5:40 that belt dance as it runs away is spectacular!

@OmegaStarwatcher

Жыл бұрын

Belt said "F**k this I'm out!"

@BuckFudweiser

Жыл бұрын

That was awesome 😂

@silasmcgee3647

Жыл бұрын

I love physics 😂

5:40 blower belt said ✌🏼

@X3Andy

Жыл бұрын

If you look close, it looks like the crank pulley broke to me.

spend tens of thousands building a puller and $10 on the front wheels😅

@jje8182

Жыл бұрын

Lol, I noticed that. 🤣

@PullPot-eq4gv

Жыл бұрын

Always good for a laugh.

@travisdean8794

10 ай бұрын

What’s yours have on it?

@c-peezy5148

10 ай бұрын

$15 at harbor freight 😂

@HYLO_1

Ай бұрын

Fr

Thanks for putting the best one at the beginning where the motor went flying

I shouldn’t be so entertained by watching thousands of dollars and hundreds of man hours literally go up in smoke. But alas, here I am!

Folks: “Hey let’s go watch a sport that is literally tractors pulling stuff until they break.” Also Folks: “OMG IT BROKE!”

Man that one at 10:30 must have been powered by the souls of the damned. Never heard an engine wail like that when coming apart.

@OnlyGhostType

Жыл бұрын

Lol the wicked whitetail Probably a demon or two

@jr28778

Жыл бұрын

Sounded like it was just doing its mating call. Its called the wicked whitetail after all 😅

@billmedvec5514

11 ай бұрын

Charge pipe came off. Make loud whirring sound. Engine didnt die.

@feelincrispy7053

7 ай бұрын

@@billmedvec5514I’d say exhaust dump broke/melted off. Remember there is extreme egt’s and also back pressure in there. Blowing a hole/crack just like an oxy torch. The reason I say this is because you don’t get that kind of soot out of the charge pipes coming off

I loved when the announcer said he builds engines for a lot of people. Then he blew a rod out of his engine😂😂😂.

You know these V8 powered lawn tractors really oughta upgrade their front ends. Them control arms come apart like they're stock Craftsman lawnmower parts!

@darksu6947

Жыл бұрын

Half of them wouldn't blow up the way they do if they'd let of the throttle when they quit moving forward.

Tks by showing the distance as well. A few guys can learn from you😀 from South Africa

Lol those little bitty wheels.

I realize the drivers have helmets, but I notice none of the roll cages have foam padding. I'd think the "bell ringing" could be less violent if there was some softness on the cage itself.

On 07:25, perfect light, perfect camera angle, way above tractor pulling. Just.. perfect footage. Probably unwanted, amateur maybe, but very very beautiful, just some good luck anyhow... Incomprehensible by most, pure art 👏

Talk about driving it till the wheels fall off. 😂

Talk about serious TORQUE!!! 🚜🔥

Ouch that one at 5:40 mark looks like he busted the snout on the crank that sucker moved back and for a whole bunch

@X3Andy

Жыл бұрын

Glad I ain't the only one who seen that.

I enjoy watching, but this hobby obviously takes a lot of money, time, and skill. Those rigs cost a fortune and there's the equipment needed to carry them around. it takes a lot of time to build, maintain, and haul them. They always break at some point costing even more money and time.

@JPPullingProductions

Жыл бұрын

They are sometimes pushed to and past their limit.

@dmitri546

Жыл бұрын

If I remember correctly, one of the rules is that the engine's block has to be stock, so it's gonna break eventually

@Harry_Ballzonya

Жыл бұрын

They also require balls. 😂

@mikescott227

Жыл бұрын

@@dmitri546 don’t sound stock to me

@adventureswithgrandpa3858

Жыл бұрын

Hot rods of any type are strictly a rich mańs hobby.

The thing I noticed is the mishaps happen when the tractor starts bucking like a wild bull. When it starts doing that you need to get off the throttle

@joeyramnarine214

Жыл бұрын

Not always

@mikeymcmikeface5599

Жыл бұрын

I'm sure the professionals doing this will appreciate your advice.

@macfletcherhotmail

Жыл бұрын

That would be ok if you could have another go at a pull but because you have limited pulls 3 I think but Im sure I'm wrong, it could be more could be less either way you make every pull count

@timmebruer5205

Жыл бұрын

@@macfletcherhotmail you're limited to one hook

Looks like some VERY exspensive days for these boyz..... but dam fun, unless your paying for it of course....

5:00 in had to be my favorite

The tiny front wheels bending is hilarious

I wonder if the failed runs wouldn't occur so frequently or dramatically if the front axles on certain machines (e.g., 3:33) weren't so comically undersized relative to the weight they have to bear.

@videomailYT

Жыл бұрын

That's not the only point, if they would use something like a shock absorber the frontwheels won't break apart from the frame...

@NBSV1

Жыл бұрын

Sometimes there’s rules that limit what you can’t do. Generally the idea is that you want to save the weight on the front so you have more weight you can move around to get the right balance for the track. If you did big wheels and heavy suspension that’s a hundred or so pounds you can’t move around.

@sideburns2009

Жыл бұрын

Every single one with the tiny little shopping cart wheels on the front does the exact same thing. Bounces. Breaks a wheel off and drags to a stop in the mud. I’m watching this wondering why they even build those. They seem inherently flawed lol

@FokkeWulfe

8 ай бұрын

According to several people (granted in KZread comments) its not super common. This is a fails compilation. Theres 1000 we don't see, where they worked perfectly.

"Bang-up" vids!!! 👌👌😎😎👍👍

Anymore else notice when the weight box slams the front of the drag sled that's when a bunch of these blow a drive shaft?

Looks to me like the little lawn tractor division have front tire break off problems 9/10. Doesn’t seem worth it to put a decked out big block on those things

@JPPullingProductions

Жыл бұрын

They rarely have problems. Remember this is a mishaps video. We probably tape over 1000 to 1500 passes a year (maybe more) and these are the only mishaps.

@intercoastalinterceptor

9 ай бұрын

They are the billy baloney of the pull class .. like a red headed step child

Those mini rods are like trying to steer a bottle rocket!

5:39 That's a new one.

It must be heart breaking for the team and owner when these machines go bang....

Wow was surprised to see a Walsh Bros tractor. I thought they got out of pulling completely after the mishap at Fort Recovery,Ohio

@JPPullingProductions

Жыл бұрын

They have been back out pulling the last few years. At first the had 2 turbines Mods. In 2023, they ran the "4 Aces" turbine mod and "Irish Challenger 2.0" as seen in this video.

Black international was beautiful even hanging from the forks.

Good Post. Thank you.

Man muss sich echt fragen, worum die keine Pulverlöscher benutzen...

Love how it’s all 2nd gens.. 😂👍Still gonna rep my 96

В чем смысл соревнования и что за технику они таскают на прицепе?

With every run you learn something. The one who learns the most wins.

Cool video but I noticed any tractor with little tires in front just get toasted.

@JPPullingProductions

Жыл бұрын

Keep in mind this is a mishaps only video from a whole season of passes. We probably tapped well over 1000 passes last season.

lol i grew up close to bowling green where the nationals used to be. those commercials every year where classic

sweet video!

Used to love mini mods. But they can’t handle the horsepower now.

Some one needs to call a repairman

Small ones bounce and break the front axles. Springs not allowed?

You always want a straight level pull on the engine. When they start bucking up and down the fuel pedel, its not going to end well.

I can't believe nobody saw the ghost 👻 at 9:03 lmao

13:20 Geez, that's a MONSTER sized big block... 😳

@jakem5689

10 ай бұрын

I was thinking the same thing!

They should run diesel in the tractors like they use too instead of alcohol and lower the rpm and they wouldn’t go kablooey

@hobbslee2336

Жыл бұрын

I pulled up for the kablooey man 😂

@NBSV1

Жыл бұрын

You want horsepower and rpm for the speed. They’re already carrying the front end so can’t put any more torque to the ground and once the sled tops out it’s gonna stop. So, gotta get it moving as fast as possible while you can.

@charlieh3335

Жыл бұрын

A lot of these are diesel

I always thought someday I might build a superstock tractor. I think I'll just stick with pulling the 185 allis and the 4440 jd at the local county fairs. It's alot cheaper!😅

Holy tomatoes. Well honey I beat the last guy.

Не там они тягаются,ой не там! В чистом поле,на заре,с плугом и пахать! И польза и проверка прочности сие чудо техники!!!

@5:40 legend has it that timing belt is still going

@92Jdmsupra

Жыл бұрын

That's the supercharger belt.

@fellowship_of_the_goat

Жыл бұрын

It's the blower belt, timing chain is small and behind covers on them

@petert3355

Жыл бұрын

Don't matter what belt it was, it still said. "That is it!!! I'm outter here..."

@michaelpopowich5095

8 ай бұрын

Or went like Cartman from South Park: "Screw you guys, I am going home!"

5:39 supercharger belt jumps off and runs away on the ground because of centrifugal force lol

For those who don't know, or are new to this channel, tractors aren't made for speed.

@JPPullingProductions

10 ай бұрын

These are just the few mishaps that happen over an entire pulling season.

@3:10 "Is that a John Deere!?" No dude. Thats a John Moose.

Third one lost a tire but still had some in him!!!

I do kinda wonder why they don't put more engineering into the front wheels. You've got like a 60 inch wheel on the back and probably like a dozen lugs for them and at the front, half of these things have the front wheels from a garbage bin mounted by like a spigot shaft.

Sorry I’m new to this .does the tractor pull the opposite way? (Or whatever is getting pulled)

@assymcgee2835

Жыл бұрын

The pulling sled increases weight the further it's pulled

@mikeymcmikeface5599

Жыл бұрын

The sled opposes the pull.

@DaveW74TVN

Жыл бұрын

The trailer being pulled acts as a brake. The guy in the cab controls how fast the the weight moves forward and increases the pressure against the skids/brake on the bottom of the trailer. KZread *smarter every day tractor pull* there's a great breakdown of how it works.

@JPPullingProductions

Жыл бұрын

Here is some info on the puling sled (weight transfer machine). kzread.info/dash/bejne/fG2H3Lupl7SwpNI.html

with the small one (single superchage v8) ca 90% of the times it's the front wheels that goes bye bye, you can say what you want, the big ones has a huge wariation of problems so betwin an engine fire and the front wheels braking i woill happyli take the later but steal i would have thought the have conected the dods and re-inforced those wheels

“I’m johnny in the spot!”

Can anyone tell me what the gas/liquid is that is being expelled from underneath the tractor/truck?

@michaelpopowich5095

8 ай бұрын

Usually oil or very rarely brake fluid or even fuel

i wanna know where they keep getting all of these big block Blower Motors asking for a friend...

The lady at 2:45 looked like she cant even remember what year it is. She got done up James Bond style.

I dont understand thiss. Why are the engines blowing up? Is the truck being pulled has brakes on or is it just really heavy?

@jacobraleigh2842

Жыл бұрын

The sled is very heavy as it goes down the track. To get momentum you need speed to get speed u need power ...LOTS OF IT

Attending my first event this weekend, do these blow ups happen pretty often?

@JPPullingProductions

10 ай бұрын

We usually tape 40-60 sessions of pulling a year and these mishaps are from an entire season of events.

Has anyone else though what is would be like if one or these were brought to a drag strip?

@bassplayer2011ify

Жыл бұрын

They would probably do a decent standing quarter. Most of these would probably fall into the gasser category.

Awesome 🔥🔥

@JPPullingProductions

Жыл бұрын

Thanks!

“Now me and the and scientist gotta rip apart the block, and replace the piston rings you fried”

these trucks should come with an onboard fire suppression system. couldnt b that hard to put in.

You’d think that eventually they’ll figure out that those dinky little front wheels that look like they came off a lawn mower are just not gonna cut the mustard. 😔

@JPPullingProductions

Жыл бұрын

Typically there isn't any issues with the "dink little front wheels". These are just the mishaps from a whole season. I have seen probably just has many bigger tractor tires have issues as much as the little ones.

@charlieh3335

Жыл бұрын

Youd think that these professionals whove been doing it for decades would stop and ask you, a random person on youtube with zero knowledge, how to build their machines

1:51 Man like; THIS YOURS 😅

05:38 Belt: _I go VRRRRRRRR_

First time I've watched this. I have never seen anything more American and I love it

I wonder what happens to the clutch plate😅

Are they supposed to blow up?

@JPPullingProductions

Жыл бұрын

These are mishaps from a whole season of filming. We probably tape between 1,000 and 1,500 passes a year, (maybe more). So blow ups don't happen every time.

Tractor Puller to insurance agent, "what do you mean that's not covered"?

I wouldn't be surprised if those big wheel ones give people concussions even with the helmets on. That looks rediculously painful to get tossed around in. Needs some kind of special 3d hans device.

I don't understand the little dragster with the little wheels on the front. What the heck!?????

"Ouch..."

Ещё бы спереди колеса от самоката поставили)

As soon as they willie sh1t goes south lol

0:19 emagine me in my nissan skyline r34 doing a speed pull on the freeway

20k on the engine. 5$ on the front wheel.

first thing to break on these small front tire units why use

Well that Chevy Silverado has no business being there it's a Mopar and John Deere tractor pulling the world

those quadruple engine trucks confuse me, how the hell do you get power from all 4 equally without ripping everything apart?

@michaelpopowich5095

8 ай бұрын

Usually very time intensive and tricky calibration

Never understood why some of these giant tractors have wimpy lawn mower wheels on the front.

5:43 my people need me.

@MaydupNem

11 ай бұрын

Poochie died on the way back to his home planet.

So the tiny wheels are supposed to hold 4 engines?

@JPPullingProductions

10 ай бұрын

Most of the time there are no issues even when they get a little wild.

When you all try to continue to go after the rig comes to a complete stop, is why the trucks blow up

Not certain I get the point of the tiny front wheels. They are always broke, and not just in situations like these. Constantly the failure point in otherwise normal pulls.

🤔кто нибудь вообще доехал то до финиша? Или все "крякнул"😊?

The other one, though was the next ghost rider

It must cost a lot of money to repair or replace the engines

👍👍👍👍

Just curious, but can anyone translate all of these mechanical failures into real dollars for repairs??

Danger To Manifold

Пацанов, на Камазах с Дакара туда надо, они бы показали как надо😅

them are awesome, fire breathing machines that could drag the Devil back to Hell

Никогда не понимал смысла в этом шоу🤔

These things have pressure washers for fuel pumps💀💀💀

All the money invested in those rigs and they can't find it within their budget to beef up those front ends? Seems like many would have had it if the front end would hold up.

Not surprising because the way they tune these, they will eventually blow up.