Toyota/Scion Oil Control Valve Filter Replacement
Автокөліктер мен көлік құралдары
Like And Follow Me On:
Facebook: / scorpionmultimedia
Instagram: / scorpion_multimedia
In this video I'll show you how to replace the Oil Control Valve Filter in your 1NZ-FE Engine
Part #: 15678-21010
HELPFUL TIP IN BREAKING THE BOLT LOOSE IN THE TIGHT SPACE: I forgot to mention in the video after taking the alternator belt I put the hex in the bolt then used the pry tool put the tip on the hex and hit the handle of the pry tool and it easily broke it loose
All vehicles with 1NZ-FE engine:
Toyota Vios/Belta
Toyota Yaris/Echo
Scion xA/ist
Scion xB (1st generation)/Toyota bB (1st generation)
Toyota Raum
Toyota Porte
Toyota Platz
Toyota Ist
Toyota Auris
Toyota Fun Cargo
Toyota Premio
Toyota Allion
Toyota Sienta
Toyota Probox
Toyota Ractis
Toyota Corolla (Axio/Fielder, RunX, Allex)
lf you like to support my channel, you can donate thru my link below:
www.paypal.com/cgi-bin/webscr...
Пікірлер: 71
Very helpful, thank you!😊
@ScorpionMultimedia
2 жыл бұрын
You're Welcome 🙏🏼
Thank you for making this video!
@ScorpionMultimedia
Жыл бұрын
You're welcome
Good job, next video "OIL CATCH CANS"
I see it now, yea that Filter is in a tight spot, wow. That hex tip is like the 2.7L on the Tacoma I believe. Its the only one that I replaced that used a hex key. All the others Ive seen was 14mm socket like on the 2.4L, 3.0L, and 4.0L. Thanks for the video.
@ScorpionMultimedia
3 жыл бұрын
Your welcome, yeah I've noticed that on some Toyota's as well not sure why some have bolts and others have hex
@ninjazzrhythm400
3 жыл бұрын
They use the Hex for clearance. Its the only reason its is for.
Still rewatching in 2023 👍
@ScorpionMultimedia
11 ай бұрын
Thank you 🙏🏼
Great video
@ScorpionMultimedia
3 жыл бұрын
Thank you
please help I have a 2009 scion xb where is the Oil Control Valve Filter location . thank you
donde esta ubicada en el motor la valvula vvt-i scionxb 2010
On computer show p1656 code I change new sensor but problem not solved my problem was when I connected ocv wire car didt not change gear some time later turn off my engine when I disconnect wire starting well and go some time gear not shift 4th &it will stay &speed meater go high 200+ &rpm&fuel not show properly some time engine turn off ... I have tired which one is problem
I suppose regular oil changes along with filter . As well , always using an engine oil flush with keep it clean and the oil control valve .
@ScorpionMultimedia
2 жыл бұрын
regular oil changes is enough as long as you stay on top of Maintenace, me personally never use any kind of flushes to either my engine or tanny tho i really wouldn't recommend any kind of flushes the idea and concept behind them are great, but in reality, they can damage your engine. The chemicals in flushing additives can damage engine seals, leading to expensive repairs in the event of an oil leak. These chemicals can also damage engine bearings; turbochargers and other oil-lubricated components.
where is it in the Toyota Yaris 2017?
Hey question? I've done everything I can think of . Another guy said this could be it on a different vid. 05 Scion xB dam cy one dead basically low power . Oil on oly that plug any suggestions?🤔🤔
@shadf7902
3 ай бұрын
Engine rebuild.
Nice video.. Apply to Yaris 2nz?? it´s the same ?? thanks..
@ScorpionMultimedia
3 жыл бұрын
Thank you, yes it's the same only as the 1nz only bottom end of the 2nz is different from the 1nz
nice video bro, i also have a 1NZFE engine too. haha.
@ScorpionMultimedia
3 жыл бұрын
Thank you, that's good you doing anything to yours?
@mechanichoechannel8716
3 жыл бұрын
@@ScorpionMultimedia havent do yet, next time. =)
@VentingEmos
Жыл бұрын
Your username is amazing. (Mechanic Hoe)
@jersonxb81
11 ай бұрын
Me too
My corolla 2007 idles rough for like 10 to 15 minutes. Goes of when put to drive. Gives p0011. Could it be dirty filter?
@ScorpionMultimedia
Жыл бұрын
P0011 could be caused by a number of reasons such as old engine oil, or not having enough oil in the engine. Other causes are more complicated, such as malfunctioning components in the variable valve timing system itself. Also could be Engine oil is dirty, Engine oil is too low, Engine oil is incorrect viscosity, Camshaft variable timing solenoid failure, Camshaft phaser is seized in the advanced position, Continuous oil flow to Variable Camshaft Timing chamber. Which is a symptom of what your experiencing other common symptoms are consist of increased engine stalling, rough engine idle, lowered fuel economy, and rattling/knocking noises from the engine.
HI buddy, mind putting what make, year and model you working on, every engine have different location for this filter. Thanks!!
@ScorpionMultimedia
11 ай бұрын
The vehicle I’m working on is a 2009 Toyota Yaris with the 1nz-fe motor
How to know when we have to replace it,? I mean the engine make's any wierd noise or some thing? Thanks for repliyin mr!
@ScorpionMultimedia
2 жыл бұрын
you're welcome. Generally, they don't need maintenance. But if you know the car has not seen regular oil changes or have seen evidence of sludge/heavy oil deposits, might be good the check on this filter. Usually, if you get a lot of engine hesitation, engine pinging, or even something that sounds like a bad rod - could be the OCV filter is clogged. When this happens, OCV is starved of oil and the VVT-i actuator will not turn like it should, running the engine off the most efficient timing.
does it need to be changed if oil change is well maintained
@ScorpionMultimedia
3 жыл бұрын
Na it don't, but it doesn't hurt to check. My car is very well maintained and almost at 200k miles and it was clean didn't even had to clean or change it
Excellent.video where is this on 1nrfe
@ScorpionMultimedia
2 жыл бұрын
Thank you unfortunately I'm not familiar with the 1nrfe motor but it will be somewhere on your cylinder head or similar location as mines
I just cleaned mine.👍
@ScorpionMultimedia
11 ай бұрын
Nice 👍
@whenrosesfadeaway
11 ай бұрын
@@ScorpionMultimedia I hope i did not miss anything 👍 Car started good and no check engine light .but a small ticking sound i can hear now. I also changed the serpentine belt for the 1st time by myself today .i was only worried that i held the end of the plastic part of the filter a bit too tight with my pliers. I cleaned it using voltronic spray made in germany. Later on i will buy a new filter. I have to order it from toyota mauritius and wait for it to be delivered by plane.🤔
@whenrosesfadeaway
11 ай бұрын
Having reached 108133km on my mileage. The filter was not too dirty. 🤔 But still i flushed it with voltronic as a preventive maintenace. I understood that keeping this cleaning is good for the vvti system .Right?🤔
@whenrosesfadeaway
11 ай бұрын
@@ScorpionMultimedia Car driven today. Everything looks in order.👍
Toyita hilux has it oil control valve
I opened mine but filter is stuck inside cant find a way to take it out
@ScorpionMultimedia
2 жыл бұрын
Have you tried some needle nose pliers or trizzers?
how often you gotta change that?
@ScorpionMultimedia
3 жыл бұрын
oil control valve filters are kind of tricky on how often or when to change it as its not always easy to tell how long they’re going to last. There really isn’t a any specific length of time that you can expect an oil control valve to stick around. It all depends on everything from how well you maintain your car to what type of car you have. An oil control valve could last you for the entire time that you own a vehicle or give out on you randomly with very little warning. My car is almost at 180k miles so i figured since I'm already replacing everything in my car with new parts and even tho i know I've been maintaining it extremely well I figured this would be dirty and almost clogged up with debris since it considered high mileage but as you seen in the video it was very clean didn't have a spec of debris so I didn't even have to clean or replace it at all but it doesn't hurt to check and make sure it clean and free of debris
@Marvin9able
3 жыл бұрын
@@ScorpionMultimedia oh really oh ok cool thanks bro ya cause I drive a 09 Toyota yaris sedan that's why I wanted to know
@ScorpionMultimedia
3 жыл бұрын
Your welcome, mines is a 2009 too
@Marvin9able
3 жыл бұрын
@@ScorpionMultimediayours is a 09 to oh ok koo
@bayanicruz8914
2 жыл бұрын
Mine is yaris 2011 model.. no parts replace still doing 180-190kph..gudday to all
What engine is this?
@ScorpionMultimedia
5 ай бұрын
1nz-fe
Recommended change after how many kilometers?
@ScorpionMultimedia
2 жыл бұрын
I change mines every 2414.016-3218.688kms
@whenrosesfadeaway
2 жыл бұрын
@@ScorpionMultimedia Thank you for your reply sir. The figures you give appears to come in at very short intervals. My car has reached past 70,000 km and i have never changed this part. I wonder if i should worry 🤔 ? And am wondering about the cost of this oil control valve now? Is it expensive ?
@ScorpionMultimedia
2 жыл бұрын
You're welcome, I change mines between 1500-2000 miles because it modified and I drive it hard. If you maintain your car really well don't need to replace it but the cost of a new one from Toyota is $10 you only gotta replace it if it clogged or filled with debris
@whenrosesfadeaway
2 жыл бұрын
@@ScorpionMultimedia Thank you.Your engine, this engine is 1500cc ?
@whenrosesfadeaway
2 жыл бұрын
What is your top speed in kilometer per hour on a highway ?
You sold the toyota ? 🤔
@ScorpionMultimedia
11 ай бұрын
Na I still have the Toyota
@whenrosesfadeaway
11 ай бұрын
@@ScorpionMultimedia 👍. I did not seat the filter on the bolt when i placed it back. I just placed the filter inside the hole like you did . On some other channels they seated it back on the small hole on the bolt . Then screwed it back. The method we did is still correct right ?🤔
@whenrosesfadeaway
11 ай бұрын
The car drives smoothly and is as quiet as usual.I also changed the serpentine belt for a new one.Normally a mechanic does it for me.i did it this time.
@whenrosesfadeaway
11 ай бұрын
@@ScorpionMultimedia 👍
@whenrosesfadeaway
11 ай бұрын
Your opinion or your expert point of view on the question ?