Nice work, so enjoyable to watch.

That is one clean intake. This engine will be purring when you get it back together.

Thanks for this video too! i took the plumbing off, cleaned it up, thinking of painting it and forgot its orientation thankfully there's you doing the good work lol

@terenfenn9672

Жыл бұрын

Hey, I have a question and need a wee bit of info, How can I get hold of you? I have two bots with spacers from somewhere by the fan bracket and I can't recall where, nor can I figure out where they go. Plus I have something odd going on with the new belt. Crank is centered, belt matches all marks but when I then move crank pulley to "o" at TDC, the cam pulleys are then way off. ????

Thank you for this I am rebuilding my 3vze as well and was wondering what color to go with and that just looks so good

@PracticalEnthusiast

3 жыл бұрын

Thanks! Check out the vid description for the exact paint I used.

I like that you did a great job and your proud of your stuff

OK.... very satisfying to watch... Another great quality video. Here is where my engine compartment craziness will show again. The VHT Wrinkle Plus grey would not have been "factory" but would have looked very unique. Also, you just gotta take the time to mask off the TOYOTA and grab some Testors Enamel Model paint and paint those letters. Works on throttle bodies as well. "A friend," told me. To mask there is also this liquid rubbery shield stuff you can get at Hobby Lobby. But it can be tricky and I have found it almost easier to just mask with tape. On recessed stuff, I paint with hobby syringes with very large gauge needles. Can't wait for the next installment.

@PracticalEnthusiast

3 жыл бұрын

Those are great tips Scott, thanks for sharing!

Okay now I really want to do this to my 3.SLOW lol. You sir have earned a subscriber 3.SLOW life. 4Runner Mafia

Missed a spot :p ... jk I came to your channel because of your bmw e30 restoration and have been looking for your videos every week since then! Great work man.

@PracticalEnthusiast

3 жыл бұрын

Lol. I didn't want to mess with disassembling the throttle body. :)

Big time “Restoration of Everything” vibes in this video 🤣🤣

@alexmoran2460

3 жыл бұрын

I love that channel!

Amazing results, wish the throttle body could’ve got some love to match the manifold.

Well today I learned the x-acto knife & tape trick. Never even dawned on me to do that before....

Nice. Let your work and results speak for themselves.

I had a 1990 Toyota Pickup with that exact same engine. I miss that truck something terrible. :(

Great job and video

How in the hell did you learn to do this! Did you work for Toyota or have you had that motor apart a few times. Big props. You know your shit!!!

Sgt. Roos, John T.(Ret.) I'm sure that the Toyota Techs thought they had done a great job on the 6 cyl., but wow! What problems... I hope you can fix their mistakes!:) Semper Fidelis

is that paint can handle the heat ? how does the engine look after a year or 6 months?

Spray paint :( That aluminum would have great for blasting. If that's not an option, Eagle 1 MAG wheel cleaner will bring the aluminum back to new without the need for paint. You could clear coat it after, if you wanted it to last longer.

@PracticalEnthusiast

3 жыл бұрын

Cheap and fast is the name of the game here. It'll be just fine for this truck.

Super Stuff!

Where did you get the new V6 3.0 EFI label?

I'd offer that this is more of a plenum paint job and using a fine scuff pad like a scotch-brite (can attach to drill) would have resulted in a more factory appearance. They polish the aluminum without marring the surface of the aluminum.

How are your arms not tired from moving so fast for so long?

Do you know what part # the little paper gasket for the peto tube looking thing underneath the cold start injector is?

@PracticalEnthusiast

3 жыл бұрын

Yeah, that's one of the EGR gaskets. 2562965011

Que materiales utilizas para limpiar

You make this engine too nice and you will have to restore the whole 4runner.

@PracticalEnthusiast

3 жыл бұрын

This is a genuine concern! It happened with my E30 as well, and it was just going to keep progressing if I didn't sell it. That was my main reason for selling it. Something most won't understand until they're in the predicament themselves!

@Gramps83

3 жыл бұрын

@@PracticalEnthusiast You sold the E30?! Guess you can't keep them all. I just ordered a bunch of parts for my MX-3 GS. Thought about filming it for a future youtube debut. But IDK.

@PracticalEnthusiast

3 жыл бұрын

@@Gramps83 yeah, I sold it a year ago actually. Filming a project is rewarding but be sure to budget in the time to do it!

What was the second cleaner you used? (Not the purple bottle)

@PracticalEnthusiast

3 жыл бұрын

That's just water for rinsing.

Quick question , did you clean the inside ? Mine had alot of carbon looking buildup. Not sure why. Anyone else have this ?

@firstcosmicman3742

Жыл бұрын

i have this too, i’m guessing it’s from the egr dumping exhaust gas back into the plenum

@ 10:29 is everything.

What did I miss? Where did you clean out all those ports (inside) on the plenum?..jc

@rTravtrj

3 жыл бұрын

I don't think it happened its hard to do. I'm doing it on mine and resorting to the gasoline bath

@Samson-EC

3 жыл бұрын

Ok, thanks..jc

All that work, I would think polishing would be more rewarding

Did you paint the vacuum lines silver?

@PracticalEnthusiast

2 жыл бұрын

I did. It was a slightly different color of silver though.

I just did this same thing to mine over the weekend! My cold start injector went bad and was dumping fuel into the plenum so bad it was running out my MAF and air filter. Plenum was so terrible on the inside. It took me 3 hours

@PracticalEnthusiast

3 жыл бұрын

Somehow the CSI on this one doesn't have issues.

@kaleljll1

3 жыл бұрын

@@PracticalEnthusiast Now I really want to paint my plenum....thanks man. 🤣 Where did you get the badge for the plenum?

@PracticalEnthusiast

3 жыл бұрын

@@kaleljll1 you should! The part number is in the description. You can get it from lots of places, prices vary, but it's cheap.

@kaleljll1

3 жыл бұрын

@@PracticalEnthusiast I just saw that in the description after I asked. Sorry, I should have done some research before I asked you. Got one ordered from ebay for 10 bucks!!

@PracticalEnthusiast

3 жыл бұрын

@@kaleljll1 no worries! I picked mine up on eBay as well, but wasn't sure if there were better deals elsewhere. But once you figure in shipping it would probably be more than that anyway!

Oh man, well now you are gonna have to do the rust on the body. The engine is gonna look way too clean to leave it alone:)

10:01 whar is that? 3 black tips

@PracticalEnthusiast

2 жыл бұрын

I think it's just a 3 pronged vacuum port.

В посудомоечной машине хорошо отмывается

Instead of V6 3.0 EFI. It should’ve been V6 3.SLOW 🤣👍

Pero cuál restauración ese cuerpo de aceleración está limpio 🤦 le hubiera mandado el de la Runner estába de miedo 😁🤣😅

You should have deleted the egr system while you were at it

The correct way is to tumble it in correct media. I would never paint it like this.

@jvogler_art4708

2 ай бұрын

Paint is totally fine. Know it all.

@Autoguru83

2 ай бұрын

@@jvogler_art4708 Half ass is fine as long as you know it's half ass..now you do.

Limpiar los inyectores 3VZE Toyota

Hate it. Proper restore, bead blast the aluminum bright again, clearcoat it. All hardware and tubes vibration tumble in walnut shells. Re zinc plate if nec.

@PracticalEnthusiast

2 жыл бұрын

Lol cool!