Great and Lovely work mate 👏 I also built my own one few weeks ago but differently

Awesome 2 see u guys fab together!

Bad ass work 🤙🏻

This is bad ass work

Exelente video

De lujo

Is that the Model 3 or 32 bender? Using the scanner for the cardboard templates is fantastic idea. I don't think I've seen that before.

@TTMotorsports

4 жыл бұрын

This is a very old model 3 bender. Works great and have used it for many years. I've also used model 32 and always say to get whatever bender friends have around you so you can borrow dies.

@Fix_It_Again_Tony

4 жыл бұрын

@@TTMotorsports What is the max wall thickness you've bent with it? I was going to go with the 32 with a ram because I want to be able to bend 0.250 wall tube.

@TTMotorsports

4 жыл бұрын

@@Fix_It_Again_Tony I haave bent 2" x .250 with this bender and even 1.5 x .375 wall before But If i were buying new the model 32 is what i would go with, a couple of my holes were getting ovaled out so i got a couple new arms.

@Fix_It_Again_Tony

4 жыл бұрын

@@TTMotorsports Thanks for the feedback.

Now thats how you build 💪

@TTMotorsports

3 жыл бұрын

Thanks. Always treat customers trucks like I would my own

Hey probably a dumb ass question but if I paid you guys could you prebend and pre cut me one to weld up for my tundra? I love the look of that bumper

@TTMotorsports

3 жыл бұрын

I could but most towns have someone with a bender that could bend them no problem

Great job guys! Got inspired to do that on my sequoia. Can you please be more specific on the materials? How much do I buy on every tube? Thanks

@TTMotorsports

3 жыл бұрын

The best way to figure out the tubing is to get out a tape measure and measure it out and if you measure 30ft they are sold in 20ft sticks so buy 2 sticks incase you make a mistake. I used 1.75"x.120 DOM tube and1.5"x.120 tube for diagonal gussets to the side of the frame. Thanks

@TTMotorsports

3 жыл бұрын

I've been shopping for a first gen 4x4 sequoia to build for myself but hard to find for reasonable price and with under 200k miles.

@dadozey7619

2 жыл бұрын

@@TTMotorsports what size and material is the sheet of metal

@TTMotorsports

2 жыл бұрын

@@dadozey7619 The bumper end caps was 3/16" P&O Steel Sheet

Stupid question for ya brotha but I have a fgt too and I wanted to know once you removed the stock bumper where did you reroute the rubber lines that were mounted to it

@TTMotorsports

Жыл бұрын

This truck had bumper already removed. So I'm guessing he zip tied them to the frame or core support.

No hay lugar para ir a trabajar en su taller y aprender

Hello Sir, would you be able to share an example or blueprint for a 2013 Silverado bot on prerunner style bumper?

@TTMotorsports

Жыл бұрын

I do not have one and I have never made one for that truck. I don't make blueprint for these bumpers. I fit and build them to the vehicle, not a production item, they are one off for each truck.

What size and wall thickness of tubing did you use???

@TTMotorsports

4 жыл бұрын

This was 1.75" x .120 wall dom tubing

What size tube are y'all using to make y'all's bumpers

@TTMotorsports

2 жыл бұрын

This is 1.75" x.120 dom tubing. Usually run that or 2" tube for full size trucks.

What are you using to convert the scans to your CAD program?

@TTMotorsports

4 жыл бұрын

I'm using the plasmacam program it comes with. Design edge is the new software. It converts black and white bmp scans into lines that we clean up in their software. Works great.

@dymonddable

4 жыл бұрын

@@TTMotorsports That is so cool.

Where are you located and how much does something like this run??

@TTMotorsports

4 жыл бұрын

We are in phoenix and powdercoated runs around 800 roughly.

What size tube did you use ?

@TTMotorsports

3 жыл бұрын

this one is 1.75" x .120 DOM tubing

I’m near Santa Maria California, can you guys build me one ?

@TTMotorsports

Жыл бұрын

I would when i lived there in 2022 BUT i have moved and am in Lucerne Valley, CA I can build a similar bumper for you but would cost $2200

Are these type of bumpers never painted ??

@TTMotorsports

3 жыл бұрын

They are painted most of the time including this one after the video was done. Unless racing than the trucks aren't painted so you can check for cracks easier

How much did all the materials cost ?

@TTMotorsports

4 жыл бұрын

Depends on the price of tubing per ft. I would say around 100 or 120

I need one built and shipped to San diego. Please lmk

@TTMotorsports

3 жыл бұрын

I'm in Santa Maria, CA and can build one for you but you would have to come and have me build it on your truck. I know of lots of shops in LA and San Diego who could build one for you too.

@Ask_the_neighbor

3 жыл бұрын

@@TTMotorsports right on ! Yeah lmk . Much appreciate it if you could drop me a referral in san diego

@TTMotorsports

3 жыл бұрын

@@Ask_the_neighbor Corrosive Design in Ramona does good work and could even refer you to someone else if that's too far from you. instagram.com/corrosive_design/?hl=en

song?

@TTMotorsports

3 жыл бұрын

Not sure of song name but it's from the youtube audio library found here. Open the Audio Library Sign in to KZread Studio. From the left menu, select Audio Library. You can also access the Audio Library directly at kzread.info

Do you still fabricate this?

@TTMotorsports

3 жыл бұрын

Yes I do but I cannot ship bumpers so if in California and want one email contact on our website. Tt-motorsports.com

How much for a bumper ?? Pm me

@TTMotorsports

3 жыл бұрын

Most bumpers start at $750 and am in California now but I am not working on any customers vehicles currently.

The skid plate way too high...