Quality American manufacturing and Fabrication, clean organized shop, cool dudes full of knowledge, thank you for letting us witness awesome craftsmanship.

@cidadaodorense3231

4 жыл бұрын

Super clean and organized shop indeed!

@jeremyrose7541

4 жыл бұрын

Yeah!! Really Set up..

@bleachinuri

3 жыл бұрын

And their not union

"Got a lot of stuff crammed in a lot of corner" This is literally one of the cleanest shops I've seen. Kudo's guys, great work, excellent knowledge, and a super clean shop. Wouldn't hesitate at all to send you guys work.

I had them build 2 driveshafts for me a couple years ago and they had them done in 24 hours. Nice guys!

@MrMrsregor

4 жыл бұрын

About what is the cost for a Jeep shaft from these guys ?

Too cool! I hope you showing these guys work their magic gets them tons of business. They seem like such humble guys

A great example of what is referred to as skill. Techniques and knowledge that is gained over time of being committed to creating the best results possible. No guessing on what to do, what he does gives him the results he is looking for. Simple but very effective tools and the skill to use is the way it has been done to give us what we have. Great video Mr. Rose.

@jeremyrose7541

4 жыл бұрын

👍👍👍

I drive past that place on a regular basis. Had no idea that mere mortals could go in there! Groovy vid bro!

Damn Steve the shaft master

Knoxville driveline built a front shaft for me a few years ago. Good guys, quick and fairly priced.

Jeremy, you make a great addition to BleepinJeep. You are fun to watch and the way you were cracking jokes at Matt when he rolled the scorpion was hilarious. Would love to see you on KZread more!

@jeremyrose7541

4 жыл бұрын

🤗😊❤

great video! super awesome to see people put that much pride into the mastery of their craft.

@jeremyrose7541

4 жыл бұрын

👍👍👍

i love watching machining videos. it's my ASMR

Hello there all the way from Malaysia .... Thank You for the Awesome Video 👍 hope do order from them in the future

This is one of my favorite videos from Bleepinjeep. Wow, didn't realize what it took to make my drive shaft. I feel so much better about the money I spent. Thanks a bunch.

Really nice shop with some dedicated skilled craftsmen.

Very interesting. Thanks for posting.

Beautiful work, top notch equipment and tolerances! I don’t think I could set foot in a place like that without cracking a joke about “shafts".

@jeremyrose7541

4 жыл бұрын

RIGHT!! HAHA

That was very interesting. I've wondered about the process to building a shaft. My rear shaft didn't come from Knoxville Driveline but it did come from one of the shops he mentioned. I think I'll source these guys for my front shaft. Closer to home.

@jeremyrose7541

4 жыл бұрын

👍👍👍

That’s some quality craftsmanship right there.

@jeremyrose7541

4 жыл бұрын

It was nice seeing this.. I was impressed also..

I've watched this twice. Super interesting and educational. Thank you!

@bleepinjeep

Жыл бұрын

Glad it was helpful!

I build driveshafts here in northern Michigan. Everything from race cars and mud trucks to heavy duty over the road semis and race semis

It is amazing that people pick up on "Clean" as I do. I need a new front driveshaft double cardan for a 2004 Jeep Grand Cherokee WJ. I swapped out a universal with a hammer and socket in an emergency. I bought a press after that. Local Milwaukee shop tried balancing it 3 times but it still buzzes at 70 mph. Taking the shaft off and just use the rear they made the Jeep is smooth at any speed.

Wow. Awesome video jeremy. These guys are unbeliveably great at their profession ive been in a few shaft shops and never seen this type of quality craftsmanship

@jeremyrose7541

4 жыл бұрын

It was Top Notch!!

Jeremy is a boss ✌🏽

Our younger generation need to learn from these men. These are arts that need to be passed along to the future of our hobbies !!! This was like watching a fine craftsman blow glass. AMAZING !! I assemble bikes and it was similar to trueing a wheel, but you need to know were to focus your efforts. Spot On!!!

Awesome watching people that really know their stuff demonstrate their craft. Great work fellas.

Good video enjoyed watching the process thanks

Great information, thanks for taking the time to show us how it is done !

Brilliant disclaimer statement! I dig it!

"You gotta a sticker we can put on that thing?" "NO!"

@NoWr2Run

4 жыл бұрын

LMAO, I LOVE THIS GUY & HIS JEEP.

@jeremyrose7541

4 жыл бұрын

HAHA!!! GOTS TO JOKE AROUND!!

@Fix_It_Again_Tony

4 жыл бұрын

@@jeremyrose7541 That's why we love you, man!

Awesome video Jeremy. Loved seeing all those shafts! ❤️🐞. Bigger is better! 🤪

Nice thank you

WOW, who knew and now we do. Thanks Jeremy for bringing us on a educational journey, this is the kind of practical useful stuff they should teach in school. I would rather know how to build a driveshaft than properly form a sentence or spell for that mater but hey I'm just a northern Michigan hillbilly.

@jeremyrose7541

4 жыл бұрын

🤣👍🙌👍

Outstanding service 🙌

Nice job....and some really awesome looking MIG welds on that shaft assembly...Thanks for the video

Great content! Keep these kinds of videos coming! Jeremy is 👍👍. Learned a lot.

@jeremyrose7541

4 жыл бұрын

😊😄👍👍👍

Nice clean shop

Incredible welds!!! Made in USA quality! I live in middle TN and will have them build my Gladiator drive shafts when the time comes. Great video! Thanks! 👍🇺🇲💯💪

Very interesting content, thank you so much for producing and sharing.

Think I need something like this. Bought a few shafts from tom wood's thinking they were something special based on what I had read. bent the last one the first trip out. If you're gonna play in the rocks, .120 wall is no good. Definitely go 1/4" wall. Don't listen to them if they tell you otherwise

@jeremyrose7541

4 жыл бұрын

This can happen with any driveline shop Tom Woods makes quality stuff no doubt. But you also have to make sure you let them know what you're using it for!!

Jeremy we're have you been my whole life please more videos bro

@jeremyrose7541

4 жыл бұрын

😂🤣😂👍🙌🙌

@bsideadventures2180

4 жыл бұрын

@@jeremyrose7541 Thanks my dude. When you gonna do a trail ride?

Great shop!

Great video!!! Will be concidering these guys when I need my shafts built.

Much more goes into that than I thought.

Thanks for the video Jeremy, I now know why driveshafts are so expensive, lot of knowledge and experience put into them.

@Tylerknoxville3

2 жыл бұрын

Like the saying goes, all did was tap it with a hammer but you're paying for his 40yrs of knowledge of where to tap.

Awesome video!

thats some impressive equipment! nice to see how a "pro" would do it. 2 jack stands and the digi angle finder works for me, nothing balanced no vibration, squareshaft on the front too, with hub flanges so it always spinning.

@jeremyrose7541

4 жыл бұрын

What did you say I couldn't read your comment for all the vibrations LOL I'm just kidding that's what we have done for years my friend there's no knocking it. But I will to say it changed my Jeep the way it drove when I put the new shafts undermine. So much quieter I didn't even realize.

Awesome video. Great information.

Damn beautiful weld. Great guys great shop

Great video Jeremy! Very talented guys there!

@jeremyrose7541

4 жыл бұрын

Yep..

Wow, that's seriously impressive. I know where I'm going to be buying my driveshafts from.

@SarahSmith-hd8kd

4 жыл бұрын

Adam's driveshaft or Northwest Drivelins. Lol just kidding those are two of the best in the nation both in my backyard Washington. Sorry I couldn't resist but Knoxville did great.

Awesome video jeremy! Such a cool process

@jeremyrose7541

4 жыл бұрын

Yes it was!!😊

Thanks Jerome,that was awesome.

@jeremyrose7541

4 жыл бұрын

😊😊😊👍👍

Very cool! Learned a few things. Thank you Jeremy

@jeremyrose7541

4 жыл бұрын

Yeah I was happy I got to learn a few thing also!!

Greetings from Peru always following your videos that are very spectacular..

@jeremyrose7541

4 жыл бұрын

Thanks bud!! Really cool that you fallow along with us!!👍👍

Fantastic Presentation guys!! You-all need to clone Steve!! He is a real Master of his craft...

@jeremyrose7541

4 жыл бұрын

Lol 😆

Adam your the man that`s one nice shop you have .

Great stuff as always Jeremy👍

@jeremyrose7541

4 жыл бұрын

Thank You Sir..

That was great

That is one sexy bear right there! Oh Misssa Jeremy! Good stuff guys!

@jeremyrose7541

4 жыл бұрын

Haha!! Man we all need to get together soon..

That was a great video thank you

Great guys

Great learning video

@jeremyrose7541

4 жыл бұрын

Thanks👍

Good lord those are some pretty welds sir! And I thought I had my on days when I'm doing fab work, the goes my ego lol.

Great video, very interesting!!!!

@jeremyrose7541

4 жыл бұрын

Thx!

That was awesome!!! I’m in the market and they seem like they do an outstanding job. Bigger is better...that’s what she said lol!!!

@jeremyrose7541

4 жыл бұрын

😜😂🤣😝

Cool vid man. Pretty funny also.

"Shaft Master"...😏

@charliemelidosian8726

3 жыл бұрын

Master shafter

very cool

Jeremy, " NOBODY MAKES A VIDEO LIKE YOU BROTHER, NOBODY ". I LOVE YOUR JEEP TOO, THAT THING WILL DAMN NEAR GO ANY WHERE.

@jeremyrose7541

4 жыл бұрын

Well Thank You Buddy!! But my Jeep is a pig lolol

@NoWr2Run

4 жыл бұрын

@@jeremyrose7541 Aren't they all ? But I love my PIGGY,LOL.

Good guys got a shaft for S10.

Lol shaft master lol poor guy great video

@NoWr2Run

4 жыл бұрын

IT MIGHT WORK WITH THE LADIES ?

@jeremyrose7541

4 жыл бұрын

Haha!!😂😄🤣

Of the options listed on the website, which one is this one represent (trail rider, mud slinger, hammer head fred, and the terry)?

They replaced the double cardan centering ball on a TJ drive shaft for me. Good guys.

Can matt please do a video of how to set pinion angles and dribeshaft up correctly

I want to do buisness with these guys now 👍

Knoxville guy reminds me of Tony Stewart.

That is great American craftsmanship. Obvious they take pride in their work. 🇺🇸🇺🇸. I would suspect their orders will go up now that they have been Bleeped.

@jeremyrose7541

4 жыл бұрын

Bleeped lolol

I'm liking what I'm seeing. Do they ship driveshafts?

@jeremyrose7541

4 жыл бұрын

Jep!! Sure do!!

@SarahSmith-hd8kd

4 жыл бұрын

Lol do they ship🤣 I suppose it's a legitimate question though not everyone might do that just the ones who are the best and like money.

How did you find Chip Foose in a driveshaft shop?

This is cool I live in South jersey and there is very few shops I can go to that make driveshafts in house .....sad state of affairs.

I only use grease able stuff because I do want my stuff to last and run at it's best. 4 times a year my vehicle get's the grease. Even my race car same way.

@rockjeep_tj9692

2 жыл бұрын

A good non-greasable Spicer ujoints last just as long and are considerably stronger than greasable joints

@lsellclumanetsolarenergyll5071

2 жыл бұрын

@@rockjeep_tj9692 only if your forget to grease it proper :-) LOL

I didn’t know Chip Foose made drive shafts!

@jeremyrose7541

4 жыл бұрын

HAHA!!

Spicer Life Series or nothing, not sure why you let them put those Neapco joints in there.... That balance job was super neat to see though!

@jeremyrose7541

4 жыл бұрын

I love Spicer but the Neapco is not bad

You said go big or go home. It's more like go big or don't get home. Lol

Are y’all in Knoxville

Does the water weaken the weld, cooling it fast like that

@janeblogs324

3 жыл бұрын

Yes indeady, it creates a crystalized structure in the weld. You slow cool iron to prevent stress. You rapid cool high carbon steel to harden

Stupid question time here. At what point do you build the drive shaft so strong that you break a more expensive harder to replace part? I am not trying to be silly, stupid or anything else. My Jeep YJ is not a mall crawler or a rock crawler. I would rather to replace a drive shaft on the trail over the T-Case. Same can be said for the straps on the driveshaft shaft. The more you strengthen one point, the more another point becomes the breakage point.

@bleepinjeep

3 жыл бұрын

That’s why you build everything strong! 😀👌

@TheLittlered1961

3 жыл бұрын

@@bleepinjeep I agree that building everything strong is important. The fun part is balancing budgeting, weight and having a proper weak point. I remember 4 Wheeler magazine discussing this very issue.

Adam looks like Chip Foose

@jeremyrose7541

4 жыл бұрын

Hahaha!!

Im in vegas, who is the driveline shop yall were talking about out this way??

@jeremyrose7541

3 жыл бұрын

Adams I believe

@jamesvandyke5874

3 жыл бұрын

😅🤣 wow. That blew over my head . Thanks a bunch

How much would that shaft cost? I need 2 shafts and would like that level of workmanship.

@jeremyrose7541

4 жыл бұрын

Give them a call..

Driveshaft should be made of titanium, the material cost is really not that high today .

I don't usually grease ujoints. To much of a pain so I prefer non-greaseable.

@jeremyrose7541

4 жыл бұрын

Yes yes So Much Better!!

😎

Estwing. No Eastwing. Lol

Hollow spindle.

So… Do you want to make me some CV axles and a driveshaft for my 99 Toyota RAV4 awd four-door Five speed manual? I am swapping in a motor and will make close to 400 wheel horsepower! So if I can get 500 or 600 hp rated axles/drive shaft! that would be sweet!

@jeremyrose7541

4 жыл бұрын

I'm sure he can help you out with the drive shaft just give them a call! But I would recommend RCV axle shafts for the front

@welcome2myworld1.o89

4 жыл бұрын

@@jeremyrose7541 awesome I'll look them up. I told $2,000 with it. And I'm going to be doing a lot of off-roading and exploring and over landing. So I need something reliable, and overbuilt.

I really don't care much for Murphy, but that SoB keeps on messing with me. I would buy the strongest I could afford, and I sure would spend money on things like this before putting on fancy rims or engine modifications.

I feel like these guy are challenging me I can break some stuff

👍😎👍

Rad