about to do my first full rebuild on a 3VZ. appreciate the info and can’t wait for the next video on the build process!

@TrentsGarage

Жыл бұрын

Hell yeah brother! I just picked up a 99 4runner so I might start doing some videos on that one too. Thanks for watching and commenting, be sure to subscribe if you haven't so you'll be notified when I post new videos!

You ever get the heads back from the machine shop brother man. I just got to the point lastnight of putting the timing belt new idler, new tensioner and all the covers back on my 94 3zve. I went with an engine tech master kit with mls head gaskets to go with my ARP head studs. The only rebuild videos for a 3.0 I can find are for the bottom end so I hope to see you upload the rest of this build lots of good info here good work man. That’s a slick extended cab pickup you got I’m glad you’re keeping it alive with the 3.0 most aren’t fond but hell they’re little tractor engines😂 poor maintenance and still roll over 400k miles gotta love em

I can't wait to pull mine out and breathe some life into it

@TrentsGarage

Жыл бұрын

Get on it son! I just picked up a 1999 4runner. Going to be another build I'm doing, nothing crazy. I'll probably do a walk around video of it soon. Just got a lift for it in the mail today.

@SemperMortem

Жыл бұрын

@@TrentsGarage I installed the rough country lift about 8 months ago on my 92 runner. Eventually I will do the solid axle swap if I can find me a decent donor at the junkyard!

@TrentsGarage

Жыл бұрын

@@SemperMortem I have a 1985 solid axle sitting in the bed of my 1990 if decide to SAS it. I went with the freedom offroad adjustable coil over kit for the 1999 4runner.

@SemperMortem

Жыл бұрын

@@TrentsGarage looks like im gonna start sooner than i planned, I think I spun a bearing after getting no oil pressure for a minute when I fired it up after doing the manual swap.

I’ve built one from scratch about 8 years back. Sprayed the block bronze. Looks good bud 👍😎

Just did this and more to mine. Still working on getting my computer to jive with all it's systems, again.

Niceeee 🤙🏽

@TrentsGarage

Жыл бұрын

Thank you

Didn’t tape off the bottom end or cylinder deck for over spray?….. edit (tape off with plastic bag)

I use Permatex on my freeze plugs. I don’t put them in dry.

What book are you referring to for the rebuild?

where did you buy your rebuild kit?

Okay I subscribed I’m still a fan of 3vze and I know it’s about time for complete refresh Damn you man, now I’ll have to it Where did you get your gasket kit and are they all new parts?

@TrentsGarage

Жыл бұрын

DNJ Engine Components is where I purchased my rebuild kit from. You will also need Toyota FIPG as well. Thanks for subscribing brother! I appreciate it

where did you buy your kit?

Just a quick question here did you do your crankshaft endplay? it did show up in your vid

@TrentsGarage

7 ай бұрын

I did, it specd out properly

What special tools ya need for this

I have a 91 that's been leaking oil out of the rear of the engine. It's been into the dealer 3X for them to attempt to repair it and it is STILL leaking! We're thinking that there must be a problem with the block because they replaced the main seal 2X, the oil pan and the ring around the main seal on the 3rd visit. I'm wondering whether the bolts that hold the ring in place aren't getting good threads in the block, so they aren't holding. I'm hoping to see how things work when you put that part together.

@nickt9467

Жыл бұрын

Check the valve cover gasket. And then check the camshaft rear seal plugs. More often that not people start with the valve cover gasket, tighten it, replace it, add gasket compound, add more, start over. The whole time the leak is just about 2 inches around the corner.

@adkisojk

Жыл бұрын

@@nickt9467 The dealer finally got the rear of the motor all sealed up but now the front side of the motor is leaking again, less than 1 year since that was worked on by another mechanic. It's back at the other mechanic and he's honoring his warranty. That other mechanic had already dealt with the valve cover gaskets; he had to re-address one side because it started leaking shortly after the first time he worked on it!

I’d like to talk to you about the 94 Toyota rebuild

Nice video 👍👍👍how much $$$ you spend to rebuild your engine l have 93 3.0L the head gasket blow now I am thinking to rebuild the whole engine

@TrentsGarage

Жыл бұрын

Around $600 or so

@adkisojk

Жыл бұрын

@@TrentsGarage Including machine shop?

@TrentsGarage

Жыл бұрын

@@adkisojk yes with machine shop work ( jet wash, honing, heads resurfaced with new valve seals, new pistons installed on connecting rods that were bead blasted, and crank and cams polished, with the master rebuild kit)

Hello dear friend. Is it possible to contact you directly? Interested in a rebuilt engine

@KWAHU93

10 ай бұрын

California? I’m in cali Oregon area

Русский?

Who can rebuild my engine 3.0 3vze

@TrentsGarage

Жыл бұрын

I'm not sure what your question is friend.

@josep.7387

Жыл бұрын

@@TrentsGarage my bad i mean who can rebuild my engine 3.0 3vze

@TrentsGarage

Жыл бұрын

@@josep.7387 if you aren't able to do it yourself I'd Google machine ships around you

@adkisojk

Жыл бұрын

I know of two places in Portland, Oregon (Oregon Engine Rebuilders and Raptor Engines) and one place just north of there (YotaShop).

@KWAHU93

10 ай бұрын

I’ll do it