though these systems aren't as safety system "heavy," I believe it would benefit many to gain more immersion from the software.

I am so glad that you have done this Matt, I have struggled with LZB PZB and this has helped me greatly. I think your presentation is great and I enjoy any of your tutorials.

Dude.. im new to TSW at all.. I bought a copy of TSW 3 and I like it! I played for a couple of days with AFB SIFA LZB and PZB. Only PZB i didn't understand.. i was partially reading signals and I looked up a lot on KZread if i had questions. And I was looking for a deeper explanation of PZB. And then i found you. This video. And I'm half way through your video already writing this comment 😂 This video ALREADY half way through is a Goldmine of information to me i didn't know. Like reading signals properly 😅😂 Your explanation is clear, on point and thorough! ❤ So I subbed of course. And what I'm going to do is skip all the AFB LZB PZB and SIFA stuff for now, and start first learning how to read signals! Thank you so much for making this video. This was exactly what I was looking for!😊

I absolutely love this style. I used to have to drive with the manual on my lap and pause at each signal XD. The tutorial is super easy to follow

I think this was really well explained and the perfect mix of show and tell (or tell and show!). The only thing that could be improved is if the routes that were done after the powerpoint actually contained more adverse/wider variety of signals etc.

One note: Tempomat (when pressed) works exactly the same as the AFB when using R/F (increase/decrease) to control a speed. It can slower a train as well :) Great video, Matt. More theory makes the game fuller.

Very informative. The amount of explanation was spot on in my opinion. Would love to see more videos of this variety! Keep up the good work!! 😁👍

i’ve been going over this video for a few days now trying to learn all of the systems. Right now I use sifa and i'm getting use to pzb. this was a pretty good explanation of the safety system it definitely made me want to give it a try.

I like the german routes! Best stream ever about pzb and sifa ! Hopefully more german routes in this game!

Matt. I love the commitment from your company. Service care and support is always difficult. I certainly appreciate what you do and how complicated all this stuff is. The technical challenges are there and the expectation from your community is very high. I for one have no complaint other than for loyal supporters of your software we do deserve some discount. I’m on Xbox and brought all routes and all trains bar three or so. My favourite game and actually my goto game along with assetto competizione.

@imaginox9

3 жыл бұрын

The sales are not in their control, they already explained it: apart from discounts such as "cheaper if you got the first game" which are controlled by them, periodic sales are decided by the store owner (Steam, Sony or Microsoft), and Microsoft tends to do very few sales where Steam does lots of sales. And Sony does quite a fair amount of sales too.

I needed this. You explained it perfectly.

Really awesome tutorial Matt! Thanks! This seems a little easier to understand now lol. I’m going to try it on my next run in-game!

Thanks for the video. I was always put off German routes because of the safety systems, but this has helped so I'll give it a try

Wonderfully explained tutorial! It would be nice if we also did this for British and American signalling 😀

Thanks Matt. Excellent! Great info! Keep up the good work!

Really good tutorial that had actually got me intrested in German signaling! Great job👍

Ty a lot. Never used theses options, i'll work with now. Great thanks from France.

Thanks Matt. Learnt a lot today.

Matt, thank you for doing this video i really appreciate it since the game doesn't explain it at all. I have always wanted to give it a go but i never really understood it, and hence my train would always slam on the brakes lol

Very cool video. Thank you very much for sharing!! Very interesting.

This game was free in the epic store lately, I'm really impressed by the level of detail of both simulator and graphics ♥️

Great video Matt, I'm pretty right with PZB but it was a good refresher.

Thank you now i can fully understand the signals and PZB

Matt, this was a great help in trying to understand the German system. Has the team gotten your slides posted yet?

Great job. Demystified!

You've been a great help. Thanks.

Great video! Learned a lot with it.

Top tip: "PZB Wascham" after you pass a flashing signal. Before the signal start reducing speed. If your speed is not within the restricted range in 23s, Zwangsbremsung.

After watching this I’m definitely giving in a go 👍

Thanks for vid! Very useful!

To quote the late Leonard Nimoy "fascinating" thank you sir.

After watching this, watch PTGs rail one. This video clearly explains the start we need to watch PTG’s complicated vids

The ICE 3M in this game is so much better. At the left display, you choose different voltages systems. I hope to see some Dutch routes in the future.

@bjorngroen2724

3 жыл бұрын

Who knows 😀 I saw in the roadmap that a Swiss and French route are in the planning, so maybe the "world" in Train Sim World will finally make sense. Sadly you can't acquire licenses from the NS easily :(

@ember_shep8181

3 жыл бұрын

@@bjorngroen2724 yeah. TGV duplex is planned. Plus the EMD F7 is planned, one of the last few still running freight to this day.

@bjorngroen2724

3 жыл бұрын

@@ember_shep8181 Saw that too, both are interesting in their own way 🙂

Really good tutorial thank you

Get. This. Into. The. Bloody. Manual xD Still relevant! Thanks for a really thorough and useful tutorial video ;)

Nice video!!! It really helped thx a lot!!!!

This is now quite old, but it’s still very good. Thank you.

@ser_igel

Ай бұрын

the tutorial is old but the signaling system, PZB and even the velaro family are much, much older so this tutorial will be relevant another ten years

6:20 is when it starts

Thank you Matt its been a month since I turned on any Safety Systems in TSw and now i cannot enjoy any other trains now..........

Thank you for this

excellent video thanks

Great video! Can we please see more of these for different trains in the future?

Thanks Matt. Learned a lot. North American signalling please

Nice tutorial. I think it was time that someone did a more professional one. I did mine ages ago and really put no effort into editing or anything of the sort, but I was still surprised that quite a few people watched it. So the demand is obviously there. By the way: If you want to train PZB, I think the easiest way would be the new scenario editor. Make yourself a fast express service that runs the entire route with no stops, and put a train right in front of you that stops at every station. That should give you a lot to do with PZB, especially if you drive a fast accelerating train and give the AI something slow.

Helped me out thanks did a few runs without the brakes slamming on in the Ice and the Talent. Very rewarding going to get more German add ons. Is Munich - Augsburg a good add on?

When I first watched this, I dreamt of being a Train driver in Germany. In less than 2 weeks I start my training at DB

@zrspangle

Жыл бұрын

Good luck my friend!

@ser_igel

Ай бұрын

nicccee i hope you will always arrive on time

Excellent tutorial. Well done. Question: on Bakerloo my mouse is way to sensitive on collective. Changes with vibration of the train. Ideas? Also - on ICE, HUD speeds in KPH. Display is in MPH???

@imaginox9

3 жыл бұрын

On the ICE it's always km/h, mph is basically unknown, and unused outside of the UK and the US

Very good 👍

Can you post a cheat sheet image of all of these signals? Or share your PPT?

I come from Germany bu its nice to know.

I'm driving this now while watching and I absolutely cannot tell if SIFA going off is in my train or Matt's.

Great tutorial Matt how about one on overlays on PC I have the option to config but nothing in the window to select ?????

Thanks for this tutorial! Really appreciate it! I have TSW 2020, TSW 2 & TSW 4, but am still playing TSW 2020. I've spent a solid 400 hours playing but this is the first time I've actually looked into using safety systems. After watching your video here I'm curious how PZB/LZB and Sifa systems are activated and operated on trains like BR182 DB, BR146.2, BR185.2 DB, BR143 and 766.2 DBpbzfa DB. I'm currently driving the BR185.2 and I can see on the wall on my right; - LZB/PZB Acknowledge Release - LZB/PZB Release - Sifa button Then on the dashboard on my left the PZB/LZB controls and AFB control. But how do AI activate these? How do I turn AFB on? I would assume that all these have similar way of activating and maintaining these systems? Is there a tutorial for these anywhere, like the one you did in the video here for the Ice train? I guess I'd love to be able to view complete tutorials for each loco in this manner? Are these available? Thanks again!

"When you pass one of these LZB signs" Matt pointing at his picture there covers the LZB sign😅

Please do the tutorial for US signalling also.

Hi what do i have to do in order to get moving when i got a emergency brake? greets from austria

at 1:24:48 why is the signal saying "at the next signal stop", but the next one is green?

@connectingwings7212

3 жыл бұрын

Maybe the virtual signaller has extended the signalling pathway

In the PZB German Train Point shaped influence System you got 3 modes. It protects you not to run over the red signal. The first is the Under Train Mode got the 55 indicator light and you got 38 sec since you drive through the yellow Signal/1000 Hz to reduce the speed from 105 km/h to 55 km/h in 700 meters while the 1000 Hz indicator light is activ. You can free from the blinking 1000 Hz indicator after 700 meters with the free button. After than appears the 500 Hz indicator light 150 meters before the signal. There you have to reduce your speed again from 35 km/h to 25. The next is the Middle Train Mode with the 70 indicator light. Here you got 29 sec to reduce the speed from 125 km/h to 70 km/h and also 150 meters 500 Hz from 45 to 35 km/h. the high Mode with the 85 indicator light you got 23 sec to reduce the speed from 165 km/h to 85 km/h and at the 500 Hz indicator light 65 km/h to 45 km/h in a limited time before reaching the 🛑 Signal.

What I'm witnessing is that sifa is the German version of the aws system on the class 377/4 train in east coastway And the non HST train on great western railway

its good to see autsim has so much representation

Would love to see a KVB and Crocodile tutorial for TVG and SEHS.

Pzb is crazy, will it be a bug or what? Scenario KÖLN Hbf - Aachen Hbf with talent2, I am about 160 - 163 km / h when I arrive at a flashing green signal and speed reduction to 80 km / h, before I even cross the signal I start to brake, pass the signal and press the PZB recognition, I continue to brake, I bring the brake to 75% over it is impossible for wheel slip, but despite this, the train after a while will activate the automatic brakes. Same route, a little further on even the limitation and at 60km / h, it is practically impossible to slow down so as not to trigger the safety braking. Could it be a bug or is there a way to avoid this?

There is one part on this route with the talent 2 and pzb I don't understand. It's from when the top speed is 160 and like the first signal that's shows its going to 80 you need to acknowledge so than you need to brake very hard to go to 85 in 23 sec. Is there a signal in missing at seeing.

Tutorial scenarios separate PZB and LZB Green run and chace yellows. Mastery class to both on. the easiest to learn is SIFA. also if you like to drive sand patch AC4400CW press [CTRL+Shift] + [numpad ENTER] to enable alerter

Oh tust helps a lot

at 1:08:57 if I turned off the HUD then how can I know the upcoming track speed limit change? ? because when I see the sign beside the track the speed limit changed at the same time, I don't have time to reduce my speed

@dbclass4075

2 жыл бұрын

Look out for advanced speed limit signs. They are: • located 1km before the speed limit reduction • inverted triangle with black text on yellow background (1:09:14) • yellow digital display (1:16:29) Speed limits are marked: • square sign with black text on white background (1:09:43) • white digital display (1:16:48, the white "4" above the signal) Note: increase of speed limits are unlikely to have an advanced speed limit sign. In any case, add zero right of the written number to determine the speed limit. Exception is the automatic wash; 5 is 5 km/h. Don't expect the train to be clean after zooming past at 50 km/h.

Looks like an improvement over the Train Simulator implementation... But in terms of being able to drive a train on an unfamiliar route in Germany, it looks like a key aspect to that still isn't implemented. I mean, you can fake it due to other stuff in the game, but the thing is, from what I remember hearing you're not actually allowed to run the train if the route map system (forget what it's called) isn't functioning. And if it genuinely can't be fixed in a reasonable timeframe you have to go into the station building and pick up a printout of the route maps; The type they used to use before they had in cab computerised equivalents. These maps are critical because they tell you where stations and signals are along your route so you can anticipate them properly. This is also why the distance markers are crucial (another flaw in Train Simulator's german routes is how many routes are missing large numbers of distance markers) German routes usually have a distance indicator every 200 metres. Combined with a map that tells you where the signals, speed restrictions stations and the like are on the route, as long as you pay attention to the distance signs and know how to read your map properly you should never be surprised by what you'll encounter even on a route you've never driven before. And that is a major factor in WHY German train drivers can run unfamiliar routes compared to most of the world where you're only allowed to run a route you've had route-specific training for. Yet train simulator never implemented the in-cab mapping system at all, and often omitted the route distance markers, so it became quite a headache to do it properly. Doesn't look like TSW2 has fixed this. Though hopefully at least the route distance markers are placed reliably. (That at least allows the hypothetical use of paper maps.) Here's a fun test if you can find the information on how to do it properly; Find the official procedures for driving a train in a given country, then start the sim and turn off all UI, and see if you run into problems. I can bet you'll almost immediately have a problem with german trains, given what the procedures look like. Of course, in some cases you'd have printed documents in a real train, so without them you might not be getting the expected results anyway. But for a modern German train you generally shouldn't need them, because it's already accounted for in the computer systems... Yet all that does in the sim is show up which of those systems isn't actually implemented. Ah well.

@connectingwings7212

3 жыл бұрын

I totally agree with you, but where'd you got the thing that German Traindrivers don't need route training - they certainly need it, it's called Streckenkenntnis, and there was also a big shitstorm that a few private freighter train companies let their employees drive on routes they were unfamiliar with

The optimisation on Xbox one X means the middle gauges go bleary in the ICE so you can't read what they are saying. I hope they fix this.

Is their a easier way of opening and closing doors cause that switch is very touchy. I've changed the keyboard settings to my likings for the doors...but still won't work. So the speaking voices are in a different language...can I change that to English??

I tried Aachen Turnaround and when approaching the third stop the PZB stops my train when approaching 60km/h. Do I acknowledge sometime before there? I’m having trouble getting it down on the Talent 2 but had little trouble on ICE 3.

@dbclass4075

2 жыл бұрын

Did you pass a distant signal showing Advanced Caution (double yellow) on your way there? Is the main signal ahead Danger (red)? If so, you run over 500 Hz magnet, which requires you to slow down to 45 km/h in about 300 meters. Since you are above the (PZB) limit, it assumes you did not see the distant signal and stops you out of precaution.

@TrainScott

2 жыл бұрын

@@dbclass4075 I figured out that I didn’t acknowledge a flashing green and wasn’t slowing down fast enough.

Matt: I'll only cover PZB mode O, the passenger type Matt 5 minutes later: You have to slow down PZB U trains on Main Spessart Bahn to 55kmh, wait for the 1000Hz light to go out and then speed upto 70kmh.

That's funny, I'm a German train engineer and I never knew any of this. 🤷‍♂️

@MrJimheeren

3 жыл бұрын

Wait you are aloud to drive with safety systems off?

If the PZB system is not speed based why is it set to brake every time I enter a 120? Are you supposed to do 80 in a 120 to avoid stopping? Also how are you supposed to continue after PZB braking without getting failure?

Re: 17:57 Perhaps the British and Australian vigilance systems and North American alerter systems are less annoying, being task-linked (timer can be reset by operating any of the controls) while Sifa apparently is not. I wonder if a task-linked version of Sifa has even been tried in the real world is there is an ergonomic case for it.

Is the powerpoint available for download now?

Will mouse support be added for any console users?

could you do a english signalling tutorial now that SEHS is out.

@atent5124

3 жыл бұрын

It is easy mate....

I acknowledged my very first PZB

May I know the PC ver. key for check the sifa alarm?

What was the route mentioned at 1:08:20?

Look at that, I even discovered tempomat when trying to figure out pzb

Hey! I was trying to drive the train, and when I tried to disable AFB, it didn't work. I did the exact things you did in the video.

@dbclass4075

2 жыл бұрын

To be sure: • Throttle OFF or 0. Not MIN, OFF or 0. • AFB level 0 km/h • Brakes RELEASE • AFB page (press 9) • AFB Aus (press 1)

@GDArnis

2 жыл бұрын

@@dbclass4075 I think I fixed it, although when I turned afb and throttle to 0, the train stopped even I disabled AFB and turned back the throttle.

@dbclass4075

2 жыл бұрын

@@GDArnis By setting the AFB to 0, it essentially commands the train to maintain 0 km/h, and will brake accordingly. Select AFB Aus first, before setting AFB to 0. As soon V-stoll...something is selected, tune AFB up.

When still the Signals dont work right anf also the Speedlimit lines inside the game the PZB dont works right.

@dbclass4075

2 жыл бұрын

LZB or non-LZB sections?

Hello. i'm looking for the key to press for the battery. i don't find this information. Put on the battery is necessary when pantograph is in down position. If someone is having this information. Thank you very much.

@trainsimworld i tried the rolling start of AFB after the ENDE of LZB, but when i press 1 for AFB Aus nothing happens. im doing the snow and ice scenario. what happening here?

@ser_igel

Ай бұрын

when you press AFB Aus nothing should happen because AFB is already off after LZB what you need to do (if you're on ICE3): throttle to 0 AFB to max (so when you enable AFB it won't slam on the brakes) on AFB screen softkey 6 for V-Soll Freigabe (basically free target speed) i believe AFB won't turn on with throttle above idle

PZB Bridging... apparently allows driver to disable/release PZB emergency brake applications in some tunnels, bridges and other unsafe sections. True? I couldn't find much else on it. The many mysteries of German train procedures...

@poopsonlavega

3 жыл бұрын

I think it's the NBÜ NotBremseÜ... it's nothing to do with the PZB. If a passenger or personnal member pull the emergency brake in passengers area, the emergency brake won't apply in some zones like tunnels, bridges etc... NBU inhibates (inhibition) the emergency braking.

@Thorpe

3 жыл бұрын

@@poopsonlavega Yes but what if the PZB pulls the emergency brake in a zone like that?

@emberh4wk

3 жыл бұрын

@@Thorpe then the train driver has a routine/button to let the train ignore the emergency brake and manually when the train will stop in a good place for rescueteams or fire department. I only know DB fernverkehr (ICE/IC/EC/IC2) driving with this system because of the long tunnels.

The German HP-signals are similar to Finnish signals.

Anyone can explain how to recover from pzb if i overspeed or didnt acknowledge?

yes goog

Could you do a uk equivalent tutorial

Great tutorial! It would have been a struggle to understand this from a pdf-file... It would be fun to have a "pro-mode" in the game where all the features that are coded to the trains become meaningful. Like if the train has working destination display, it should be setup at the start of the route and failing to do so would have a point penalty... This would naturally need some in-depth training scenarios.

Did the powerpoint ever release?

Will LZB ever work in Talent 2?

@112Haribo

3 жыл бұрын

The train does not have it in real life. Like Matt said in the stream, they actually modeled it in game, but their Deutsche Bahn expert laughed at them and told them to take it out, since it’s inaccurate.

@AndrazSpan-strojevodja

3 жыл бұрын

@@112Haribo thanks for the answer, I had commented before seing that part. Do you maybe know why does then the train have the LZB switch? Is it a possible upgrade but DB did not choose to buy/install it?

@bl4ckw0lf54

3 жыл бұрын

Andraz Span The LZB system is only a must have for trains, that can go faster than 160 km/h. Otherwise the PZB is good enough to monitore them. In some trains of the DB, the LZB is built into trains that have a max speed of 160, but its not necessary for them at all. Moreover, the LZB costs computing capacity and so on...

@impulsivegamer1737

3 жыл бұрын

@@AndrazSpan-strojevodja you can class lzb and pzb as in cab signalling

@atent5124

3 жыл бұрын

Why is the LZB isolating switch modelled in the cab?

So what is the "befehl 40" for? I dont like the there are more details but they wont be explained... where is the explanation, i hate if i know it will do something diffrent because some details missing :(. Can you make a part 2 ?

@Maxi_420

2 жыл бұрын

The "Befehl 40" button consists of two parts. Once "Befehl" and once from "40". In short, 40 is simply the maximum speed with which the 2000 Hz magnet can be driven. Command (ger.: Befehl) comes from the command form (ger.: Befehlsformular), that is a piece of paper in which various orders can be given, e.g. drive over this red signal. Since you have to press this button when crossing a red signal, this is what it is called.

waiting next for english signals

How do you reset the emergency brake?