Just finished replacing the solenoid on my toro. Works like a charm! Thanks for sharing your video Helped me a ton!

@kbltexmex

Жыл бұрын

Glad it helped

I love how you made it work even when it wasn't exactly the same. You are right about keeping all nuts and bolts and washers.

Thank you so much for posting such a detailed video. Like most people commenting, I've been searching for a basic walkthrough of how to debug this problem... Couldn't find anything from anyone. I appreciate you taking the time to do this. This is my project for the morning!

@kbltexmex

2 жыл бұрын

Thank you I’m glad I could help

Thank you so much for the detail! I found so many videos that JUST showed one part or the other - not tracing each part of the process.

My lawn mower would not start . After watching this video, I ordered and installed the solenoid. The only issue I had was getting a plastic cap off of the top of the original solenoid was a little challenging, but I got it off. You saved me a lot of headache and frustration!! Thank You so much!!

Man, I thank God for you making this video, it solved my problem. Now I don't feel defeated!

Your video was extremely helpful, thank you!

Omg I am so thankful for you. Single woman juat fixed her mower because of your video!

Was able to mow my lawn yesterday before a party because of you. You saved me. Thank you! Solenoid on order and will fix shortly. Well made video. Love the mustache. haha

You made my day much easier, and much appreciation!!

Thank you for the direct and no nonsense instructions! We'll done.

Excellent instructional video. Exactly my issue. solenoid ordered.

Excellent instructional video. Thank you!

Excellent Video; Extremely Resourceful in diagnosis of my Mower !!!

Great straight forward common sense. 💪 Fixed it with testing just like you said!

Great job! Love a job well done especially when done at home!

Thanks for making this video! I had run through a field after doing the yard with a lot of brush in it and had a bunch of brush wrapped up throughout the mower when I finished... So, I pulled the brush out and rinsed off the mower. Trying to start it up to put it away and nothing. My first thought was I got the switch wet. But, that thing has sat in the rain before and not had an issue. The first part of your video was what solved my problem. I started checking connections. The brush from the field did a number on my connections. I feel stupid and relieved at the same time! Thank you!!!

@kbltexmex

2 жыл бұрын

I’m glad it worked out for you thanks for watching

@joseleonzo1885

Жыл бұрын

@@kbltexmex b gb bvvcvh aaa tea teaches a Sy5dwa5a a a

Buddy you just saved me a headache LOL ! Thanks ! Can't wait till daylight to get working on mine . You made it look easy . I've got one just like yours . You helped me out a lot . Thank you sir .

Great video. Fixing mine tomorrow!

Good video buddy. I figured this was my problem you just helped me confirm. Your video was the right amount of explanation. Some of these guys put videos out and just love,love,love to talk. What I like to do before I remove any wires is to take a few clear photos that I can refer back to to ensure proper replacement of color wiring. GOOD JOB Sir!

@hickerbilly138

2 жыл бұрын

I got really confused at 5:10 my celenoid isn’t sparking battery good so is it the celenoid or starter

Thanks for the video you helped me fix my toro💪🏾👍🏽🙏🏽

Great job, easy to understand, Thank You.

Thank you for the video. I'll visit you again next time.🍀

Nice job!! I always feel a great sense of accomplishment just being able to identify the problem!

@kbltexmex

2 жыл бұрын

Thank you

Thanks for the video, it saved me some money.

Thank you for helping! I fix my Toro by myself thanks to you

@kbltexmex

Жыл бұрын

Glad I could help

Hey there ! New battlers? I need to cut my grass to but I have no ride . Just can’t aford one . Have a good week. Good to see your all safe

Thanks Sr. I just replaced the solenoid to my zer turn and it worked.

@kbltexmex

2 жыл бұрын

Glad to hear that, thanks for watching

Excellent instructional video!

thank you so much!! your video is a blessing!

Thank you for posting this "excellent" video....great job....thanks for sharing!!!👍🏼👍🏼👍🏼👏👌

You're a lifesaver! It ended up being both the starter and the solenoid for me 😂

@kbltexmex

Жыл бұрын

Glad it worked out for you

Hello, Your guidance was very good as you slowly go step by step in this process which I find more informative than other videos,I have a Toro zero turn and now I know what I will do to hopefully test my solenoid if that's the problem thanks... And it was!.

@mcsmith7606

2 жыл бұрын

This man learned by doing and not theory. His test on solenoid was meaningless because all he did was by pass the solenoid. If the solenoid was good and the control arm switches were bad or if the PTO switch was bad a new solenoid wouldn't fix it. To test the solenoid you apply power to pole that receives the lead from the starter switch. When you disconnect a battery you disconnect the ground first, When you connect the battery you do the ground last

@jamessommer6077

2 жыл бұрын

@@mcsmith7606,it was a helpful video.

Great job! Support and best regards from Poland :)

Thanks man. This really helped

Thank you for the video. You solved my problem!

@kbltexmex

Ай бұрын

Thanks for watching

So helpful, thanks!!!!!!

I am pretty sure that is whats wrong with mine. I might just clean my nuts and terminals with a wire brush and it will make contact. Sometimes you can hit the solenoid with a hammer and it will start working. Thanks for the video.

That was a great video!

Nice video. Thank you for sharing it.

@kbltexmex

Жыл бұрын

Thanks for watching!

awesome. thanks for sharing

Good Job! Thank you

Great video

This was a great video and I’m glad you made it. I think the only way to make this better is if I was the main star in the video lol.

God bless you brother good video

@kbltexmex

Жыл бұрын

I appreciate it

Thank you... video was done.

Thank you💪❤

Good video,. Question for you to start it, did you disable the seat shut-off ?

This sis weekly recurring problem for me .Do you know how to bypass the solenoid. ? Thanks Cliff

THAT DIDN'T SOUND TOO GOOD ON INITIAL START UP. SOUNDED LIKE LIKE A SLIGHTLY LOW BATTERY TO ME

Gracias amigo

What size nut did you need since the old ones didnt fit?

Thank you very much Sir!

So I could turn it on using a screw driver but just to turn on once I will have to replace the solenoid then thanks

Try holding the micro switches down then let them pop up hard like a car door lite switch fixed mine

Awesome

What is the black box next to the solenoid? Could that be a problem for it not to crank? My mower sounds like it wants to crank but it just clicks a lot. I tried to bypass it with the screwdriver but I just hear it clicking a lot in the box.

Hi there. This is very helpful. My SS5000 has something weird. I use the mower. After using it a while the engine shut off but the starter stayed on. Then it would not turn off even when key in off position and taken out. I am not sure if it would be the solenoid or the ignition switch. Any suggestions?

@kbltexmex

2 жыл бұрын

I would bet ignition switch

When you used your screwdriver to test the solenoid connection, did you have to crank the key or did touching the two do it? I ask because there wools be no way for me to test otherwise if I’m not sitting on the seats safety switch.

@kbltexmex

10 ай бұрын

Just turned key to the on position

So I was getting the click noise yesterday, but if I messed with the key I could find a sweet spot that would start up the mower, but as soon as I tried to engage the arms the engine would start cutting out. Same would happen if I engaged the PTO

@kbltexmex

Жыл бұрын

Check fuel filter and fuel system sounds like it’s being starved of fuel. It lets enough pass to start but not enough to function

Thank you, my freaking wire had came off

Do you have videos replacing the starter or safety switches?

@kbltexmex

Жыл бұрын

Sorry I do not

Will you help an old veteran? Bought Titan Model # 75302 406712152 last year. From day one, when I started it, it missed a little then ran OK. It died. It will start back up & run for 4 second then run so badly you know it will dye. When I operate the coke, it makes no difference. It smokes white/blue fumes as if it is getting to much gas. What should I check 1st ? Your help will be greatly appreciated.

Napa sells the correct solenoid for $15.50 and it comes with nuts. Part #SME 7018601

Can anybody tell me what’s that black box piece next to the solenoid? Mine won’t stop whining making noise even when off and my mower won’t start

How did you know it is not the safety switches? The tech from Toro said it could be the safety switches.

@kbltexmex

3 жыл бұрын

I tested the solenoid to verify!

Hey man thanks for making this video. I have a smiliar issue for my Toro SW 500 (Timecutter). I'm not the first owner but it will turn but not crank and I put a new battery in it today. Yesterday I got it to start twice and mowed a little. But it seems like dumb luck when it does. I did that solenoid test and just had a small volcano of sparks but no start. Everything was tight. You have any idea what else it might could be? I'd appreciate any insight I'd you have the time.

@kbltexmex

2 жыл бұрын

Did it turn over the engine at all when you checked the solenoid? If so I would check fuel system next, fuel filter, hoses, fuel pump

@andrewgraves6778

2 жыл бұрын

The same thing happened to me..everything tight, battery fully charged, checked the solenoid like you did and it only sparked..engine did not act like it was trying to start at all..any ideas?

@WolfKnifeLaserTorch8

2 жыл бұрын

@@andrewgraves6778 for me it was more the placement of the foot pedal once my battery was fully charged.

@kbltexmex

2 жыл бұрын

Maybe starter, try jumping the starter direct to see if it starts

@andrewgraves6778

2 жыл бұрын

I actually just bought a new battery for it..did a little research and the cca195 battery that came stock with it was pretty underpowered..I ended up getting a new battery for it with cca340 and it’s started right up every time so far..I guess we will see if that continues to be the case 🤞

How did you start the mower with the seat up?

@ronknight9974

2 жыл бұрын

The seat switch is only for the pto on/off

That is a bad ass mustache.

Question my mower sparked the hydros and engine started turning when I did the screwdriver thing but never came on is it still the solenoid you think?

@kbltexmex

2 жыл бұрын

It’s possible and cheap enough. I would start there but sounds like it maybe in conjunction with another problem too

@Lifewithtwill

2 жыл бұрын

@@kbltexmex ok thank you will let you know how it goes

@Lifewithtwill

2 жыл бұрын

Got it changed out still won’t crank 🤦🏾‍♂️! I got a feeling it’s something easy in my face I’m missing going to mess with it tomorrow some more if I can’t get it then to the shop it goes

@kbltexmex

2 жыл бұрын

Sorry to here that. Is it turning over but just won’t start? If this is the case try starter fluid in the air intake or some sort of combustible to see if that helps.

@Lifewithtwill

2 жыл бұрын

@@kbltexmex ok yeah when I turn the key I get the click that’s all won’t turn over until I did the screwdriver thing

So my starter solenoid sparks but will not turn the zero turn on. it does crank though. Any ideas?

@kbltexmex

2 жыл бұрын

If you haven’t started it in a while and it’s turning over but won’t start make sure you choke is is half throttle. Open the intake and remove the filter then spray in some starter fluid and try starting.

hey man have you ever worked on a fx801v? was working fine and then just wont start anymore??

@kbltexmex

2 жыл бұрын

Start with the small things first, check engine oil level sometimes they have low oil switches to prevent damaging engine. Check spark plugs they can work loose. Check fuel valve is open. Check battery. If all is good spray some starter fluid into intake and try starting

@817mario

2 жыл бұрын

@@kbltexmex I had literally just replaced the oil that day. It just clicks when I turn key now. You think maybe starter ?

@kbltexmex

2 жыл бұрын

Could be, I would try jumping it straight to the starter and see if it starts. If not good possibility it’s the starter

@817mario

2 жыл бұрын

@@kbltexmex I jumped the battery man and it turned right on but for some reason after I turn off it will do the same thing. Battery voltage doesn’t drip tho so I dont know what’s going on. But If I jump it again starts right up

Bingo lol thanks big dog .

Were can I buy one

@kbltexmex

3 жыл бұрын

I bought mine at tractor supply but any local small place with small engine parts will carry them

why didn't you disconnect neg to the battery?

@dispatchcenter5515

3 жыл бұрын

As long as you disconnect either the positive or the negative you are okay. Usually people disconnect the negative first to prevent arcing. But as long as you pay attention to what you're doing you don't have to worry about it.

@itsurboiijr6961

3 жыл бұрын

@@dispatchcenter5515 if I just do it with a screw driver like the guy did in the video without disconnecting any positive or negative will I get shocked even tho I have a insulated screw driver ?

@kbltexmex

2 жыл бұрын

@@itsurboiijr6961 no you will not get shocked

My bolt or nut would fall into mower or under mower and I spend an hour trying to find it. It’s ok I’m used to shit not working for me.

we've had this about a month now and there are no complaints. kzread.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend some of the decals are a little crooked; i guess the decal guy was having an off day. it came on a crate and took about 30 minutes to assemble, then about another 30 to install the bagger. it works great and i cannot foresee any big problems coming up. it is a sturdy, usa built product. update: the belt-drive clutch is still grabby, but i guess that is the nature of the device. as the literature advises be very careful on slopes or uneven surfaces-it can be very tippy.

Where are you located

@kbltexmex

2 жыл бұрын

Southeast Texas

So if it's not the solenoid switch what is it

@kbltexmex

2 жыл бұрын

Assuming that you already tested and ruled out the batter, I would test the starter. Hook up some jumper cables black to the battery black and red directly to the starter. Starter should try to turn over the engine.

When I touch both with screwdriver it doesn't do anything

@kbltexmex

Жыл бұрын

Make sure the key is in the on position, if still nothing I would check your battery and wires.

how much are they ????????

@kbltexmex

3 жыл бұрын

It ran me about 10 bucks

Mine still didn’t start. I even bought a new battery.

So what if the solenoid is good and it doesn’t crank, just clicks when you turn the key. Bad starter maybe?

@kbltexmex

9 ай бұрын

Then try putting power directly to the starter and see if it turns over

@kbltexmex

9 ай бұрын

If nothing happens then get your starter check at a local auto store they can tell you if it’s good or bad.

@kbltexmex

9 ай бұрын

If starter checks out good it could be your ignition is bad or a loose wire from the ignition to the solenoid

@3ngi_n33r

9 ай бұрын

@@kbltexmex thank you 👍

I replaced the solenoid and mine still don't start, I hear a loud noise that sounds like it's coming from the starter, the starter is good because I jumped from the battery to the starter and it turned over, so now I'm puzzled does anybody have any ideas?

@kbltexmex

2 жыл бұрын

It may be a bad ignition switch, check the wires make sure there isn’t anything loose. If nothing is loose the ignition switch may be bad.

@daviddrain421

2 жыл бұрын

@@kbltexmex I already replaced the ignition switch because when I went to pull the plug off and check it it fell apart and broke, the fuses at the switch are good I did a continuity check on them, I'm still looking but I think it might be something with a ground wire.

@kbltexmex

2 жыл бұрын

Also make sure the wires didn’t get crossed on the solenoid. I know initially I crossed my secondary wires and would get nothing when engaging ignition.

Crossed over the solenoid mower turns over still does not crank the key switch does not work what is going on with my mower

@kbltexmex

2 жыл бұрын

Try starter fluid in the intake then crank see if it will fire up

@richardhughes3254

2 жыл бұрын

Did the starter fluid still did not crank

@kbltexmex

2 жыл бұрын

Check the battery if you haven’t already it may be worn down and not have enough juice to start the mower.

@richardhughes3254

2 жыл бұрын

Fully charged the motor turns over like it wonts to crank but wont fire off and run

@kbltexmex

2 жыл бұрын

Make sure the unit is in park and that the key is in the on position. May have to disconnect the safety feature under the seat if you have it lifted up while working on it.

What happened if it doesnt click

@kbltexmex

2 жыл бұрын

If it doesn’t click, it could still be the solenoid, try jumping the solenoid with a screwdriver. If nothing happens check the batter and cables. Then have your starter checked.

@blackhouse7646

2 жыл бұрын

@@kbltexmex thanks, should i check the key switch too?

@kbltexmex

2 жыл бұрын

If all else fails yes the ignition switch would be the next thing

I change my solenoid and mine still didn’t start

@kbltexmex

3 жыл бұрын

Sorry to here that, next line of business will be to check you battery make sure it is holding charge, then check the wires sometimes they get crossed, then next would be to check the starter.

@michealguesshe9655

3 жыл бұрын

Same problem i put a new battery new solinoid and new ignition still only clicks but i can bypass solinoid and starts right up

I'm guessing my solenoid is good cause my lawn mower is still making a clicking noise

@kbltexmex

2 жыл бұрын

Yes sounds like it, check your starter next. If you pull it off a local auto parts store can test it.

You need to go get the right solenoid. Your fittings are all wrong

hey pal i cant help but notice you literally have the wrong part and forced the connections breaking the metal crimp in the process... my twitch viewers will be hearing about this. (i left a dislike) please use the correct size parts in the future.

@kbltexmex

Ай бұрын

Thank you!