“Can’t move this by hand”…..*moves by hand

I did the same with my 2.4l toyota 2 years ago. Problem fixed. All pro techs said that VVTi had to be replaced (only several grand with labor) lol! Don't forget to properly reset the new tensioner by slightly rotating the crankshaft in the opposite direction. It will open the little hook on the tensioner and allow it to extend and self adjust.

@Ezq95

3 ай бұрын

My 2012 sounds some what. Not sure.

@Steve0885

21 күн бұрын

Two different issues bro

Great video! Helped me fix my wife's 2009 Corolla

@nestorautorepair

2 жыл бұрын

You're welcome boss , I'm so happy to head that you fix your wife car using one of my video, thanks for your feedback 🙏

Nestor todo bien? Tienes algun video mostrando como suena cuando el tensioner no esta bien? Gracias

Thanks Nestor! was a big help, staright forward simple.

@nestorautorepair

8 ай бұрын

Thanks for your feedback

My f*%#ing hero I'm having this same problem in my 09 Matrix. The TSB on this advised replacing the whole timing system - an actual nightmare. Thanks a lot!

@nestorautorepair

2 жыл бұрын

You're welcome boss , Thanks for your feedback

Your my hero ! Appreciate the “tensioner” part itself , needed to retract mine 👍

Thank you for this video,my 2005 corolla started making the rattling noise , now I know the problem. Mine the noise is there constant even when I have driven the car for long, the noise doesn't go away.

@ishalljr

4 ай бұрын

did this fix it?

Even a brand new one will move by hand. It's supposed to. The only time that the tension increases is when it is installed and the oil going into the tensioner increases the pressure/ tension on the chain.

@Justin-op8gg

Ай бұрын

Hey, do you think a long drive where the oil is burned below the stick would cause the rattle to start? My 09rav4 is rattling a bit now after a 5k drive. Oil is below the stick so the oil needs a change. Hope it fixes the sound at the same time.

Thanks for your help, I'm going to buy a 2007 Corolla with 250k on it and the chain tensioner needs changed. With your help, this will be a breeze.

@nestorautorepair

2 жыл бұрын

You're welcome boss , thanks for your feedback

Got the same rattling on my 06 matrix, changed the spark plugs and it helped a little. Gonna do this next. Thanks!

@nestorautorepair

2 жыл бұрын

Ok boss good luck

@justnature135

Жыл бұрын

They didn't even show the sound of what it sounds like

Dam you made it look so easy Thank you .... :)

@nestorautorepair

3 жыл бұрын

You're welcome , thanks for your feedback Mr Sleeper

Great video. My 2010 Camry SE just started making that rattle noise a week ago. 90k miles. Definitely will check the tensioner out. 👍

@nestorautorepair

2 жыл бұрын

You're welcome , thanks for your feedback

@cee1726

2 жыл бұрын

Did you ever get it fix?

@idontknowwhattoputhere.3572

Жыл бұрын

How does you car only have 90k miles on it?

@gregarizmendez5275

Жыл бұрын

That's what everyone always asks me. It has just got 100k last week. I work about 15 mins from home. I've driven it up the So Cal coast a few times but mostly to and from work. It's been great to me.

@idontknowwhattoputhere.3572

Жыл бұрын

@@gregarizmendez5275 they’re great vehicles. ✌️ Camrys are also good.

q bueno! recién compré un 2003 CE,y encuentro este video.muy útil..gracias x compartir!!!.

@nestorautorepair

3 жыл бұрын

Gracias y felicidades con tu nueva compra Daniel

Perfect automotive how to video no bullshit and straight to the point

@nestorautorepair

3 жыл бұрын

Thanks Dylan thanks for your feedback

Good job bro, I have a 05 vibe pretty much as a matrix same engine . So when I start it's making the rattle sound like it's coming from pulleys I change power steering pump and new altenator and it makes same sound , so I guessing it's the timing chain is loose.

@nestorautorepair

3 жыл бұрын

Yes sir I'm sure this will be your fix, thanks for your feedback

@johncronk4865

Жыл бұрын

My car doing the same thing Toyota Venza 4 cylinder . I've checked everything under the hood and change heat shield, still have a loud rattling when first cranking up and when give it the gas

Best video for the tensioner , excellente

@nestorautorepair

2 жыл бұрын

Thanks bro for your feedback

You're a real one nester thank you

@nestorautorepair

2 жыл бұрын

Thanks boss , thanks for your feedback

so glad I stumbled on you😆

Thanks for the video my friend.

@nestorautorepair

2 жыл бұрын

You're welcome my friend , thanks for your feedback

Great thank you! Off to the mechanics.

*You cannot press it with your hand* proceeds to press the new one with his hand 🤝😂😂😂

Gracias por sus instrucciones de mecánica. Se le agradece Amigo.

@nestorautorepair

2 жыл бұрын

De nada gracias por su Apollo

@hernandezdiaz3769

2 жыл бұрын

Yea...that's good one. I do appreciate your advice, good friend. Salute from El Salvador, Centro América. Tkank you for your pacience, big bro."MAY GOD BLESS YOU OVERALL"🙏

@nestorautorepair

2 жыл бұрын

Gracias brother same to you

Great video! Thanks

@nestorautorepair

2 жыл бұрын

You're welcome , thanks for your feedback

excelente master!, ya tengo 2 trabajos de estos por hacer

@nestorautorepair

2 жыл бұрын

Bien gracias , cobre Bien jijijiji

Good video keep up the good work

@nestorautorepair

3 жыл бұрын

Thanks Juan

@JuanHernandez-vt4wt

3 жыл бұрын

@@nestorautorepair gracias

@nestorautorepair

3 жыл бұрын

De nada Juan

Great video, thanks! Did you replace gears also? I heard to always replace gears when you replace chain and tensioner..

@nestorautorepair

2 жыл бұрын

Hey thanks ,, I only replace the tensioner and car still driving good no noise at all

Hearing an occasional rattle at idle.....not sure if it's a water pump going bad or this tensioner....it's on the same end of zthe engine as the belt drives. Scion xA first gen. Is there an easy way to tell which it is?

Thank you. That helped me alot.

@nestorautorepair

7 ай бұрын

You're welcome, thanks for your feedback

I like the jack!

@nestorautorepair

3 жыл бұрын

Thanks boss

Nice work 👍 I have 2008 Scion xB 2.4 L would this be the same procedure to replace on my car?

@nestorautorepair

Жыл бұрын

Yes thanks I'm sure they are the same

ئيشيكى جوانت كرد هةربزى Best wishes

@nestorautorepair

3 жыл бұрын

Ok thanks

saludos cordiales, oye sabes tengo el mismo carro y tengo un sonido fastidioso, al momento de encender el auto suena como que tuviera la cadena pegando con algo, me dicen que puede ser el Piñón vvti. Que me recomienda por favor. ?

I usually use Toyota OEM but in this case, that’s the part that failed. Have you had good luck with that brand of aftermarket ones?

@nestorautorepair

4 ай бұрын

Still running I just did a fuel pump on this car last week

So you didn't replace the chain with a new one? And the tensioner magically got the slack out of the chain between the two gears? So that means there is no noise when a chain overlaps gear teeth to get tighter from the tensioner? That would be great if that was the case!

hola señor nestor, hace unos días cambie la junta de la tapa y vi la cadena y la presione hacia abajo y tiene un poco de juego pero no tanto como se muestra en su video. así que la cadena no debe de tener nada de juego al tacto? es la primera ocasión que veo su video y me gusto la explicación. gracias y saludos!!!

@nestorautorepair

2 жыл бұрын

Hola Efrain si la cadena tiene que estar Bien dura nada de movimieto, gracias por ver mis video ,, saludos

@efraingarciaescalante2824

2 жыл бұрын

@@nestorautorepair gracias por su respuesta. Se lo agradesco. Saludos!!!🙋‍♂️🙋‍♂️🙋‍♂️🙋‍♂️

@nestorautorepair

2 жыл бұрын

De nada brother suelte!! 💪

Great video thanks

Bro how about 2011 highlander 2.7l what is the procedure for it?thank u u making siple very imformative video👍

@nestorautorepair

2 жыл бұрын

I believe they are the same engine bro , so same process, thanks for your feedback boss

Excellent video! Do you know if the chain tensioner on a 2012 Honda Fit is similar to change out? Thanks for your info.

@nestorautorepair

6 ай бұрын

Thanks no on Honda they are inside

@jonboz7585

6 ай бұрын

@@nestorautorepair OK, thanks for the info. Keep up your great presentations.

I just got my mom a 2009 scion xb and it's making crazy noise and it's has great power! But that noise! She gone love it! I was gone change the whole engine thank you so much!

@nestorautorepair

3 жыл бұрын

Thanks for your feedback boss

My O7’ Corolla is making a rattling noise but only when it is in gear (it’s a manual) do you think this is the problem?

Thanks for video good job bro

@nestorautorepair

Жыл бұрын

You're welcome boss

Nestor, thanks for the video. My 2002 Rav4 2.0 liter is rattling and I suspect it's the chain but haven't looked to check the tension yet. It starts rattling about 30 seconds after cold engine starts running. i will check under valve cover tomorrow. Do you have any advice on that particular engine and part replacement if that is for sure the problem? Thanks again.

@nestorautorepair

2 жыл бұрын

Yes sir they are all the same , if you want you can take the serpentine belt off and start the car to make sure the noise is not outside

@Doomzdayxx

2 жыл бұрын

@@nestorautorepair oh yeah I definitely did that already and it wasn't. Btw what a bitch to get that belt on haha. Awesome man thanks.

@nestorautorepair

2 жыл бұрын

Lol yes sir any time

If your chains been beating against something and loose shouldnt you replace the chain also?

only if you had a video of how the noise sound. Now i'm stuck between water pump or timing chain tensioner smh thanks, great content

@nestorautorepair

3 жыл бұрын

Take the main belt off and star the car and see if the noise still there

@sadboycali

3 жыл бұрын

I'm between the vvti rattle or time chain lol I think it's the timing chain tho. It rattles on startup. Stops for a few seconds. Then randomly rattles. When I give it gas it rattles so I'ma check the timing chain when I get a chance

@nestorautorepair

3 жыл бұрын

Wow ok we'll it can still be the here , open the valve cover and see if the chain is loos

@sadboycali

3 жыл бұрын

@@nestorautorepair it was the timing chain 😄

@nestorautorepair

3 жыл бұрын

Wow , thanks for sharing

Awesome. Thanks for posting.

@nestorautorepair

3 жыл бұрын

U welcome Joseph , thanks for your feedback

Hello thanks for the video. My toyota wish has a rattle when idling and low speeds which leaves on acceleration, could this be the issue as well? Thanks

@nestorautorepair

Жыл бұрын

Hi Yes it can be

great job bro

@nestorautorepair

2 жыл бұрын

Thanks boss

Will the chain always be loose between the camshaft gears or can it be loose below and still be the problem? I checked mine and it was tight up top.

@nestorautorepair

Жыл бұрын

Need to be tight all the way

A video before of the noise would have been nice. Thanks for this video though bro

@nestorautorepair

2 жыл бұрын

👍

I have a 98 Camry makes the same noise what kind of timing chain does it carry is it the mettle or the robber belts thanks for that video..

@nestorautorepair

2 жыл бұрын

Your 1998 Camry takes timing belt rubber

God bless you!

@nestorautorepair

3 жыл бұрын

Thanks boss you too, thanks for your feedback

Hi, good video. Did this fault make the check engine light come on?

@nestorautorepair

2 жыл бұрын

Thanks boss no light ON , but if you are getting code for timing then more likely your timing chain guides broke

Im definately facing the same problem on my 2SZ toyota vitz . I will definately sort it out

Lifters pressurize with oil inside them.. hence hydraulic lifters.. I’m pretty sure you gotta prime em before hand in a cup filled with oil and u squeeze em until you cant then put the pin in em and install..

Good video! How to tell if the noise is from the chain or VVTi please? Thanks!

@glennmanchester5696

8 ай бұрын

The chain tension and slack is the reason for the noise either way and the tensioner could be getting weak and the vvt makes it tremendously worse

how did you get slack out of a chain with two sprockets that are suppose to move at the same time. is it still in time.

@nestorautorepair

3 жыл бұрын

The tensoner will do the job

You rock man.

@nestorautorepair

Жыл бұрын

Thanks boss

Hi Nestor. I replaced the timing chain tensioner and followed these instructions but I was told later that after installation and spinning the crank clockwise, you’re also supposed to spin it counter clockwise. I did not do this and heard a loud rattle at first start up but it went away. Is it necessary to spin the crank clockwise and then the other way for proper tension?

@nestorautorepair

2 жыл бұрын

No that's not true bro , never go back

@ariellopez8736

2 жыл бұрын

@@nestorautorepair thanks for that peace of mind!

@nestorautorepair

2 жыл бұрын

You're welcome boss

@MrShoryuken1

2 жыл бұрын

Guessing you've already done this repair buddy but yes the Toyota manual specifically says to turn the crank anti clockwise until the hook on the tensioner unlocks. This should only take a very small amount of rotation and you'll hear the click. Then crank clockwise to extend the tensioner, you'll hear a series of clicks.

@nestorautorepair

2 жыл бұрын

Yes

Hello Nestor. Firstly I would like to say thank you for the Video. It was very insightful and watching it makes me confident enough to attempt it. After watching the video I realized my car has a similar but slightly different issue. When I start the car up and the motor is cold it has a gentle idle. The moment I rev it to set off, it has this very rough sound. Asif the oil has not worked its way through. It has an almost metal to metal sound. Once the motor reaches the correct temp. It goes away and idles nice and soft. Nestor, what could the issue be. Its a 2010 Toyota Auris (Same engine as the Corolla)

@nestorautorepair

2 жыл бұрын

Hey thanks for your feedback , I will recommend removing the valve cover and see if the chain has any play and we go from there , there can be many other staff that can make noise , or you can take the main belt off and start the car and see if the noise still there thee. You know for sure if the noise is internal or outside the engine .

@Sinquahproduction

2 жыл бұрын

OCV filter?

@nestorautorepair

2 жыл бұрын

Yes

My 2008 Toyota Corolla was making noise and now the motor is spinning fast no start. Can you tell me if this is what it could be ? I've asked folks when it was making the noise and of course no one knew what it was, I guess I'll take the valve cover off and go from there.. I wish I had found your channel before it broke down ! Thanks for sharing and fingers crossed and hope I can fix her ..! Oh new subscriber too I will tell folks about your channel..

@nestorautorepair

Жыл бұрын

You're welcome boss thanks for your feedback ,, if I was you before removing the valve cover remove the spark plug and read the compression need to be 120 and up each sylinder

Where did the retaining pin go?

Do you need to have the valve covers/spark plugs removed to replace this? Or can we just replace it without disturbing these items? Do you crank the engine in neutral? Thanks!

@Regulated-Liability-Network

Жыл бұрын

You can do without remove all of that. Can reach from behind the engine & remove and install the new.

Is this the fix for the chain rattle you can hear clearly when the engine is idling? I have that weird chain noise that sounds like something is loose inside the engine in a 2011 Rav4

@nestorautorepair

Жыл бұрын

Yes this was the fix

Nice work!! And, it's the same for a Scion xd 2008 ??

@nestorautorepair

2 жыл бұрын

Yes sir Same, thanks for the feedback

What if the chain is tight but you have that noise?

I received a 2009 1.8 Corolla to work on and the thing throws p0300, p0301 codes and other misfire codes P0302, etc. I have changed the oil and filter, air filter, spark plugs, the battery, I have tested the injectors, i have tested the Ignition coils, i have cleaned the throttle body and i have cleaned the mass airflow sensor. The car stalls out a lot and shakes. It also goes into limp mode if it shakes too hard. My cousin said it sounded like a rod knock, but i can't hear it that well. I do hear noise over by the timing chain, so im going to follow your guidelines and see if my chain is loose. Thanks for all of the info. I'll let you know if it solves my issue.

@nestorautorepair

2 жыл бұрын

Yes sir thanks for your feedback , also make sure you do throated relearn

@nelsoncanelas1978

2 жыл бұрын

How do you perform throttle re learn on these? Do you have a video?

@nestorautorepair

2 жыл бұрын

On Corolla you don't need to , only Camry needs it

Tengo el mismo problema en una Toyota highlander 2005 2.4L gracias

@nestorautorepair

2 жыл бұрын

Ok si eso tiene que ser

Thanks gotta do this to my 2009 rav4 sport.. that rattling from the cold start is driving my wife crazy she thinks the motor is gonna break!

I thought there was a chain guide at top Nice video

@nestorautorepair

4 ай бұрын

You’re welcome boss no guide on top like Chevy

Wow that previous silicone job was scary!

@nestorautorepair

2 жыл бұрын

Yes lol

@roshi98

17 күн бұрын

Could be worse. They could have used spray foam.

@elonmust7470

17 күн бұрын

@@roshi98 oh lord

Definitely should have had some before and after sounds 😢

@nestorautorepair

6 ай бұрын

Noise on cool start

I did this to Scion XB it's easy. My Rav4 w/ 3GR-FE, V6 engine made this crazy chain slapping noise after oil changes last week. Now every morning cold start it making whizz noise like a bad belt. I'm afraid to start it in the morning.

@nestorautorepair

5 ай бұрын

Wow

I noticed my Yaris 07 making rattle noise only when accelerating and only when cold for first 6-7 minutes. Later almost gone. Could this be tensioner?

@nestorautorepair

2 жыл бұрын

Most likely yes

i have the Rattle noise I changed VVT-i filter, the old one is very good no carbon bullied but Rattle still there

I am having engine rattle at high sped in my Lexus ES330. The engine i s having a toming belt not chain, with 2 camchains (V6 engine), can you advise what should I change

@nestorautorepair

3 жыл бұрын

Mmmmm sound like you need better oil and see if that fix it , is hard for me to tell you if I don't hear the noise

I have a 2012 Camry SE and I’m sure I have this problem. How much does it normally cost to replace this?

@nestorautorepair

3 жыл бұрын

Not a lot under $100

Does that noise happened in the cold weather or it happens all the time. I have similar noise on my 2009 Corolla but not sure it is starter or chain. The noise sound like, when car starting and I try t start again like starter gear hit flywheel gear but not 100% sure. So far, It seems like only happen in cold or car stayed over night. After car warm up, no more start up noise. Thanks for the video. Thanks in advance.👍

@nestorautorepair

2 жыл бұрын

This noise was there all the time but stronger when you first start the car

@callmebackfriday2

2 жыл бұрын

@@nestorautorepair Thanks for the information.

@nestorautorepair

2 жыл бұрын

You're welcome boss

Gracias bro creo que este es el mismo problema que tengo por que es por la manana cuando primero voy arrancar el carro voy inventar de tratar de arreglarlo yo mismo..

@nestorautorepair

3 жыл бұрын

Dale brother gracias por tu feedback , suelte

@jomaksimo

Жыл бұрын

@diavolow9 Lo hiciste? Que pasó con tu problema de primer arranque?

@diavolow9

Жыл бұрын

disculpen por no dejarles saber del update del arreglo , en mi caso si funciono yo no saque la tapa solo cambie el tensor me arriesgue y lo compre por que no costaba mucho el arreglo lo hice por habajo si esta incomodo pero quedo bien si estube pendiente si liquiaba pero todo quedo al día. al arreglarlo como sea tenia un leve ruido similar al que ya tenia pero leí en otro lado que es normal. Nota en mi caso si era el tensor hay varias partes integradas en esa área que pueden ser el factor, yo hice mi tarea y busque por todos lados para informarme si buscan en you tube o Google pueden encontrar la ayuda que nesecita. sino el caballero de este video tiene su info el ayudado a muchas personas arreglar sus carros gracias a todos y feliz Año nuevo.

@nestorautorepair

Жыл бұрын

Gracias brother por su Apollo

I would of changed the vvti , cam gear most definitely if I was to do all what you did and waterpump , then it's pretty much good 4 remains of it's life.

does this work on camry and scion ,

Where is the tensioner installed? It looked to be outside the block.

can I replace the tensioner without removing the valve cover?

@nestorautorepair

Жыл бұрын

Yes you can

thank you. what kind of jack is that? do you have a link?

@nestorautorepair

4 ай бұрын

Thanks sure I will send you the link later today

Great tutorial. What happens if we don't repair this can it break something?

@nestorautorepair

3 жыл бұрын

Yes the engine will jump timing and that will be a done engine will need a new one, thanks for your feedback Dicofol

@vindieu

3 жыл бұрын

exactly as he says. this problem not repaired = wrecked engine, no salvation.

@darktinoreygamer5066

2 жыл бұрын

@@nestorautorepair not really bro. It will bend valves. Papi.

@nestorautorepair

2 жыл бұрын

Ok papi

@bidenkidsniffer4926

2 жыл бұрын

@@vindieu i have not found one person yet in any forum or youtube comments that said it wrecked their car. Seen some with over 200k miles and still makes noise on cold start n never caused issue

What kind of jack is that ?

I just put a new valve cover gasket in maybe 700 miles ago on my corolla do I still have to put a new one if I do this job ?

@nestorautorepair

2 жыл бұрын

Not really if you did not add silicone you are good to use it again

Hola yo tengo un 2008 Toyota Corolla ce y tiene low idle 500 Le limpie el throttle body y cambie las spark plugs y pvc y sigue lo mismo el throttle body es electric me puede ayudar con el problema y no tengo check engine light on

@nestorautorepair

3 жыл бұрын

Hola Juan me Suena coni queens esta falta de gasolina trata de medirle la pression del gas, oh tambien trata de limpiarle el mass air flow . Pero cuando hay problema en un carro y no hay codidlgo el 90% ba ser gas . Purse ser bomba de gas mala. Injector tapado, filter de gasolina tapado

Tengo una 2009 matrix ....y suena igual .. Pero tambien se prendio El check engine .. El taller esta a 10 min ...puedo seguir manejando hasta llegar al taller ?? Me da miedo que sea la timing belt

@nestorautorepair

Жыл бұрын

Hola si suena mucho , no lo maneje , echale aceite primero aver si la bulla desaparece

In my own car toyota camry 2003 the chain is hitting the side timing chain side cover. Can it b caused by this same part

@nestorautorepair

Жыл бұрын

Same problem , but open the top and make sure the top guide is still there

Wassup Nestor I have a 2010 Camry 4 cly and I have the rattles upon cold start it’s sucks! What’s the difference between the vvt cam gear rattle and the timing chain tensioner rattle? Also if it would be the tensioner would I need to adjust the timing or double check the at any point?

@nestorautorepair

3 жыл бұрын

Hello well for the vvt your will get a code and also the rattle will never go away ,, if there is no code for timing you don't need to adjust it just add the new tensoner

@fermej6020

3 жыл бұрын

@@nestorautorepair but in the 2010 Model the tensioner is behind (inside) the timing cover?

@nestorautorepair

3 жыл бұрын

Yes you are correct 2010 has it inside it will require to remove the side cover

@fermej6020

3 жыл бұрын

@@nestorautorepair is it better just to go the hole timing chain kit since i would already be going thru the trouble?

@nestorautorepair

3 жыл бұрын

Sure to be safe just do the new kit

i have an intermittent rattle sort of noise (or the sound of shuffling poker cards) when i rev my engine in park and let off the gas pedal. I don't have any noise at startup but could this still be my timing chain or is it likely something else?

@tylerhilton03

Жыл бұрын

Did you ever figure this out, I’m in the same boat and we’ve already worked on the timing chain and it did not fix the noise, though it did seem to make it better

Do I need to replace the valve cover gasket?

@nestorautorepair

3 жыл бұрын

Yes is recomende

Did you had power loss before you fixed it? Because my Yaris has a rattle and has power loss as well

@nestorautorepair

3 жыл бұрын

Not really

My car does this when I accelerate could it be this ?

Good job brother👍🏻

@nestorautorepair

3 жыл бұрын

Thanks Hot

hola pregunta porque hace ruido el caro al enseneer solo cuando se prende una toyota rav4 09

My chain makes a noise on my manual 2003 Viti RAV4 it comes and goes but it’s revving or stalling at lights etc... is that tensioner or chain ?

@NatalieAnne22

3 жыл бұрын

By the way love your no fuss way of getting to the point

@nestorautorepair

3 жыл бұрын

Start with the tensioner first

@NatalieAnne22

3 жыл бұрын

@@nestorautorepair thank you so much!

@nestorautorepair

3 жыл бұрын

U are welcome

Were you able to find the error codes on engine. I have a rattling noise also on my 2007 corolla and it says fault code p0012.

@nestorautorepair

2 жыл бұрын

Yes

My toyota corolla 2009 having rattling noise on cold start for 10-15seconds, Mechanic told me to change complete timing chain... So should I change Complete chain system.... or just Timing tensioner ? Please help 🆘..

@nestorautorepair

2 жыл бұрын

Just the tensonador will do it if that's the noise , don't spent all that money on a new chain

@lordof_goodness

2 жыл бұрын

@@nestorautorepair okay ..thank you so much for your reply ♥️👍

@nestorautorepair

2 жыл бұрын

You're welcome boss thanks for your feedback Anand