Traffic Signal Management and Control System based on density of vehicles and emergency vehicles
Thanks for watching, please do subscribe!!
watch full video carefully
hi every one, this video, will deal with a smart traffic management system utilizing sensor data, communication and automated algorithms is to be developed to keep traffic owing more smoothly. The aim is to optimally control the duration of green or red light for a specific traffic light at an intersection. The traffic signals should not ash the same stretch of green or red all the time, but should depend on the number of cars present. When traffic is heavy in one direction, the green lights should stay on longer; less traffic should mean the red lights should be on for longer time interval. This solution is expected to eliminate inefficiencies at intersections and minimize the cost of commuting and pollution.
Important instructions: 1. keep any object infront of ultrasonic sonir away atleast 20 cm far
2. after swiping rfid card wait for 30 seconds
3. check circuit connections carefully
Components Used
1. Solderless Breadboard
2. Arduino mega 2560
3. Arduino nano
4. HC SR04 Ultrasonic sensor 4 Nos
5. RFID RC522 module
6. RFID Tags 4 Nos
7. Red, Green, Orange, LED 4 Each
8. 220 Ohm Resistors 4Nos
9. Signal light Module PCB
10. 12V DC power supply
11. Connecing wires
OUR Other popular videos
1. How to make pcb board, studio.kzread.infoj142...
2. DC Motor Speed Control using Arduino and L298 with 3 Push buttons
• How To Make a DC Motor...
3. Arduino Robot car with Horn, Front & Back Lights using Arduino UNO
• How To Make Arduino Ro...
4. Automaterd #Car #Parking System Using #Arduino Uno R3
• Completly Explained Au...
5.IOT Based Smart+Automatic Irrigation System with Node MCU(ESP8266)
• IOT Based Smart+Automa...
hrbembedded & craft will make arduino projects and crafts uploads regularly
Subscribe us For More Videos
click for MEGA code :
drive.google.com/file/d/1bPkg...
click for Nano Code : drive.google.com/file/d/1rRoD...
click for circuit : drive.google.com/file/d/14wi5...
subscribe to my channel kzread.info/dron/sxt.html...
Follw on facebook : profile.php?...
Follow on Instagram : / bhadrappahr
Пікірлер: 128
Excellent explanation sir ❤
If i will substitute the ir sensor to ultrasonic that what changes i ll have to do in codes?
what is the code for arduino nano? code_2 only uses the ultrasonic sensors
@sumeetshirsat4450
Жыл бұрын
Did you get the code?
@hrbembedded_craft
Жыл бұрын
its available
@lekhanargowda8474
6 ай бұрын
@@hrbembedded_craftwhere is at sir
@hrbembedded_craft
6 ай бұрын
@@lekhanargowda8474 there is a link in description
sir from where we can get these tiny cars,can u suggest any websites or anything .
@hrbembedded_craft
4 ай бұрын
Fancy stores
Hi I need your help about traffic lights system
Why doesn't it classify the thread by image processing instead we have to swipe the rfid card then it has no effect, it's not automatic anymore
hi sir, can you provide the code for the serial communication between the arduino nano and the arduino mega?
@hrbembedded_craft
8 ай бұрын
thank you for suggestion i will upload new video for this
what if without emergency vehicles? does the code remain the same?
@hrbembedded_craft
25 күн бұрын
no need to remoove nano and RFID
Please share the code please because the one in the discription box is empty
@hrbembedded_craft
8 ай бұрын
Now u can try
@tanvirhayder996
4 ай бұрын
@@hrbembedded_craft1:13
Peace be upon you, Professor. Thank you for your effort. I want to make your project for my graduation certificate, but I want both corresponding signals to work together😢😢
@hrbembedded_craft
7 ай бұрын
I didn't get
@niharvanjari8911
8 күн бұрын
@@hrbembedded_craftsir he wanted to make the same project you displayed in the video for his final year graduation
In place to Arduino mega. We can use ARDUINO nano. Or. Not. ?
@hrbembedded_craft
7 күн бұрын
@@ameerraza6528 no because no of input output are more
The Ultrasonic is not reading I mean it cannot send To LED
Is it possible to develop a project without an Arduino UNO and RFID Rc522?
@hrbembedded_craft
8 ай бұрын
Rfid is used as a switch, of course you can but mega is required to generate time to switch led's
1st view 😁
Sir. Cost of ARDUINO MEGA IS MORE ,,,CAN WE USE ARDUINO UNO in place of mega.....??
@hrbembedded_craft
19 күн бұрын
Mega because of no input output are more
You don't use image processing to determine vehicle density?
@hrbembedded_craft
4 ай бұрын
No,
Osam 💥🤩sir
Is TimerOne hardware needed to be installed before coding?
@hrbembedded_craft
6 ай бұрын
#include timerOne library is included in arduino boards
@yuyuoneesama6162
6 ай бұрын
@@hrbembedded_craftwhat type of RFID cards did you use, the 125kHz or the 13.56MHz?
@hrbembedded_craft
6 ай бұрын
13.56 MHz
@yuyuoneesama6162
6 ай бұрын
@@hrbembedded_craftthe lights are not switching, it only keeps the green light in one module and the rest are red, what should I do?
Is this possible on 8051 microcontroller?
@hrbembedded_craft
Жыл бұрын
Yes of course
@HaidarAlieng
Жыл бұрын
@@hrbembedded_craft ok thanks! ❤
I need a wiring diagram for this project's connection card.
@hrbembedded_craft
5 ай бұрын
Given in description
hello sir I want to buy this project , Do you ship this ???
nice project but lack of mega
Sir which one install the library sir
Why do you use arduino nano although arduino mega have enough pins for RFID module?
@hrbembedded_craft
6 ай бұрын
Mega is works with round robin system, nano is used to give signal
Hii can you upload tutorial of this project
@mntechwithcomedy2238
8 ай бұрын
Sir In codes there are so many mistakes can you correct the code because my project date I tomorrow
@perivemulabindupradhyumna1978
6 ай бұрын
Can I know from Where u got the code
The code is not working sir there's a problem about the LED and the sensor connection is not working and I think the code of the sensor is not connected to LED
@wwgx9690
4 ай бұрын
Did you solve the problem?
@ghostwave1169
Ай бұрын
Ya i too am having the same prblm did urs get resolved
@hrbembedded_craft
Күн бұрын
Please check your ultrasonic sensor supply
RFID not work nhi kar rha hai 30 seconds ka delay bhi nhi lag rha hai
@looyeeket2044
8 ай бұрын
same here
Share code of this project pls
@hrbembedded_craft
5 ай бұрын
Given in description
Sir minimum cost kitna thak pada gayi ge
@hrbembedded_craft
25 күн бұрын
12K
Hi, can i use arduino uno instead of arduino mega?
@hrbembedded_craft
Жыл бұрын
No, this project requires more no of input output than in arduino uno
Good work sir... Can you please share with me the code?
@hrbembedded_craft
Жыл бұрын
Check description
@khaoulabaiteche1124
Жыл бұрын
@@hrbembedded_craft sir please the code with RFID
Arduino program
how much for this project ....i want to buy it for $2000
@hrbembedded_craft
5 ай бұрын
U r fm?
Sir my ultrasonic sensors are not working
@hrbembedded_craft
7 ай бұрын
Check connection and supply
Sir can you please provide code for this project
@hrbembedded_craft
6 ай бұрын
link in discription
What will be the cost of this project if i wanted to make
@hrbembedded_craft
9 ай бұрын
Contact to WhatsUp no
Hiw much wires used?
@hrbembedded_craft
Жыл бұрын
as shown in circuit diagram
Please provide the code in another format. We are unable to open the code
@hrbembedded_craft
8 ай бұрын
Open with arduino ide
Please code share kar do
Hello sir
CAN YOU PLEASE SHARE YOUR CODE SIR THIS IS A GREAT WORK
@hrbembedded_craft
Жыл бұрын
Check description
@AmanPatel-vy3rn
Жыл бұрын
@@hrbembedded_craft there is no code in the description box
Sir I have almost done this project but I have face compelling error
@jibanjyotighadai
8 ай бұрын
What I can do please tell me...?
@hrbembedded_craft
8 ай бұрын
Type of error ?
Source code is empty
sir how to contact you as i cannot contact you through the phone Your phone number is not working
@hrbembedded_craft
2 жыл бұрын
whattsapp 9036828801
@ritiksinghbisht1808
8 ай бұрын
Sir my ultrasonic sensors are not working is the code okay ? @@hrbembedded_craft
@hrbembedded_craft
8 ай бұрын
@@ritiksinghbisht1808 100% it is, remove any object infront of sensor 20cm away, or check connection
Total price to make
@hrbembedded_craft
Жыл бұрын
13k
Please share code
can you please chare code
hi sir i want to do project how i cantact u
@hrbembedded_craft
7 ай бұрын
Check description
Bro im from iraq can i call you plase ?
can i get the whole code please
@hrbembedded_craft
11 ай бұрын
given
Share the code please
@hrbembedded_craft
25 күн бұрын
available in discription
Sir plz send the this project code link sir
@hrbembedded_craft
5 ай бұрын
Given
please reply I already tried to connect with you on fb insta but not got into touch
@hrbembedded_craft
Ай бұрын
Wattsapp no
How to buy all these components sir...
@hrbembedded_craft
8 ай бұрын
May be near Electronics components store or amazon
Can you shared the coad plzz
@battulakarthik1419
2 жыл бұрын
did you get code bro?
hi sir , tum kahoge utna payment send Karu ga ,aap muje iska code de sakte ho ?
@hrbembedded_craft
2 жыл бұрын
Contact me through phone
@mayurchauhan7690
2 жыл бұрын
@@hrbembedded_craft please share your what's up no
@nidhia3809
Жыл бұрын
aap ko code mila kya
@mayurchauhan7690
Жыл бұрын
@@nidhia3809 nahi
Bang butuh flowchart nyaa
How do you Beg other people to help do your OWN project. ??? Do your own thing. Pathetic.
@hrbembedded_craft
4 ай бұрын
Nothing is happening as itself, at least guidelines is required for students
Rfid sensor u have facked
@hrbembedded_craft
Жыл бұрын
No i have given 30 seconds time for each rfid card
@ravindrakumawat5545
Жыл бұрын
@@hrbembedded_craft so a car comes near the sensor. The signal changes for next 30 seconds?
@hrbembedded_craft
Жыл бұрын
This code system works in round robin format Any card you swipe it should complete one cycle
@ugeshwaryvara
9 ай бұрын
@@hrbembedded_crafthow to contact to you?
I want contact you pls 🙏
Thank you, sir. I am a trainee and about to graduate. I will write it in my graduation project. Can you give me your email?
@hrbembedded_craft
7 ай бұрын
whattsup number is available