What an excellent demonstration mate well done ❤

muy completo, gracias por compartir sus conocimientos.

You are the best man!!! glad i found your channel brother!!

nice project brother it is very useful for formars thank you. please make this system with gsm module and arduino brother i am waiting like this project.

Did you solder the jumper wires on the battery holder for the batteries? I don't understand the specific setup for the batteries in the video.

Thx ma broo. keep it up💪

Thanks for updating firstly, could you add notifications mode too and provide code

Very nice video pro

Usefull project. Have one question how can we include a mister or a fan to control the temperature. Raj

hey man, how did you add the components on fritzing? any link or sources?

Bhai... hydrophonic set bana sakte ho keya... with Ph , tds monitoring and balancing system.

Question about your"ESP32 CAM Face Detection Door Lock System" I seam to be having a hard time connecting the esp32 cam to Arduino IDE. Could you assist me with that?

Hi I wonder if you could possibly help me please, I have built a project that uses four 10K pots and an ADS1015 and an ESP32 everything works ok but I am a bit confused as to how I can setup Blynk so as to monitor using WIFI and gauges to work with the ADS1015 and not using the ESP32 pins directly Could you help at all kind regards John

where did you design the circuit

Nice

hi what program did you use to draw at 3:30?

hello may i know what exactly functions of the pir motion for this system?

Thanks bro

nice

Hey, can I switch the Microcontroller from esp to arduino uno?

Sorry I kinda inexperience on coding here. My college just taught me basic level codings and pratical session always prepared component's library so we code easier. So may I ask, does the library actually comes with the component when bought or I have to find its datasheet online? Does the same code work for different brand of component? Like same sensor but comes from different brand.

@imjaniceg-339

11 ай бұрын

So is the problem solved? Can you tell me any alternative solution coz i am facing the same problem

Can you make something similar but using 4 soil moistures and 4 water pumps instead? Please, I don't have any idea how to do it. We need for our research. Thank youuuu

Sir can you make a video on you all ele tronics components and it's work

can we add a fan with temp sensor so that when temp value increases by some threshold the fan will on and can we make fan and motor automatic like they will on automatically and can off automatically based on a threshold value ?

Thank you so much , it is very helpful as the legacy blynk is no more ❤️

@ViralScience

Жыл бұрын

Welcome, yes its no more and It was request by many students for proper tutorial and code with new Blynk IOT app

@salukaranapura6031

Жыл бұрын

Why no more?

@thecreator5524

6 ай бұрын

Hi bro there is a error in the code

Connect relay to 3.3v instead of 5v if the motor doesn't work. This may helps you😊

@behindthescene12934

11 ай бұрын

can i get the code for this project

@akshaytechvlogs4538

11 ай бұрын

​@@behindthescene12934 It is mentioned in the description

@donaldiro5398

10 ай бұрын

the code in the description is giving issues, somehow, I am unable to compile it in arduino IDE it keeps failing@@behindthescene12934

@yathish_here

6 ай бұрын

​@@akshaytechvlogs4538bro I can't find the code in the zip file, can you give a guide for find it

@konu25

6 ай бұрын

@@yathish_here extract and choose ur OS . then you'll find smartPlant Monitoring manual. and that will automatically directly you to arduino IDE (you should have arduino ide for that )

what is the simulator tool you are using

Hello bro , can you please upload the video for this project like how to build the program from top to bottom...

Is it possible to have the pump on timer on blynk?

Please make the video on esp32 cm using new blynk iot

Arcade diagram design app name

Did you code the app or did u use someone's services?

how many solor panel ni requried if we want to make it completely solor and how much watt of panel should we used

can i change the nodemcu esp8266 for an MKR WiFi 1010??? What i have to do if i can?

You are the great sir!🫂

@ViralScience

Жыл бұрын

Welcome Ma’am 😊

Hello, please i don't understand how to go about the code you dropped on this video. What do i do first.

Excuse me, could you tell me what is the name of the component that you put behind the LCD screen?

can we take 220v ac supply instead of battery

Broo can you please make Google Assistant on Raspberry Pi Zero W?

thank you🙂😊

@IoTProgramming

2 ай бұрын

IOT Gateway, AWS IOT Core, and Lambda lectures are now available.

This circuit is implemented in software model and theris is one issue..how water pump is implemented ? Pls tell me

Nice Video Bro 😍 Amazing idea 💡 Now I Am Waiting For ESP 32 Cam contactless Door Lock System Without Be Blynk 2.0 Iot Platform because It Is Not Affordable To Us.waiting For It Bro 😊

@ViralScience

Жыл бұрын

Sure

@gopinathpigeonloft1356

4 ай бұрын

​@@ViralScience bro i have coding issues bro i want Gmail bro

I want to use ESP32 For the project. Are there any changes that should be made for the codebase?

@easyproject2001

3 ай бұрын

you have to download library for esp32 and include in code and remove the library of esp8266

Which application do you use for making circuit diagram

@msaestheticplaysroblox9852

3 ай бұрын

tinkercad will work

Great Project bro. I am working on this project and my question is i just want to use the soil moisture so will it work if i remove the extra code and use 9v battery for this pump.

@ViralScience

Жыл бұрын

Yes it will work

@safooraabdussalam8981

Жыл бұрын

How are you doing the code, could you possibly share the code here

@yathish_here

6 ай бұрын

Bro where to find the code I can't able to find it in the zip file can you pls give a guide?

@tiwari1263

2 ай бұрын

@@ViralScience Hey, Can you please tell me how to import the header files from the zip file to the Arduino file? It keeps giving me error even though all the files are in the same directory?

What software are you using to make the circuit design?

@balaashwath9461

8 ай бұрын

fritzing

Sir plzz do smart traffic management system by using ESP32 arduino

After uploading the code the device is in offline and I tried all methods it's not working please help

Where can we get the hacked for the port? Thank you

How to purchase the materials and components set ?

Sir could you please send the code for notification of rain

Super bro 👍 #TheProjectLab

Nod mcu ordered in ur given link is larger than u mentioned in the video is there any option to fit into the bread board please say i have to submit the project in twodays

@MohsinMohammed-fv9by

2 ай бұрын

Bro iam doing the same project I have to submit it within 2 weeks , how did you complete the project. I need your help .

Instead of wifi connection, is it possible to use data transmission via Bluetooth?

Please upload a video on this "Designing an app for sensing environmental condition by collecting environmental data" this is my project but i can't do this

can you make a beautiful or modern ui with blynk for android device screen?

In what software or site did you make you ‘re design?

@sauraviotdeveloper7094

7 ай бұрын

blynk iot

For the project we will require a dedicated wifi connection?? Or it will work with mobile hotspot

@Bharatiya_Nagrik

8 ай бұрын

Sim module

What's the mAh for the battery? pleases help

Thanks for your project! I try to repeat it, but the temperature, humidity and water sensor does not work. Which DHT library did you use? Why might it not read data from A0? Thank you!

@91.rautyashrameshwar.46

4 ай бұрын

Hey Please send me the code

Can you tell me tge range of it

can u please provide link to buy 18650 7.4v battery

is it work on esp 12f ?

do you have a research paper for this?

i have a question, what does do Pir motion in smart plant monitoring tool?

@Agent-fr1oj

Жыл бұрын

I think it gives you notification that there is someone near the plant. Maybe he just thinks about the possibility that if someone near the plant he/she will destroy it.

Hello Viral Science. Your projects have been educational and impressive! Please, I have tried this IoT plant monitoring system with ESP8266 but the Motor/pump is not turning OFF. The relay remains HIGH always, please, what can I do?

@ccc3420

Жыл бұрын

same

@subhrajitghosh3314

Жыл бұрын

Same problem brother

@CindyM000N

Жыл бұрын

How do you add your library files to Arduino ? Mine verified but error for Esp8266.wifi.h ..

@subhrajitghosh3314

Жыл бұрын

@@CindyM000N update your library then..

@CindyM000N

Жыл бұрын

@@subhrajitghosh3314 bro did u manage to do this project?

Bro can you add light sensor and pH sensor. + Rain detector in this project

What software did you draw the wiring diagram with?

@tonybucket0297

Жыл бұрын

fritzing

@techworld77

7 ай бұрын

Even tinkercad also possible

in arduino ide software which board you select

While connecting the node MCU with mobile my mobile data is not working .So blynk app is not working what can I do?

How can i add the esp8266 to arduino?

Hello sir @Viral Science, I want to ask the is it the coding also can use on esp32 board?

@ModernWorldexplorer1215

4 ай бұрын

Yes, I have done it with esp32 itself.

HEY SIR PLEASE WHILE COMPILING D CODE IT SHOWED ME THAT THE D4 AND D5 AND D7 WAS NOT DECLARED CAN U HELP ME OR SOME ONE ELSE THANK U

Can I get deta on LCD when wifi is not available ?

While compiling no error but it's does not upload it's showing error occurred while skech upload who to clear that. Pls help me out

Super project👍🏼 question: with what kind of program do you make the wiring diagram 🤔❓

@ViralScience

Жыл бұрын

Fritzing

@matthiash.454

Жыл бұрын

@@ViralScience What are you trying to tell me?

@endumurisreekanth7810

Жыл бұрын

​@@matthiash.454which software u used for simulation of project

@shreemathecommunications3333

8 ай бұрын

​@@matthiash.454name of the software he used for design

@MrNams

8 ай бұрын

I have multiple analog sensors but ESP8266 have only one ADC, how to use multiple sensors with ESP8266 @@ViralScience

Bro pls give a link for display

crystal library error whats the problem with that???

Brother, can u help me to setup blynk... It's showed me Couldn't connect server!

I am getting error in your digital hourglass project:- Return code not zero

Hello. What app or website do you use in making the virtual wiring of you project?

@macabinguiljoshuar.2328

Жыл бұрын

tinkercad

@akshaytechvlogs4538

11 ай бұрын

Blynk

Sir the code on the website it shows error in ide application while dumping the code to esp8266

*Hola,me gustaria que presentaras un ejercicio con ESP8266 trabajando en comunicacion Bidireccional,para encender y apagar leds con botones pulsadores ,a modo de servidor y 2 o 3 clientes......*

Brother i have been facing blynk app problem... Wifi is connected but blynk show after upload thw programme 'wasn't online online'

I have 1.5 hp submersible motor which i have No and Nc switch i want to make this two way , with wifi, Bluetooth and switch can you make it please!

Bro can i use node mcu esp8266 cp2102

but why not temperature sensor or humidity sensor was working properly?

Bro make this same project with the newly updated blynk iot in 18.9.2023

How to generate authorised code in mobile application

Super project , can you give me a code . i don't fond it thx

can you check your code and Circuit Diagrams link....it can't be reached

Can anyone tell me how to add a rain detection sensor to this project with code

I have a problem. When I turn on the motor, DHT sensor doesn't work

Nice bro can I buy it

Hii this code giving error that is please specify blynk template id i have given the template id but this is still showing error plz help ne

I getting error in the code The error is c:\Users\shard\OneDrive\Documents\Arduino\libraries\LiquidCrystal_I2C-master\LiquidCrystal_I2C.cpp:244:1: error: no return statement in function returning non-void [-Werror=return-type] 244 | } | ^ cc1plus.exe: some warnings being treated as errors exit status 1 how I can resolve this?

how can i get the code of the project plz say

I want to buy this

How to write program.detail step by step procedure about this project code.like the Arduino ide install to upload the code in esp8266

From how many metres can the iot work