10 years later and still the most helpful video on YT!!
@icantintyou6 жыл бұрын
this is the way everyone should make a video. excellent job and product!
@EEExotic
5 жыл бұрын
Thank you, very basic yet straight forward :)
@book0f59 жыл бұрын
Thank You VERY Much! Clear and Easy to Follow. Much Appreciated.
@mikenguyentxable7 жыл бұрын
I bought the 3" Shackles from CB 4 years ago and my 2013 Tundra still looks AWESOME. My brother just ordered the same set for his 2014 Tundra. Glad this video is still available 👍
@jmedure
7 жыл бұрын
Mike Nguyen. did you have to do anything else to the rear? longer brake lines? longer shocks? etc?
@mikenguyentxable
7 жыл бұрын
No, just swapped the stock shackles with these Heavy Duty 3" Shackles. No other modification needed. With the Low Range Off Road (LRO) 3 in 1 Leveling Kit installed and these 3" Shackles, the look is perfect, you still have that slight rake (Bull Dog) look. FYI: I didn't use the 1" rear blocks that came with the LRO Leveling Kit.
@jmedure
7 жыл бұрын
Thanks for the reply. Was wanting to keep that factory rake and not have level or rear end sag. Sounds like this is the ticket and maybe with some 1" blocks too.
@EEExotic
5 жыл бұрын
Thank you Mike!
@knowming8861
11 ай бұрын
😮
@MegaYangman11 жыл бұрын
Great DIY video...just what I was looking for!
@TheBarahona110 жыл бұрын
Thanks the video was real helpful , that Toyota looks great
@NarrTard3 жыл бұрын
To anyone watching this, he is using the stock OEM leaf eyelet bushings in this video. The kit now comes with polly bushings. Goodluck getting the old ones out if you live in the rust belt. The OEM bushings took me about 6 hours to remove. Install of this kit is extremely easy and takes about 10-20 mins after you get the old bushings out lol.
@jaredlabriola
3 жыл бұрын
did u try torching them out ?
@SteveLNew11 жыл бұрын
Thanks for the video... Extremely informative... Things I was looking for!!!
@albertoguzman6898
4 жыл бұрын
Ü yahoo
@jdblake228 жыл бұрын
CB, Thanks again for the +2's. I'll be installing these tomorrow.
@EEExotic
3 жыл бұрын
If you'd like feel free to give us a update review.
@XFinXFanX10 жыл бұрын
Thanks for the video!
@KaskadeHD3 ай бұрын
Impressive that you have not raised prices by much at all even with the volatile steel market.
@MegaChacaritas5 жыл бұрын
awesome,,,great video,,!
@johnmpilot11 жыл бұрын
Nice shackels and good vid
@Tom2312yueyei10 жыл бұрын
Nice Video.
@gilheron34724 жыл бұрын
Do you have any videos installing the steering kit for the 3rd gen tundras?
@trdjody3 жыл бұрын
I need these!!! Hate my rear suspension setup and it feels like the RC lift makes my rear end slip when I hit bumps or off road. Worse as well when towing my gooseneck
@EEExotic
3 жыл бұрын
shop-coachbuilder.myshopify.com Let me know if you need a hand with anything.
@pcabellb9119 жыл бұрын
buen video gracias... thank you
@disabledvet42011 жыл бұрын
great video!
@pedrocolmenares824 жыл бұрын
oh teacher is very good that worlk,,congratuleychion
@NATELLICA66610 жыл бұрын
Thanks that helped a lot
@johnnyrios455411 жыл бұрын
Good video sir.
@greghupka29897 жыл бұрын
about to install mine ( finally !) . I'll be removing the shitty blocks that my dealer installed. I sourced the stock u bolts. should I simply remove the blocks, load the suspension, then tighten the u bolts and then proceed with normal install? your install video was very straight forward. just didn't know if there was a beneficial process for us that are going from a block to your beautiful shackles!
@christph3118
4 жыл бұрын
Greg Hupka Beautiful shackles😂😂😂
@oscarargueta36206 жыл бұрын
Good work
@christph31184 жыл бұрын
Anything besides shackles I would need for a 2016 tundra with a 4 in Procomp lift?
@richardmaxwell44892 жыл бұрын
so that would give me a two or three inch lift in the back so id have to change my front shocks and upper control arm is there a simple inexpensive for the front as well ?
@SC-sz9ms3 жыл бұрын
excellent. thank you!
@EEExotic
3 жыл бұрын
Glad it was helpful. shop-coachbuilder.myshopify.com
@markthibault65514 жыл бұрын
I wonder why you only make the 2 or 3 inch sets Is there a reason you dont make a longer set. I'm looking for 4" of drop. And would prefer to do it all in the shackle instead of a block and shackle mix
@Mattgx201211 жыл бұрын
I have a ford ranger I'm getting shackles for, do you recommend upgraded shocks for a 3in lift?
@phallicc4 жыл бұрын
your kits come with replacement bushings. however, i see in your video that you did not replace them. are there any issues with using the stock bushings? will the supplied bolts fit though the stock bushings?
@EEExotic
3 жыл бұрын
At the time we shot this we had not finishing designing our Poly bushing kit.. Shackle kit always includes rear leaf spring eyelet bushings and all necessary hardware. shop-coachbuilder.myshopify.com
@Merica734 жыл бұрын
Looks too easy, there has to be a catch somewhere. Great vid and a nice explanation of install.
@EEExotic
4 жыл бұрын
Solid game plan always makes things simple. www.shopcoachbuilder.com
@Thibault_9511 жыл бұрын
does it matter if i use the old bushings in the leaf? and can i anti seize the bolts if i do want to change the bushings at some point. i live in canada i plan on doing this tomorrow on my blazer shes rusty but not to bad
@VEGAS4LO12 жыл бұрын
Thanks for the video, will contact you on tundratalk
@marcbrown88342 жыл бұрын
What is purpose having longer shackles and what size will I need? I am 3" rear
@cfrefrigeracao73205 жыл бұрын
Cara criou aqui no Brasil um que não precisa desmontar todo o carro
@neridynasty1314 жыл бұрын
Do you make for Tacoma too?
@danielhannah97715 жыл бұрын
Do you make these for a 17 Tacoma?
@JuanGarcia-tl5hr Жыл бұрын
You should also remove the rear block correct?
@yonixanderferreira81474 жыл бұрын
what size shanckles will be needed and with what else to get 4" in lift on tundra rear. eliminate 4" current 4" block.
@EEExotic
4 жыл бұрын
We normally use our +3"s and a OME leaf pack. Our Largest shackles ( +3"s) provide 1.75" of actual lift.
@markyisser90047 жыл бұрын
is it harder to do it one side at a time? i know sway links like to be quite even for them to free up... is it the same for the shackles/leafs??
@EEExotic
5 жыл бұрын
you def want to remove both shackles at the same time and then install your new shackles at the same time as well, reason being the axle will pivot in line front the front hangers and will not want to twist.
@victorsalinas46665 жыл бұрын
Should the carrier bearing nuts be loosened a little since? lifting the rear is going to pull on the driveline.
@EEExotic
5 жыл бұрын
We recommend installing the carrier bearing drop kit after the shackles have been installed and the truck is on the ground. this way the carrier bearing is in a neutral position.
@austindenning36922 жыл бұрын
The shackles you installed were different that the plus 2 & 3 shackles on the ground?
@EEExotic
2 жыл бұрын
Proto Type shackles were our installed shackles. There have been a number of improvements made over the years Taka e look here shop-coachbuilder.myshopify.com
@Michael05065 жыл бұрын
David, I am about to put #1 CB shackles on my 2017 Tundra 4x4 CM, I have 290/70/18 tires on it, can I do the install with the rear tires on or do I need to remove them! Also do I need to remove the spare as well! Thanks!
@EEExotic
5 жыл бұрын
Removing the tires will make your install much easier and will also def need to remove the spare as well. Give us some feedback after your install.
@whatupguy5685
3 жыл бұрын
@@EEExotic what size would u recommend for a 6 inch lift just to get the stock rake look
@a1a2italy11 жыл бұрын
do you make shackles for all trucks or just tundra
@ricky128114 жыл бұрын
Almost perfect except for the final look of the truck with them on it
@Treyorrrr
4 жыл бұрын
Also the fact you should torque the nuts before putting weight on the bolts
@ThisGuuuy
3 жыл бұрын
@@Treyorrrr always torque under pressure
@musicjenus1239 жыл бұрын
Quick question, is this the same process to install any shackle lift on any truck?
@EEExotic
5 жыл бұрын
Each vehicle with vary just a touch but for the most part vehicles that use leaf springs will always share the functionality aspect.
@SeanHillaker8 жыл бұрын
do you make any +4" shackle...any disadvantages to this?
@EEExotic
5 жыл бұрын
+4"s are too long for OE Tundra leaf springs.
@EastBayLife5103 жыл бұрын
@6:22 bolt should be facing the street.. shouldn't you replace the bolts and nuts the same way you took them off?
@EEExotic
3 жыл бұрын
Yes, good eye, Threads should be facing out towards the bedside when installing. this will allow maximum room for spare.
@EastBayLife510
3 жыл бұрын
@@EEExotic thanks.. wasnt sure if it meant anything.. cool..
@LiloUkulele7 жыл бұрын
Any impact to steering linkage? Should I loosen up the steering linkage before install?
@Treyorrrr
3 жыл бұрын
...steering? This is for rear shackles
@rodneyanderson89513 жыл бұрын
The shackles don't need to be perpendicular to the ground?
@EEExotic
3 жыл бұрын
No, The angle constantly changes as the leafs cycle.
@Swanny71310 жыл бұрын
I would love a set. How do I contact you to discuss the proper size for my Tundra?
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
@SuperTreyone9 жыл бұрын
That awesome accent haha fckin love anericans! Lol Great vid ;)
@EEExotic
5 жыл бұрын
lol thanks!
@josegonzales3912 Жыл бұрын
I would like to purchase one of your shackles A set These don’t look like the ones on the KZread video all I could help a little businessman out I still like to purchase some shackles My bad it is I like to purchase a 2 inch I just got on your website thank you
@EEExotic
Жыл бұрын
Great, feel free to order directly from our site. shopcoachbuilder.com
@mongo12435 жыл бұрын
Do you build these for Gen 1 Tundras?
@EEExotic
5 жыл бұрын
not at this time.
@Cilos217 жыл бұрын
do shackle help lift the back of the suv 4runner I'm lost 1/2 inch cause I put aftermarket rear coil so if I use a shackle can that help bring my suv rear back up
@n2daair235 жыл бұрын
Can I use these on a tundra that is already lifted 6”?
@EEExotic
5 жыл бұрын
Yes, If your truck is running a stage I lift without front coilover normally use our +2"s and if its a stage II with coilover +3"s would be the size to use. You'll also need to bump up the size of the carrier bearing drop kit. shopcoachbuilder.com/collections/frontpage/products/coachbuilder-2-shackles-provides-1-25-of-actual-lift shopcoachbuilder.com/collections/frontpage/products/coachbuilder-3-shackles-provides-1-75-of-actual-lift shopcoachbuilder.com/collections/frontpage/products/coachbuilder-carrier-bearing-drop-kit-rear-lift-3-5
@MetallicaHeadx13 жыл бұрын
Can I add these after I already have rear block lift on my tundra? I actually already did just waiting on my new longer shocks lol
@EEExotic
3 жыл бұрын
Yes, our shackles work flawlessly with lift blocks or aftermarket leaf springs. feel free to reach out if you need help with anything else.
@MetallicaHeadx1
3 жыл бұрын
@@EEExotic cool cant wait for tomorrow to get my new fox shocks i currently have the 4.5” rear block from pro comp so now that I added the 3+ shackles its sitting nice I love it🤘
@JuanGarcia-tl5hr
9 ай бұрын
What kind of lift do you have? I have the pro cómo stage 2 6”. Did you ever remove the rear Block!?
@danmartinez36886 жыл бұрын
at 7:01 the leaf spring is resting on the exhaust. will that be an issue?
@EEExotic
5 жыл бұрын
during installation the rear suspension needs to come down quite a bit more than it will once the truck is back down on the ground. un clip your rubber exhaust hangers during install will def help.
@oscarargueta36206 жыл бұрын
Todo. Work
@markyisser90047 жыл бұрын
so, don't you have to add shackles to both ends of the leaf spring? wont it be off kilter if you just alter the one end?
@tundradude4894
2 жыл бұрын
Hell yes it would be off kilter..what do you think
@shyboy9811 жыл бұрын
blocks versus shackles which give you better ride.i'm looking 3/4" shackles for my 2011 tundra. how do i purchase them? Thanks
@EEExotic
5 жыл бұрын
Blocks provide lift but decrease ride quality by adding additional leverage to the leaf packs. Our Coachbuilder shackles provide the best ride quality possible in a shackle.
@jamesrogers9677
4 жыл бұрын
@@EEExotic So should I remove the blocks if installing the shackles? Bout to do them this weekend.
@JuanGarcia-tl5hr
9 ай бұрын
I’d recommend to removed the block and maybe add an extra leaf spring it’s a better ride for sure
@powerwark9 жыл бұрын
If I install +2" shackles, do I have to install +2" shock? and what about the front, do i have to do something about the +2" installed the back, to maintain the level?
@EEExotic
5 жыл бұрын
No, The actual amount of down travel will not require a 2" longer shock when using the OE tundra leafs. You can use a +1"-+1.5" rear shock.
@tonydijock1512 жыл бұрын
I recieved carrier bearing drop kit
@johnking61775 жыл бұрын
Hell of a production for a tutorial. I'd rather watch this for a couple hours than watch some Kylie Kardashian reality bullshit.
@Sevphotography8 ай бұрын
Watch the shackles get take out is angering 3 plus hr later and watch every video on the internet and still cannot get them out. I’m cutting them out. The top moves freely the bottom in the spring will not move no mater where the axel is jack both sides a fd in the a.
@dallasbeaner15 жыл бұрын
I can't find you on Facebook. Do have a website now?
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
@ns671fr5 жыл бұрын
Any vibrations?
@EEExotic
5 жыл бұрын
No,We include a carrier bearing drop kit in order to correct pinion angle.
@ns671fr
5 жыл бұрын
@@EEExotic how thick are these washers that correct it
@sweetaznboi2094 жыл бұрын
David ?
@KGLOVE8411 ай бұрын
+2’s only netted me 3/4” 🤷🏼♂️
@paultulloch33906 жыл бұрын
I'm interested in some shackles how do I contact you
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
@jimbob60483 жыл бұрын
Should have replaced the leaf springs bushing with polymer bushings so much better of a ride! Just sayin
@EEExotic
3 жыл бұрын
At the time we shot this install video we had not completed our poly/graphite replacement bushings. They are now standard with all Coachbuilder shackle kits. thanks for watching.
@jimbob6048
3 жыл бұрын
@@EEExotic sorry Do not pay attention to the date I was looking at the video as a reference. I just purchased from y’all just a few days ago the poly bushings for my 2021 tundra
@hashiramasenju48466 жыл бұрын
Where's your web site???
@Chinese_Chicken
6 жыл бұрын
Only FB page. Use a search and call him directly.
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
@markyisser90047 жыл бұрын
do u think shackles r better than blocks??
@EEExotic
5 жыл бұрын
Yes, Absolutely.
@bigbird5754
5 жыл бұрын
The shackles are far,far superior to a block lift. David is a true craftsman.
Пікірлер: 127
10 years later and still the most helpful video on YT!!
this is the way everyone should make a video. excellent job and product!
@EEExotic
5 жыл бұрын
Thank you, very basic yet straight forward :)
Thank You VERY Much! Clear and Easy to Follow. Much Appreciated.
I bought the 3" Shackles from CB 4 years ago and my 2013 Tundra still looks AWESOME. My brother just ordered the same set for his 2014 Tundra. Glad this video is still available 👍
@jmedure
7 жыл бұрын
Mike Nguyen. did you have to do anything else to the rear? longer brake lines? longer shocks? etc?
@mikenguyentxable
7 жыл бұрын
No, just swapped the stock shackles with these Heavy Duty 3" Shackles. No other modification needed. With the Low Range Off Road (LRO) 3 in 1 Leveling Kit installed and these 3" Shackles, the look is perfect, you still have that slight rake (Bull Dog) look. FYI: I didn't use the 1" rear blocks that came with the LRO Leveling Kit.
@jmedure
7 жыл бұрын
Thanks for the reply. Was wanting to keep that factory rake and not have level or rear end sag. Sounds like this is the ticket and maybe with some 1" blocks too.
@EEExotic
5 жыл бұрын
Thank you Mike!
@knowming8861
11 ай бұрын
😮
Great DIY video...just what I was looking for!
Thanks the video was real helpful , that Toyota looks great
To anyone watching this, he is using the stock OEM leaf eyelet bushings in this video. The kit now comes with polly bushings. Goodluck getting the old ones out if you live in the rust belt. The OEM bushings took me about 6 hours to remove. Install of this kit is extremely easy and takes about 10-20 mins after you get the old bushings out lol.
@jaredlabriola
3 жыл бұрын
did u try torching them out ?
Thanks for the video... Extremely informative... Things I was looking for!!!
@albertoguzman6898
4 жыл бұрын
Ü yahoo
CB, Thanks again for the +2's. I'll be installing these tomorrow.
@EEExotic
3 жыл бұрын
If you'd like feel free to give us a update review.
Thanks for the video!
Impressive that you have not raised prices by much at all even with the volatile steel market.
awesome,,,great video,,!
Nice shackels and good vid
Nice Video.
Do you have any videos installing the steering kit for the 3rd gen tundras?
I need these!!! Hate my rear suspension setup and it feels like the RC lift makes my rear end slip when I hit bumps or off road. Worse as well when towing my gooseneck
@EEExotic
3 жыл бұрын
shop-coachbuilder.myshopify.com Let me know if you need a hand with anything.
buen video gracias... thank you
great video!
oh teacher is very good that worlk,,congratuleychion
Thanks that helped a lot
Good video sir.
about to install mine ( finally !) . I'll be removing the shitty blocks that my dealer installed. I sourced the stock u bolts. should I simply remove the blocks, load the suspension, then tighten the u bolts and then proceed with normal install? your install video was very straight forward. just didn't know if there was a beneficial process for us that are going from a block to your beautiful shackles!
@christph3118
4 жыл бұрын
Greg Hupka Beautiful shackles😂😂😂
Good work
Anything besides shackles I would need for a 2016 tundra with a 4 in Procomp lift?
so that would give me a two or three inch lift in the back so id have to change my front shocks and upper control arm is there a simple inexpensive for the front as well ?
excellent. thank you!
@EEExotic
3 жыл бұрын
Glad it was helpful. shop-coachbuilder.myshopify.com
I wonder why you only make the 2 or 3 inch sets Is there a reason you dont make a longer set. I'm looking for 4" of drop. And would prefer to do it all in the shackle instead of a block and shackle mix
I have a ford ranger I'm getting shackles for, do you recommend upgraded shocks for a 3in lift?
your kits come with replacement bushings. however, i see in your video that you did not replace them. are there any issues with using the stock bushings? will the supplied bolts fit though the stock bushings?
@EEExotic
3 жыл бұрын
At the time we shot this we had not finishing designing our Poly bushing kit.. Shackle kit always includes rear leaf spring eyelet bushings and all necessary hardware. shop-coachbuilder.myshopify.com
Looks too easy, there has to be a catch somewhere. Great vid and a nice explanation of install.
@EEExotic
4 жыл бұрын
Solid game plan always makes things simple. www.shopcoachbuilder.com
does it matter if i use the old bushings in the leaf? and can i anti seize the bolts if i do want to change the bushings at some point. i live in canada i plan on doing this tomorrow on my blazer shes rusty but not to bad
Thanks for the video, will contact you on tundratalk
What is purpose having longer shackles and what size will I need? I am 3" rear
Cara criou aqui no Brasil um que não precisa desmontar todo o carro
Do you make for Tacoma too?
Do you make these for a 17 Tacoma?
You should also remove the rear block correct?
what size shanckles will be needed and with what else to get 4" in lift on tundra rear. eliminate 4" current 4" block.
@EEExotic
4 жыл бұрын
We normally use our +3"s and a OME leaf pack. Our Largest shackles ( +3"s) provide 1.75" of actual lift.
is it harder to do it one side at a time? i know sway links like to be quite even for them to free up... is it the same for the shackles/leafs??
@EEExotic
5 жыл бұрын
you def want to remove both shackles at the same time and then install your new shackles at the same time as well, reason being the axle will pivot in line front the front hangers and will not want to twist.
Should the carrier bearing nuts be loosened a little since? lifting the rear is going to pull on the driveline.
@EEExotic
5 жыл бұрын
We recommend installing the carrier bearing drop kit after the shackles have been installed and the truck is on the ground. this way the carrier bearing is in a neutral position.
The shackles you installed were different that the plus 2 & 3 shackles on the ground?
@EEExotic
2 жыл бұрын
Proto Type shackles were our installed shackles. There have been a number of improvements made over the years Taka e look here shop-coachbuilder.myshopify.com
David, I am about to put #1 CB shackles on my 2017 Tundra 4x4 CM, I have 290/70/18 tires on it, can I do the install with the rear tires on or do I need to remove them! Also do I need to remove the spare as well! Thanks!
@EEExotic
5 жыл бұрын
Removing the tires will make your install much easier and will also def need to remove the spare as well. Give us some feedback after your install.
@whatupguy5685
3 жыл бұрын
@@EEExotic what size would u recommend for a 6 inch lift just to get the stock rake look
do you make shackles for all trucks or just tundra
Almost perfect except for the final look of the truck with them on it
@Treyorrrr
4 жыл бұрын
Also the fact you should torque the nuts before putting weight on the bolts
@ThisGuuuy
3 жыл бұрын
@@Treyorrrr always torque under pressure
Quick question, is this the same process to install any shackle lift on any truck?
@EEExotic
5 жыл бұрын
Each vehicle with vary just a touch but for the most part vehicles that use leaf springs will always share the functionality aspect.
do you make any +4" shackle...any disadvantages to this?
@EEExotic
5 жыл бұрын
+4"s are too long for OE Tundra leaf springs.
@6:22 bolt should be facing the street.. shouldn't you replace the bolts and nuts the same way you took them off?
@EEExotic
3 жыл бұрын
Yes, good eye, Threads should be facing out towards the bedside when installing. this will allow maximum room for spare.
@EastBayLife510
3 жыл бұрын
@@EEExotic thanks.. wasnt sure if it meant anything.. cool..
Any impact to steering linkage? Should I loosen up the steering linkage before install?
@Treyorrrr
3 жыл бұрын
...steering? This is for rear shackles
The shackles don't need to be perpendicular to the ground?
@EEExotic
3 жыл бұрын
No, The angle constantly changes as the leafs cycle.
I would love a set. How do I contact you to discuss the proper size for my Tundra?
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
That awesome accent haha fckin love anericans! Lol Great vid ;)
@EEExotic
5 жыл бұрын
lol thanks!
I would like to purchase one of your shackles A set These don’t look like the ones on the KZread video all I could help a little businessman out I still like to purchase some shackles My bad it is I like to purchase a 2 inch I just got on your website thank you
@EEExotic
Жыл бұрын
Great, feel free to order directly from our site. shopcoachbuilder.com
Do you build these for Gen 1 Tundras?
@EEExotic
5 жыл бұрын
not at this time.
do shackle help lift the back of the suv 4runner I'm lost 1/2 inch cause I put aftermarket rear coil so if I use a shackle can that help bring my suv rear back up
Can I use these on a tundra that is already lifted 6”?
@EEExotic
5 жыл бұрын
Yes, If your truck is running a stage I lift without front coilover normally use our +2"s and if its a stage II with coilover +3"s would be the size to use. You'll also need to bump up the size of the carrier bearing drop kit. shopcoachbuilder.com/collections/frontpage/products/coachbuilder-2-shackles-provides-1-25-of-actual-lift shopcoachbuilder.com/collections/frontpage/products/coachbuilder-3-shackles-provides-1-75-of-actual-lift shopcoachbuilder.com/collections/frontpage/products/coachbuilder-carrier-bearing-drop-kit-rear-lift-3-5
Can I add these after I already have rear block lift on my tundra? I actually already did just waiting on my new longer shocks lol
@EEExotic
3 жыл бұрын
Yes, our shackles work flawlessly with lift blocks or aftermarket leaf springs. feel free to reach out if you need help with anything else.
@MetallicaHeadx1
3 жыл бұрын
@@EEExotic cool cant wait for tomorrow to get my new fox shocks i currently have the 4.5” rear block from pro comp so now that I added the 3+ shackles its sitting nice I love it🤘
@JuanGarcia-tl5hr
9 ай бұрын
What kind of lift do you have? I have the pro cómo stage 2 6”. Did you ever remove the rear Block!?
at 7:01 the leaf spring is resting on the exhaust. will that be an issue?
@EEExotic
5 жыл бұрын
during installation the rear suspension needs to come down quite a bit more than it will once the truck is back down on the ground. un clip your rubber exhaust hangers during install will def help.
Todo. Work
so, don't you have to add shackles to both ends of the leaf spring? wont it be off kilter if you just alter the one end?
@tundradude4894
2 жыл бұрын
Hell yes it would be off kilter..what do you think
blocks versus shackles which give you better ride.i'm looking 3/4" shackles for my 2011 tundra. how do i purchase them? Thanks
@EEExotic
5 жыл бұрын
Blocks provide lift but decrease ride quality by adding additional leverage to the leaf packs. Our Coachbuilder shackles provide the best ride quality possible in a shackle.
@jamesrogers9677
4 жыл бұрын
@@EEExotic So should I remove the blocks if installing the shackles? Bout to do them this weekend.
@JuanGarcia-tl5hr
9 ай бұрын
I’d recommend to removed the block and maybe add an extra leaf spring it’s a better ride for sure
If I install +2" shackles, do I have to install +2" shock? and what about the front, do i have to do something about the +2" installed the back, to maintain the level?
@EEExotic
5 жыл бұрын
No, The actual amount of down travel will not require a 2" longer shock when using the OE tundra leafs. You can use a +1"-+1.5" rear shock.
I recieved carrier bearing drop kit
Hell of a production for a tutorial. I'd rather watch this for a couple hours than watch some Kylie Kardashian reality bullshit.
Watch the shackles get take out is angering 3 plus hr later and watch every video on the internet and still cannot get them out. I’m cutting them out. The top moves freely the bottom in the spring will not move no mater where the axel is jack both sides a fd in the a.
I can't find you on Facebook. Do have a website now?
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
Any vibrations?
@EEExotic
5 жыл бұрын
No,We include a carrier bearing drop kit in order to correct pinion angle.
@ns671fr
5 жыл бұрын
@@EEExotic how thick are these washers that correct it
David ?
+2’s only netted me 3/4” 🤷🏼♂️
I'm interested in some shackles how do I contact you
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
Should have replaced the leaf springs bushing with polymer bushings so much better of a ride! Just sayin
@EEExotic
3 жыл бұрын
At the time we shot this install video we had not completed our poly/graphite replacement bushings. They are now standard with all Coachbuilder shackle kits. thanks for watching.
@jimbob6048
3 жыл бұрын
@@EEExotic sorry Do not pay attention to the date I was looking at the video as a reference. I just purchased from y’all just a few days ago the poly bushings for my 2021 tundra
Where's your web site???
@Chinese_Chicken
6 жыл бұрын
Only FB page. Use a search and call him directly.
@EEExotic
5 жыл бұрын
shopcoachbuilder.com
do u think shackles r better than blocks??
@EEExotic
5 жыл бұрын
Yes, Absolutely.
@bigbird5754
5 жыл бұрын
The shackles are far,far superior to a block lift. David is a true craftsman.