Touchless 1 & 2 - NEW Non-Hazmat 2-Step truck wash soaps!! 2021
Тәжірибелік нұсқаулар және стиль
GET IT HERE! touchless.washproduct.com
Introducing our brand new 2-step touchless wash soaps! Non-hazmat soaps that can be shipped SAFELY & LEGALLY directly to your door with standard shipping carriers. The perfect solution for a quick maintenance wash between normal brush washes. Touchless 1 & 2 are concentrates, so a little bit goes a long way!
Main Benefits:
Neutralizes salt/grime to protect your paint job
Safe on all vehicle surfaces (Including polished aluminum/chrome)
Fast/Easy/Effective maintenance wash
Gets surfaces 80-90% clean (On par with competitors Hazmat soaps)
Works with foam cannons or foam lance systems
How To 2-Step:
Cost breakdown:
90 for 1 gallon of each
1 gallon fills 12.5 foam cannons
1 foam cannon = $7.2 to fill up
If you use a whole foam cannon it costs you $7.20 for your wash + time
If you use half a foam cannon it cost you $3.60 to wash + time.
- Saving time not waiting in line at truck wash
- Saving time and money not going out of your way to a truck wash
-Saving time not pulling out bucket and brush
- Can wash a cab with a sleeper in 35 minutes.
(Optional Step) For extra cleaning power, pre-soak your surface with Bug Remover to help cut through extra road film.
Dilute in foam cannon - 1 part soap to 3 parts water
Apply soaps from bottom up
Foam Touchless 1 onto your surface
Foam Touchless 2 overtop of Touchless 1
High pressure rinse entire surface. Keep wand 6-12" away while maintaining a 90 degree contact angle with your surface.
Rinse thoroughly from top to bottom
What to expect from any 2-step:
Touchless/Brushless soaps, whether it's our product or a competitors, do not get your surface 100% clean. We tested a top competitor's 2-step soaps alongside ours and determined both leave about 10% road film that you can only see up close when you run your finger through it. This is expected behavior for 2-step in general. These types of products are meant to be used for maintenance washes between your normal brush/mitt wash. They are not meant to completely replace washing with a brush/mitt.
Our recommended weekly wash process:
Detailed Wash - We use our full prep/wash/protect process once per week. Start with bug remover to pre-soak bug remains and heavy road grime. Then we foam on some Platinum Wash soap and scrub the surface clean. After scrubbing, rinse thoroughly. Once the surface is 100% cleaned, we apply a coating of Invisishield (our foam on wax replacement) & rinse off.
2-Step
Between detailed washes, we use Touchless 1 & 2 to neutralize road salt/grime and help keep the surface clean and free of extra build up.
Пікірлер: 124
Looking forward to using your products!!
i like how you dryed that truck. good work.
@ImageWashProducts
3 жыл бұрын
Thank you sir! We've been washing trucks a loooooong time.
Beautiful garage nice and clean
@ImageWashProducts
2 жыл бұрын
Thanks a lot Don!
can it remove diesel residue on tanks and oil leaks residue from engine and u undercarriage or i need to use degreaser before ?
I actually vibe wit the music , like 80s 🔥🔥 W vid
@ImageWashProducts
11 ай бұрын
Track is 🔥
will this work on 3600 psi 2.5 gpm machine?
How many gallons would you use just for a semi truck and trailer? Trying to decide how big a tank I need for just my personal
How much do you put in each foam cannon? How many ounces per?
Great video. I want to get into fleet washing here in Laredo tx. Really want to make a living from it. Do u you really need hot water? My 9-5 doesn't cut it anymore any advice? Or pointers? Thank u.
@ImageWashProducts
2 жыл бұрын
Hey there! We actually recommend using cold water, so no worries there! Best advice would be to watch the tutorial videos, practice on your own equipment, and make sure you get your soap dilutions dialed in so they clean the way you want them to. We also offer full pressure washer setups with multi-soap injectors if you're looking for help getting setup. Checkout b2b.washproduct.com to link up with us. 👌
ordered some to try. Will be downstreaming what size injector should i use? 10-1, 20-1, 30-1 or higher?
@ImageWashProducts
2 жыл бұрын
Awesome! Thanks for the support. You're going to want to shoot for about 75-1 when downstreaming. Hit us up if you have any other questions or issues along the way. Happy to help!
Do you rinse the truck down before applying step 1 or just apply dry?
@ImageWashProducts
3 жыл бұрын
Hey John! When dealing with normal amounts of dirt/grime, you can apply it straight on while the truck is dry. If you have really heavy chunks of buildup, you'll likely want to pre-rinse those heavy hit areas before you begin to soap it up. If it's really bad, we recommend using a pre-soak like a degreaser or bug remover to loosen large debris/bugs before beginning.
@johnweber8562
3 жыл бұрын
Great. Just used it for the first time this weekend. Works great! It’s just what I wanted!!
Can i use this foam cannon technique on a 4gpm pressure washer?
@ImageWashProducts
2 жыл бұрын
Yes, most definitely!
Do i apply #1 rinse then #2 then rinse OR #1 & #2 then rinse. Gonna try it out today. Lmk. Ty
@ImageWashProducts
9 ай бұрын
For Touchless you would apply step 1, apply step 2 right over top, allow a bit of dwell time, then complete the process by rinsing surface according to our instructions. Find the complete instructions and more information here: washproduct.com/collections/touchless-1-2-the-1-frictionless-wash-for-cars-trucks/products/touchless-1-2
How long do you let it sit once you foam it on
@ImageWashProducts
3 жыл бұрын
By the time you get done foaming both steps on, you can start rinsing where you started foaming. The longer you let 1&2 sit on before rinsing, the more it will clean. I would say at least 30 seconds of having both of them on your surface.
Me interesa saber el precio de los productos y como los contacto
@ImageWashProducts
3 жыл бұрын
Products are available to order on washproduct.com as long as you're somewhere in the United States or Canada.
Question. I wash trailers out in the sun. Would this have negative effects on the results?
@ImageWashProducts
Жыл бұрын
Hey Vinicio! Happy to help here. As with any soap, you just want to make sure it doesn't dry before you have a chance to rinse. If you have to wash in the sun, we recommend washing in smaller sections. If you notice areas starting to dry, mist some water onto those areas to keep the surface wet. If soap is allowed to dry on the surface, it's not going to harm anything, but you'll definitely be able to see the dried soap residue. With Touchless soaps, proper rinsing is crucial.
Can you use a shammy or drying cloth with this product
@ImageWashProducts
2 жыл бұрын
Touchless will leave your ride 90% clean, so ideally you will want to dry with a blower or use DI water to avoid water spots and rubbing the 10% dirt/grime into your paint.
We're can I buy this product I like it a lot and foam guns too
@ImageWashProducts
2 жыл бұрын
Hey there! Thanks for checking us out. You can get it on our website at the link here: washproduct.com/products/touchless-1-2 Or if you prefer, you can also purchase it on Amazon.
Is heat required or can i just use a pressure washer
@ImageWashProducts
11 ай бұрын
You can use warm water up to 120 degrees and get great results. Anything higher than that risks breaking down the chemical make up of the chemicals reducing the cleaning power.
Was the roof cleaned too ? What does this service cost ?
@ImageWashProducts
3 жыл бұрын
Hey there Chris! This isn't a service, we sell the actual soaps so you can do it yourself at home. If you'd like to order, check out touchless.washproduct.com
do you guys do shipping to canada? If not are there any stores
@ImageWashProducts
11 ай бұрын
We were shipping to Canada for some time but due to the logistical challenges brought forth for a number of reasons we had to stop international shipping until further notice. Stay tuned to our socials for any changes to this policy.
Can I use this on a camper? Like does it deteriorate silicone? Or is it safe?
@ImageWashProducts
2 жыл бұрын
It's safe on silicone. However we generally try to stay away from pressure washing campers. Some of them have delicate seals and other intricate parts you want to keep high pressure away from. But if you're comfortable pressure washing your camper, have at it! The chemicals won't harm anything on the camper.
@deez9995
2 жыл бұрын
@@ImageWashProducts thank you soo much for the info!
Can these 2 products be used in direct sunlight ?
@ImageWashProducts
2 жыл бұрын
They can, but we don't recommend using any chemical in direct sunlight. If you absolutely have to, make sure to wash in small sections and rinse completely before moving onto the next section.
On average how many foam cannon tanks worth do you go through on one truck. Of each cleaner
@ImageWashProducts
11 ай бұрын
Check out the page I sent you (link below). Expand the section labeled "cost breakdown".
I wonder is this works on greasy and icy trucks
@ImageWashProducts
3 жыл бұрын
If there's really heavy grease buildup, you'll want to use our degreaser a pre-soak before using the 2step.
What about the roof of the tractor / sleeper?
@ImageWashProducts
Жыл бұрын
Hey Thomas to keep our videos short and sweet we often do not show the entire detailed process we follow everyday in our polish and detail shop here in Michigan but for your peace of mind we do indeed always make sure to get the roof. 😎👍🏽
What psi specs for a pressure washer and what gpm would you recommend for semi-truck or car washing purposes with your chemicals and foam cannons?
@ImageWashProducts
3 жыл бұрын
Thanks for checking us out! We've tested our foam cannons as low as 1700 PSI/1.7GPM, but rated to work with at least 1.5GPM.
@PhD_JC
3 жыл бұрын
@@ImageWashProducts thanks for the reply. Do you have any products for cleaning or brightening the aluminum tanks or boxes on a semi-truck?
@melesiaguy2976
3 жыл бұрын
@@PhD_JC you can use aluminum acid .for steelless or chrome use 503 acid. I do truck wash too
@franciscosanches8375
Жыл бұрын
@@melesiaguy2976 any way I can contact you ?
can this be used in direct sun?
@ImageWashProducts
3 жыл бұрын
We would highly advise against using any soap in direct sunlight if at all possible. If you have no choice, then we would suggest working in small sections to avoid the soap drying on the surface.
Can I use this on regular cars ?
@ImageWashProducts
2 жыл бұрын
Absolutely!
Does this remove ceramic coating??
@ImageWashProducts
11 ай бұрын
No this is actually better to use than a brush soap. The brushing wares away any protective coating over time.
Does this work on a really really dirty muddy truck ?
@ImageWashProducts
11 ай бұрын
It can if your vehicle has some sort of protective coating like Wax Replacement or ceramic. Or if you use a pre-rinse like degreaser to dislodge the large chunks.
Do you use hard water
@ImageWashProducts
11 ай бұрын
You can use hard or soft water. The water we have hooked up in our wash bay is hard water.
Is it safe 0n commercial vans?
@ImageWashProducts
2 жыл бұрын
sure is!
What is the price for a truck wash like that.
@ImageWashProducts
2 жыл бұрын
all pricing and other information can be found here: washproduct.com/products/touchless-1-2
Where did you buy the wand??? What model is it? Thank you in advance!!!
@ImageWashProducts
3 жыл бұрын
We custom build them using Suttner parts. 😎 We no longer sell them on our website, but if you'd like one custom made, feel free to shoot us a message at help@washproduct.com
@jaimecantu5387
3 жыл бұрын
@@ImageWashProducts Thank you!
Wished you would have shown the full fenders better they looked extremely stripped from the brief shit at end of video. Otherwise looks nice
@ImageWashProducts
2 жыл бұрын
We have another video where we do a full walk around and show every spot we missed and everything. Check our channel for the video titled "Polish Safe 2-Step Touchless Truck Wash - w/Detailed Walk Around"
You have a video of you actually cleaning a dirty truck?
@ImageWashProducts
2 жыл бұрын
Check this video out 👉🏽 kzread.info/dash/bejne/qYSIrdChepyzqaQ.html Let us know if that is dirty enough for ya.
Absolutely no harm or streaking on Polished aluminum?!
@ImageWashProducts
3 жыл бұрын
That's correct! There's another video on our channel that shows us dumping the straight acid (Touchless 1) right onto some polished aluminum to really show how safe it is. Here's the link. kzread.info/dash/bejne/X4x9spaTYq7VfJc.html
Same nerta?.I'm buy nerta and loose my money!! recomend using brush
@ImageWashProducts
3 жыл бұрын
Not the same as Nerta. Brush will always yield better results. This is simply a great polish safe, non-hazmat maintenance wash. 👌
@cowcheese1983
3 жыл бұрын
Really? I've been using Nerta and i've gotten amazing results. I'm certain Non-Hazmat is just a good too. I'll be giving them a try also as i own detail shops and i love keeping up with the chemical technologies on offer.
@rafaelquilmes
3 жыл бұрын
@@cowcheese1983 really? Ok I'm selling 5 gallons for half price!!
@cowcheese1983
3 жыл бұрын
@@rafaelquilmes lol i already have 50 gallons i just ordered bud but if you still got when i running low, i'll hit you up.
@rafaelquilmes
3 жыл бұрын
@@cowcheese1983 nerta say not need brushing!! Lie lie lie!! But you support nerta good for you! I prefer to be honest.
Loose the music. It does nothing but annoy. To loud .
@ImageWashProducts
3 жыл бұрын
Hit the mute button. Easy solution. :)
@luissantos9227
3 жыл бұрын
Lol 🤣
@eduardoromero4064
Жыл бұрын
mute it and move on!
@TropTrevTv
Жыл бұрын
@@ImageWashProducts 😂😂😂
What’s the ph of these products?
@ImageWashProducts
2 жыл бұрын
Step 1 is around 2-3 pH, step 2 is around 11-12 pH. When used correctly together, the end resulting pH is neutral.
@DetailingBreakdown
2 жыл бұрын
@@ImageWashProducts great, I figured something like that. Ty
@ImageWashProducts
2 жыл бұрын
@@DetailingBreakdown Any time!
@ImageWashProducts
2 жыл бұрын
@@DetailingBreakdown Also, use code NOTOUCH15 right now to save 15% off. If you end up making a video, shoot us a link! We'd love to share it around on our socials. Cheers!
@DetailingBreakdown
2 жыл бұрын
@@ImageWashProducts I appreciate that. I don’t detail semi trucks. If this works on regular cars and won’t ruin plastic trim I’d be happy to make a video of your products. They are very interesting.
And India cost
@ImageWashProducts
3 жыл бұрын
Thanks for your interest in our products. At this time, do we not ship to India.
@sarjeetsinghbishnoi1719
2 жыл бұрын
@@ImageWashProducts sir plz sand india
Wash from the bottom up
@ImageWashProducts
2 жыл бұрын
That's the great thing about being American. You're free to wash your own truck however you'd like.
@markkropf8295
2 жыл бұрын
@@ImageWashProducts absolutely but some methods are helpful in achieving a better more consistent job.
your truck is already clean lol
@ImageWashProducts
11 ай бұрын
Touchless 1 & 2 are for maintenance washing. If you have heavy dirt/grime that hasn't been washed off in weeks then we would recommend using our brush soap (Platinum Wash). Then to maintain the clean surface you would use T1/T2 every week or so depending on how often you drive the vehicle and of course the conditions it is being driven in. #knowledgeispower
@patrickdaigneault5795
11 ай бұрын
ok@@ImageWashProducts
That truck wasn't really dirty
@ImageWashProducts
11 ай бұрын
Touchless 1 & 2 are for maintenance washing. If you have heavy dirt/grime that hasn't been washed off in weeks then we would recommend using our brush soap (Platinum Wash). Then to maintain the clean surface you would use T1/T2 every week or so depending on how often you drive the vehicle and of course the conditions it is being driven in. #knowledgeispower
I dunno that truck is cleaner than any truck i have ever washed by far.. i meam its just dusty
@ImageWashProducts
2 жыл бұрын
*salty
Rubbing his finger in the dirt on black real smart!
@ImageWashProducts
3 жыл бұрын
haha yeah. Thankfully we're a polish and detail shop, so we just buff out any scratches during shoots like this. Had to prove a point that it was dirty. There's always going to be someone who wants to nit pick the little things, so we have to make it very clear it was dirty before we started. :)
@samcrawford3281
2 жыл бұрын
It's not a Ferrari 250 GTO. It's was a demo video.
Washing your truck to 70s porn music.
If you guys want touchless soap, Hydro Chemical Systems, that’s real chemical
@ImageWashProducts
2 жыл бұрын
😂😂😂😂 Hard pass.
@eyubmusayev922
2 жыл бұрын
Sorry, it’s called Hydro Tech System ☺️
Try on a dirty truck
@ImageWashProducts
Жыл бұрын
Check out the other videos on the channel. ;)
It’s funny watching these videos people saying this is 2 stepping 😂 if you brought that to do fleet washing they would probably cancel the contract looking like a fool out there get proper chemicals go to Hydrochem and get their 2step gun and hoses and do it right
@ImageWashProducts
2 жыл бұрын
It's funny reading these comments from people saying that x company is better than y company when they aren't even comparing apples to apples. 😉 We have professional grade systems and more aggressive chems for fleet washers, truck washes, and serious wash bays. These soaps (Touchless 1 & 2) are the non-hazmat retail version of 2step chems that are simple enough for anyone to use. There is a reason why people are switching from our competitors to our systems every day. At the end of the day, use what you like and what works best for you. Cheers.
A copy of chemX lol
@ImageWashProducts
2 жыл бұрын
LOL