Toyota Rav4 Front Wheel Bearing Hub Assembly Removal and Replacement

"DO IT YOURSELF TIPS FOR THE MECHANICALLY INCLINED." Please do not do this DIY if you do not have a little experience in working on your own vehicles.
DISCLAMER: I am not responsible for any damages caused by following this DIY. Perform DIY seen on this video at your own risk. NOT SPONSORED BY ANY OF THE TOOL BRANDS USED IN THIS VIDEO.

Пікірлер: 23

  • @Iwillnotbepushed
    @Iwillnotbepushed Жыл бұрын

    Really good video. No blabbing just video. Nice! 14:19 I did this exact job today on a 2013 RAV4. Two things I learned: 1. That hub and axle do not always come apart that easy. No matter how much penetrating oil you use or what brand. I had to get a 12 ton hub puller rental at Auto Zone to get mine to separate. My 7 ton hub puller catastrophically failed. 2. I learned how to rethread the spindle. Yes I put the nut on before I hit the end. The nut actually slid up the threads and destroyed them. Harbor Freight saved the day there. This is actually an easy job if the axle pops loose easily like this video. If not get a good hub puller and a can of PB Blaster or WD 40. Spray then apply pressure and hit the hub with a hammer. Repeat until it pops off. The rest is child’s play.

  • @Themachinewon

    @Themachinewon

    2 ай бұрын

    I'm doing this next week, two front Hubs on a Rav4 EV. Getting hard deep knocking sound when turning. Any other suggestions ? Looks like a Hub Puller is the way to go ? 99,000 miles.

  • @bufordtannen9686
    @bufordtannen968610 ай бұрын

    Great video. I was stuck until I saw you hit the axle with the sledge. Thanks.

  • @mets23q
    @mets23q3 ай бұрын

    Good idea to change pads and rotors while your at it aswell

  • @hugosilva873
    @hugosilva873 Жыл бұрын

    Thank you I have Toyota rav4 2007

  • @csan255
    @csan255 Жыл бұрын

    Thanks for the easy to follow video. That's a nice torque wrench! I haven't seen one that have a flex head. Can you tell the brand name of the one you're using? Or a link where you got it? Thanks! Keep it coming.

  • @nicksdiy4152

    @nicksdiy4152

    Жыл бұрын

    That’s a snap-on 3/8 digital torque wrench w/ flex head. I got it on the Snap-On truck from work.

  • @elderorellana4440
    @elderorellana444010 ай бұрын

    what size of socket do you use to remove the axel nut

  • @Themachinewon

    @Themachinewon

    2 ай бұрын

    it should be a 32mm

  • @amandafilsinger8654

    @amandafilsinger8654

    21 күн бұрын

    My rav4 is a 30mm 12 point

  • @tyronesmith3812
    @tyronesmith3812 Жыл бұрын

    Do you need an alignment after this job

  • @Iwillnotbepushed

    @Iwillnotbepushed

    Жыл бұрын

    Nope

  • @carmelorivera3393
    @carmelorivera33934 ай бұрын

    What year's that rav4

  • @nicksdiy4152

    @nicksdiy4152

    Ай бұрын

    2014

  • @MadMan559est69
    @MadMan559est699 ай бұрын

    What was wrong with the hub, and why not change the bearing at the same time

  • @nicksdiy4152

    @nicksdiy4152

    5 ай бұрын

    Whole assembly

  • @justinhedley1535

    @justinhedley1535

    2 ай бұрын

    The bearing is inside the hub, he changed the whole assembly

  • @kodyhorder6541
    @kodyhorder6541 Жыл бұрын

    what year, or generation of Rav4 is this?

  • @nicksdiy4152

    @nicksdiy4152

    Жыл бұрын

    2014

  • @eyyo2561

    @eyyo2561

    Жыл бұрын

    My RAV4 is 2015 has the same problem it only has 90,700km

  • @Themachinewon

    @Themachinewon

    2 ай бұрын

    @@eyyo2561 What was your problem ? I have 99,000 miles and getting a hard deep knocking sound in the turns.

  • @eyyo2561

    @eyyo2561

    2 ай бұрын

    I took my rav4 to shop and mechanic replaced both wheel bearing at the front ,cost me $1300 CAD.

  • @user-rw8rj8zx5t
    @user-rw8rj8zx5tАй бұрын

    А почистить ржавчину не судьба?