Agreed on all points. This is the reason why I'm building up a new bike. My current bike, which is a complete, feels cheap and I have a gut feeling if I were to push it as hard as I used to, something will give in. Like Brant said, completes are great for new riders and young people but the bikes almost has a limit in longevity with the owner's progress. Even back in the late 90's I recall my friend and I, we both had entry level race bikes and the high tensile steel couldn't handle the abuse we were giving in the trails. I've built custom bikes after and its true, I never had to worry about the strength of parts, and some even transferring through multiple builds.

@Brant_Moore

5 жыл бұрын

Absolutely man! Even a higher end complete could last for a long time with a few upgrades. Like you said, it corresponds with the rider's progress. Thanks for watching!

@amonGustavo07

5 жыл бұрын

What complete ya got

@ralphchristiancajalne7982

4 жыл бұрын

Give me bmx please ☹🇵🇭🇵🇭🇵🇭

@Azzooooooo

3 жыл бұрын

@@ralphchristiancajalne7982 lol

@firedemon2166

3 жыл бұрын

Some good complete bikes like the Sunday sound wave special as an example, can take as much abuse as a custom because they basically are one from the factory

seriosuly though watch this video at 1.25x speed so he sounds normal Edit- wtf 400 likes. Looks like im not the only one who thought so

@Hehsbxje

4 жыл бұрын

this is so accurate, what the fuck

@aleksisdeagle4800

4 жыл бұрын

Life saver 😂😂

@craigsteamers331

4 жыл бұрын

How

@stz3300

4 жыл бұрын

Lmao

@zombieman832

4 жыл бұрын

Lol tru

Remember.. If you are a beginner you are not going to break anything.. Buy a good helmet and gloves. You are more at risk hurting yourself than breaking a bike

@Kronikdivaa

4 жыл бұрын

Or the size of the rider keep that in mind bucko

@joshparker1426

4 жыл бұрын

Amy jules Amy bucko over here 🥴🤣

@thebikehippie6562

3 жыл бұрын

OK OK, so, I broke my bars at the weld jumping off a 4 set. Very lucky the other weld held or I'd be missing my teeth right now, so.... My next bike will be full 4130👍

@aslams5250

3 жыл бұрын

Its true tho need to buy a helmet 👍🏻

@SixBowlSage

2 жыл бұрын

best I can do is a tire touch 😂

I like your videos a lot. Please keep them coming! Very professional, informative, and keeps the attention of your viewers.

This is why buy a higher end complete bikes that are $700 and up. I checked how much for a custom bike for me it cost $1,500

@Brant_Moore

5 жыл бұрын

Oh absolutely. There are definitely completes that are anything anyone could ever need. The Sunday Soundwave complete is an amazing bike for 1000$.

@TorryGood

5 жыл бұрын

@@Brant_Moore at least with complete you can upgrade some parts like I did with my 2017 haro mirra pro. I changed the brake because I didnt like the one came with the bike so I got demolition. Didnt like the plastic pedal so I got metal ones, changed the gyro, wasnt a fan of 20x2.4 tires since I do vert, park and got maxxis grifters 20x2.1 and handlebars because I wanted 4 piece.

@straightdooshbags1786

5 жыл бұрын

I priced up a custom s&m atf and it came out to 1700. I ended up with a soundwave v3 complete and I love it.

@Brant_Moore

5 жыл бұрын

It’s such a great deal for the price and for what you’re getting!

@gabekenyon4882

4 жыл бұрын

Kink whip 2020 full crmo al sealed hubs crmo bars crmo forks crmo cranks full sized bike for $430

I really wish my customers can all start riding bmx first then into car modification so they can understand the importance of geometry/math, physics, and how important quality material is for any parts... great video... but I think high psi tires should be in the top 5, and you should push cast stem to #6

@Brant_Moore

4 жыл бұрын

Very interesting! Isnt is amazing how much we can learn from BMX about literally anything? Haha Not a bad thought though for the stem and tires

You look like 30 year dad dressing as a edgy teenager, like that Steve Buscemi scene in 30 Rock *"How do you do fellow kids?"*

@Mike-pj1kv

5 жыл бұрын

Hey thanks for that comment. We really wanted to hear your opinion about that dude.

@JackyTMusic

3 жыл бұрын

Dudes showerhead is busted, not his fault lol

@ian_belyew

2 жыл бұрын

Underrated comment

I'm 58 and i just bought a Kink Drifter 26 in. I chose it because it has all the features you mentioned. I wanted quality because i'm sure me and it are going to hit the ground a bunch of times !

@Brant_Moore

4 жыл бұрын

Well hopefully you don’t hit the ground too many times! Haha Happy to hear that this helped you!!

I dont have much money so Ill just upgrade my mongoose bmx from walmart

@Brant_Moore

5 жыл бұрын

Gotta do what ya gotta do man! Just make sure you’re upgrading to quality parts so that you’ll be able to put them on a better frame later

@ethansk8s45

3 жыл бұрын

@@Brant_Moore holy moly broo 1 year later I got into skating instead and now im tryna restore my same walmart bmx bike I painted it and tryna make it better cant believe I found myself here again 😂

@JackyTMusic

3 жыл бұрын

@@ethansk8s45 Haha here after 19 years off bmx fixing/flatland, funny how we cycle round

Excellent choice of parts Brant! Saludos from Mexico! Huge Fan!

@Brant_Moore

4 жыл бұрын

Thank you!!!!

Great video, thanks man!

@Brant_Moore

4 жыл бұрын

Hey always happy to help and thank you!!

Got my complete bike this quarantine and will follow this tips in future upgrade. Thank you!

Thanks for the video im actually looking in to starting bmx again but checking out all the new bikes out there lol..

@Brant_Moore

Жыл бұрын

Always happy to help! If you consider getting a Fit complete or building an S&M Bike, using the code “BRANT” saves you 10% and helps me at the same time. That adds up quite a lot with an entire bike purchase! Regardless, I’m stoked to hear you’re getting back into bmx and that my videos might be able to help you with that!

I got chromoly forks bc my forks are a little bent, but like basically my dust cap for my headset cant fit over it and my spacers and maybe even my gyro plate

Just got back into this game and buying random bikes all over town in order to swap random after-market pieces into a few chimeras haha GT, Colony, Kink, Radio, Salt, etc random stuff everywhere for now! But having so much fun :)

Where did you get that odyssey sticker on your frame from

I just got my bike from when I was a kid back. It's Judy a frame now, and I can not find factory parts. Never built a bike, but I'm guessing I have to build it all aftermarket. Do you have any tips on creating a build list that is compatible with eachother?

@x88868

Жыл бұрын

This is what's actually needed.

Im getting the kink curb 2021, any upgrades i should do so they shouldnt break?

@Brant_Moore

4 жыл бұрын

Get the Whip instead

Yo, thanks for this video. I'm trynna buy a complete bike because this would be my first bmx so I'm gonna start slow. Im thinking about buying a kink bike but I really dont know exactly what I should get. If u have any good reccomdenations for a mid range complete bike that will give me my recommendations please reply.

@Brant_Moore

3 жыл бұрын

I've got a video about this specifically, but I'd suggest the Kink Whip for sure. It has everything you need

@cxtyk286

3 жыл бұрын

@@Brant_Moore ok thanks alot man. I'll be sure to look for the video u mentioned

What is faster 52t sprocket with 18t corset?

idk dude there are some great budget options for hubs and rims if you know where to look. back when i had my first custom, the alex 7000 series feather lights were a good budget option and even came on a bunch of higher tier completes and prebuilt wheels. better chrome the odyssey rims. similar strength and cheaper. that said you kinda really gotta know what to look for or have a really legit shop though. some of the more budget oriented front and rear complete wheel sets that come with a sprocket to convert a bike to micro drive are also decent.

Bro will a 12mm shorter stem help with reach a lot?

@Brant_Moore

5 жыл бұрын

That kinda depends on what issues youre having with reach. If your bars feel like theyre too far away then itll definitely help with that.

Question about a couple parts on the bike that I have coming... it is a Fit Spreit (Motorcity Metal color). It lists as having a forged topload stem...aside from someday chamging the stem for different Geometry, what is your opinion of a forged vs cnc stem? Also, I'm thinking at some point, aside from parts that wear out, the main thing I will look into replacing is getting different tires and rims, any input on some of the better double wall rims, or things to look out for? Surely all double wall rims aren't created equal... thanks again for your awesome content!

@Brant_Moore

4 жыл бұрын

Alienation Rims is what I recommend, and as far as the stem goes, I’m sure forged would be fine short term. I would not ride one for an extended period of time though. Hope this helps and thank you for being here and for the kind words!

@ArmyBoiSweat

4 жыл бұрын

As an engineer who has spent a lot of time learning how manufacturing processes change metal, forged is stronger than cnc because it compresses the metal structure creating strong spots

Hi, im gonna buy a comolete bike, and then slowly replace parts until its pretty much a custom bike if you know what I mean. But right now what im getting is fine for my first bike

@Brant_Moore

4 жыл бұрын

That’s a great way to do it as well! Hope you love it and hope this video helped enough to earn your subscription!

@RealityRoutine

3 жыл бұрын

that’s what i’m doing lol, starting on a haro midway haha

@fieldysgrl98

3 жыл бұрын

That's what i'm about to do.

I bought a 2012 wtp versus in 2019 for £40 that's been sat is some kids garage for most of the time. I just put some chain tensioners on it and road it. It's a standard bike but came with everything you mentioned in terms of component specs. I'm just a bit confused when you said only custom bikes are good if your not just starting out (I am by the way, just not a little kid). Keep up the good work!

@Brant_Moore

4 жыл бұрын

A custom bike when first starting out can be great. Usually a custom bike has better components than a complete so they will generally last longer. Unless the bike was already beat into the ground from the start.

Bro what is that camera angle you use

My front wheel is unsealed and single wall rims but back wheel is sealed but single wall too. And also my fork is crmo steerer so the leg is hi tensile. What do u recommend first for to replace ? 💪🏻

@Brant_Moore

3 жыл бұрын

It depends on what you’re doing. To me, wheels make the most sense

@aslamthecloud136

3 жыл бұрын

@@Brant_Moore okay thanks man its ok im still beginner i only do bhop and x up ride. 👍🏻

the only thing in this video that I've a actually had to replace is my frame it was a gt performer 20.5 top tube 13 chain stay and my new frame is a cult shorty 20.5 top tube and a 13 chain stay. but i would love to change my slightly bent forks soon plus i need something that isn't a starnut compression.

@Brant_Moore

11 ай бұрын

I have a code that saves you 10% on anything from S&M or Fit if you wanna save some money on some forks! Both fit and S&M have forks and the code helps me out too

im only missing a new front wheel atm to have a finished custom bike (and some pegs) but i might have to upgrade my stem again. i went from a khe stem to a forged cult salvation v5. I might have to upgrade to a salvation v4 after im done with my bike. My parts: 2 short ic cult crew bars 9.35" cult sect v4 18mm cult salvation v5 51 mm cult match v2 freecoaster back wheel cult crew cranks 165mm bad trebol khe prebuilt front wheel (single walled, wana upgrade to an eclat e440 x cortex) eclat centric pedals odyssey bluebird chain

My Hubs my Hubs, in the front and in the back, my hubs they got you...

i bought a full chromoly bike for 400 but the forks and bars still bent, but the frame is still fine.

I'll start off by saying that i like your videos, they keep me motivated to try to ride some more. So my question is: if i already have a complete which does all the bad things you mention in the video. Like single wall rims, hi-ten everything, and so on. Is it really worth upgrading it at that point or is it better to get a more expensive complete that is full cromo, sealed hubs and double wall rims? Like i can basically no tricks other than bunnyhop on top of curbs. And by a better complete i was thinking of a tall order one, mostly since they seem like nice guys. Again awesome channel.

@Brant_Moore

4 жыл бұрын

Hey thank you!!! So that kind of comes down to your budget really. If it doesn't matter how much you spend, then you might as well build the exact bike you want. If you're on a budget, then buying another complete might be the way to go, or buying a used custom bike. That depends on if you want something that's new.

@kalle3940

4 жыл бұрын

@@Brant_Moore Thank you for answering. I'm gonna think about it for a while. I really really enjoy riding but didn't expect the prices of bikes going into this haha

@Brant_Moore

4 жыл бұрын

Its not cheap, but its worth it!!!

Yea I agree on the hubs especially on the front hub bc my axle bent bc I nose dived off a 4 stair

@Brant_Moore

4 жыл бұрын

Ah hopefully you got it taken care of!

@landoncallahan5040

4 жыл бұрын

@Brant_Moore no still riding with a bent axle

How can I upgrade a standard 1-1/8 headset to a sealed one?

@Brant_Moore

5 жыл бұрын

If you have a frame with press in cups you would take out the unsealed bearing cups and put in cups that accept a sealed bearing

@treeratkomolwejakul

5 жыл бұрын

@@Brant_Moore Thank you Brant. For your information, I've riding haro leucadia now a day. I have upgrade almost the all part but headset. Because I can't find a solution. Thank you again!! cheer!!

@Brant_Moore

5 жыл бұрын

I don't know a ton about these things so I could be wrong, but I hope it helps you and I hope to see you in the comments again!!

@treeratkomolwejakul

5 жыл бұрын

@@Brant_Moore How can I show you a picture of my bike?

@Brant_Moore

5 жыл бұрын

Instagram

Good video, man. No bullcrap, I appreciate it! You kind of look like Mikey Day.

@Brant_Moore

3 жыл бұрын

Thank you!! Glad it could help you man. And that guy is hilarious, I’ll take it! Haha I love his wild style raps on Wild n out

@SKITTLELA

3 жыл бұрын

@@Brant_Moore No prob. 28 and just starting out; your suggestions are consistent with my research. I ended up ordering a 2021 Haro Interstate since I got a decent deal and couldn't find anything used that's not total crap. Haha, he really is. I liked him in the "David Blaine Street Magic" videos and think he does a fantastic job on SNL.

@Brant_Moore

3 жыл бұрын

Awesome man, should be good to learn on. Totally forgot that he was in those! Haha Cheese itz!!

I have a 30€ double wall rims will they bend super easily?

@Brant_Moore

5 жыл бұрын

Any double walled rim is better than a single walled rim.

@NGKGMR

5 жыл бұрын

@@Brant_Moore oh i got it but how much tire pressure should i put on my bike?its up to 65 psi and i do around 6-5 staircase jumps and dirt and usually just jumps, bunny hops and riding downstairs

i have a sunday blueprint and my rear hub is like weirdly loose after learning 180's... the wheel is all normal its tight, but somehow the whole driver has movement and it makes a very weird sound when doing a drop test

@Brant_Moore

5 жыл бұрын

It’s probably an unsealed hub. This is unfortunately a side effect of the corners that have to be cut on lower cost complete bikes. I would take it to a shop and see if there’s anything they can do to fix it. But if you can afford it, buying a new back hub of higher quality will definitely set you up for quite a while

@gilaaa

5 жыл бұрын

@@Brant_Moore ok thanks for the fast reply i gotta look into that. it really sounds and feels horrible

@Brant_Moore

5 жыл бұрын

Definitely take it to a local bike shop first and just ask them to look at it. If they can fix it for cheap it could be worth it but a new rear hub would be the best route because you’re going to end up needing one anyway

@gilaaa

5 жыл бұрын

@@Brant_Moore i was planning on buying a whole new complete wheel with a freecoaster anyways, is that worth it?

@Brant_Moore

5 жыл бұрын

It should be worth it in comparison to what you’ve got right now

My son is 12 and starting to ride at a higher lever.we bought him a higher end subrosa trey jones wild child.bike seems to have all quality parts everything sealed good rims hubs.machined stem ect.im not quite a lame road bmx up till about 04-05.bikes seem a world away from then.prices too.i dont think i need to upgrade anything on this bike.im i wrong?

@Brant_Moore

4 жыл бұрын

Well that frame isn’t available from subrosa as a complete bike, which leads me to believe that it was built up entirely from other parts. So I’d guess based on that that it should be good to go. Can’t say for sure without seeing a parts list, but that’d be my guess

@wolfofrhodeislandx7462

4 жыл бұрын

@@Brant_Moore thats what my son was telling us that SC bikes puts them together.it was relatively in expensive.less than 1100 to the door here in RI.i looked over it after reading your reply just now.mostly snafu compenents.and rant.the only thing i cant tell is the forks im pretty sure they are some kind of chromoly.thanks for the reply

I bought a we the people reason bike 2021 and all I need to change is the front wheel and the stem that’s not bad I love this bike it isn’t aftermarket but it’ll do full chromoly

Awesome

@Brant_Moore

2 жыл бұрын

Hope it helps!

You can get good completes chrome frame forks an bars between $350-500. Then go from there.

So i got a new complete bike full cromo frame forks bars only a single wall though but the rear hub is amazing the whole bike is sealed but yes I will probably take out the hub once i taco the rim and put the hazard light loop onto the hub

@Brant_Moore

4 жыл бұрын

Sounds like you bought the right complete! And that’s exactly why I only recommend full chromoly everything completes. You only have to worry about a couple rims instead of half of the bike

@titusallen8273

4 жыл бұрын

@@Brant_Moore won it in a contest but yeah i have a set of mission rims ill put on just till i get the money lol bmx is expensive😂 but i love it❤

Thanks. True story ;)

Just started riding on an academy entrant. Interested to see if that is a familiar model to anyone?

Dude you are so right! I did a 180 half cab and my forks bent

@Brant_Moore

5 жыл бұрын

Ahh thats a bummer to hear

@Jaqavious

5 жыл бұрын

Its alright! Thanks!

Abridged Version: BUY A FUCKING CHROMOLY BIKE GODDAMNIT

@Brant_Moore

5 жыл бұрын

hahahaha that about covers it

seriously. I bought a decent complete, only thing is it has single wall rims. spokes started coming loose just from 180s and a couple of bad bails. I’m saving up for just a double wall rear

I got a really nice complete bike, and im a beginner, i just want something that will last, its a GT Conway Team Signature with a freecoaster and its lasted me really well, all the high tensile bikes ive tried are garbage to me and feel TERRIBLE, when i try to do a bunny hop the handlebars would bend and it would make an awful noise, i have not had any problems with my cromoly bike.

@Brant_Moore

3 жыл бұрын

Heck yea good deal!! Glad to hear it

What if I have an aluminum frame?

Budget doesn't always mean bad!!! The rant rims and hubs are good! And the rant rim is like 25 bucks. I think the whole wheel is like 100 for back where maybe a bit more but definitely worth it! My friend has a rant back wheel and Its been through hundreds of flairs and Bails and its still good!

@Brant_Moore

3 жыл бұрын

Budget things can be great, but I wouldn’t recommend them over the higher tier parts because until you’ve been in bmx long enough, you just don’t know how hard you will be on parts. That guy who does all those flairs and has no problems is good enough to land in a way that won’t destroy a 25$ rim. But I’ve seen the best people completely destroy the best of the best rims on flairs. I personally am really rough on rims, but someone in the trails with no pegs might not be. So for a lot of people that budget option usually ends up meaning that you have to buy twice. So I skip all that and say buy the best stuff out the gate and just don’t worry about it and know that you’re going to be okay for a long time. I’m mainly writing this for future visitors to the comments to see the thought process behind buying quality parts the first time. It also takes a lot of knowledge to know which budget parts are okay and to a lot of people just starting theres not a lot differentiating things. I’ve seen so many parents buy kids bikes and watch them slowly have to replace things as they break or wear out. So I try to avoid that for people. It’s quite complex when you break it down but simple on the surface

I am new to BMX what should I get? Are SE bikes good for doing BMX jumps?

@Brant_Moore

3 жыл бұрын

I would look more toward core bmx brands like Sunday or Kink if you're getting a complete bike

I have single wall rims on my Bmx. Have had zero issues.. Snapped my bars though, which are hi ten Steel.. We're hi ten Steel

i wish i saw this video 3 years ago when i bought a budget bmx bike

Any advice on Trimoly frames?

@Brant_Moore

5 жыл бұрын

I’ve honestly never heard of trimoly. An alloy I’m assuming?

@bobbyvoakes6607

5 жыл бұрын

@Brant_Moore I’ve read online that it means the TT, DT and HT is CrMo and the rest is Hi Ten. I’ll be upgrading my bars and forks to CrMo in the coming months. The bike is a Ruption Friction.

@Brant_Moore

5 жыл бұрын

Ahhh, unless you’re not planning on ever leaving the ground, I wouldn’t mess with any bike that isn’t full chromoly.

What do you think about 'we the people' bikes?? I was thinking of buying one off my buddy. It's a complete

@Brant_Moore

5 жыл бұрын

Most complete bikes are very similar. It will last quite a while if it’s 100% chromoly with sealed hubs and double walled rims.

@rileyknox

5 жыл бұрын

What WTP is it? I have a 2018 Justice and it is a good bike, but the rims do need replacing because they don’t seem to stay straight.

@mattarchey85

5 жыл бұрын

I actually just bought a new kink curb. Love it !!!!

@Brant_Moore

5 жыл бұрын

Not a bad choice!

Depends. I had a 2015 Sunday AM that I jumped 8 stairs with ,hopped off loading docks, etc. After 6 years I had to replace the bars cause they got rounded in the headset ( never snapped) and later that year replaced my rims due to the cassette having problems (they were single wall rims) and now it's custom cause I bought better stuff cause I had the money but all that to say completes aren't all that cheap. Don't think your cranks are ganna snap if you hop off a curb just cause you bought a complete. And if that does happen just start over cause chances are your frame is just as cheap

got it, got it, got it, got it, got it but i have a new frame bu i hate the color so im waiting untill i can paint it a diffrent collor

@Brant_Moore

5 жыл бұрын

Nothing wrong with that! Get creative and tag me in a picture on Instagram so I can check it out

What wheels would you recommend I just bent my wheels on my kink gap?

@Brant_Moore

3 жыл бұрын

Alienation has great rims! And just make sure you get sealed hubs

@dan1el075

3 жыл бұрын

@@Brant_Moore I'm thinking of getting odessey hazard lites or gsport or alienation wheels which do you think is the best for the price?

@Brant_Moore

3 жыл бұрын

They’re all good. I ride for alienation and genuinely believe in their rims so I always have to go with them

@dan1el075

3 жыл бұрын

@@Brant_Moore I think ima get alienation wheels cause there light and strong and my favorite riders like you run them.

@MistakenMystery

3 жыл бұрын

Gsport

Instead of mass replacing parts im gonna replace them as i need to cus i aint rich

Never bought anything expensive yet but my first upgrade was a good helmet

i have my rim araya it is 18yrs old and its working fine

Plaiton UK LES GOO

Would a Sunday 2221 soundwave be ok for pro bmxers

@Brant_Moore

4 жыл бұрын

That’s the best complete bmx bike you can buy so absolutely

@sebsssrobles9112

4 жыл бұрын

Okay thanks for letting me know:)

@sebsssrobles9112

4 жыл бұрын

I hope it wasn't a bother because I'm going to get the 2221 forecaster because I can't afford the 2221 soundwave

@sebsssrobles9112

4 жыл бұрын

Is there any budget BMX bikes that you recommend

@sebsssrobles9112

4 жыл бұрын

Under 500

I have 60$ in my account and I just blew a rear wheel I'm looking for a budget rear wheel any ideas

@Brant_Moore

5 жыл бұрын

I would recommend a used wheel for that price. Any complete brand new wheel you find for that price will not last very long

@titusallen8273

5 жыл бұрын

@@Brant_Moore wow man idk why KZread didnt send me a notification can decided to thumbs down your comment anyway yeah iv been looking on offer up and all I'm finding is racing wheels like 3/4 and inch wide way to small

We need 10 cheap bike hack Brant

What’s CNC stand for?

@jamorini

3 жыл бұрын

Great video!

@Brant_Moore

3 жыл бұрын

Thank you! Computer numerical control

Wish I watched this video before buying the bike

So chromoly is good to have in your parts ? I was confused at first

@Brant_Moore

5 жыл бұрын

Yes in the parts that are usually made from chromoly. Parts like stems and sprockets are usually aluminum

Thoughts on macneil bmx brand?

@Brant_Moore

4 жыл бұрын

Which parts specifically? They are a legendary brand

@whoschinaman2200

4 жыл бұрын

@Brant_Moore The Silencer bars

@Brant_Moore

4 жыл бұрын

I actually have a pair hanging on the wall. They were alright structurally but the holes ate through grips really really fast

@whoschinaman2200

4 жыл бұрын

@Brant_Moore Hmm You think some tape around the holes will help?

@whoschinaman2200

4 жыл бұрын

@Brant_Moore also i texted you on instagram showing a dent in the crossbar you think that will affect it?

Not only skipped over a 3 piece crank, which I suppose is understandable as it's somewhat of a given, but also their available (unsurprisingly) and far better as chromoly.

Anyone looking for cheap chromoly forks Snafu/hyper make a line of forks called pickle forks there like $40

why not aircraft grade aluminum thermal forged ;)

Good video though.thanks. 👍🤙🤘🤡

Hey Brant! I need your input. I’m looking to spend under $350. Framed Defendant offers 💯 chromoly, doubled walled rims, sealed front, rear and mid. specs sound good but I’m Really not sure about buying Framed Bikes? What do you think?

@Brant_Moore

5 жыл бұрын

Those specs at that price honestly sound amazing, but I’ve never heard of that company before. Haha I’ll look into it a bit though and get back to you!

@Brant_Moore

5 жыл бұрын

Alright so to be totally honest the bikes don’t look terrible but they do look to have somewhat cheap components. The defendant is a 22” bike though, not sure if you knew

@jaimeeleeradio

5 жыл бұрын

Ya they just have some what of a cheap feel to me, the logos are all just stickers. Thank you!

@Brant_Moore

5 жыл бұрын

Yea, but their site says they're based in the Twin Cities so I'm not totally sure. I suppose it depends upon how willing you are to make a gamble Hope it helps

@trenton_ws6212

5 жыл бұрын

@@jaimeeleeradio do not buy a framed bike i broke basically everything on it literatly

I have a complete bike and the only stock parts are the stem the frame and the cranks

@Brant_Moore

5 жыл бұрын

Sounds like you've already gone through the list! haha

@masonslater2076

5 жыл бұрын

@Brant_Moore haha that and everything else broke 🤣

@Brant_Moore

5 жыл бұрын

Hahaha yep that’ll do it, won’t it?

Great video but for me, there should be atleast one picture of each item to show what it is, because a lot of people dont know anything and dont know what that parts even mean.. ❤

@Brant_Moore

Жыл бұрын

Sounds like I should revisit this one maybe then! It’s pretty old so I could probably do it better anyway

@void4761

Жыл бұрын

@@Brant_Moore i didnt mean it in a bad way its just i am from a different country and my friends and I watched your video but they understood like 2 from 5 of these so i had to search a long time for pictures to explain it to them you know?🥲✋

@Brant_Moore

Жыл бұрын

You were absolutely right though! I didn’t take it badly at all. I think I could make a newer and better version of this one

I bought the odyssey Lincoln 38mm front load for only $35.99 with s/h from flatland fuel.com

@Brant_Moore

5 жыл бұрын

Not a bad deal at all man!

What’s wrong with single wall rims

@Brant_Moore

4 жыл бұрын

They are fine for just riding around and not doing tricks or leaving the ground but as soon as you start doing those things, they bend very easily

@xxrapid_sweatxx6005

4 жыл бұрын

@Brant_Moore thank you. So your saying their good for just everyday riding and little tricks ?

Hey, I own a BMX. I bought it. Told it was an amazing BMX by my bike shop. They lied. Its all unsealed bearings and hi-ten steel, theyve lied to me so many times while buying parts and ive spent more on maintinance than I did on the bike. I replaced the back mission wheel with a stolen Rampage. And I am converting the bottom bracket. I need chromoly bars and forks

General Lee has a lot of this.

@Brant_Moore

5 жыл бұрын

The more a new complete bike has of this the better a bike it is and the longer it will probably last!

@zac.bolin01

5 жыл бұрын

@Brant_Moore general lee has most of it. He needs a new sprocket though. What would you recommend?

@Brant_Moore

5 жыл бұрын

Hmmm, other than the difference between spline drive or bolt drive, sprockets are one of those things that are mostly the same and about preference of the design. Except for guard sprockets. Those can vary a little

@zac.bolin01

5 жыл бұрын

@Brant_Moore ok

No cranks or cassettes?

@Brant_Moore

4 жыл бұрын

Cassette is included in non sealed hubs, but cranks didn’t make the top 5 because most 3 piece cranks that come on completes are chromoly and last longer than the other parts on the list

Okay your bmx hubs is 6years old but. my bike is older than me. my father bought my bike in 1985 I didn't change any parts

Most stock early 2000s haros have most of that list, and people sell them for very cheap on facebook

very informative but your monotone approach is making me want to gouge your eyes out to force a different pitch out of your voice box. other than that, good info. thanks

@Brant_Moore

5 жыл бұрын

I know I know, I suck at talking sometimes. Its just so hard to fake enthusiasm Thanks for the kind words though and thanks for watching. Ill try to make it better somehow in the future

@Mike-pj1kv

5 жыл бұрын

Then get your eyes out. If you are that sensitive and it helps you.

@steve00alt70

5 жыл бұрын

I love monotone voices

@mattarchey85

5 жыл бұрын

Dude....calm down, it's just how he talks, it's not bothering most of us. You're just one of those amateur pessimistic KZread critics who pick apart vids. Go get a better job, maybe go out and treat yourself to dinner, at least find someone to hug you for God's sake.

@KarmasAbutch

4 жыл бұрын

Ooo so “edgey”

So you want us to build a new bike ?

@Brant_Moore

5 жыл бұрын

Its something to work toward so that you have a bike that is safe for trying to do bmx tricks.

@lillee4207

4 жыл бұрын

Have a complete, swap parts, save up them buy a frame. It is easier to progress and you'll eventually have two bikes. You can sell/ trade the other bike for extra cash or if a friend wants a bike you can trade or let them borrow

You should point at areas of bike , for us dumbos lol!

At a certain point of time he says. Because chromoly isn't needed unless you're doing big things..

My bike is already got full chromoly fork bars and frame

I'm lucky to have a bike that I got every piece for so I know everything is up to this video's standards aaaand I always come back cause I got buddies that wanna get back to riding something. I tell them bmx cause it's more friendly to your wallet

Why is a 5 part list 10 minutes long?

Yeah I had to replace my pinch cranks pretty quick because they would not stay tight and it became a safety issue.

@Brant_Moore

5 жыл бұрын

Exactly! Those are definitely high on the priority list! Thanks for watching man

I've had a $40 bike for ages

Smash the singles then buy the double walls.

Back the camera up a lil next timr

I just ride it in circles

My whole bike is chromoly... damn (this is a good damn, not a bad one)

@Brant_Moore

5 жыл бұрын

That’s a good thing

@minecraftjesus4209

5 жыл бұрын

@Brant_Moore Ik it was a good damn

@Brant_Moore

5 жыл бұрын

OH! hahaha Went right over my head!

Sounds like everything on my GT Performer 98' then. That sucks. 🤦‍♂️

@Brant_Moore

4 ай бұрын

Honestly, that bike is worth hanging up and starting completely fresh. BMX has come a long way since 1998. Parts have such better geometry now that’s really meant for what we do. They’re made better so they can be lighter and with the most up to date processes.

New Forks, handle bars, rims, and frame….huh, what’s left of the original bike. Didn’t you just build a whole new bike.

@Brant_Moore

2 жыл бұрын

If the bike is not built of quality safe parts, that's the entire point. I only recommend people ride parts that are quality so that they can ride their bike without having to worry about their bike.

I broke my cranks first week loo

This is always about rear wheel. If you ride bmx you gonna know ☠️