√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@blkhemi3925

2 жыл бұрын

Need help! 2003 GMC Sierra SLT 2 wheel drive 200,000+ miles Crank but no start. Replaced fuel pump Throttle body Idle position sensor AGR valve Map Sensor. I have fuel and fire. 2 weeks ago I started it, drove it out the drive way, got about half a mile down the road, when it started idling really high, then bogging out, and finally died. I got it started, but it wouldn't go over 5 mph. I got it parked, now it won't start.

@Ryan_1997

2 жыл бұрын

@@blkhemi3925 Did you ever get it goin? Tps? Cps? Oil pump?? Give us an update

@robinmarsh5575

Жыл бұрын

What would make my truck feel like something is sticking whengoing forward

@robinmarsh5575

Жыл бұрын

​@@Ryan_1997 What would make my truck feel like something is sticking while going forward?

@terrysnyder6856

Жыл бұрын

I only have low gear whatnot

1999 Sierra 382,000 miles. One water pump, one alternator, one fuel pump, and a power steering pump. I live in the south, no rust. These are very dependable trucks. I pull a camper or boat all the time.

@giannimagdalen9301

2 жыл бұрын

Do you still have it? Mine has 208,000 miles runs fine

@MrHuck

2 жыл бұрын

Guess my 99 is a baby with 133k so far. Did water pump year ago and rear calipers. Other then that good. Well do have an actuator need replacing for ac but just living with it for now.

@brienfoaboutanything9037

2 жыл бұрын

Thats amazing information about GMC (automobile): kzread.info/dash/bejne/g22sq5OMgdicnqg.html

@yorksta86

2 жыл бұрын

06 with 428k on the 4.8 iron block. Rear main seal done and valve covers.

@lloydbrian9342

2 жыл бұрын

Just bought one with 133,000 for 7, let’s get it

I just bought my step dad's 2006 with 160,000 miles on it. I'm so glad to see people are getting extravagant miles. Paid $3,500.

@brettcarlow5779

2 жыл бұрын

wow that’s a steal, im looking at one this weekend an 05 with 125k miles for 10k

@kylerc1284

Жыл бұрын

Mines got shy of 380,000 miles on it and the fuel pumps just going out and ac clutch compressor is messed up, other than that Its chilling

you missed the absolute #1 problem with these trucks up north- brake lines. they sit on top of the frame and snow and salt builds up on them and eats them away real quick. thanks for posting

@1AAuto

3 жыл бұрын

+L Rad Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@mjb12141963

3 жыл бұрын

When they start rusting just replace the brake lines all at once and you wont need to worry about them. It's a bit of work but it's not rocket science and it's not as expensive as you might think compared to replacing a foot or two at a time. I live in NE Ohio and drive an '04 GMC.

@ibrahimkhan-od7ff

3 жыл бұрын

@@1AAuto you still didn't answer his question tho ?

@mrfrank5757

3 жыл бұрын

I had the same problem with my 2005 GMC Sierra. Replacing all brake lines with new stainless steel lines without a lift was worthwhile but tedious. Rusted rocker panels are also a common Non-mechanical problem.

@shaffer4220

3 жыл бұрын

I had that issue. A shop wanted $2,500 to replace all the lines! I said they were crazy. They said they would have to bend each line. (I actually have experience in that trade in Aerospace). Instead, for $68 I bought Genuine GM OEM lines online and found a shop to replace all lines for $500. I was happy, and yes I could have done the job but had remodeling going on....

2003 GMC Sierra, gone through about three fuel pumps and three wheel bearings in the past 100,000 miles, from 80k to 180k. Compared to buying a new vehicle, these were inexpensive repairs. I can't get rid of the truck, it still looks beautiful to me and it's hard to find a long bed truck anymore. No rust, Rhino liner bed and tonneau cover to boot

Have had a 2000 Sierra for over 20 years and 180k miles and had none of these problems. Only part that has failed is the fuel pump at 125k, that’s it! Have meticulously maintained this truck, and it has been the most reliable vehicle I have ever owned.

@Vehement_poet

Жыл бұрын

I loved my 2000 GMC Sierra it had 250k and would’ve ran another 100k with proper maintenance if a certain person would’ve paid attention to there stop sign and not T boned my truck:/ But I have a 2005 now and like it.

@darkh3lmet82

Жыл бұрын

@@Vehement_poet I have a 2000 gmc sierra still and it has 318k miles on it. Only one of these problems in this video have happened and that's the wheel bearing. Only the passenger side. My dad owned it brand new from 2000 to 2005 and then I bought it from him and have had it ever since. Currently working on completely restoring it rather than buying a new or even a new/used truck with the prices these days. It's mostly still in great shape, but I'm going to customize it and make it like new again as much as I can. Wil eventually do an engine swap, but for now, it runs great other than a slight oil pressure issue. Only big job I've ever had to do on it was replace the transfer case. Transmission is still original. Have had many people randomly ask to buy my truck over the years and I always turn them down. I'll never get rid of her...best damn truck on the planet!

The last truck I ever owned was a 1997 gmc sierra 1500 and I put a 6 inch suspension lift kit on that truck and I loved it !!!! 😁😁😁😁❤❤❤❤

Thank you everyone at 1A Auto for all the informative content you post to help us, have a great 2021, stay safe, stay healthy. Regards from Galway, Ireland ;)

05 gmc sierra, had since new. 2wd. All 4 non 4wd parts mentioned in video lasted 15+ years and over 200k miles. My biggest issues have been the driver side a/c blend door actuator, and the vent valve for the charcoal canister.

@1AAuto

3 жыл бұрын

+Br Ad Thanks for the feedback!

@LotsOfPaypa

3 жыл бұрын

Yup 4 wheel drive adds a ton of issues... Glad im in California because my 2004 2500hd has only had a water pump and alternator changed in the past 4 years!

@blakeslocum2732

2 жыл бұрын

I knew it! I’m so glad I got the rwd. Let’s be real, unless you need it, you don’t need the extra wear and tear!

I have a 2007, and the main problem I had was a brake line ruptured in the bend going under the radiator on the driver's side. I'm glad I was in a parking lot when it happened.

1999 GMC Sierra 1500. I had the brake lines go and fuel lines . The biggest problem my frame rotted out at 135kmiies. I loved the truck

I have a 1999 GMC Sierra SLT Z85 that I purchased new in '99. It has around 130,000 miles on it. I have not experienced any of the problems you mentioned but I am going to double check my front wheel bearings. Problems I have had include an ABS light and ABS Control Module that needed to be resoldered, A/C Compressor failure, rear sliding window that was replaced 3 times by the Dealer under warranty and continued to leak until I installed a 3'rd party all metal track window after it was out of warranty, 4x4 selection switch on the dash needed to be resoldered, module that controls AC fan speeds failed and was replaced, needed to clean the mass air flow sensor a couple times, replaced a sensor on the fuel injection system that was causing the truck to run rough, poles on original battery broke and replaced by Dealer under warranty, and finally I just replaced the water pump in June 2021. Southern truck with no rust anywhere. Needs a new headliner, front seat covers and a paint job due to sun fading (last black vehicle I will every buy).

@scattman3960

Жыл бұрын

All I had to do was... 😁 know how it goes brother. I'd rather chase little herenortheres for $10-$60 than putting full drivetrains in fords and such. Or $18k batteries in the dipshit electrics nowadays

Man i spent over $ 2000 dollars fixing my truck now 3 of the 5 i just learned about so thanks for the video.

@vamountainman2512

3 жыл бұрын

Geez, I only paid 2500$ for my 03 Sierra.

@stevenrogers5338

2 жыл бұрын

@@vamountainman2512 southern Cali prices are crazy high right now 6k for a V6

@robertc7531

2 жыл бұрын

@@vamountainman2512 how many miles? What kind of shape? That's a great price pending on what it needs. Shit parts alone are crazy high prices currently

My 2001 gmc #1 problem is brake lines. I have just recently replaced the fuel pump. Very reliable truck, I’ve owned it since 2003.

@blakeslocum2732

2 жыл бұрын

What’s wrong with your brake lines? I have an 01 and they don’t have any corrosion or anything. They look nearly perfect. (Granted the previous owners took very good care of the truck) I don’t hardly have any rust, only superficial in limited spots.

@ironmover322

2 жыл бұрын

Same here,, 2001 gmc,, all four brake lines have been replaced or spliced!

@jeffrickels6876

2 жыл бұрын

‘06 w/ 159K miles. All brake lines had to be replaced due to corrosion. Cincinnati area truck so lots of salt used on roads. Fuel lines are also on their way out due to corrosion as well.

Always noticed that my headlight switch doesn't seem to do anything, but didn't care to look into it. I will now order another one, thanks! I bought my 1999 GMC Sierra 2500 6.0 4wd, long-box, extended cab for $2,500 CAD with 287k in 2012. It had the engine swapped, and both front wheel bearings done by the guy I bought it from. It needed a bunch of front end parts, a new passenger window motor/regulator, and the box was in rough shape. I knew all this when I bought it, but I was only using it sparingly when I needed a truck. I just recently replaced the 2 front u-joints and transfer case front seal. I got lucky and a guy loading pine mulch into the back with a loader in 2013 wrecked my box, and their insurance put a pristine box from an '05 on complete with a new paint job for $0! Other than that I've replaced the spark plugs and fuel filter when I was having severe issues with bogging and acceleration. Runs fine now. The rocker panels are rusted both sides (central Canada...snow/salt), but I'm not sure I will bother with them as the truck still only has 297k on it 10 years later.

My 06 Sierra with a 5.3 with 165k still drives like new idles like the engine is off super smooth I love it..only issues I had is the cluster not working and wheel bearings replacement but other than that is pretty much a bulletproof truck..

@bobsbeard3977

3 жыл бұрын

I have had my 2006 Sierra for 14 years and everything was good until my I had to replace the transmission at 171,000 miles, replaced front wheel bearings twice (once at 22,000 miles and again at 184,000 miles), all front end ball joints tie rods at 185,000 miles, and the oil pump is going bad, so will likely need a new engine soon. Currently has 223,000 miles.

@jonathanLara1989

3 жыл бұрын

@@bobsbeard3977 wow yes am thinking of replacing all my suspension parts soon I’ve also had to replace wheel bearings twice as well but overall it’s been a great truck..cheaper to fix it than to buy a new one that’s for sure , specially now with car prices over the roof

Just got my gmc truck recently 105,xxx single cab 4.7 v8 loving it

Brake lines especially in the rust belt

@Dakodabonesteel

9 ай бұрын

Yup I paid $350 for 4 foot of brake like and now I have another one that’s out going to cost me $1500 all the way around times like this wish I had a place to work on my own stuff

I have a 2006 GMC SIerra 4.8 L 4WD Manual shifter on floor. Great truck. I had to resolder my instrument cluster panel board. (It went totally dead one day). works fine now. ALso replaced the idler/belt tensioner and belt. The steering shaft will develop a "clunk" that you hear when going slow speeds like in parking lots. I fixed mine by packing the steering shaft with marine grease. Someone had a video on how they did this. Took only a minute. I went through some high water and afterwards all my tail lights stopped working. It was just the wiring junction block located under the frame right behind the spare tire. Removed the block connector, cleaned the corrosion and dirt from it and reinstalled it. Easy fix. The door speakers had to be replaced as they were "buzzing". Put new shocks on it. That's about it. Super reliable vehicle. I had all the fluids changed 2 years ago. Radiator/transmission/transfer case etc. (I am in the South, so no corrosion issues). I pulled a large boat with mine for years. Use the towing switch on the gear shift. Clean the MAF sensor every so often. Makes a huge difference.

Thank you for all the info.

@1AAuto

3 жыл бұрын

+Tristin Mccann Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

I had a 1999 Sierra 1500. Put 182,000 miles on it. Only problem I had was the fuel pressure regulator. Shortly after the second fuel pressure regulator went bad, the pump in the fuel tank went bad. That was at 77,000 miles. After that it was nothing but maintenance. I miss that truck!!

Just bought a 2004 and now feel ever better about my purchase after watching this 😂

Just picked up a well used 2002 GMC SIERRA 1500 4.3 V6 vortec with 403000 miles running strong 💪but needs some TLC

@NorthernSweetPea

2 жыл бұрын

What did you pay?

excellent. Thank you very much.

I just replaced all the hard break lines today, due to rust. Upgraded to stainless lines. Took me about 6 hours to complete the job. After market lines needed some manipulation , but it worked out OK. Hopefully they last another 300K miles. Lol

The knock sensor in the Intake manifold is another big one

@powerpunch1545

3 жыл бұрын

Yeah I replaced those already lol

@michaelsager4178

3 жыл бұрын

It seems every 15,000 miles I’m replacing mine.

@GM.572

3 жыл бұрын

Yeah totally 😂

@bobbobby1846

3 жыл бұрын

there is a kit that relocates the knock sensor to the outside of the engine block and you extend the wire harness to plug into the factory connector. 1 knock sensor on each side of the block. GOOGLE LS KNOCK SENSOR RELOCATION.

Brake Lines Rusting out Fuel pump Oil pressure switch Cluster shorts out.. The Frame rotting usually towards above the rear Dif Yoke seal leaking on rear diff Transfer case leaks in between the casing Exhaust manifold bolts rott away at the corners. Oh Did I mention brake lines including the abs lines lol Parking shoes Rear backing plates rotts away Rear axles seals leaking Frozen or rotted parking cables Vent valve large leak .. Rear main seal Oil cooler lines All I can think of for now Great Video still absolutely one of my favorite trucks to work on.. #ChevySierraGmlife..

@1AAuto

3 жыл бұрын

+Gabriel Mejia-Pedroza Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

Thanks for the videos

@1AAuto

3 жыл бұрын

+murtadha fawzi Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

2004 Sierra 4x4 Crew cab SLT bought with 20k miles in 2006. Replace Water pump 2 times. Replace hot/cold actuator for front vents 2 times think it was the same one. Replaced front axle seals at around 100k miles. From 20k miles to 90k miles I pulled a 6,000 lbs camper about 7 times a year for 8 years. Replaced rear axle seals around 140k miles. Now have 3 exhaust manifold stud bolts broke off. Leak on Drivers side exhaust manifold. So that's the next thing I need to get fixed. gauge I like the truck and plan to see how many miles I can get on it. Use it as a spare vehicle and son drives it quit abit. He had a 700lbs camper in the bed for about 18 months and drove it around 15k miles with the camper and in the wind. I think that may have caused the rear axel seals to leak. Still runs good. And I didn't have to replace the Brakes until 140k miles. I do change fluids and get things fixed as soon as something is not right. So happy over all. It has been my favorite vehicle over the 40 years I have owned 17 different vehicles including wife and son's. So Thanks for the info on these trucks. I recommend them. No perfect vehicle but like this one overall. March 2020 Bought a 2016 Ford F150 Lariat for the aluminum body to avoid rust going forward. Hope the ford 2.7L Eco boost does as well as the GMC 5.3L v8 did.

Thank you so much for being so detailed I have a 2003 GMC sierra 1500 pick up truck and I have this horrible noise coming from the motor. I had recently the transmission repaired now the lever doesn’t want to go into gear for reverse so if it’s not one thing it’s another but I like the way you explain things cause it’s difficult trying to figure out what’s going on.

@1AAuto

6 ай бұрын

+@aroo4177 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

2003 5.3 4wd 128k bought new. Steering shaft. Alternator O2 sensor AC compressor Rear brakes corrosion, not salt. Door seal needed silicone caulk. Did belts, tensioners, idler several times. Headlights yellow, installed supernova leds. Doing another coolant flush with new temperature sensor and thermostat as preventative maintenance. Want to replace the crank sensor but it requires an advanced scanner tune. Looking at the Foxwell 530 scanner that is supposed to do this.

I bought one used at 40,000 miles and drove it to 120,000 before I sold it. It was a 4 wheel drive. I had to replace the front wheel bearings and the blower motor. I loved this truck!Now I have a 2018 2 wheel drive and it is also amazing!

@1AAuto

3 жыл бұрын

+Chuck Reiss Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@scottjohnson5828

3 жыл бұрын

Is this good for a used truck? With 141,791 miles for 5 grand?

@blakeslocum2732

2 жыл бұрын

@@scottjohnson5828 yes. If it’s in good condition steal it! I bought a sorted nearly mint 01’ for 10K. It had 150k when I bought it and was in excellent condition. The only thing I’ve done is the fan clutch and coolant flush. (Oh and new tires because the dealership ripped off the new ones the previous owner had…🙄)

Good information brother thanks🫡

In regards to the encoder switch issue... I had problems with my 4wd working and the problem was the push button switch on the dash. If anyone has similar issues they should check the switch first. It may save time & money 🤑

@1AAuto

3 жыл бұрын

+Tammy Burchfield Thanks for the feedback!

I've got a 2004 Sierra 5.3 SLT. I bought it in 2018 with 145,000km on it. I've put just over 100,000 on it and have done regular oil changes and preventative maintenance myself such as regular oil changes, brakes, drivetrain fluid changes, spark plugs. But I've had to replace the following since I've owned it, Radiator Wheel bearings Power steering pressure hose twice (power steering pump and lines aren't built to stand -30c up in Canada) One of the Catalytic converters (may need to change or remove the other one soon) Transfer case half (upgraded to heavy duty aluminum from magnesium for the rear half of the case due to a solenoid that rubs a hole through the top of the inside over time). The biggest issue was the camshaft replacement. One of the lifters was failing due to a siezed roller and gouged itself and the lobe of the camshaft. So I pretty much had the whole top end redone including all new gaskets for the engine and a new water pump kit, timing kit. So that was a big bullet to bite. It's rusting pretty bad now kn the cab corners and wheels wells being in Canada. But I love the truck and will drive it into the ground

A1 please help. I have a 02 gmc yukon xl 1500. Problem is the PRND321. Last weekend I was in the mountains and it started doing this. I shift to nearly and it's in neutral but the N won't light up which when I was in 4L and went to 4H it wouldn't do it because the N wouldn't illuminate. Same happens when putting it in park. It goes to park but doors won't unlock. It's not a constant thing but just comes and goes. Any ideas? Thanks

Feel pump and abs module are my biggest headaches...I also upgraded the spider Injectors

Oil pick up tube O-ring. Instrument cluster gauge stepper motors & PRNDL display.

@jonathanLara1989

3 жыл бұрын

Yes

@psor9983

3 жыл бұрын

I just test drove one today and I really like it. But the PRNDL display and odometer don't light up. How to fix that? He also said the tow button doesn't work but I don't even know what that does.

Had 3 of the 5 !

My 2003 GMC Sierra 1500 has been a good truck overall. One nagging problem is the bezels for the door switches. The plastic clips are broken that attach the bezel to the door and the bezel has to be taped in place. My understanding is the bezel must be replaced. There are several variations of the bezel which complicated the situation.

We got a 2005 at my brother's gmc long bed 🛌 and its apparently having electric power issues not the battery tho I think uts ground wire or sensors that either need replacement or its the fuse box wall or something may have gotten wet underneath the vehicle 🤔 not sure but I love the balance and the way he explained this video ill continue to to listen to you tube clips and he made sence more then the rest of them 😀 😉 thanks brotha anyone have any other ideas of what happened to our truck and why its flickers the lights but doesn't wanna crank and uts a 2005 gmc white long bed 😉

Have had wheel bearings and impact sensor go. Ripped seat, bad exhaust manifold gaskets and bolts (4/12 broken, 1 flush with head) instrument cluster went bad but got it rebuilt.

@1AAuto

3 жыл бұрын

+Alex Peters Thanks for the feedback!

Happy new year sir! Great channel and content. Can you post a video for Nissan Altima steering wheel fluid change please

@1AAuto

3 жыл бұрын

+Fishing Exchange We're always cycling through common cars. We'll add this repair to our list! Happy new year! 1aau.to/m/Shop-1AAuto-c

I have an 05 GMC 1500 I've had to replace the rear Shackles on both sides I've had to replace transmission which I find out is common for this truck but the transmission last until 250 2000 miles so it did a long time before it had issues

@ham7357

3 жыл бұрын

That’s not a long time that’s just sad. Unfortunately

Does this apply to 2001 Tahoe's and Suburbans

I just test drove one today and I really like it. But the PRNDL display and odometer don't light up. How to fix that? He also said the tow button doesn't work but I don't even know what that does. Any ideas on how to fix the tow button?

Hello I have a 2003 GMC Sierra 2wd, where can I find the Ignition Module control ( not on the steering wheel) to replace it? Thank you guys

Thanks

@1AAuto

3 жыл бұрын

+Juan saldivar Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

I have the headlight switch issue. Ive heard and seen a lot of issues with the blower motor not turning off and the abs issues

ive had the last 3. *abs engaging at low speeds.. which could go hand in hand with #3

I have a 2001 2WD (not so great during the winter months in Idaho), but it has over 320,000 miles now. My 16 year old drives it now. I also have a 2011, and it has had so many more problems than the ‘01 (had to replace collapsed AFM lifters twice). The ‘01 has its issues with that many miles, but the major components are still going strong. I know it would smoke the 2011 in a quarter mile, both have the 5.3.

I have a 2000 GMC Sierra and love it. It's only got 179,000KM on it and the only problem I've had is that two part steering column rattling. Had it replaced but I think the replacement is starting to go so.........

what type of wheel cylinder do you use for a 2005 gmc sierra 1500 , 4x4 , do you7 use a 6000 lb or a 7000 lb ?

Light switch coming in n the mail right now lol

Have a 2001 Sierra. Have had to replace both front hubs, driver side twice. On the 3rd fuel pump as well. Cannot complain for 190,000 hard miles though

fuel gage is a very common problem in my experience

Bought my 2001 GMC C3 in 2003 and most of its life the ABS and Brake light has been on, also the Fuel level gauge has not worked properly in years, Lifter noise since 2003 at least (I used to be on the piston slap forum many years ago)

@richardthomas3858

2 жыл бұрын

Crack open the abs module and re solder the joints....a new fuel pump will fix the gauge

@dmoney3336

Жыл бұрын

I have a 04 GMC Sierra same issue, including the fuel cap, abs hard code

could the encoder motor be the reason why my truck only goes into 4hi and not 4lo

Front wheel bearing at 110,000 miles for me, guess i should probably replace the other side after watching this.

I just bought a used 2006 GMC Sierra 1500, I am getting the air bag issue and will address it. My question is about an issue with on the initial start it usually takes longer than it should for the motor to turn over and when I do crank the engine the driver side door mirror glass clicks a few times then goes away after about 30 seconds or so! Once I find out whats causing these issues I will go and get the replacement parts. Thank you!

Would you guys do a video on the Lincoln Town car 03-05

@1AAuto

3 жыл бұрын

+Samuel Anderson We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

200K + miles = 2002 GMC Sierra SLT. Amazing truck (mechanically).

What about door rattle on a 99 gmc sierra. All three of my doors rattle and I got wind coming in when in the freeway

I have a problem with my front anti-lock brakes they say it might be a wheel bearing for the sensors are shot

So my truck is an 05 sierra. 4x4 5.3L Check engine light is on. My smog check guy as well as my snap on ethos diagnostics tool says it has a vacuums leak. My smog guy said change the intake manifold gaskets. I did that. Same problem. I know it’s a very simple fix. What should I check next? Thanks, John

my dads lucky that we live in the south . my dads 99 silverado ext truck has 240,000 miles and has no rust brake lines are so new you could clean them and still see the aluminum. only thing he has changed that was a major job was gas pump, water pump , intake and valve gaskets , 4 batteries but still has original motor and trans. obviously he has changed oil, tires reguraly. funny thing is he has no dash lights except the check engine which is for one 02 sensor and thats it no rust everything original and still runs great

I've had none of those problems with my 1999 Sierra. The only real problem I have had is my PRNDL display failed. The rest has been normal wear items. 👍

@MrHuck

3 жыл бұрын

I have a 99 Sierra just hit 130k miles. Replaced rear brake calipers and water pump. Other then that runs like a champ. Must of been good year. It’s actually more reliable then my 06 Civic. Honda’s supposed to be bullet proof. Oh well.

@piercesgmc9112

3 жыл бұрын

Same with me

@mikekrzesowiak7944

3 жыл бұрын

Same! I haven't fixed it, I just count everytime I shift

@CALIBREDTEXASFED619

3 жыл бұрын

My 99 Sierra odometer doesn’t work either 😅 wheel bearings this weekend. 280k miles

@blakeslocum2732

2 жыл бұрын

Just hit 160k on my 01’ step side. I have the 5.3 rwd which is awesome so pretty bulletproof. Going to totally replace the trans when it explodes with the upgraded manual model though. Not even damp yet though. Front bearings replaced, driver side caliper replaced, brake reservoir replaced. The only thing I did recently was a coolant flush and clutch fan. Suuuper easy. People said it would be hard but I just got a big wrench and a hammer, a little tap later and baby I’m free!

2005 GMC Sierra 1500 4WD 4 door, noise when foot is on the accelerator (load on the drivetrain) starting at 25mph to about 70ish mph. ONLY makes what I would call a cavitation noise when I touch the accelerator or when the truck is coasting down thru the gears. Wheel bearings still??

My 2004 Sierra 2500HD has had major cab water leaking issues. The main areas were 3rd brake light, rear window seal, rear cab vent, door weather stripping (this was a major leak) and rubber grommet for the parking brake cable thru the floor pan. Also, the oil pan leaked oil. An excellent running truck though.

I bought an 04 brand new. Had it until this past October when another driver ran a stop sign and I collided with him totaling out my truck. I had over 408,000 miles at time of wreck. Mine was a 2wd so that transfer case sensor doesn't apply. Only problem I had in this list was the turn signal multi switch. Keep in mind I already had over 300,000 miles when this failed. Wheel bearings never replaced entire life of truck. Headlight switch never had issue. Fyi this was a 1500 ext cab with 4.8 motor. My biggest issue was the factory built transmission. Only good for 100,000 miles. Had it rebuilt with upgraded parts and got well over 200,000 with no issues. Water pump replaced 3 times total. Alternator replaced 1 time. And my AC hasn't worked for the last several years only cause I never had it fixed. And the cluster gauge had to be replaced once and later I did a solder repair on it myself.

@1AAuto

3 жыл бұрын

+WW Wilkes Jr Thanks for the feedback!

@jimtownsend7899

3 жыл бұрын

Good to know, WW! I bought a used 2004 1500 SLE with the 5.3l last year. It had 202K on it, I've added another 4K. Have had only a problem with the drivers door outside door handle, had to de-rust and lubricate tailgate release and replace rod clips, and my cluster lights will go out or dim. Corrective action for the cluster is to push on the headlight switch. Suspect a bad connection, possibly corrosion. Other than that, she's a dream. Even drove it from PA to FL and back last summer to tow grandson's car down.

Will the air bag still go off ?

I have a 2001 Sierra and the only issue I'm having is from a dead stop occasionally you get a clank or a slight hiccup when applying gas pressure with a small knock sound also when starting cold there's a tiny bit of piston slap which goes away after about 20 seconds of the engine running

@kellismith4329

2 жыл бұрын

Catalytic converters are making the noise, tap the with a hammer you’ll hear the noise

What about the infernal ticking lifter?

Thinking about buying one but the guy says he replaced the computer and every time he tries to start it it blow's a fuze??? Truck has a V6 in it. Am I taking to big a chance on ?

Own 5 of these trucks in 2500. Wheel bearing is a wear problem, other more known problems are cluster, blower resistor ,plastic door handles breaking in cold,exhaust manifolds cracks and bolts breaking , intake gasket, fuel pump,

@1AAuto

3 жыл бұрын

+chachifeere Thanks for the feedback!

@wadeness9980

3 жыл бұрын

Gauge cluster for me

@chachifeere

3 жыл бұрын

@@1AAuto brake lines are number one worse idea putting steel line on the 99-06

Where does the bottom end of the negative battery cable mount?

Just replaced both headlight relays as,lights are coming on by themselves no key in ignition. Didn't clear problem Q)what else can be causing this?

2003 gmc 2500hd had to replace fuel pump twice over the years

Another one in the salt belt is the wheel speed sensors.

@W0RLDSSMALLESTVI0LIN

3 жыл бұрын

yup that happened to my 2000 Sierra recently

My 2000 needs everything lol Already replaced the both wheel hubs, fuel pump, and water pump…serpentine belt, and idler. Front and back windows Swapped the ac actuator. Needs ac compressor, ac belt and idler. Maybe the switch panel too🤷🏻‍♂️ also needs front trans Now my rear diffe blew a few days back, gota order the whole kit and needa replace the “U-joint”🤦🏻‍♂️ Someone come n buy it🤦🏻‍♂️

I have a GMC Sierra 2000 and when I'm in a red light it feels like some one just hit me from the back then it jerks a little what could it be and what's the fix

Just bought a 05 siera crew cab. Had driver side light issues, changed the bulb, went out, I would wiggle the connector then would work again. I figured out the outside Blu clip was pinching the connecters and causing a short, I removed the ble clip and have all lights working like the should.

Knock sensors rot under the air intake manifold i have a 2002 with 379000 and mine failed. I'm having issues with fuel pump ground at the moment

what about park link not working in part time 4 wd?

In tank electric fuel pump. Cut a access panel above tank . Front axel fwd motor. Evap issues Trans issue 2-3 piston fail. Otherwise excellent reliable cheap to fix truck. I have over 275k on a few work trucks. Best trucks I ever had.

I have an O2 Sensor problem all the time when it gets real cold 🥶 on a 2002 silverado but after it warms up it good 👍

@1AAuto

3 жыл бұрын

+Ryan Alan Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

can you guys make one for the 2nd gen sierra?

@1AAuto

3 жыл бұрын

+Brian We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

I have a 2001 GMC Sierra SLT and have had none of those issues. However, I do have a dashboard that tends to heat up. Can we talk about that?

@fastacker2

Жыл бұрын

Needs to have the instrument cluster removed and the PCB board resoldered. I had to do it on my '06 Sierra. I bought the proper soldering station, the right rosen flux, etc. I think just about every Chevy/GMC truck has this problem

I have a 99. You missed the actuator, and the 4wd module on the dash. Also go out often.

@papapill5262

3 жыл бұрын

i agree i bought mine with the whole module replaced and it still changes itself randomly like going from 2hi to 4hi or neutral randomly

@bruceking440

2 жыл бұрын

Just pull the TCM fuse for a few minutes and it resets. Usually no parts needed.

Ive had all them on my 03

@austind352

3 жыл бұрын

Hey I'm about to look at and 03 with 237k miles any advice for me?

2005 GMC SIERRA 1500 (new to me). Only works in 2wd and 4wd low. Put in a brand new switch, but it still won't engage into 4wd hi. Please help!

I’m having a problem with my control module trying to figure words at and I need to take it out because my light is on or do you know send me an answer thank you

My ‘06 Sierra has a Reduce Engine Power display. I changed the Throttle Body and the electrical plug too. I did the reprogram as directed and I still have reduced power. What more can I do?

@1AAuto

3 жыл бұрын

+Scott Hammon We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

I’d say the biggest one is the dash stepper motors.

So I have a 03 sierra 1500hd and the fuel gage only works sometimes so I just track milage. Could this be a easy fix ?

@timmstanfield9022

3 жыл бұрын

Most likely your float on your fuel pump is stuck unfortunately you have to pull the bed off to access it the only real fix is a new fuel pump when you start it if the guage moves at all then your gauge is fine and its most likely the fuel pump

@timmstanfield9022

3 жыл бұрын

One way to make your fuel pump last longer is to keep it at a quarter tank or higher because gas actually lubricates and cools it helping it last longer

I have seen more issues on the 1999 s with the 4 wheel drive switch than then encoder, and A LOT EASIER FIX!, mine personal 99 it has gone out 2 times

2000 sierra 2x4 sle Bad map, drive shaft carrier bearing, front wheel bearing, cd player,fuel level sender, shocks, rear leaf springs, diff lock, parking break pads, door seals, fuel pressure regulator, bought it for $50. Still love my 20 year old GMC.

With all the information you have on cars, what is the most reliable car, and what are some of the worst? Thank you in advance

@andrewtee371

3 жыл бұрын

@Pro Plat Corolla for 11 years and running 160k . Oil, air filter, motor mounts so far

i m lookin fo a 1500 sierra longbed rwd here in cntrl floride

I have a 2002 GMC Sierra 1500 extended cab pick up truck with 295,655 miles. At 260,000 miles I replace FWD Drive shaft and RWD Drive shaft , universal joints , transfer case and one more thing the oil sending unit or my oil pump.