Top 3D Printed Battery Holders/Cases - Useful and Practical 3D Prints
Ойын-сауық
Best 3D Printed Battery holders 2023
Get your models 3D printed at: www.pcbway.com/
This video is about different battery holders, which you can 3D print. If you use things, which needs batteries there are some useful and practical 3d printing ideas. These are my thoughts and printing experience. Yours can be different.
------------------------------
✎STL FILES:
15. Voronoi Dual Battery Holder: www.printables.com/model/3670...
14. Rugged box for 20x AA/AAA: cults3d.com/en/3d-model/tool/...
13. Battery AA box with rail: cults3d.com/en/3d-model/tool/...
12. Battery box for 18650: cults3d.com/en/3d-model/vario...
11. AAA battery holder print-in-place: cults3d.com/en/3d-model/gadge...
10. Missile pod-style battery holder: cults3d.com/en/3d-model/gadge...
9. Battery Carousel: www.printables.com/model/2486...
8. Battery Cases for 4 AAA: www.printables.com/model/3824...
7. LR44 battery case: cults3d.com/en/3d-model/gadge...
6. Box for CR2032 batteries: www.printables.com/model/6302...
5. Battery Double Case: www.printables.com/model/2480...
4. Multi-Use Case with Inserts: www.printables.com/model/2434...
3. All-in-One Battery box: www.printables.com/model/2515...
2. Cool stacking battery holder: cults3d.com/en/3d-model/gadge...
1. Wave FIFO Battery Holder: www.thingiverse.com/thing:341...
Dead battery container: www.thingiverse.com/thing:488...
------------------------------
✎MUSIC:
•Music from #InAudio: inaudio.org/
Infraction Music - Uplifting Anthem
Infraction Music - Slow Rock (Trap Rock)
• Mulholland - King Canyon
• Hot Heat - Topher Mohr and Alex Elena
------------------------------
✎3D PRINTER: Sovol SV01 Pro, Creality Ender 5 S1, Creality Ender 3 V2
------------------------------
✎FILAMENTS:
eryone3d.com/
www.filalab.lt/
------------------------------
✎FACEBOOK: / 3d-printsbuilds-101348...
✎INSTAGRAM: @3dprintsbuilds
✎TikTok: @3dprintsbuilds
✎Cults3d: cults3d.com/en/users/3DPrints...
✎THINGIVERSE: www.thingiverse.com/3dprintsb...
#3dPrinting #Timelapse #useful
------------------------------
✎CONTENT:
0:00 - Intro
0:14 - Voronoi Dual Battery Holder
1:27 - Rugged box for 20x AA/AAA
2:22 - Battery AA box with rail
3:01 - Battery box for 18650
3:56 - PCBWay Ad
4:29 - AAA battery holder print-in-place
5:20 - Missile pod-style battery holder
6:17 - Battery Carousel
7:05 - Battery Cases for 4 AAA
7:48 - LR44 battery case
8:34 - Box for CR2032 batteries
9:19 - Battery Double Case
9:53 - Multi-Use Case with Inserts
11:33 - All-in-One Battery box
12:21 - Cool stacking battery holder
13:05 - Wave FIFO Battery Holder
14:04 - Dead battery container
Пікірлер: 17
Would love to see a similar video for larger lithium cells 👍
i love that you also say the negative aspects of each print. i am just going to print the cool stacking box for time and money reasons.
Thanks for testing out the battery holders. That is a lot of printing! As you discovered, some designs are good some...not so good but we are spoiled with all the wonderful choices.
@3DPrintsBuilds
Жыл бұрын
Thanks for watching!
Very well presented
@3DPrintsBuilds
Жыл бұрын
Thanks!
Great vedeo 😁
@3DPrintsBuilds
Жыл бұрын
Thanks!
❤❤
I'm having an issue with my printer I know this Is a shot in the dark but my ender 3v2 was running great then it started having some extruding issues.. so took it apart cleaned it then put it back together now I go to print it warms up then says print stopped. Does nothing else..any ideas?
@3DPrintsBuilds
Жыл бұрын
Maybe thermistor/temperature sensor got damaged, when you took it apart. I have took mine apart many times so I think it's not the problem. One thing you can try is slice file again and if it's not working try another SD card. Some times SD cards fail. I had problems printing stopped mid print and I replace SD card fixed it.
@JNKM-rl1wu
Жыл бұрын
@3D Prints&Builds yeah I did not take the thremo block out so I don't think that's it.. ive tried several different sd cards all do the same .. cards work fine on another printer. Maybe needs to be reflashed with hardware?
I’m shocked at the time this takes to print things. One box took 4 days?? This doesn’t seem at all cost effective at all. Thoughts please! Cheers!
@3DPrintsBuilds
5 ай бұрын
You can 3D Print things what you can't get nowhere. (Yes, in this video are some things you can buy) You can make customized things. So about the time and cost. Yes 3D printing takes time. The printer I used is not very fast and I also used slower speeds, because my timelapse settings. There are much faster 3D printers available. I also have now. About the cost. 3D printers don't use much power. Running cost are quite low.
@nxxynx5039
2 ай бұрын
A lot of things you can leave nearly totally hollow, this drastically reduces the time to a few hours
Top 15 for memori cads, plise.
@3DPrintsBuilds
Жыл бұрын
Thanks for the idea!