Glad to see the 22R/E getting some KZread love. I've got an early RE in my '84 Celica and there is a serious lack of love on modern media compared to other engines.

Great video! Would love to see more assembly videos this clear and concise

You’re a hero. Thanks for the video and keep them coming!

Best video on the internet as I am rebuilding my first 22RE motor on my 1985 Celica GT

Thank you this info is gold to me! Just bought a celica and it was leaking bad, realized that it’s missing 3 of the big bolts that hold it the cover on! Hopefully this solves my leaking issue!

Thanks for a very timely video! No pun intended.

Thank you for the bolt information, it helped greatly

@6thGearGarage

Жыл бұрын

Glad it helped

You’re a life saver

@6thgeargarage you are the man!

Wow you really stepped your game up! Good work.

@6thGearGarage

4 ай бұрын

Thanks!

Toyota fans yes we are number one every time we drive or 4RUnner’s

Dude thank you!!

@6thGearGarage

5 ай бұрын

You bet!

Been going between a 79, 83 and 85 FSM as well as a Haynes and wasn't able to get all of this info. I have been measure holes before finding bolts as mine came pre disassembled. Thanks for making that chart.

@6thGearGarage

Жыл бұрын

Glad to help!

I swear im inside a motor that's been taken apart before. I didnt think so initially, but my four large 14MM bolts are opposite of this. Two have two washers and two have just one. Three are the same length and one is SHORTER. Really troubled bc the guides are definitely original. 84 Celica.

@williamleffler4067

28 күн бұрын

Same here! Did you figure it out?

Awesome bought an engine and truck from someone who tore it apart and didn’t want to put back together and he just threw the bolts in a big bucket.

Hey man thanks a lot for the video I'm about to put my cover back and definitely you are a life saver just one question bolt number 1 it was already missing when I started the job any idea were I can get one just got the new bolt kit from yotashop but it didn't come with it also that measure bot tool were I can get one just like that one thanks in advance

@6thGearGarage

Ай бұрын

Here's a steel ruler with inches and mm, similar to the one I was using: amzn.to/4eu7s0L and here's a thread pitch measurement gauge: amzn.to/3KPXnh0 (I have one of these mounted to the wall and use it all the time!)

Quick question! I’m doing a timing kit today and have most of the motor disassembled. I’m trying to get the crank bolt off using the bump start method. Do you know if I can bump it while the distributor shaft is removed? Thanks for your time and experience.

@6thGearGarage

Жыл бұрын

That should be fine, as there just will be no spark. I actually have a video of doing the bump start on a 22r pickup: kzread.info/dash/bejne/eXd5lbJxcaeYoqw.html

Extremely helpful! I went through your library and I see you have a breakdown of a 22r engine but not A full details rebuild. I want to do a rebuild but Most videos out ther skip a bunch of steps.

@6thGearGarage

2 жыл бұрын

I plan on doing a full rebuild one of these days... I have too many projects!

Awesome video! I do have one question tho, how are those two water pipes sealed, is there some sort of pre-made gasket? Or do you just use silicone?

@6thGearGarage

Жыл бұрын

Thanks! There is a small gasket that goes on the flange.

Hello, can you help me with the diagram of the distribution cover, which is rebol, and the screws, I no longer remember where each one of them went?

@6thGearGarage

Жыл бұрын

What engine do you have?

What's the bolt length for the AC bracket bolts that go on the bottom right? do you know?

@6thGearGarage

2 ай бұрын

Sorry, I do not know the length of those bolts.

Do the coolant pipes need a gasket or RTV?

@6thGearGarage

3 ай бұрын

Yes, either one will work.

Would you happen to know the 22RE torque specs for the chain guide and tensioner?

@6thGearGarage

3 ай бұрын

I just looked through the factory repair manual for my 1985 and it's not listed. I would guess 16 or 20 lb ft

@damiandavies4632

3 ай бұрын

@@6thGearGarage I found it. Chain Guides: 16 ft-lbs/22 N-m and Tensioner: 14 ft-lbs/19 N-m. This is only for the 22 R-E engine.

Is it possible to use the same cover for convert to dual timing Chaín, same oil and water pumps, with just replace the oil pump driver gear?

@6thGearGarage

7 ай бұрын

I've never done the conversion, but it looks like there may need to be some custom work done to the cover, maybe clearance issues? www.lceperformance.com/22R-RE-RTE-LCE-Dual-Row-Timing-Chain-Conversion-Ki-p/1015012.htm

@erasmoochoa8744

7 ай бұрын

@@6thGearGarage in some forums people say that is direct fit but I do not know, I have a friend whom has a toyotas yunkyard, I am going to compare timing covers (single and dual) and mount timing sets to see if any modification Is needed

@erasmoochoa8744

7 ай бұрын

I have just received the LCE kit and the cover has some differences against the OEM

a lot of the toque value you provided here are incorrect!

PLEASE buy a metric ruler, this whole engine is metric and inch measurements are redundant ;) Great video mate.

@6thGearGarage

Жыл бұрын

I actually have one, but most of my viewers are here in the US and US doesn't like metric for some reason. Cheers!

@dwizdofoz.

Жыл бұрын

@@6thGearGarage yeah I know, was just busting yourchops mate. They're sneaking it in over there though.

Do you have a link to download the diagram?

@6thGearGarage

Жыл бұрын

Oh I suck, forgot to put it in the description... It's there now!

@KartsAndCoffee

Жыл бұрын

@@6thGearGarage nah you’re good, thank you.

this is legit the worst part about rebuilding a 22re. what's even worse is a/c and non a/c trucks have different length timing cover bolts.

@6thGearGarage

2 жыл бұрын

And I never even knew that... good info- thanks!

@retro_88yota

2 жыл бұрын

@@6thGearGarage yep. it kinda sucks. my 22rs never did me wrong but I am really happy I opted to engine swap my pickup. no more timing chain shenanigan's

@6thGearGarage

2 жыл бұрын

Did you go 3.4?

@retro_88yota

2 жыл бұрын

@@6thGearGarage nope a 2.7L 2tr-fe from a 2015 Tacoma. I have a few (mediocre) videos covering the swap on my channel if you are curious.

He goes way too fast at grabbing bolts out and talking.

@6thGearGarage

9 ай бұрын

There's a chart you can download in the description... Or you can slow the playback speed on the YT player if you're watching while trying to reassemble your 22RE ;)