Listen up everyone, this guy right here is INCREDIBLE! I just finished replacing this sensor following Tony the Truck Guys tutorial. All of his directions were spot on! My local dealership wanted to charge me almost $900.00 just for this. I spent $200.00 for the sensor and about an hour getting it changed. Big thanks to you Sir!!!

@TonyTheTruckGuy

2 жыл бұрын

Ayyyy, glad I could help!

Thanks, watched a few videos. This is the only one I found with correct info. Even has links for the parts. I ordered the part and fixed 2003 Camry V6!!!

Awesome! Thanks. I got the same code and needed to know which one was sensor 1 bank 1. The other traction code you are getting is usually fixed by calibrating the sensor. If you disconnected the battery it will need recalibration.

Thank you for the video and the parts list, A lil WD-40 made the job easier for me on bank 1 S 1 2003 camry

@TonyTheTruckGuy

Ай бұрын

@@trevorjohnson8736 Awesome! Glad you got it!

Great video Tony. Clear camera work, covered all the details. I have to scan my V6 Camry to see which sensor needs replacing, but I'm sure I can replace it with the help of this video!

@TonyTheTruckGuy

3 жыл бұрын

Thank you! Good luck!

@homer4163

3 жыл бұрын

@@TonyTheTruckGuy Done! It was bank 1 sensor 1, so the exact same one as this vid. Wasn’t frozen on badly at all, especially considering it’s a 15 year old car in the northeast. I bought the slotted socket for this. The hardest part was getting enough leverage on the breaker bar. And pulling off the connector was no picnic either. Thanks for the help!

@TonyTheTruckGuy

3 жыл бұрын

@@homer4163 Haha, exactly. Glad it went well!

Probably the best verbal instructions associated with any other video I have seen (in contrast with other videos that have only music accompaniment)! Remarkable video too-must be that third arm you were born with!

@TonyTheTruckGuy

3 жыл бұрын

😂😂 thanks! I’m glad you found it helpful. Appreciate the positive feedback 😃

Great details tutorial! Tony. Thank you very much.

@TonyTheTruckGuy

5 ай бұрын

You’re very welcome!

Thank you Tony!

@TonyTheTruckGuy

Күн бұрын

😊

Man this may help me soon I think I have to do all four or at least 2 on my 03 Camry xle V6 this was thankful

damn finally i found rights one!!! thanks god bless you!!

Very good and detailed video. Thank you for posting this. I laughed out loud when you said the AC line dripped in your face because that's exactly what happened to me. Unfortunately, I have a 1999 Solara and I can't really get my hands in there like you can.

Great detailed video, thanks 😁👍

Nice video, what is the corresponding toyota part number for this denso part number? Thanks!🇵🇭

@TonyTheTruckGuy

Жыл бұрын

Not sure, but Toyota uses a lot of Denso products from the factory, so this might actually be the OEM sensor.

this helps a lot I just ordered the sensors i need and they should be here on Friday

@TonyTheTruckGuy

3 жыл бұрын

Good luck with install!

Great video thanks

Very good video ! Got done my codes

What symptoms was the driver having? Having similar issues here with my 3.0L 2005 Camry. Low voltage on my bank 1 sensor 2.

@TonyTheTruckGuy

2 жыл бұрын

No symptoms other than the engine light illuminated with a code for this sensor.

@andrewhoopengardner2882

2 жыл бұрын

@@TonyTheTruckGuy thank you for the reply! My acceleration has been slow on the get go.. car is in the shop now, we will see! Great video man! Love the channel.

@TonyTheTruckGuy

2 жыл бұрын

@@andrewhoopengardner2882 Thank you! Good luck with repairs!

Is the bank 1 sensor 1 in the same location on a 2.4 L Toyota Camry LE ?

@TonyTheTruckGuy

Жыл бұрын

Not sure off the top of my head, but I think this is a 2.4 in this video and he’s doing bank 1 sensor 1 - kzread.info/dash/bejne/ZYV8p7Ozg87cpZs.html

@syrian-t3848

Жыл бұрын

Thanks man, this was a big help

Hey bud I have a question My 2010 camry 62, 000 miles. After filling up tank I noticed the engine light and slip light showed up. I was thinking the gas cap I cleaned it didn’t help my battery was older so I changed it. I went to parts store and I got a code p0137. My question is is it really a sensor issue the dash sign is not there all the time. It came and disappeared after changing battery.

@TonyTheTruckGuy

2 жыл бұрын

If there’s no light on currently, I wouldn’t worry. If it comes back with that same fault, it’s likely the sensor.

@thomas9469

2 жыл бұрын

@@TonyTheTruckGuy Alright cool. Thanks

10/10 thanks a bunch for the clear explanation

@TonyTheTruckGuy

3 жыл бұрын

Thanks for the positive feedback!

Very nice video.thanks for help. God bless you. 🙏

Awesome video brother

Have you ever tried to clear the airbag code? Have the same light on my Camry 2005 V6, and in the center screen says Passenger Airbag Off. The problem started after my car got flooded by a storm.

@TonyTheTruckGuy

2 жыл бұрын

This airbag light was on because the car got T-boned and the passenger side curtains deployed. You probably have some corroded wiring or something. Also that light should be on if nobody is in the passenger seat. If someone is in the passenger seat, then it’s not working right.

Excellent explanation. I have the same symptoms of both upstream AF sensors having constant .66v reading on 1999 Camry V6 without any codes & CEL. Does anybody know why the AF sensors for bank 1 and 2 are different? Are they custom designed matching the these two banks?

@TonyTheTruckGuy

3 жыл бұрын

Not sure on your ‘99, but this ‘06 has a different connector for each sensor, so position did matter. I would try to get the exact position you need if possible (bank 1 sensor 1, etc).

Might be because you hooked that system up. Happened to me but when I took the plug out never saw it again

Very nice!

Good video!

Please help…I have a 2009 Toyota Camry and my car alarm will go off multiple times at night…..I turn off everything and lock my doors without the key fob and it continues to go off….can I remove the alarm thingy or something??? I’m honestly over this car and it was given to me

@TonyTheTruckGuy

2 жыл бұрын

I’m unsure if there’s a way to disable the system. You may have a poor battery connection or bad battery. Or possibly a bad key fob battery

I have bank 2 sensor 1 that's turning check engine light on. Isn't that the easy one to get to right under the hood. Also do you know the Denso part# for that sensor? Thanks!

@TonyTheTruckGuy

3 жыл бұрын

Assuming you have the same engine as me, the bank 1 sensor 1 SHOULD be the one I pointed at around the 2:20 mark. I do have a bank 1 sensor 1 listed on Amazon in the video description if you want to buy it online but that should at least get you the part number.

@chdjhns

3 жыл бұрын

Bank "2" sensor "1" 2006 Camry ole 3.0 V6. Is that the Denso 234-9042 ?

@TonyTheTruckGuy

3 жыл бұрын

@@chdjhns It should be, that’s what came up when I searched for it and that’s what I have listed in the video description.

@chdjhns

3 жыл бұрын

Thanks

What is the denco sensor part number??? I need to do this to my 2004 Toyo Camry SE V6

@TonyTheTruckGuy

2 жыл бұрын

I have the links listed in the video description 👍

@FRJ1982

2 жыл бұрын

@@TonyTheTruckGuy so is it the same part number as the b2s1? Trying to figure this out and you are the first video I've seen that talks/shows this sensor's replacement

@TonyTheTruckGuy

2 жыл бұрын

@@FRJ1982 I have the B2S1 listed. All 4 positions are listed sctually

Is it possible doing it from the top? Even if you have remove a few pieces

@TonyTheTruckGuy

2 жыл бұрын

I’m sure it’s possible, just not very fun lol

@mgxceo

2 жыл бұрын

Hey do you have a social I can reach you at for a quicker response? I have a few questions as I’m doing the change of the sensor right now

@TonyTheTruckGuy

2 жыл бұрын

@@mgxceo I’m pretty good about replying on here so long as I’m not actually busy, otherwise you can email me at TonyTheTruckGuy@Gmail.com

@mgxceo

2 жыл бұрын

@@TonyTheTruckGuy ok coo. Question 1. I’m iffy on using only one stand and a jack with tires to support while I’m under there. Do you think I can lift from the side and go under the car from the side instead of going under the front?

@TonyTheTruckGuy

2 жыл бұрын

@@mgxceo Yeah, I wouldn’t trust the stand on one side and the jack on the other, so probably better to jack up whichever side you’re working on and just support that side with the stand and make sure to block the wheels with something

Replace the one on the exhaust now it's say the one front of eng 2.4 4cyl here we go again it won't fix mine 04 Camry that was 125 .00 the other one front is another 80 plus their labor

@TonyTheTruckGuy

2 жыл бұрын

Make sure the correct one is being replaced. It may be different on the 4 cylinder

Why not go in from the engine bay? Unless the V6 Camrys have got the Bank 1 Sensor on the bottom of the car and it is not in the engine bay.

@TonyTheTruckGuy

2 жыл бұрын

Yea the location is in a poor spot, it was easier to come from the bottom in this instance.

@MetalPopka

2 жыл бұрын

@@TonyTheTruckGuy Yeah. In the 2.4 liter models, the upstream sensor is in the engine bay and it's really easy to access.

You still check your messages

@36kirka

2 жыл бұрын

I'm looking for a video for the replacement of a 02 sensor for a 2005 toyota camry base model bank 1 sensor 2 can you help

I have the same exact vehicle and same exact issue replaced the o2 sensor but did not solve the issue and code reader is still showing p0031 bank 1 sensor 1

@TonyTheTruckGuy

2 жыл бұрын

Did you clear the code after replacing the sensor?

@joeb8725

2 жыл бұрын

@@TonyTheTruckGuy yes

@TonyTheTruckGuy

2 жыл бұрын

@@joeb8725 Very strange. And you’re sure the connector for the sensor is plugged in all the way? No bent or corroded pins? Also what brand sensor did you use? I wonder if you got the right one.

@joeb8725

2 жыл бұрын

@@TonyTheTruckGuy I didn’t do it myself my mechanic did it

@TonyTheTruckGuy

2 жыл бұрын

@@joeb8725 Oh I see. Well if you brought it to them for repair and you’re still having the same issue, I’d bring it back to them because they didn’t diagnose it right and verify repairs. Unless you just went in and told them to replace the sensor without doing any diagnostics.

Help! I need you.

@TonyTheTruckGuy

2 жыл бұрын

I can try, what’s up?

@ritarosado4673

2 жыл бұрын

I don't know who I can trust to fix the problem on my car. Toyota camry 2006 LE CHECK ENGINE LIGHT IS ON. I TOOK IT TO AUTO ZONE. ITS THE bank 1 sensor 1. :( any advice?

@TonyTheTruckGuy

2 жыл бұрын

@@ritarosado4673 Well without looking at scan tool data or doing some testing, I can’t say 100%, but I’m guessing your O2 sensor is bad. If you have the same engine as me, you’ll be replacing the exact sensor that I’m replacing in this video.

@ritarosado4673

2 жыл бұрын

Thank you so much.

O